- 13 Jun, 2012 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville authored
Conflicts: drivers/net/wireless/ath/ath9k/main.c net/bluetooth/hci_event.c
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
Rajkumar Manoharan authored
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
remove MCI_STATE_BT and use bt_state instead. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
As p_data is unuse, lets remove it from ar9003_mci_state. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Add a MCI util function to send wlan channel info to BT. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Add a utility function to set bluetooth version and remove MCI_STATE_SET_BT_COEX_VERSION. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Add utility functions to get and test GPM offset and remove MCI_STATE*_GPM_OFFSET states. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
steps to recreate: load latest ath9k driver with AR9485 stop the network-manager and wpa_supplicant bring the interface up Call Trace: [<ffffffffa0517490>] ? ath_hw_check+0xe0/0xe0 [ath9k] [<ffffffff812cd1e8>] __const_udelay+0x28/0x30 [<ffffffffa03bae7a>] ar9003_get_pll_sqsum_dvc+0x4a/0x80 [ath9k_hw] [<ffffffffa05174eb>] ath_hw_pll_work+0x5b/0xe0 [ath9k] [<ffffffff810744fe>] process_one_work+0x11e/0x470 [<ffffffff8107530f>] worker_thread+0x15f/0x360 [<ffffffff810751b0>] ? manage_workers+0x230/0x230 [<ffffffff81079af3>] kthread+0x93/0xa0 [<ffffffff815fd3a4>] kernel_thread_helper+0x4/0x10 [<ffffffff81079a60>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815fd3a0>] ? gs_change+0x13/0x13 ensure that the PLL-WAR for AR9485/AR9340 is executed only if the STA is associated (or) IBSS/AP mode had started beaconing. Ideally this WAR is needed to recover from some rare beacon stuck during stress testing. Before the STA is associated/IBSS had started beaconing, PLL4(0x1618c) always seem to have zero even though we had configured PLL3(0x16188) to query about PLL's locking status. When we keep on polling infinitely PLL4's 8th bit(ie check for PLL locking measurements is done), machine hangs due to softlockup. fixes https://bugzilla.redhat.com/show_bug.cgi?id=811142Reported-by: Rolf Offermanns <rolf.offermanns@gmx.net> Cc: stable@vger.kernel.org Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
* Reset duty cycle before updating btcoex scheme. Otherwise duty cycle reaches max limit and never be reduced again * Adjust duty cycle with proper BDR profile value Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
As btcoex scheme updation might sleep, remove the function call from tasklet context and queue it up as a separate work. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
btcoex periord is converted into micro seconds during initialization and converted back to milli seconds while starting timer. As MCI code handles btcoex period in msec, lets keep the btcoex timer in msec and convert them into other form whenever needed. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
This patch simplifies profile management utility functions. * Separate find_profile from add/del functions * Return correct values when the profile list is empty or profile is ot found * flush the profiles when there are entries in the list Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
let us process MCI interrupts only when BTCOEX is enabled to avoid processing bogus interrupts. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
After a full reset, mci_reset will put LNA update to the setting for 2G mode. Those registers need to be forced to update when the channel is in 5G. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Both "MAC Warm Reset" and "MCI Reset Rx" will reset GPM HW write_ptr. We should check software cached write_ptr against HW write_ptr before reset. Otherwise the pending DMA data will be lost. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
The HW statemachine is sometimes found stuck in the state WL_LNA_CTRL_DISABLE when BT is in sleep, which will cause TX_HOLD always asserted and resmgr stuck in PENDING_TX state Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Not doing so, could cause imbalance in powersave count. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Choose legacy rate as the last rate of Multi Rate Retry series if and only if the last selected rate is MCS and having higher PER rate. The current code fills a legacy rate as last one even though the previous rates in the series are having good PER value. This could limit the aggregation that affects the uplink performance. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Adjust quick_drop value in the baseband AGC register to improve RX in HT20 mode. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The structure brcmf_sdio contains a number of counters that are useful for debugging. These were not available in user-space. This patch exposes them in debugfs under the filename 'counters'. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
This patch adds debugfs support to brcmfmac. It provide helper functions to setup the debugfs folder structure for the driver, which has following hierarchy: <debugfs_mount>/brcmfmac/<dev_name>/ ie.: /sys/kernel/debug/brcmfmac/mmc0:0001:2/ The new source file provides functions to create and remove the two folders and a function to retrieve the device-specific folder so files can be created in it. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
This patch fixes potential NULL pointer dereference in ampdu. This was found running smatch static code checker. Smatch warning says: drivers/net/wireless/brcm80211/brcmsmac/ampdu.c:741 brcms_c_sendampdu() warn: variable dereferenced before check 'p' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The function brcms_set_hint() does not add any functionality so regulatory_hint() can be called directly. The error value has been removed from the message when regulatory_hint() fails. Reported-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
steps to recreate: load latest ath9k driver with AR9485 stop the network-manager and wpa_supplicant bring the interface up Call Trace: [<ffffffffa0517490>] ? ath_hw_check+0xe0/0xe0 [ath9k] [<ffffffff812cd1e8>] __const_udelay+0x28/0x30 [<ffffffffa03bae7a>] ar9003_get_pll_sqsum_dvc+0x4a/0x80 [ath9k_hw] [<ffffffffa05174eb>] ath_hw_pll_work+0x5b/0xe0 [ath9k] [<ffffffff810744fe>] process_one_work+0x11e/0x470 [<ffffffff8107530f>] worker_thread+0x15f/0x360 [<ffffffff810751b0>] ? manage_workers+0x230/0x230 [<ffffffff81079af3>] kthread+0x93/0xa0 [<ffffffff815fd3a4>] kernel_thread_helper+0x4/0x10 [<ffffffff81079a60>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815fd3a0>] ? gs_change+0x13/0x13 ensure that the PLL-WAR for AR9485/AR9340 is executed only if the STA is associated (or) IBSS/AP mode had started beaconing. Ideally this WAR is needed to recover from some rare beacon stuck during stress testing. Before the STA is associated/IBSS had started beaconing, PLL4(0x1618c) always seem to have zero even though we had configured PLL3(0x16188) to query about PLL's locking status. When we keep on polling infinitely PLL4's 8th bit(ie check for PLL locking measurements is done), machine hangs due to softlockup. fixes https://bugzilla.redhat.com/show_bug.cgi?id=811142Reported-by: Rolf Offermanns <rolf.offermanns@gmx.net> Cc: stable@vger.kernel.org [3.0+] Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
-
David Spinadel authored
Stop connection monitor poll during disassociation. This clears the polling flags and if a scan was deferred it will be run. Without this fix, if a scan was deferred due to connection monitoring while disassociation happens, this scan blocks further scan requests until interface down/up which causes problems connecting to another AP. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Eliad Peller authored
Otherwise, we might call the driver callback before the interface was uploaded. Solves the following warning: WARNING: at net/mac80211/driver-ops.h:12 ieee80211_set_bitrate_mask+0xbc/0x18c [mac80211]() wlan0: Failed check-sdata-in-driver check, flags: 0x0 Modules linked in: wlcore_sdio wl12xx wl18xx wlcore mac80211 cfg80211 [last unloaded: cfg80211] [<c001b964>] (unwind_backtrace+0x0/0x12c) from [<c0495550>] (dump_stack+0x20/0x24) [<c0495550>] (dump_stack+0x20/0x24) from [<c003ee28>] (warn_slowpath_common+0x5c/0x74) [<c003ee28>] (warn_slowpath_common+0x5c/0x74) from [<c003eefc>] (warn_slowpath_fmt+0x40/0x48) [<c003eefc>] (warn_slowpath_fmt+0x40/0x48) from [<bf5c1ad0>] (ieee80211_set_bitrate_mask+0xbc/0x18c [mac80211]) [<bf5c1ad0>] (ieee80211_set_bitrate_mask+0xbc/0x18c [mac80211]) from [<bf575960>] (nl80211_set_tx_bitrate_mask+0x350/0x358 [cfg80211]) [<bf575960>] (nl80211_set_tx_bitrate_mask+0x350/0x358 [cfg80211]) from [<c03e9e94>] (genl_rcv_msg+0x1a8/0x1e8) [<c03e9e94>] (genl_rcv_msg+0x1a8/0x1e8) from [<c03e9164>] (netlink_rcv_skb+0x5c/0xc0) [<c03e9164>] (netlink_rcv_skb+0x5c/0xc0) from [<c03e9ce0>] (genl_rcv+0x28/0x34) [<c03e9ce0>] (genl_rcv+0x28/0x34) from [<c03e8e74>] (netlink_unicast+0x158/0x234) [<c03e8e74>] (netlink_unicast+0x158/0x234) from [<c03e93e0>] (netlink_sendmsg+0x218/0x298) [<c03e93e0>] (netlink_sendmsg+0x218/0x298) from [<c03b4e5c>] (sock_sendmsg+0xa4/0xc0) [<c03b4e5c>] (sock_sendmsg+0xa4/0xc0) from [<c03b5af4>] (__sys_sendmsg+0x1d8/0x254) [<c03b5af4>] (__sys_sendmsg+0x1d8/0x254) from [<c03b5ca8>] (sys_sendmsg+0x4c/0x70) [<c03b5ca8>] (sys_sendmsg+0x4c/0x70) from [<c0013980>] (ret_fast_syscall+0x0/0x3c) Note that calling the driver can also result in undefined behaviour since it doesn't have to deal with calls while down. Signed-off-by: Eliad Peller <eliad@wizery.com> [removed timestamps, added note - Johannes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Eliad Peller authored
reg_timeout_work() calls restore_regulatory_settings() which takes cfg80211_mutex. reg_set_request_processed() already holds cfg80211_mutex before calling cancel_delayed_work_sync(reg_timeout), so it might deadlock. Call the async cancel_delayed_work instead, in order to avoid the potential deadlock. This is the relevant lockdep warning: cfg80211: Calling CRDA for country: XX ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.0-rc5-wl+ #26 Not tainted ------------------------------------------------------- kworker/0:2/1391 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211] but task is already holding lock: ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((reg_timeout).work){+.+...}: [<c008fd44>] validate_chain+0xb94/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c005b600>] wait_on_work+0x4c/0x154 [<c005c000>] __cancel_work_timer+0xd4/0x11c [<c005c064>] cancel_delayed_work_sync+0x1c/0x20 [<bf28b274>] reg_set_request_processed+0x50/0x78 [cfg80211] [<bf28bd84>] set_regdom+0x550/0x600 [cfg80211] [<bf294cd8>] nl80211_set_reg+0x218/0x258 [cfg80211] [<c03c7738>] genl_rcv_msg+0x1a8/0x1e8 [<c03c6a00>] netlink_rcv_skb+0x5c/0xc0 [<c03c7584>] genl_rcv+0x28/0x34 [<c03c6720>] netlink_unicast+0x15c/0x228 [<c03c6c7c>] netlink_sendmsg+0x218/0x298 [<c03933c8>] sock_sendmsg+0xa4/0xc0 [<c039406c>] __sys_sendmsg+0x1e4/0x268 [<c0394228>] sys_sendmsg+0x4c/0x70 [<c0013840>] ret_fast_syscall+0x0/0x3c -> #1 (reg_mutex){+.+.+.}: [<c008fd44>] validate_chain+0xb94/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c04734dc>] mutex_lock_nested+0x48/0x320 [<bf28b2cc>] reg_todo+0x30/0x538 [cfg80211] [<c0059f44>] process_one_work+0x2a0/0x480 [<c005a4b4>] worker_thread+0x1bc/0x2bc [<c0061148>] kthread+0x98/0xa4 [<c0014af4>] kernel_thread_exit+0x0/0x8 -> #0 (cfg80211_mutex){+.+.+.}: [<c008ed58>] print_circular_bug+0x68/0x2cc [<c008fb28>] validate_chain+0x978/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c04734dc>] mutex_lock_nested+0x48/0x320 [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211] [<bf28b200>] reg_timeout_work+0x1c/0x20 [cfg80211] [<c0059f44>] process_one_work+0x2a0/0x480 [<c005a4b4>] worker_thread+0x1bc/0x2bc [<c0061148>] kthread+0x98/0xa4 [<c0014af4>] kernel_thread_exit+0x0/0x8 other info that might help us debug this: Chain exists of: cfg80211_mutex --> reg_mutex --> (reg_timeout).work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((reg_timeout).work); lock(reg_mutex); lock((reg_timeout).work); lock(cfg80211_mutex); *** DEADLOCK *** 2 locks held by kworker/0:2/1391: #0: (events){.+.+.+}, at: [<c0059e94>] process_one_work+0x1f0/0x480 #1: ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480 stack backtrace: [<c001b928>] (unwind_backtrace+0x0/0x12c) from [<c0471d3c>] (dump_stack+0x20/0x24) [<c0471d3c>] (dump_stack+0x20/0x24) from [<c008ef70>] (print_circular_bug+0x280/0x2cc) [<c008ef70>] (print_circular_bug+0x280/0x2cc) from [<c008fb28>] (validate_chain+0x978/0x10f0) [<c008fb28>] (validate_chain+0x978/0x10f0) from [<c0090b68>] (__lock_acquire+0x8c8/0x9b0) [<c0090b68>] (__lock_acquire+0x8c8/0x9b0) from [<c0090d40>] (lock_acquire+0xf0/0x114) [<c0090d40>] (lock_acquire+0xf0/0x114) from [<c04734dc>] (mutex_lock_nested+0x48/0x320) [<c04734dc>] (mutex_lock_nested+0x48/0x320) from [<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211]) [<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211]) from [<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211]) [<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211]) from [<c0059f44>] (process_one_work+0x2a0/0x480) [<c0059f44>] (process_one_work+0x2a0/0x480) from [<c005a4b4>] (worker_thread+0x1bc/0x2bc) [<c005a4b4>] (worker_thread+0x1bc/0x2bc) from [<c0061148>] (kthread+0x98/0xa4) [<c0061148>] (kthread+0x98/0xa4) from [<c0014af4>] (kernel_thread_exit+0x0/0x8) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Cc: stable@kernel.org Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Emmanuel Grumbach authored
This flow can actually happen due to a corner case in mac80211: the station is deleted before we get a chance to reclaim all the packets in flight in AGG queue. The tid_data for this station is zeroed, and we lose the match with the Tx queue. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Since request_module_nowait() can't be backported use request_module() instead -- we don't need the asynchronous behaviour of request_module_nowait() here since we're running in the firmware request work struct. Tested-by: Donald H Fry <donald.h.fry@intel.com> Reviewed-by: Donald H Fry <donald.h.fry@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Due to commit 26a7ca9a ("iwlwifi: refactor EEPROM reading/parsing") adding a new parameter, while commit d2c8b15d ("iwlwifi: use correct supported firmware for 6035 and 6000g2") added a new device structure we need to add the parameter to the new device structure to make 6035 device work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
-
Emmanuel Grumbach authored
For AGG queues, we must match between the WiFi sequence number and the TFD number. This is a HW (SCD) requirement. This is a take two of my iwlwifi: add debug in Tx path in AGG flow This will allow us to catch bad cases in which the packets aren't in the right place on the ring. which disappeared during code move. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Emmanuel Grumbach authored
In fragmentation we don't update the write pointer of the HW immediately. So we shouldn't modify the timer in that case. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Dan Carpenter authored
CMD_SYNC is zero so the if (cmd->flags & CMD_SYNC) is never true and we never check the assertion. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Emmanuel Grumbach authored
Since the queue gets stuck from time to time, we are trying to get as much information as we can when this occurs. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-