- 19 Oct, 2015 6 commits
-
-
Chenny Xu authored
before this patch, hns driver only permits user to set the net device by using ethtool -s when the device is link up. it is obviously not so good. it needs to be set no matter it is link up or down. so this patch fixes this issue. Signed-off-by:
yankejian <yankejian@huawei.com> Signed-off-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
lisheng <lisheng011@huawei.com> Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
Chenny Xu <chenny.xu@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
huangdaode says: ==================== net: hisilicon fix some bugs in HNS drivers This patchset fixes the two bugs in HNS driver, one is remove the hnae sysfs interface according to the review comments from Arnd Bergmann <arnd@arndb.de>, another is fixing the wrong mac_id judgement bug which is found during internal tests. change log: v3: remove the hnae sysfs interface. v2: 1) remove first bug fix, which is fixed in another patch submitted by Arnd Bergmann <arnd@arndb.de> 2) change the code sytyle according to Joe. v1: initial version. ==================== Signed-off-by: -
huangdaode authored
This patch fixes the wrong judgement of mac_id when get port num. Signed-off-by:
huangdaode <huangdaode@hisilicon.com> Signed-off-by:
-
huangdaode authored
This patch removes the hns driver hnae sysfs interface according to Arnd's review comments. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arun Parameswaran authored
The 'bcm-phy-lib.c', added as a part of the commit "net: phy: Add Broadcom phy library for common interfaces" was missing the module license. This was causing an issue when the library is built as a module; "module license 'unspecified' taints kernel". This patch fixes the issue by adding the module license, author and description to the bcm-phy-lib.c file. Fixes: a1cba561 ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by:
Arun Parameswaran <arunp@broadcom.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Li RongQing authored
A dhcp server may provide parameters to a client from a pool of IP addresses and using a shared rootfs, or provide a specific set of parameters for a specific client, usually using the MAC address to identify each client individually. The dhcp protocol also specifies a client-id field which can be used to determine the correct parameters to supply when no MAC address is available. There is currently no way to tell the kernel to supply a specific client-id, only the userspace dhcp clients support this feature, but this can not be used when the network is needed before userspace is available such as when the root filesystem is on NFS. This patch is to be able to do something like "ip=dhcp,client_id_type, client_id_value", as a kernel parameter to enable the kernel to identify itself to the server. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
- 16 Oct, 2015 34 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Driver update, add initial support for Spectrum ASIC Purpose of this patchset is to introduce initial support for Mellanox Spectrum ASIC, including L2 bridge forwarding offload. The only non-mlxsw patch in this patchset is the first one, introducing pre-change upper notifier. That is used in last patch to ensure ports of single ASIC are not bridged into multiple bridges, as that scenario is currently not supported by driver. ==================== Signed-off-by: -
Jiri Pirko authored
Add support for new generation Mellanox Spectrum ASIC, 10/25/40/50 and 100Gb/s Ethernet Switch. The initial driver implements bridge forwarding offload including bridge internal VLAN support, FDB static entries, FDB learning and HW ageing including their setup. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Since we currently do not support the offloading of 802.1D bridges, we need to be able to let the device know it should not learn MAC addresses on specific {Port, VID} pairs. Add the SPVMLR register, which controls the learning enablement of {Port, VID} pairs. Signed-off-by: -
Jiri Pirko authored
Add SFDAT which is used to control switch ageing time. Signed-off-by:
-
Ido Schimmel authored
In order for a port to support {Port, VID} to FID mapping it needs to be configured to a virtual port mode (as opposed to VLAN mode). Add the SVPE register, which enables port virtualization. Signed-off-by: -
Ido Schimmel authored
An incoming packet can be classified into a filtering identifer (FID) based on its VID or incoming port and VID ({Port, VID}). Add the SVFA register, which controls this mapping. Signed-off-by: -
Ido Schimmel authored
Filtering identifiers (FIDs) are unique identifers of bridge instances in the hardware. Add the SFMR register, which is responsible for the creation and configuration of these FIDs. Signed-off-by:
-
Jiri Pirko authored
Add definitions of SBPR, SBCM, SBPM, SBMM and PBMC registers that are used to configure shared buffers. Signed-off-by:
-
Elad Raz authored
Add SPVID and SPVM registers responsible for default port VID configuration and VLAN membership of a port. Signed-off-by:
-
Jiri Pirko authored
Add SFN register which is used to poll for newly added and aged-out FDB entries. Signed-off-by:
-
Jiri Pirko authored
Add the SFD register which is responsible for filtering database manipulation, including static and dynamic FDB entries. Signed-off-by:
-
Jiri Pirko authored
Add missing item helper which allows to access char bufs on multiple offsets. This is needed by SFD and SFN register definitions. Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Ido Schimmel authored
Packets destined to offloaded netdevs will be classified to FIDs in the device and flooded in case of BUM. The flooding table used is of type FID-offset, which allows one to create different flooding domains for different FIDs and specify the offset in the flooding table for each FID (not necessarily equal to FID or VID). Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by:
-
Ido Schimmel authored
In the newly introduced Spectrum switch ASIC, packets destined to not offloaded netdevs will be classified to special FIDs (vFIDs) in the device and flooded to the CPU port. The flooding table used is of type per-FID, which allows one to create different flooding domains for different vFIDs. While using a simple single-entry flood table is certainly sufficient at this point, we do plan to offload 802.1D bridges involving VLAN interfaces, thus making this change necessary. Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by:
-
Ido Schimmel authored
As part of the introduction of L2 offloads, allow different ports to join/leave the flooding domain, according to user configuration. Signed-off-by:
-
Jiri Pirko authored
This newly introduced netdevice notifier is called before actual change upper happens. That provides a possibility for notifier handlers to know upper change will happen and react to it, including possibility to forbid the change. That is valuable for drivers which can check if the upper device linkage is supported and forbid that in case it is not. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-16 This series contains updates to e1000, e1000e, igb, igbvf, ixgbe, ixgbevf, i40e, i40evf and fm10k. Alex Duyck fixes the polling routine for i40e/i40evf were the NAPI budget for receive cleanup was being rounded up to 1 but the netpoll call was expecting no Rx to be processed as the budget passed was 0. Also cleaned up IN_NETPOLL flag that was not adding any value due to the receive cleanup was handled in NAPI. Added support for netpoll for i40evf as well. Jesse updates all of our drivers to use napi_complete_done() instead of napi_complete(), which allows us to use /sys/class/net/ethX/gro_flush_timeout. Added ethtool support to control and report the new Interrupt Limit register, since the XL710 hardware has a different interrupt moderation design that can support a limit of total interrupts per second per vector. Shannon cleans up startup log entries to cut down the number by putting a couple behind debug flags and combining others into single line. Added support to enable/disable printing VEB statistics via ethtool. Jingjing fixes a compile issue by adding const to functions that return strings that are not going to be modified. Greg Rose cleans up defines that were not used and were causing customer confusion. Greg Bowers adds support for setting a new bit in the Set Local LLDP MIB admin queue command Type field. Mitch fixes an issue where vlan_features field was set to the same value as netdev features field, but before the features were actually being set up, leaving the vlan_features empty. Resolve the issue by setting up the netdev features first, then mask out the VLAN feature bits when assigning vlan_features. Fixed VF init timing, where in some instances the VFs would fail to initialize the first time you loaded the driver. To correct this, increased the delay time for the init task and wait longer before giving up. v2: fix missing space in function header comment in patch 3, based on feedback from Sergei Shtylyov. ==================== Signed-off-by: -
Catherine Sullivan authored
Bump. Change-ID: I7ec818a507554648675b9b245ced9e6b6bd9ed4e Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
With 64 VFs, we can easily overwhelm the AQ on the PF if we have too low a limit on the number of AQ requests. This leads to ARQ overflow errors, and occasionally VFs that fail to initialize. Since we really only hit this condition on initial VF driver load, the requests that we process are lightweight, so this extra work doesn't cause problems for the PF driver. Change-ID: I620221520d8af987df6ace9ba938ffaf22107681 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
On some devices, in some systems, in some configurations, the VFs would fail to initialize the first time you loaded the driver. To correct this, increase the delay time for the init task slightly, and wait longer before giving up. If we enable VFs and load the VF driver in the same kernel as the PF driver, we can totally overwhelm the PF driver with AQ requests because all of the instances try to initialize at the same time. To help alleviate this, stagger the initial scheduling of the init task using the PCIe function as a multiplier. We mask off the function to only three bits so no instance has to wait too long. With these two changes, initializing 128 VFs on a single device goes from four minutes to just a few seconds. Change-ID: If3d8720c1c4e838ab36d8781d9ec295a62380936 Signed-off-by:
-
Catherine Sullivan authored
1000Base_T_Optical got added to the function that figures out what is supported when link is down but not when link is up. Add it in there too so that we display the correct information. Change-ID: I85ebcdfa7c02d898c44c673b1500552a53c8042e Signed-off-by:
-
Mitch Williams authored
The vlan_features field was correctly being set to the same value as the netdev features field. However, this was being done before the features were actually being set up, leaving the vlan_features empty. Also, after a reset, vlan_features will be incorrectly assigned the previous netdev feature flags, which can contain VLAN feature bits. This makes the VLAN code angry and will cause a stack dump. To fix these issues, set up the netdev features first, then mask out the VLAN feature bits when assigning vlan_features. Change-ID: Ib0548869dc83cf6a841cb8697dd94c12359ba4d2 Signed-off-by:
-
Jingjing Wu authored
When the number of invalid messages from a VF is exceeded, the VF will be disabled, due to the invalid messages. This happens if other VF drivers (like DPDK) send a message through the driver's mailbox (aka virtchannel) interface, but the message is not supported by the i40e pf driver, such as CONFIG_PROMISCUOUS_MODE. This patch changes the num_invalid_msgs in struct i40e_vf to record the continuous invalid msgs, and it will be reset when a valid msg is received. Change-ID: Iaec42fd3dcdd281476b3518be23261dd46fc3718 Signed-off-by:
Jingjing Wu <jingjing.wu@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Jesse Brandeburg authored
The XL710 hardware has a different interrupt moderation design that can support a limit of total interrupts per second per vector, in addition to the "number of interrupts per second" controls already established in the driver. This combination of hardware features allows us to set very low default latency settings but minimize the total CPU utilization by not making too many interrupts, should the user desire. The current driver implementation is still enabling the dynamic moderation in the driver, and only using the rx/tx-usecs limit in ethtool to limit the interrupt rate per second, by default. The new code implemented in this patch 2) adds init/use of the new "Interrupt Limit" register 3) adds ethtool knob to control/report the limits above Usage is ethtool -C ethx rx-usecs-high <value> Where <value> is number of microseconds to create a rate of 1/N interrupts per second, regardless of rx-usecs or tx-usecs values. Since there is a credit based scheme in the hardware, the rx-usecs and tx-usecs can be configured for very low latency for short bursts, but once the credit runs out the refill rate on the credits is limited by rx-usecs-high. Change-ID: I3a1075d3296123b0f4f50623c779b027af5b188d Signed-off-by:
-
Greg Bowers authored
Adds support for setting a new bit in the Set Local LLDP MIB AQ command Type field. When set to 1, the bit indicates to FW that Apps should be treated as non-willing. When 0, FW behaves as before. Change-ID: I0d2101c1606c59c7188d3e6a0c7810e0f205233a Signed-off-by:
Greg Bowers <gregory.j.bowers@intel.com> Tested-by:
-
Shannon Nelson authored
Add an ethtool priv flag to enable and disable printing the VEB statistics. Change-ID: I7654054a3a73b08aa8310d94ee8fce6219107dd8 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Greg Rose authored
Two defines that are not used are causing customer confusion - remove them. Change-ID: Icef0325aca8e0f4fcdfc519e026bdd375e791200 Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
-
Shannon Nelson authored
Allow the nvmupdate application to decide when a read or write error should be exposed to the user. Since the application needs to use write probes to find the ReadOnly sections on a potentially unknown NVM version in the HW and read probes to check the status of the last write, some error messages are expected, but need not be shown to the users. The driver doesn't know which are ignorable from real errors, so needs to let the application make the decision. Change-ID: I78fca8ab672bede11c10c820b83c26adfd536d03 Signed-off-by:
-
Jingjing Wu authored
Add const to functions that return strings that aren't going to be modified. This addresses some reported compile complaints. Change-ID: Ic56b1e814ab4d23a50480e7fdec652445f776ee8 Signed-off-by:
-
Shannon Nelson authored
Cut down on the number of startup log entries by putting a couple behind debug flags and combining a couple others into a single line. Change-ID: I708089f086308f84d43f8b6f0e8a634a02d058fb Signed-off-by:
-
Jesse Brandeburg authored
As per Eric Dumazet's previous patches: (see commit (24d2e4a5) - tg3: use napi_complete_done()) Quoting verbatim: Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. </end quote> Tested configuration: low latency via ethtool -C ethx adaptive-rx off rx-usecs 10 adaptive-tx off tx-usecs 15 workload: streaming rx using netperf TCP_MAERTS igb: MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1176930056 1475.36 797726 16384.00 71905 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1175182320 50476.00 23282 16384.00 71816 i40e: Hard to test because the traffic is incoming so fast (24Gb/s) that GRO always receives 87kB, even at the highest interrupt rate. Other drivers were only compile tested. Signed-off-by:
-
Alexander Duyck authored
Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Tested-by:
-
Alexander Duyck authored
The code in i40e and i40evf is using an "IN_NETPOLL" flag that has never added any value due to the fact that the Rx clean-up is handled in NAPI. As such the flag was set, the queue was scheduled via NAPI, and then polled from the netpoll controller and if any Rx packets were processed the were processed in the wrong context. In addition the flag itself just added an unneeded conditional to the hot-path so it can safely be dropped and save us a few instructions. Signed-off-by:
-
