- 10 Jun, 2019 2 commits
-
-
Robert Hancock authored
sfp_check_state can potentially be called by both a threaded IRQ handler and delayed work. If it is concurrently called, it could result in incorrect state management. Add a st_mutex to protect the state - this lock gets taken outside of code that checks and handle state changes, and the existing sm_mutex nests inside of it. Suggested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Robert Hancock <hancock@sedsystems.ca> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Hancock authored
SFP device polling can cause problems during the shutdown process if the parent devices of the network controller have been shut down already. This problem was seen on the iMX6 platform with PCIe devices, where accessing the device after the bus is shut down causes a hang. Free any acquired GPIO interrupts and stop all delayed work in the SFP driver during the shutdown process, so that we ensure that no pending operations are still occurring after the SFP shutdown completes. Signed-off-by:
-
- 09 Jun, 2019 29 commits
-
-
Dan Carpenter authored
The nhg->nh_entries[] array is allocated in nexthop_grp_alloc() and it has nhg->num_nh elements so this check should be >= instead of >. Fixes: 430a0491 ("nexthop: Add support for nexthop groups") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David S. Miller authored
Jarod Wilson says: ==================== bonding: clean up and standarize logging printks This set improves a few somewhat terse bonding debug messages, fixes some errors in others, and then standarizes the majority of them, using new slave_* printk macros that wrap around netdev_* to ensure both master and slave information is provided consistently, where relevant. This set proves very useful in debugging issues on hosts with multiple bonds. I've run an array of LNST tests over this set, creating and destroying quite a few different bonds of the course of testing, fixed the little gotchas here and there, and everything looks stable and reasonable to me, but I can't guarantee I've tested every possible message and scenario to catch every possible "slave could be NULL" case. ==================== Signed-off-by: -
Jarod Wilson authored
All of these printk instances benefit from having both master and slave device information included, so convert to using a standardized macro format and remove redundant information. Suggested-by:
Joe Perches <joe@perches.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
All of these printk instances benefit from having both master and slave device information included, so convert to using a standardized macro format and remove redundant information. Suggested-by:
-
Jarod Wilson authored
All of these printk instances benefit from having both master and slave device information included, so convert to using a standardized macro format and remove redundant information. Suggested-by:
-
Jarod Wilson authored
All of these printk instances benefit from having both master and slave device information included, so convert to using a standardized macro format and remove redundant information. Suggested-by:
-
Jarod Wilson authored
Where possible, we generally want both the bond master and the relevant slave information in message output. Standardize the format using new slave_* printk macros. Suggested-by:
-
Jarod Wilson authored
Passing the bond name again to debug output when referencing slave is wrong. We're trying to set the bond's MAC to that of the new_active slave, so adjust the error message slightly and pass in the slave's name, not the bond's. Then we're trying to set the MAC on the old active slave, but putting the new active slave's name in the output. While we're at it, clarify the error messages so you know which one actually triggered. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by:
-
Jarod Wilson authored
Seeing bonding debug log data along the lines of "event: 5" is a bit spartan, and often requires a lookup table if you don't remember what every event is. Make use of netdev_cmd_to_name for an improved debugging experience, so for the prior example, you'll see: "bond_netdev_event received NETDEV_REGISTER" instead (both are prefixed with the device for which the event pertains). CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by:
-
Fabio Estevam authored
dev_err() is more appropriate for printing error messages inside drivers, so switch to dev_err(). Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Nirranjan Kirubaharan authored
Spread initial IRQ affinity hints across the device node CPUs, for nic queue and uld queue IRQs, to load balance and avoid all interrupts on CPU0. Signed-off-by:
Nirranjan Kirubaharan <nirranjan@chelsio.com> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: some code optimizations & cleanups & bugfixes This patch-set includes code optimizations, cleanups and bugfixes for the HNS3 ethernet controller driver. [patch 1/12] logs more detail error info for ROCE RAS errors. [patch 2/12] fixes a wrong size issue for mailbox responding. [patch 3/12] makes HW GRO handing compliant with SW one. [patch 4/12] refactors hns3_get_new_int_gl. [patch 5/12] adds handling for VF's over_8bd_nfe_err. [patch 6/12 - 12/12] adds some code optimizations and cleanups, to make the code more readable and compliant with some static code analysis tools, these modifications do not change the logic of the code. Change log: V1->V2: fixes comment from David Miller. ==================== Signed-off-by: -
Weihang Li authored
This patch fixes some coding style issues reported by some static code analysis tools and code review, such as modify some comments, rename some variables, log some errors in detail, and fixes some alignment errors. BTW, these cleanups do not change the logic of code. Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
HuiSong Li <lihuisong@huawei.com> Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yufeng Mo authored
This patch deletes some redundant code and refactors some bloated functions. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
In order to make it more readable, this patch modifies PF/VF's RSS hash key configuring function. Signed-off-by:
-
Yufeng Mo authored
This patch adds some macros instead of magic numbers in serval places Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Jian Shen authored
In order to improve readability, this patch uses macros to replace some magic numbers, and adds some comments for some others. Signed-off-by:
-
Yonglong Liu authored
Since HNAE3_CLIENT_UNIC and HNAE3_DEV_UNIC is not used any more, this patch removes the redundant codes. Signed-off-by:
-
Weihang Li authored
We trigger PF reset when a RAS error of NIC named over_8bd_nfe_err occurred before. But it is possible that a VF causes that error, it's reasonable to trigger VF reset instead of PF reset in this case. This patch add detection of vf_id if a over_8bd_nfe_err occurs, if vf_id is 0, we trigger PF reset. Otherwise, we will trigger VF reset on the VF with error. Signed-off-by:
-
Yunsheng Lin authored
This patch adds a new hns3_get_new_flow_lvl function to calculate the packet flow level, which is used to decide the interrupt coalescence parameter, in order to make the flow level calculation code more readable and make the future calculation ajdustment easier. Signed-off-by:
-
Yunsheng Lin authored
This patch replaces numa_node_id with numa_mem_id when doing buffer reusing checking, because the buffer still can be reused when the buffer is from the nearest node and the local node has no memory attached. Signed-off-by:
-
Yunsheng Lin authored
Currently when a GRO packet is assembled by HW, the checksum is modified to reflect the entire packet by HW and skb->ip_summed is set to CHECKSUM_UNNECESSARY, which is not compliant with SW GRO. This patch sets up skb's network and transport header, sets the GRO packet's checksum according to pseudo header and set the skb->ip_summed to CHECKSUM_PARTIAL. This patch also use gso_size to distinguish GRO packet from normal packet, use eth_type_vlan to check the VLAN type and set the SKB_GSO_TCP_FIXEDID according to BD info during HW GRO info processing. Signed-off-by:
-
Zhongzhu Liu authored
According to user manual, the maximum size of mailbox responding data is 8 bytes, the macro HCLGE_MBX_MAX_RESP_DATA_SIZE should be defined as 8 instead of 16. Fixes: 9194d18b ("net: hns3: fix the problem that the supported port is empty") Signed-off-by:
Zhongzhu Liu <liuzhongzhu@huawei.com> Signed-off-by:
-
Xiaofei Tan authored
This patch logs detail error info of ROCEE ECC and AXI errors for debug purpose, and remove unnecessary reset for ROCEE overflow errors. Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
-
David S. Miller authored
Grygorii Strashko says: ==================== net: ethernet: ti: netcp: update and enable cpts support The Keystone 2 66AK2HK/E/L 1G Ethernet Switch Subsystems contains The Common Platform Time Sync (CPTS) module which is in general compatible with CPTS module found on TI AM3/4/5 SoCs. So, the basic support for Keystone 2 CPTS is available by default, but not documented and has never been enabled inconfig files. The Keystone 2 CPTS module supports also some additional features like time sync reference (RFTCLK) clock selection through CPTS_RFTCLK_SEL register (offset: x08) in CPTS module, which can modelled as multiplexer clock (this was discussed some time ago [1]). This series adds missed binding documentation for Keystone 2 66AK2HK/E/L CPTS module and enables CPTS for TI Keystone 2 66AK2HK/E/L SoCs with possiblity to select CPTS reference clock. Patch 1: adds the CPTS binding documentation. CPTS bindings are defined in the way that allows CPTS properties to be grouped under "cpts" sub-node. It also defines "cpts-refclk-mux" clock for CPTS RFTCLK selection. Patches 2-3: implement CPTS properties grouping under "cpts" sub-node with backward compatibility support. Patch 4: adds support for time sync reference (RFTCLK) clock selection from DT by adding support for "cpts-refclk-mux" multiplexer clock. Patches 5-9: DT CPTS nodes update for TI Keystone 2 66AK2HK/E/L SoCs. Patch 10: enables CPTS for TI Keystone 2 66AK2HK/E/L SoCs. I grouped all patches in one series for better illustration of the changes, but in general Pateches 1-4 are netdev matarieal (first) and other patches are platform specific. Series can be found at: git@git.ti.com:~gragst/ti-linux-kernel/gragsts-ti-linux-kernel.git branch: net-next-k2e-cpts-refclk Changes in v2: - do reverse christmas tree in cpts_of_mux_clk_setup() - add ack from Richard Cochran v1: https://lkml.org/lkml/2019/6/1/77 [1] https://www.spinics.net/lists/netdev/msg408931.html ==================== Signed-off-by:
-
Grygorii Strashko authored
Some CPTS instances, which can be found on KeyStone 2 1G Ethernet Switch Subsystems, can control an external multiplexer that selects one of up to 32 clocks as time sync reference (RFTCLK) clock. This feature can be configured through CPTS_RFTCLK_SEL register (offset: x08) in CPTS module and can be represented as multiplexer clock. Hence, introduce support for optional cpts-refclk-mux clock, which, once defined will allow to select required CPTS RFTCLK by using assigned-clock-parents DT property in board files. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Grygorii Strashko authored
Allow to place CPTS properties in the child "cpts" DT node. For backward compatibility - roll-back and read CPTS DT properties from parent node if "cpts" node is not present. Signed-off-by:
-
Grygorii Strashko authored
Use devm_get_clk_from_child() instead of devm_clk_get() and this way allow to group CPTS DT properties in sub-node for better code readability and maintenance. Roll-back to devm_clk_get() if devm_get_clk_from_child() fails for backward compatibility. Signed-off-by:
-
Grygorii Strashko authored
The Keystone 2 66AK2HK/E/L 1G Ethernet Switch Subsystems contains The Common Platform Time Sync (CPTS) module which is in general compatible with CPTS module found on "legacy" TI AM3/4/5 SoCs. So, the basic support for Keystone 2 CPTS is available by default, but not documented. The Keystone 2 CPTS module supports also some additional features like time sync reference (RFTCLK) clock selection through CPTS_RFTCLK_SEL register (offset: x08) in CPTS module, which is modelled as multiplexer clock. This patch adds missed binding documentation for Keystone 2 66AK2HK/E/L CPTS module. Signed-off-by:
-
- 08 Jun, 2019 9 commits
-
-
David S. Miller authored
Vladimir Oltean says: ==================== PTP support for the SJA1105 DSA driver This patchset adds the following: - A timecounter/cyclecounter based PHC for the free-running timestamping clock of this switch. - A state machine implemented in the DSA tagger for SJA1105, which keeps track of metadata follow-up Ethernet frames (the switch's way of transmitting RX timestamps). Clock manipulations on the actual hardware PTP clock will have to be implemented anyway, for the TTEthernet block and the time-based ingress policer. v3 patchset can be found at: https://lkml.org/lkml/2019/6/4/954 Changes from v3: - Made it compile with the SJA1105 DSA driver and PTP driver as modules. - Reworked/simplified/fixed some issues in 03/17 (dsa_8021q_remove_header) and added an ASCII image that illustrates the transformation that is taking place. - Removed a useless check for sja1105_is_link_local from 16/17 (RX timestamping) which also made previous 08/17 patch ("Move sja1105_is_link_local to include/linux") useless and therefore dropped. v2 patchset can be found at: https://lkml.org/lkml/2019/6/2/146 Changes from v2: - Broke previous 09/10 patch (timestamping) into multiple smaller patches. - Every patch in the series compiles. v1 patchset can be found at: https://lkml.org/lkml/2019/5/28/1093 Changes from v1: - Removed the addition of the DSA .can_timestamp callback. - Waiting for meta frames is done completely inside the tagger, and all frames emitted on RX are already partially timestamped. - Added a global data structure for the tagger common to all ports. - Made PTP work with ports in standalone mode, by limiting use of the DMAC-mangling "incl_srcpt" mode only when ports are bridged, aka when the DSA master is already promiscuous and can receive anything. Also changed meta frames to be sent at the 01-80-C2-00-00-0E DMAC. - Made some progress w.r.t. observed negative path delay. Apparently it only appears when the delay mechanism is the delay request-response (end-to-end) one. If peer delay is used (-P), the path delay is positive and appears reasonable for an 1000Base-T link (485 ns in steady state). SJA1105 as PTP slave (OC) with E2E path delay: ptp4l[55.600]: master offset 8 s2 freq +83677 path delay -2390 ptp4l[56.600]: master offset 17 s2 freq +83688 path delay -2391 ptp4l[57.601]: master offset 6 s2 freq +83682 path delay -2391 ptp4l[58.601]: master offset -1 s2 freq +83677 path delay -2391 SJA1105 as PTP slave (OC) with P2P path delay: ptp4l[48.343]: master offset 5 s2 freq +83715 path delay 484 ptp4l[48.468]: master offset -3 s2 freq +83705 path delay 485 ptp4l[48.593]: master offset 0 s2 freq +83708 path delay 485 ptp4l[48.718]: master offset 1 s2 freq +83710 path delay 485 ptp4l[48.844]: master offset 1 s2 freq +83710 path delay 485 ptp4l[48.969]: master offset -5 s2 freq +83702 path delay 485 ptp4l[49.094]: master offset 3 s2 freq +83712 path delay 485 ptp4l[49.219]: master offset 4 s2 freq +83714 path delay 485 ptp4l[49.344]: master offset -5 s2 freq +83702 path delay 485 ptp4l[49.469]: master offset 3 s2 freq +83713 path delay 487 ==================== Signed-off-by:
-
Vladimir Oltean authored
This enables the PTP support towards userspace applications such as linuxptp. The switches can timestamp only trapped multicast MAC frames, and therefore only the profiles of 1588 over L2 are supported. TX timestamping can be enabled per port, but RX timestamping is enabled globally. As long as RX timestamping is enabled, the switch will emit metadata follow-up frames that will be processed by the tagger. It may be a problem that linuxptp does not restore the RX timestamping settings when exiting. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Meta frame reception relies on the hardware keeping its promise that it will send no other traffic towards the CPU port between a link-local frame and a meta frame. Otherwise there is no other way to associate the meta frame with the link-local frame it's holding a timestamp of. The receive function is made stateful, and buffers a timestampable frame until its meta frame arrives, then merges the two, drops the meta and releases the link-local frame up the stack. Signed-off-by:
-
Vladimir Oltean authored
Without noticing any particular issue, this patch ensures that management traffic is treated with the maximum priority on RX by the switch. This is generally desirable, as the driver keeps a state machine that waits for metadata follow-up frames as soon as a management frame is received. Increasing the priority helps expedite the reception (and further reconstruction) of the RX timestamp to the driver after the MAC has generated it. Signed-off-by:
-
Vladimir Oltean authored
This will be used to keep state for RX timestamping. It is global because the switch serializes timestampable and meta frames when trapping them towards the CPU port (lower port indices have higher priority) and therefore having one state machine per port would create unnecessary complications. Signed-off-by:
-
Vladimir Oltean authored
This adds support in the tagger for understanding the source port and switch id of meta frames. Their timestamp is also extracted but not used yet - this needs to be done in a state machine that modifies the previously received timestampable frame - will be added in a follow-up patch. Also take the opportunity to: - Remove a comment in sja1105_filter made obsolete by e8d67fa5 ("net: dsa: sja1105: Don't store frame type in skb->cb") - Reorder the checks in sja1105_filter to optimize for the most likely scenario first: regular traffic. Signed-off-by:
-
Vladimir Oltean authored
Although meta frames are configured to be sent at SJA1105_META_DMAC (01-80-C2-00-00-0E) which is a multicast MAC address that would also be trapped by the switch to the CPU, were it to receive it on a front-panel port, meta frames are conceptually not link-local frames, they only carry their RX timestamps. The choice of sending meta frames at a multicast DMAC is a pragmatic one, to avoid installing an extra entry to the DSA master port's multicast MAC filter. Signed-off-by:
-
Vladimir Oltean authored
This table is used to program the switch to emit "meta" follow-up Ethernet frames (which contain partial RX timestamps) after each link-local frame that was trapped to the CPU port through MAC filtering. This includes PTP frames. Signed-off-by:
-
Vladimir Oltean authored
Meta frames are sent on the CPU port by the switch if RX timestamping is enabled. They contain a partial timestamp of the previous frame. They are Ethernet frames with the Ethernet header constructed out of: - SJA1105_META_DMAC - SJA1105_META_SMAC - ETH_P_SJA1105_META The Ethernet payload will be decoded in a follow-up patch. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
