- 14 Feb, 2017 13 commits
-
-
Dmitry Torokhov authored
commit 601bbbe0 upstream. If user tries to initialize uinput device mixing old and new style initialization (i.e. using old UI_SET_ABSBIT instead of UI_ABS_SETUP, we forget to allocate input->absinfo and will crash when trying to send absolute events: ioctl(ui, UI_DEV_SETUP, &us); ioctl(ui, UI_SET_PHYS, "Test"); ioctl(ui, UI_SET_EVBIT, EV_ABS); ioctl(ui, UI_SET_ABSBIT, ABS_X); ioctl(ui, UI_SET_ABSBIT, ABS_Y); ioctl(ui, UI_DEV_CREATE, 0); Reported-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=191811 Fixes: fbae10db ("Input: uinput - rework ABS validation") Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vineet Gupta authored
commit a524c218 upstream. Reported-by:
Jo-Philipp Wich <jo@mein.io> Fixes: 9aed02fe ("ARC: [arcompact] handle unaligned access delay slot") Cc: linux-kernel@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Gary R Hook authored
commit e5da5c56 upstream. Eliminate a double-add by creating a new list to manage command descriptors when created; move the descriptor to the pending list when the command is submitted. Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Gary R Hook authored
commit 500c0106 upstream. An I/O page fault occurs when the IOMMU is enabled on a system that supports the v5 CCP. DMA operations use a Request ID value that does not match what is expected by the IOMMU, resulting in the I/O page fault. Setting the Request ID value to 0 corrects this issue. Signed-off-by:
-
Giovanni Cabiddu authored
commit 685ce062 upstream. Zero embedded ram in DH85x devices. This is not needed for newer generations as it is done by HW. Signed-off-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
-
Giovanni Cabiddu authored
commit 3484ecbe upstream. Some accelerators of the c62x series have only two bars. This patch skips BAR0 if the accelerator does not have it. Signed-off-by:
-
Harsh Jain authored
commit f5f7bebc upstream. Ensure dev is allocated for crypto uld context before using the device for crypto operations. Signed-off-by:
Atul Gupta <atul.gupta@chelsio.com> Signed-off-by:
-
Harsh Jain authored
commit 0b529f14 upstream. Kernel panics when userspace program try to access AEAD interface. Remove node from Linked List before freeing its memory. Signed-off-by:
Harsh Jain <harsh@chelsio.com> Reviewed-by:
Stephan Müller <smueller@chronox.de> Signed-off-by:
-
Mike Snitzer authored
commit 4087a1ff upstream. Fixes a crash in dm_table_find_target() due to a NULL struct dm_table being passed from dm_old_request_fn() that races with DM device destruction. Reported-by: artem@flashgrid.io Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Dan Williams authored
commit bfb34527 upstream. When vmemmap_populate() allocates space for the memmap it does so in 2MB sized chunks. The libnvdimm-pfn driver incorrectly accounts for this when the alignment of the device is set to 4K. When this happens we trigger memory allocation failures in altmap_alloc_block_buf() and trigger warnings of the form: WARNING: CPU: 0 PID: 3376 at arch/x86/mm/init_64.c:656 arch_add_memory+0xe4/0xf0 [..] Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 arch_add_memory+0xe4/0xf0 devm_memremap_pages+0x29b/0x4e0 Fixes: 315c5625 ("libnvdimm, pfn: add 'align' attribute, default to HPAGE_SIZE") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit 9d032f42 upstream. Given that the naming of pmem devices changes from the pmemX form to the pmemX.Y form when namespace id is greater than 0, arrange for namespaces with id-0 to be exempt from deletion. Otherwise a simple reconfiguration of an existing namespace to a new mode results in a name change of the resulting block device: # ndctl list --namespace=namespace1.0 { "dev":"namespace1.0", "mode":"raw", "size":2147483648, "uuid":"3dadf3dc-89b9-4b24-b20e-abc8a4707ce3", "blockdev":"pmem1" } # ndctl create-namespace --reconfig=namespace1.0 --mode=memory --force { "dev":"namespace1.1", "mode":"memory", "size":2111832064, "uuid":"7b4a6341-7318-4219-a02c-fb57c0bbf613", "blockdev":"pmem1.1" } This change does require tooling changes to explicitly look for namespaceX.0 if the seed has already advanced to another namespace. Fixes: 98a29c39 ("libnvdimm, namespace: allow creation of multiple pmem-namespaces per region") Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Dan Williams authored
commit e471486c upstream. We queue an on-stack work item to 'nfit_wq' and wait for it to complete as part of a 'flush_probe' request. However, if the user cancels the wait we need to make sure the item is flushed from the queue otherwise we are leaving an out-of-scope stack address on the work list. BUG: unable to handle kernel paging request at ffffbcb3c72f7cd0 IP: [<ffffffffa9413a7b>] __list_add+0x1b/0xb0 [..] RIP: 0010:[<ffffffffa9413a7b>] [<ffffffffa9413a7b>] __list_add+0x1b/0xb0 RSP: 0018:ffffbcb3c7ba7c00 EFLAGS: 00010046 [..] Call Trace: [<ffffffffa90bb11a>] insert_work+0x3a/0xc0 [<ffffffffa927fdda>] ? seq_open+0x5a/0xa0 [<ffffffffa90bb30a>] __queue_work+0x16a/0x460 [<ffffffffa90bbb08>] queue_work_on+0x38/0x40 [<ffffffffc0cf2685>] acpi_nfit_flush_probe+0x95/0xc0 [nfit] [<ffffffffc0cf25d0>] ? nfit_visible+0x40/0x40 [nfit] [<ffffffffa9571495>] wait_probe_show+0x25/0x60 [<ffffffffa9546b30>] dev_attr_show+0x20/0x50 Fixes: 7ae0fa43 ("nfit, libnvdimm: async region scrub workqueue") Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
-
Srinivas Pandruvada authored
commit 6e978b22 upstream. Some Kabylake desktop processors may not reach max turbo when running in HWP mode, even if running under sustained 100% utilization. This occurs when the HWP.EPP (Energy Performance Preference) is set to "balance_power" (0x80) -- the default on most systems. It occurs because the platform BIOS may erroneously enable an energy-efficiency setting -- MSR_IA32_POWER_CTL BIT-EE, which is not recommended to be enabled on this SKU. On the failing systems, this BIOS issue was not discovered when the desktop motherboard was tested with Windows, because the BIOS also neglects to provide the ACPI/CPPC table, that Windows requires to enable HWP, and so Windows runs in legacy P-state mode, where this setting has no effect. Linux' intel_pstate driver does not require ACPI/CPPC to enable HWP, and so it runs in HWP mode, exposing this incorrect BIOS configuration. There are several ways to address this problem. First, Linux can also run in legacy P-state mode on this system. As intel_pstate is how Linux enables HWP, booting with "intel_pstate=disable" will run in acpi-cpufreq/ondemand legacy p-state mode. Or second, the "performance" governor can be used with intel_pstate, which will modify HWP.EPP to 0. Or third, starting in 4.10, the /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference attribute in can be updated from "balance_power" to "performance". Or fourth, apply this patch, which fixes the erroneous setting of MSR_IA32_POWER_CTL BIT_EE on this model, allowing the default configuration to function as designed. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
- 09 Feb, 2017 27 commits
-
-
Greg Kroah-Hartman authored
-
Chris Wilson authored
commit bafb2f7d upstream. There is a disparity in the context image saved to disk and our own bookkeeping - that is we presume the RING_HEAD and RING_TAIL match our stored ce->ring->tail value. However, as we emit WA_TAIL_DWORDS into the ring but may not tell the GPU about them, the GPU may be lagging behind our bookkeeping. Upon hibernation we do not save stolen pages, presuming that their contents are volatile. This means that although we start writing into the ring at tail, the GPU starts executing from its HEAD and there may be some garbage in between and so the GPU promptly hangs upon resume. Testcase: igt/gem_exec_suspend/basic-S4 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-3-chris@chris-wilson.co.uk Cc: Eric Blau <eblau1@gmail.com> Signed-off-by:
-
Michal Hocko authored
commit d1908f52 upstream. Tetsuo has noticed that an OOM stress test which performs large write requests can cause the full memory reserves depletion. He has tracked this down to the following path __alloc_pages_nodemask+0x436/0x4d0 alloc_pages_current+0x97/0x1b0 __page_cache_alloc+0x15d/0x1a0 mm/filemap.c:728 pagecache_get_page+0x5a/0x2b0 mm/filemap.c:1331 grab_cache_page_write_begin+0x23/0x40 mm/filemap.c:2773 iomap_write_begin+0x50/0xd0 fs/iomap.c:118 iomap_write_actor+0xb5/0x1a0 fs/iomap.c:190 ? iomap_write_end+0x80/0x80 fs/iomap.c:150 iomap_apply+0xb3/0x130 fs/iomap.c:79 iomap_file_buffered_write+0x68/0xa0 fs/iomap.c:243 ? iomap_write_end+0x80/0x80 xfs_file_buffered_aio_write+0x132/0x390 [xfs] ? remove_wait_queue+0x59/0x60 xfs_file_write_iter+0x90/0x130 [xfs] __vfs_write+0xe5/0x140 vfs_write+0xc7/0x1f0 ? syscall_trace_enter+0x1d0/0x380 SyS_write+0x58/0xc0 do_syscall_64+0x6c/0x200 entry_SYSCALL64_slow_path+0x25/0x25 the oom victim has access to all memory reserves to make a forward progress to exit easier. But iomap_file_buffered_write and other callers of iomap_apply loop to complete the full request. We need to check for fatal signals and back off with a short write instead. As the iomap_apply delegates all the work down to the actor we have to hook into those. All callers that work with the page cache are calling iomap_write_begin so we will check for signals there. dax_iomap_actor has to handle the situation explicitly because it copies data to the userspace directly. Other callers like iomap_page_mkwrite work on a single page or iomap_fiemap_actor do not allocate memory based on the given len. Fixes: 68a9f5e7 ("xfs: implement iomap based buffered write path") Link: http://lkml.kernel.org/r/20170201092706.9966-2-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Steve Wise authored
commit b414fa01 upstream. The current QP FetchBurstMax value is 256B, which is incorrect since a WR can exceed that value. The result being a partial WR fetched by hardware, and a fatal "bad WR" error posted by the SGE. So bump the FetchBurstMax to 512B. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
commit aaaec6fc upstream. The recent commit which prevents double activation of interrupts unearthed interesting code in x86. The code (ab)uses irq_domain_activate_irq() to reconfigure an already activated interrupt. That trips over the prevention code now. Fix it by deactivating the interrupt before activating the new configuration. Fixes: 08d85f3e "irqdomain: Avoid activating interrupts more than once" Reported-and-tested-by:
Mike Galbraith <efault@gmx.de> Reported-and-tested-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311901580.3457@nanosSigned-off-by:
-
Marc Zyngier authored
commit 08d85f3e upstream. Since commit f3b0946d ("genirq/msi: Make sure PCI MSIs are activated early"), we can end-up activating a PCI/MSI twice (once at allocation time, and once at startup time). This is normally of no consequences, except that there is some HW out there that may misbehave if activate is used more than once (the GICv3 ITS, for example, uses the activate callback to issue the MAPVI command, and the architecture spec says that "If there is an existing mapping for the EventID-DeviceID combination, behavior is UNPREDICTABLE"). While this could be worked around in each individual driver, it may make more sense to tackle the issue at the core level. In order to avoid getting in that situation, let's have a per-interrupt flag to remember if we have already activated that interrupt or not. Fixes: f3b0946d ("genirq/msi: Make sure PCI MSIs are activated early") Reported-and-tested-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1484668848-24361-1-git-send-email-marc.zyngier@arm.comSigned-off-by:
-
Matt Ranostay authored
commit 828f84ee upstream. FIFO was being read every sample after the "almost full" state was reached. This was due to an incorrect placement of the parenthesis in the while condition check. Note - the fixes tag is not actually correct, but the fix in this patch would also be needed for it to function correctly so we'll go with that one. Backports should pick up both. Signed-off-by:
Matt Ranostay <matt@ranostay.consulting> Fixes: b74fccad ("iio: health: max30100: correct FIFO check condition") Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
John Brooks authored
commit 5c113b5e upstream. The DHT22 (AM2302) datasheet specifies that the LOW start pulse should not exceed 20ms. However, observations with an oscilloscope of an RPi Model 2B (rev 1.1) communicating with a DHT22 sensor showed that the driver was consistently sending start pulses longer than 20ms: Kernel 4.7.10-v7+ (n=132): Minimum pulse length: 20.20ms Maximum: 29.84ms Mean: 24.96ms StDev: 2.82ms Sensor response rate: 100% Read success rate: 76% On kernel 4.8, the start pulse was so long that the sensor would not even respond 97% of the time: Kernel 4.8.16-v7+ (n=100): Minimum pulse length: 30.4ms Maximum: 74.4ms Mean: 39.3ms StDev: 10.2ms Sensor response rate: 3% Read success rate: 3% The driver would return ETIMEDOUT and write log messages like this: [ 51.430987] dht11 dht11@0: Only 1 signal edges detected [ 66.311019] dht11 dht11@0: Only 0 signal edges detected Replacing msleep(18) with usleep_range(18000, 20000) made the pulse length sane again and restored responsiveness: Kernel 4.8.16-v7+ with usleep_range (n=123): Minimum pulse length: 18.16ms Maximum: 20.20ms Mean: 19.85ms StDev: 0.51ms Sensor response rate: 100% Read success rate: 84% Signed-off-by:
John Brooks <john@fastquake.com> Reviewed-by:
Harald Geyer <harald@ccbib.org> Signed-off-by:
-
Alison Schofield authored
commit a5badd1e upstream. The suspend/resume functions were using dev_to_iio_dev() to get the iio_dev. That only works on IIO dev's. Replace it with spi functions to get the correct iio_dev. Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Acked-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Alison Schofield authored
commit 802ecfc1 upstream. The suspend/resume functions were using dev_to_iio_dev() to get the iio_dev. That only works on IIO dev's. Replace it with i2c functions to get the correct iio_dev. Signed-off-by:
-
Alison Schofield authored
commit d1aaf20e upstream. The suspend/resume functions were using dev_to_iio_dev() to get the iio_dev. That only works on IIO dev's. Use dev_get_drvdata() for a platform device to get the correct iio_dev. Signed-off-by:
-
Rui Miguel Silva authored
commit b17c1bba upstream. When tearingdown timesync, and not in arche platform, the state platform callback is not initialized. That will trigger the following NULL dereferencing. CallTrace: ? gb_timesync_platform_unlock_bus+0x11/0x20 [greybus] gb_timesync_teardown+0x85/0xc0 [greybus] gb_timesync_svc_remove+0xab/0x190 [greybus] gb_svc_del+0x29/0x110 [greybus] gb_hd_del+0x14/0x20 [greybus] ap_disconnect+0x24/0x60 [gb_es2] usb_unbind_interface+0x7a/0x2c0 __device_release_driver+0x96/0x150 device_release_driver+0x1e/0x30 bus_remove_device+0xe7/0x130 device_del+0x116/0x230 usb_disable_device+0x97/0x1f0 usb_disconnect+0x80/0x260 hub_event+0x5ca/0x10e0 process_one_work+0x126/0x3b0 worker_thread+0x55/0x4c0 ? process_one_work+0x3b0/0x3b0 kthread+0xc4/0xe0 ? kthread_park+0xb0/0xb0 ret_from_fork+0x22/0x30 So, fix that by adding checks before use the callback. Fixes: 970dc85b ("greybus: timesync: Add timesync core driver") Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Bjørn Mork authored
commit 5d03a2fd upstream. Yet another laptop vendor rebranded Novatel E371. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Vincent Pelletier authored
commit 83e526f2 upstream. OS descriptor head, when flagged as provided, is accessed without checking if it fits in provided buffer. Verify length before access. Also, there are other places where buffer length it checked after accessing offsets which are potentially past the end. Check buffer length before as well to fail cleanly. Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Tony Lindgren authored
commit 407788b5 upstream. Commit 467d5c98 ("usb: musb: Implement session bit based runtime PM for musb-core") started implementing musb generic runtime PM support by introducing devctl register session bit based state control. This caused a regression where if a USB mass storage device is connected to a USB hub, we can get: usb 1-1: reset high-speed USB device number 2 using musb-hdrc usb 1-1: device descriptor read/64, error -71 usb 1-1.1: new high-speed USB device number 4 using musb-hdrc This is because before the USB storage device is connected, musb is in OTG_STATE_A_SUSPEND. And we currently only set need_finish_resume in musb_stage0_irq() and the related code calling finish_resume_work in musb_resume() and musb_runtime_resume() never gets called. To fix the issue, we can call schedule_delayed_work() directly in musb_stage0_irq() to have finish_resume_work run. And we should no longer never get interrupts when when suspended. We have changed musb to no longer need pm_runtime_irqsafe(). The need_finish_resume flag was added in commit 9298b4aa ("usb: musb: fix device hotplug behind hub") and no longer applies as far as I can tell. So let's just remove the earlier code that no longer is needed. Fixes: 467d5c98 ("usb: musb: Implement session bit based runtime PM for musb-core") Reported-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Lukáš Lalinský authored
commit d9b2997e upstream. Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218, idProduct=0401). The device reports that it has config string descriptor at index 3, but when the system selects the configuration and tries to get the description, it returns a -EPROTO error, the communication restarts and this keeps repeating over and over again. Not requesting the string descriptor makes the device work correctly. Relevant info from Wireshark: [...] CONFIGURATION DESCRIPTOR bLength: 9 bDescriptorType: 0x02 (CONFIGURATION) wTotalLength: 101 bNumInterfaces: 2 bConfigurationValue: 1 iConfiguration: 3 Configuration bmAttributes: 0xc0 SELF-POWERED NO REMOTE-WAKEUP 1... .... = Must be 1: Must be 1 for USB 1.1 and higher .1.. .... = Self-Powered: This device is SELF-POWERED ..0. .... = Remote Wakeup: This device does NOT support remote wakeup bMaxPower: 50 (100mA) [...] 45 0.369104 host 2.38.0 USB 64 GET DESCRIPTOR Request STRING [...] URB setup bmRequestType: 0x80 1... .... = Direction: Device-to-host .00. .... = Type: Standard (0x00) ...0 0000 = Recipient: Device (0x00) bRequest: GET DESCRIPTOR (6) Descriptor Index: 0x03 bDescriptorType: 0x03 Language Id: English (United States) (0x0409) wLength: 255 46 0.369255 2.38.0 host USB 64 GET DESCRIPTOR Response STRING[Malformed Packet] [...] Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0 USB URB [Source: 2.38.0] [Destination: host] URB id: 0xffff88021f62d480 URB type: URB_COMPLETE ('C') URB transfer type: URB_CONTROL (0x02) Endpoint: 0x80, Direction: IN Device: 38 URB bus id: 2 Device setup request: not relevant ('-') Data: present (0) URB sec: 1484896277 URB usec: 455031 URB status: Protocol error (-EPROTO) (-71) URB length [bytes]: 0 Data length [bytes]: 0 [Request in: 45] [Time from request: 0.000151000 seconds] Unused Setup Header Interval: 0 Start frame: 0 Copy of Transfer Flags: 0x00000200 Number of ISO descriptors: 0 [Malformed Packet: USB] [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)] [Malformed Packet (Exception occurred)] [Severity level: Error] [Group: Malformed] Signed-off-by:
Lukáš Lalinský <lukas@oxygene.sk> Signed-off-by:
-
Marcel J.E. Mol authored
commit d07830db upstream. Seems that ATEN serial-to-usb devices using pl2303 exist with different device ids. This patch adds a missing device ID so it is recognised by the driver. Signed-off-by:
Marcel J.E. Mol <marcel@mesa.nl> Signed-off-by:
-
Aleksander Morgado authored
commit 24d615a6 upstream. The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by default boot with vid 0x413c and pid 0x81a3. When triggered QDL download mode, the device switches to pid 0x81a6 and provides the standard TTY used for firmware upgrade. Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Radim Krčmář authored
commit 00c87e9a upstream. Saving unsupported state prevents migration when the new host does not support a XSAVE feature of the original host, even if the feature is not exposed to the guest. We've masked host features with guest-visible features before, with 4344ee98 ("KVM: x86: only copy XSAVE state for the supported features") and dropped it when implementing XSAVES. Do it again. Fixes: df1daba7 ("KVM: x86: support XSAVES usage in the host") Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Tony Lindgren authored
commit 362f4562 upstream. Commit fdea2d09 ("dmaengine: cppi41: Add basic PM runtime support") together with recent MUSB changes allowed USB and DMA on BeagleBone to idle when no cable is connected. But looks like few corner case issues still remain. Looks like just by re-plugging USB cable about ten or so times on BeagleBone when configured in USB peripheral mode we can get warnings and eventually trigger an oops in cppi41 DMA: WARNING: CPU: 0 PID: 14 at drivers/dma/cppi41.c:1154 cppi41_runtime_suspend+ x28/0x38 [cppi41] ... WARNING: CPU: 0 PID: 14 at drivers/dma/cppi41.c:452 push_desc_queue+0x94/0x9c [cppi41] ... Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = c0004000 [00000104] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM ... [<bf0d92cc>] (cppi41_runtime_resume [cppi41]) from [<c0589838>] (__rpm_callback+0xc0/0x214) [<c0589838>] (__rpm_callback) from [<c05899ac>] (rpm_callback+0x20/0x80) [<c05899ac>] (rpm_callback) from [<c0589460>] (rpm_resume+0x504/0x78c) [<c0589460>] (rpm_resume) from [<c058a1a0>] (pm_runtime_work+0x60/0xa8) [<c058a1a0>] (pm_runtime_work) from [<c0156120>] (process_one_work+0x2b4/0x808) This is because of a race with runtime PM and cppi41_dma_issue_pending() as reported by Alexandre Bailon <abailon@baylibre.com> in earlier set of patches. Based on mailing list discussions we however came to the conclusion that a different fix from Alexandre's fix is needed in order to guarantee that DMA is really active when we try to use it. To fix the issue, we need to add a driver specific flag as we otherwise can have -EINPROGRESS state set by runtime PM and can't rely on pm_runtime_active() to tell us when we can use the DMA. And we need to make sure the DMA transfers get triggered in the queued order. So let's always queue the transfers, then flush the queue from both cppi41_dma_issue_pending() and cppi41_runtime_resume() as suggested by Grygorii Strashko <grygorii.strashko@ti.com> in an earlier example patch. For reference, this is also documented in Documentation/power/runtime_pm.txt in the example at the end of the file as pointed out by Grygorii Strashko <grygorii.strashko@ti.com>. Based on earlier patches from Alexandre Bailon <abailon@baylibre.com> and Grygorii Strashko <grygorii.strashko@ti.com> modified based on testing and what was discussed on the mailing lists. Fixes: fdea2d09 ("dmaengine: cppi41: Add basic PM runtime support") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Bin Liu <b-liu@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Patrick Titiano <ptitiano@baylibre.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reported-by:
Alexandre Bailon <abailon@baylibre.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Tony Lindgren authored
commit ae4a3e02 upstream. Commit fdea2d09 ("dmaengine: cppi41: Add basic PM runtime support") added runtime PM support for cppi41, but had corner case issues. Some of the issues were fixed with commit 098de42a ("dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected"). That fix however caused a new regression where we can get error -115 messages with USB on BeagleBone when connecting a USB mass storage device to a hub. This is because when connecting a USB mass storage device to a hub, the initial DMA transfers can take over 200ms to complete and cppi41 autosuspend delay times out. To fix the issue, we want to implement refcounting for chan_busy array that contains the active dma transfers. Increasing the autosuspend delay won't help as that the delay could be potentially seconds, and it's best to let the USB subsystem to deal with the timeouts on errors. The earlier attempt for runtime PM was buggy as the pm_runtime_get/put() calls could get unpaired easily as they did not follow the state of the chan_busy array as described in commit 098de42a ("dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected". Let's fix the issue by adding pm_runtime_get() to where a new transfer is added to the chan_busy array, and calls to pm_runtime_put() where chan_busy array entry is cleared. This prevents any autosuspend timeouts from happening while dma transfers are active. Fixes: 098de42a ("dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected") Fixes: fdea2d09 ("dmaengine: cppi41: Add basic PM runtime support") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Bin Liu <b-liu@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Patrick Titiano <ptitiano@baylibre.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Thomas Gleixner authored
commit 1aa6cfd3 upstream. The recent conversion to the hotplug state machine kept two mechanisms from the original code: 1) The first_init logic which adds the number of online CPUs in a package to the refcount. That's wrong because the callbacks are executed for all online CPUs. Remove it so the refcounting is correct. 2) The on_each_cpu() call to undo box->init() in the error handling path. That's bogus because when the prepare callback fails no box has been initialized yet. Remove it. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jason Gerecke authored
commit 282e4637 upstream. Commit 025bcc15 performed cleanup work on the 'wacom_pl_irq' function, making it follow the standards used in the rest of the codebase. The change unintiontionally allowed the function to send input events from reports that are not marked as being in prox. This can cause problems as the report values for X, Y, etc. are not guaranteed to be correct. In particular, occasionally the tablet will send a report with these values set to zero. If such a report is received it can caus an unexpected jump in the XY position. This patch surrounds more of the processing code with a proximity check, preventing these zeroed reports from overwriting the current state. To be safe, only the tool type and ABS_MISC events should be reported when the pen is marked as being out of prox. Fixes: 025bcc15 ("HID: wacom: Simplify 'wacom_pl_irq'") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Ardinartsev Nikita authored
commit 877a021e upstream. With NOGET quirk Logitech F510 is now fully workable in dinput mode including rumble effects (according to fftest). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117091 [jkosina@suse.cz: fix patch format] Signed-off-by:
Ardinartsev Nikita <ardinar23@gmail.com> Acked-by:
-
Colin Ian King authored
commit ed9ab428 upstream. Quirking the following AMI USB device with ALWAYS_POLL fixes an AMI virtual keyboard and mouse from not responding and timing out when it is attached to a ppc64el Power 8 system and when we have some rapid open/closes on the mouse device. usb 1-3: new high-speed USB device number 2 using xhci_hcd usb 1-3: New USB device found, idVendor=046b, idProduct=ff01 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: Virtual Hub usb 1-3: Manufacturer: American Megatrends Inc. usb 1-3: SerialNumber: serial usb 1-3.3: new high-speed USB device number 3 using xhci_hcd usb 1-3.3: New USB device found, idVendor=046b, idProduct=ff31 usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3.3: Product: Virtual HardDisk Device usb 1-3.3: Manufacturer: American Megatrends Inc. usb 1-3.4: new low-speed USB device number 4 using xhci_hcd usb 1-3.4: New USB device found, idVendor=046b, idProduct=ff10 usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3.4: Product: Virtual Keyboard and Mouse usb 1-3.4: Manufacturer: American Megatrends Inc. With the quirk I have not been able to trigger the issue with half an hour of saturation soak testing. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Johannes Berg authored
commit 03c902bf upstream. When the firmware restarts in a situation in which any station has no queue reserved anymore because that queue was used, the code will crash trying to access the queue_info array at the offset 255, which is far too big. Fix this by checking that a queue is actually reserved before writing its status. Fixes: 8d98ae6e ("iwlwifi: mvm: re-assign old queues after hw restart in dqa mode") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Jürg Billeter authored
commit 7941c59e upstream. Mistakenly, the driver is trying to load the 8000C firmware with an incorrect name (i.e. with two hyphens where there should be only one) and that fails. Fix that by removing the hyphen from the format macro. Fixes: e1ba684f ("iwlwifi: 8000: fix MODULE_FIRMWARE input") Signed-off-by:
Jürg Billeter <j@bitron.ch> Signed-off-by:
-
