Merge tag 'sunxi-dt-h5-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64

Allwinner H5 DT changes for 4.12

H5 patches for 4.12, which are mostly related to reworking the H3 DTSI to
be usable on the arm64 H5 DTSI, that shares almost everything with the H3
but the CPU cores.

We then have patches to support the H5 boards on top.

* tag 'sunxi-dt-h5-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: sunxi: h3/h5: switch apb0-related clocks to r_ccu
  arm64: allwinner: h5: enable USB OTG on Orange Pi PC 2 board
  arm64: allwinner: h5: add support for the Orange Pi PC 2 board
  arm64: allwinner: h5: add Allwinner H5 .dtsi
  ARM: sunxi: h3/h5: add usb_otg and OHCI/EHCI for usbc0 on H3/H5
  arm: sun8i: h3: split Allwinner H3 .dtsi
  arm: sun8i: h3: correct the GIC compatible in H3 to gic-400
  arm: sun8i: h3: drop pinctrl-a10.h inclusion for H3 DTSI
  arm: sun8i: h3: drop skeleton.dtsi inclusion in H3 DTSI
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt64-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64

Allwinner arm64 DT changes for 4.12

Some patches to enable the PRCM block in the A64

* tag 'sunxi-dt64-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: a64: add R_PIO pinctrl node
  arm64: allwinner: a64: add r_ccu node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64-redo' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic 64-bit DT updates for v4.12
- pinctrl: new pins for audio
- clocks: more clocks exposed for GFX, audio
- new board: Khadas Vim (S905X)
- new board: HwaCom AmazeTV (S905X)
- ethernet phy: add GPIO resets

* tag 'amlogic-dt64-redo' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (41 commits)
  ARM64: dts: meson-gx: Add support for HDMI output
  ARM64: dts: meson-gx: Add shared CMA dma memory pool
  ARM64: dts: meson-gxbb-odroidc2: Enable SARADC node
  dt-bindings: clock: gxbb-clkc: Add GXL compatible variant
  clk: meson-gxbb: Expose GP0 dt-bindings clock id
  clk: meson-gxbb: Add MALI clock IDS
  dt-bindings: clk: gxbb: expose i2s output clock gates
  ARM64: dts: meson-gxl: add spdif output pins
  ARM64: dts: meson-gxl: add i2s output pins
  ARM64: dts: meson-gxbb: add spdif output pins
  ARM64: dts: meson-gxbb: add i2s output pins
  ARM64: dts: meson-gxbb: Add USB Hub GPIO hog
  ARM: dts: meson8b: Add gpio-ranges properties
  ARM: dts: meson8: Add gpio-ranges properties
  ARM64: dts: meson-gxl: Add gpio-ranges properties
  ARM64: dts: meson-gxbb: Add gpio-ranges properties
  ARM64: dts: meson-gx: Add Mali nodes for GXBB and GXL
  ARM64: dts: meson-gxl: Add missing pinctrl pins groups
  ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
  ARM64: dts: meson-gx: empty line cleanup
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Amlogic clock headers and DT binding updates for v4.12
- add clocks for I2S and Mali

# gpg: Signature made Tue Apr  4 16:07:50 2017 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@kernel.org>" [ultimate]
# gpg:                 aka "Kevin Hilman <khilman@deeprootsystems.com>" [ultimate]
# gpg:                 aka "Kevin Hilman <khilman@gmail.com>" [ultimate]
# gpg:                 aka "Kevin Hilman <khilman@baylibre.com>" [ultimate]

* tag 'amlogic-clk-headers':
  dt-bindings: clock: gxbb-clkc: Add GXL compatible variant
  clk: meson-gxbb: Expose GP0 dt-bindings clock id
  clk: meson-gxbb: Add MALI clock IDS
  dt-bindings: clk: gxbb: expose i2s output clock gates

Add HDMI output and connector nodes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

The HDMI modes needs more CMA memory to be reserved at boot-time.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Now that 3adbf342 "iio: adc: add a driver for the SAR ADC found in
Amlogic Meson SoCs" has added support for the ADC, let's enable it
on Odroid C2.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490178747-14837-6-git-send-email-narmstrong@baylibre.com

This patch exposes the GP0 PLL clock id in the dt bindings.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490178747-14837-5-git-send-email-narmstrong@baylibre.com

Add missing MALI clock IDs and expose the muxes and gates in the dt-bindings.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490177935-9646-2-git-send-email-narmstrong@baylibre.com

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20170309104154.28295-10-jbrunet@baylibre.com

Now we have driver for the PRCM CCU, switch to use it instead of
old-style clock nodes for apb0-related clocks in sunxi-h3-h5.dtsi .

The mux 3 of R_CCU is still the internal oscillator, which is said to be
16MHz plus minus 30%, and get a measured value of 15MHz~16MHz on my two
H3 boards and one H5 board.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Allwinner A64 have a dedicated pin controller to manage the PL pin bank.
As the driver and the required clock support are added, add the device
node for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

A64 SoC have a CCU (r_ccu) in PRCM block.

Add the device node for it.

The mux 3 of R_CCU is an internal oscillator, which is 16MHz according
to the user manual, and has only 30% accuracy based on our experience
on older SoCs. The real mesaured value of it on two Pine64 boards is
around 11MHz, which is around 70% of 16MHz.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Merge tag 'v4.12-rockchip-dts64-symlinks-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Pull "Rockchip dts64 updates (using arm/arm64 symlinks) for 4.12 part1" from Heiko Stübner

Rockchip dts changes based on the newly created arm/arm64 symlinks.
The core addition is the support for the rk3399-based Gru family of
ChromeOS devices, like the Kevin board which is the recently released
Samsung Chromebook Plus. Additionally the usb3 controllers are added
to rk3399 as they're used on Gru devices and even without full type-c
support they can at least drive usb2 devices already.

* tag 'v4.12-rockchip-dts64-symlinks-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: add regulator info for Kevin digitizer
  arm64: dts: rockchip: describe Gru/Kevin OPPs + CPU regulators
  arm64: dts: rockchip: add Gru/Kevin DTS
  dt-bindings: Document rk3399 Gru/Kevin
  arm64: dts: rockchip: support dwc3 USB for rk3399

Merge tag 'v4.12-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Pull "Rockchip dts64 updates for 4.12 part1" from Heiko Stübner:

Contains various changes for the rk3368 (dma, i2s, disable mailbox per
default, mmc-resets) and also removes the wrongly added idle states, that
do not match the hardware's capabilities, as well as some general rk3399
pcie fixes as well as also the mmc resets.

* tag 'v4.12-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: fix PCIe domain number for rk3399
  arm64: dts: rockchip: add rk3399 dw-mmc resets
  arm64: dts: rockchip: add rk3368 dw-mmc resets
  arm64: dts: rockchip: disable mailbox of RK3368 SoCs per default
  arm64: dts: rockchip: add i2s nodes support for RK3368 SoCs
  arm64: dts: rockchip: add dmac nodes for rk3368 SoCs
  arm64: dts: rockchip: remove wrongly added idle states on rk3368
  arm64: dts: rockchip: sort rk3399-pcie by unit address

Pull "Broadcom devicetree-arm64 changes for 4.12" from Florian Fainelli:

This pull request contains Broadcom ARM64-based SoCs Device Tree updates for
4.12, please pull the following:

- Rob enables the cryptographic block on Northstar 2 (SPU) by adding the proper
  Device Tree nodes

- Jon replaces all occurences of: status = "ok" with status = "okay" to better
  conform to the Device Tree specification

* tag 'arm-soc/for-4.12/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: NS2: convert "ok" to "okay"
  arm64: dts: NS2: Add Broadcom SPU driver DT entry

Pull "mvebu dt64 for 4.12 (part 1)" from Gregory CLEMENT:

- Add RTC support on Armada 7k/8k
- Improve i2c support on Armada 37xx
- Add gpio expander and RTC on Armada 3720 board
- Improve USB3 support on Armada 37xx
- Add network support on Armada 7k/8k

* tag 'mvebu-dt64-4.12-1' of git://git.infradead.org/linux-mvebu:
  arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K
  ARM64: dts: marvell: armada-3720 add RTC support
  ARM64: dts: marvell: armada-3720-db: Add phy for USB3
  ARM64: dts: marvell: armada-37xx: Add clock resource for USB3
  ARM64: dts: marvell: armada-37xx: Fix interrupt mapping for USB3
  ARM64: dts: marvell: armada-3720-db: add gpio expander
  ARM64: dts: marvell: armada37xx: add address and size property for i2c cells
  arm64: dts: marvell: add RTC description for Armada 7K/8K

Merge tag 'uniphier-dt64-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

Pull "UniPhier ARM64 SoC DT updates for v4.12" from Masahiro Yamada:

- Fix W=* build warnings
- Add pinctrl properties to eMMC nodes
- Fix resets properties of USB nodes

* tag 'uniphier-dt64-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: re-order reset deassertion of USB of LD11
  arm64: dts: uniphier: add pinctrl property to eMMC node for LD11/LD20
  arm64: dts: uniphier: move memory node below aliases node
  arm64: dts: uniphier: fix no unit name warnings

Move and update device tree files as part of transition from Broadcom
Vulcan to Cavium ThunderX2.

The changes are to:
 * rename dts/broadcom/vulcan.dtsi to cavium/thunder2-99xx.dtsi,
   update cpu cores to be "cavium,thunder2", and update SoC to be
   "cavium,thunderx2-cn9900"
 * move SoC dts/broadcom/vulcan-eval.dtsi to cavium/thunder2-99xx.dtsi
   and update board name string
 * Update dts/broadcom/Makefile not to build vulcan dtbs
 * Update dts/cavium/Makefile to build thunder2 dtbs

No changes to the dts contents except the updated "compatible" and
"model" properties.
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add documentation for Cavium's ThunderX2 CN99XX ARM64 processor. This
SoC will use "cavium,thunderx2-cn9900" as the compatible property.

Also add a documentation entry for the "cavium,thunder2" cpu core
present in these SoCs.
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add EE and AO domains pins for the spdif output to the gxl device tree.
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add EE and AO domains pins for the i2s output clocks and data the gxl
device tree
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add EE and AO domains pins for the spdif output to the gxbb device tree.
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add EE and AO domains pins for the i2s output clocks and data to the gxbb
device tree.
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

The ODroid-C2 on-board USB Hub needs to to have it's reset signal set to
high level in order to be enumerated by the USB Host Controller.

But this management must be part of the currently in-development Generic
Power Sequence patch that will allow a USB Controller driver to start and stop
a power sequence associated to the USB Bus.

In the meantime, a simple USB Hog will work to enable the USB Hub.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

The same Mali-450 MP3 GPU is present in the GXBB and GXL SoCs.

The node is simply added in the meson-gxbb.dtsi file.

For GXL, since a lot is shared with the GXM that has a Mali-T820 IP, this
patch adds a new meson-gxl-mali.dtsi and is included in the SoC specific
dtsi files.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: s/MALI/Mali in changelog]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Orange Pi PC 2 board features a OTG port like the one on older H3 Orange
Pi's, with PG12 pin being the id det pin and PL2 being the vbus driver
pin.

Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Orange Pi PC 2 is a typical single board computer using the
Allwinner H5 SoC. Apart from the usual suspects it features three
separately driven USB ports and a Gigabit Ethernet port.
Also it has a SPI NOR flash soldered, from which the board can boot
from. This enables the SBC to behave like a "real computer" with
built-in firmware.

Add the board specific .dts file, which includes the H5 .dtsi and
enables the peripherals that we support so far.
Reviewed-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[Icenowy: dropped all GPIO pinctrl nodes, change red LED gpio,
 change MMC cd to active-low, rename some node names to prevent
 underscores]
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Allwinner H5 SoC is pin-compatible to the H3 SoC, but uses
Cortex-A53 cores instead.
Based on the now shared base .dtsi describing the common peripherals
describe the H5 specific nodes on top of that.
That symlinks in the sunxi-h3-h5.dtsi from the arch/arm tree.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[Icenowy: add H5 pinctrl compatible, and changes for my h3-h5 dtsi
 refactor, commit message changed to meet new arm64 naming scheme,
 drop H3 pinctrl compatible because of interrupt bank change, drop
 H3 ccu compatible because of clock change, drop ccu node as it come
 into h3-h5 dtsi]
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Allwinner H3/H5 have a dual-routed USB PHY0 -- routed to either OHCI/EHCI
or MUSB controller.

Add device nodes for these controllers.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The new Allwinner H5 SoC is pin-compatible to the H3 SoC, but with the
Cortex-A7 cores replaced by Cortex-A53 cores and the MMC controller
updated. So we should really share almost the whole .dtsi.
In preparation for that move the peripheral parts of the existing
sun8i-h3.dtsi into a new sunxi-h3-h5.dtsi.
The actual sun8i-h3.dtsi then includes that and defines the H3 specific
parts on top of it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[Icenowy: also split out mmc and gic, as well as pio and ccu's
 compatible, and make drop of skeleton into a seperated patch]
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

According to the datasheets provided by Allwinner, both Allwinner H3 and
H5 use GIC-400 as their interrupt controller.

For better device tree reusing, correct the GIC compatible in H3 DTSI to
"arm,gic-400", thus this node can be reused in H5.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

After converting to generic pinconf binding, pinctrl-a10.h is now not
used at all.

Drop its inclusion for H3 DTSI.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The skeleton.dtsi file is now deprecated, and do not exist in ARM64
environment.

Since we will soon reuse most part of H3 DTSI for H5, which is an ARM64
chip, drop skeleton.dtsi inclusion now.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add pinctrl pins nodes following the additions of missing pins in the pinctrl
driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>