- 17 Mar, 2007 30 commits
-
-
Ingo Molnar authored
Testing of -rt by IBM uncovered a locking bug in wake_futex_pi(): the PI state needs to be locked before we access it. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Marcel Selhorst authored
Signed-off-by:
Marcel Selhorst <tpm@selhorst.net> Signed-off-by:
-
Bernhard Walle authored
Initialise the SAK member of the vc_cons variable on all virtual terminals, not only the first one. This prevents an oops when trying Sysrq-C on e.g. the second virtual terminal: kernel BUG at kernel/workqueue.c:212! invalid opcode: 0000 [1] SMP CPU 0 Modules linked in: i915 drm deflate zlib_deflate twofish twofish_common serpent blowfish des ce Pid: 0, comm: swapper Not tainted 2.6.21-rc3-default #15 RIP: 0010:[<ffffffff8028c955>] [<ffffffff8028c955>] queue_work+0x32/0x51 RSP: 0018:ffffffff805fada8 EFLAGS: 00010013 RAX: ffffffff80683f38 RBX: ffffffff804ae700 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff80683f30 RDI: ffff81000134a840 RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000002 R10: ffffffff805990e0 R11: ffff810037f4c0f0 R12: 000000000000006b R13: ffff81007aa23000 R14: 0000000000000001 R15: 0000000000000096 FS: 0000000000000000(0000) GS:ffffffff804d8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00002b72026e9000 CR3: 0000000079175000 CR4: 00000000000006e0 Process swapper (pid: 0, threadinfo ffffffff8059e000, task ffffffff80490840) Stack: 0000000000000096 ffffffff803635db ffffffff805fadf8 0000000000000001 ffff8100013c2e40 0000000000000025 ffff81007c931c00 ffff81007aa23000 0000000000000001 ffffffff8035e3ee 0000000000000092 ffff810037cc8000 Call Trace: <IRQ> [<ffffffff803635db>] __handle_sysrq+0x98/0x129 [<ffffffff8035e3ee>] kbd_event+0x32e/0x56a [<ffffffff8037d502>] input_event+0x422/0x44a [<ffffffff80381d71>] atkbd_interrupt+0x449/0x503 [<ffffffff8037a42d>] serio_interrupt+0x37/0x6f [<ffffffff8037affb>] i8042_interrupt+0x1f4/0x20a [<ffffffff8026bd20>] smp_send_timer_broadcast_ipi+0x2d/0x4e [<ffffffff8020eee5>] handle_IRQ_event+0x25/0x53 [<ffffffff802a924c>] handle_edge_irq+0xe4/0x128 [<ffffffff802562ac>] call_softirq+0x1c/0x28 [<ffffffff802632eb>] do_IRQ+0x6c/0xd3 [<ffffffff8024f4e7>] mwait_idle+0x0/0x45 [<ffffffff80255631>] ret_from_intr+0x0/0xa <EOI> [<ffffffff80248a4d>] datagram_poll+0x0/0xc8 [<ffffffff8024f529>] mwait_idle+0x42/0x45 [<ffffffff80242c05>] cpu_idle+0x8b/0xae [<ffffffff805a8779>] start_kernel+0x2b9/0x2c5 [<ffffffff805a815e>] _sinittext+0x15e/0x162 Code: 0f 0b eb fe 48 8b 07 48 63 d2 48 f7 d0 48 8b 3c d0 e8 13 ff RIP [<ffffffff8028c955>] queue_work+0x32/0x51 RSP <ffffffff805fada8> Kernel panic - not syncing: Aiee, killing interrupt handler! Signed-off-by:
Bernhard Walle <bwalle@suse.de> Acked-by:
Eric Biederman <ebiederm@xmission.com> Cc: <stable@kernel.org> Signed-off-by:
-
Stefano Brivio authored
We need vid_which_vrm and vid_from_reg in the w83793 module. Signed-off-by:
Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Trond Myklebust authored
Looks like we need a check in nfs_getattr() for a regular file. It makes no sense to call nfs_sync_mapping_range() on anything else. I think that should fix your problem: it will stop the NFS client from interfering with dirty pages on that inode's mapping. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by:
Olof Johansson <olof@lixom.net> Cc: <stable@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
The current NFS client congestion logic is severly broken, it marks the backing device congested during each nfs_writepages() call but doesn't mirror this in nfs_writepage() which makes for deadlocks. Also it implements its own waitqueue. Replace this by a more regular congestion implementation that puts a cap on the number of active writeback pages and uses the bdi congestion waitqueue. Also always use an interruptible wait since it makes sense to be able to SIGKILL the process even for mounts without 'intr'. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
suzuki authored
The only error code which comes from the partition checkers is -1, when they finds an EIO. As per the discussion, ENOMEM values were ignored, as they might scare the users. So, with the current code, we end up returning -1 and not EIO for the ioctl() calls. Which doesn't give any clue to the user of what went wrong. Signed-off-by:
Suzuki K P <suzuki@in.ibm.com> Signed-off-by:
-
Andrew Johnson authored
When the console is in VT_AUTO+KD_GRAPHICS mode, switching to the SUSPEND_CONSOLE fails, resulting in vt_waitactive() waiting indefinitely or until the task is interrupted. This patch tests if a console switch can occur in set_console() and returns early if a console switch is not possible. [akpm@linux-foundation.org: cleanup] Signed-off-by:
Andrew Johnson <ajohnson@intrinsyc.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Vasily Averin authored
smbfs allocates rq_trans2buffer to handle server's multi transaction2 response messages. As struct smb_request may be reused, rq_trans2buffer is freed before each new request. However if last servers's response is not multi but single trans2 message then new rq_trans2buffer is not allocated but last smb_rput still tries to free it again. To prevent this issue rq_trans2buffer pointer should be set to NULL after kfree. Signed-off-by:
Vasily Averin <vvs@sw.ru> Signed-off-by:
-
Geert Uytterhoeven authored
Frame buffer device drivers that cannot be built as modules must depend on `FB = y'. Correct the 3 remaining offenders. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Michael Halcrow authored
ecryptfs_d_release() first dereferences a pointer (via ecryptfs_dentry_to_lower()) and then afterwards checks to see if the pointer it just dereferenced is NULL (via ecryptfs_dentry_to_private()). This patch moves all of the work done on the dereferenced pointer inside a block governed by the condition that the pointer is non-NULL. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Thomas Gleixner authored
commit f4304ab2 (HZ free NTP) moved the access to wall_to_monotonic in hrtimer_get_softirq_time() out of the xtime_lock protection. Move it back into the seq_lock section. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Atsushi Nemoto authored
Prevents a potential oops with CONFIG_SPI_DEBUG given flakey hardware or incorrect configuration. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Thomas Gleixner authored
hrtimer_forward() does not check for the possible overflow of timer->expires. This can happen on 64 bit machines with large interval values and results currently in an endless loop in the softirq because the expiry value becomes negative and therefor the timer is expired all the time. Check for this condition and set the expiry value to the max. expiry time in the future. The fix should be applied to stable kernel series as well. Signed-off-by:
-
Antonino A. Daplas authored
SavagePrintRegs() requires struct savagefb_par. Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Antonino A. Daplas authored
This is a hack that seems to kick start the 2D engine of the Savage IX in some Toshiba laptops. Without this, the laptop starts with a black screen and occasionally crashes X. Signed-off-by:
-
Ondrej Zajicek authored
Pixclock setting in sstfb didn't work with my Voodoo 2 card with ICS 5342 DAC (this DAC requires two consecutive writes to one of its registers to program pixclock - maybe first write merged with second). Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by:
-
David Brownell authored
It's been pointed out that output GPIOs should have an initial value, to avoid signal glitching ... among other things, it can be some time before a driver is ready. This patch corrects that oversight, fixing - documentation - platforms supporting the GPIO interface - users of that call (just one for now, others are pending) There's only one user of this call for now since most platforms are still using non-generic GPIO setup code, which in most cases already couples the initial value with its "set output mode" request. Note that most platforms are clear about the hardware letting the output value be set before the pin direction is changed, but the s3c241x docs are vague on that topic ... so those chips might not avoid the glitches. Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Acked-by:
Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Chris Lesiak authored
Fix a bug in the cleanup of an spi_bitbang bus. The workqueue associated with the bus was destroyed before the call to spi_unregister_master. That meant that spi devices on that bus would be unable to do IO in their remove method. The shutdown flag should have been able to prevent a segfault, but was never getting set. By waiting to destroy the workqueue until after the master is unregistered, devices are able to do IO in their remove methods. An added benefit is that neither the shutdown flag nor a wait for the queue of messages to empty is needed. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Signed-off-by:
-
Zach Brown authored
This patch fixes a user-triggerable oops that was reported by Leonid Ananiev as archived at http://lkml.org/lkml/2007/2/8/337. dio writes invalidate clean pages that intersect the written region so that subsequent buffered reads go to disk to read the new data. If this fails the interface tries to tell the caller that the cache is inconsistent by returning EIO. Before this patch we had the problem where this invalidation failure would clobber -EIOCBQUEUED as it made its way from fs/direct-io.c to fs/aio.c. Both fs/aio.c and bio completion call aio_complete() and we reference freed memory, usually oopsing. This patch addresses this problem by invalidating before the write so that we can cleanly return -EIO before ->direct_IO() has had a chance to return -EIOCBQUEUED. There is a compromise here. During the dio write we can fault in mmap()ed pages which intersect the written range with get_user_pages() if the user provided them for the source buffer. This is a crazy thing to do, but we can make it mostly work in most cases by trying the invalidation again. The compromise is that we won't return an error if this second invalidation fails if it's an AIO write and we have -EIOCBQUEUED. This was tested by having two processes race performing large O_DIRECT and buffered ordered writes. Within minutes ext3 would see a race between ext3_releasepage() and jbd holding a reference on ordered data buffers and would cause invalidation to fail, panicing the box. The test can be found in the 'aio_dio_bugs' test group in test.kernel.org/autotest. After this patch the test passes. Signed-off-by:
Zach Brown <zach.brown@oracle.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Cc: Leonid Ananiev <leonid.i.ananiev@linux.intel.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Nick Piggin authored
madvise(MADV_REMOVE) can go into an infinite loop or cause an oops if the call covers a region from the start of a vma, and extending past that vma. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Badari Pulavarty <pbadari@us.ibm.com> Acked-by:
Hugh Dickins <hugh@veritas.com> Cc: <stable@kernel.org> Signed-off-by:
-
Evgeniy Dushistov authored
During modification of code to support UFS2 writing, the case with "three indirect" blocks in truncate path was missed, this patch fixes this situation. Signed-off-by:
Evgeniy Dushistov <dushistov@mail.ru> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Evgeniy Dushistov authored
This patch fix behaviour in such test scenario: lseek(fd, BIG_OFFSET) write(fd, buf, sizeof(buf)) truncate(BIG_OFFSET) truncate(BIG_OFFSET + sizeof(buf)) read(fd, buf...) Because of if file big enough(BIG_OFFSET) we start allocate space by block, ordinary block size > page size, so we should zeroize the rest of block in truncate(except last framgnet, about which VFS should care), to not get garbage, when we extend file. Also patch corrects conversion from pointer to block to physical block number, this helps in case of not common used UFS types. And add to debug output inode number. Signed-off-by:
-
Evgeniy Dushistov authored
This fixes "change blocks numbers on the fly" in case when "prepare write page" is in the call chain, in this case some buffers may be not uptodate and not mapped, we should care to map them and load from disk. This patch was tested with: - ufs regressions simple tests - fsx-linux - ltp(20060306) - untar and build kernel Signed-off-by:
-
Evgeniy Dushistov authored
This patch corrects work with time in UFS2 case. 1) According to UFS2 disk layout modification/access and so on "time" should be hold in two variables one 64bit for seconds and another 32bit for nanoseconds, at now for some unknown reason we suppose that "inode time" holds in three variables 32bit for seconds, 32bit for milliseconds and 32bit for nanoseconds. 2) We set amount of nanoseconds in "VFS inode" to 0 during read, instead of getting values from "on disk inode"(this should close http://bugzilla.kernel.org/show_bug.cgi?id=7991). Signed-off-by:
-
Rafael J. Wysocki authored
Prevent the WARN_ON() in arch/x86_64/kernel/acpi/sleep.c:init_low_mapping() from triggering by disabling nonboot CPUs before we finally enter the platform suspend. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
-
Rafael J. Wysocki authored
If swsusp is using the platform mode during the resume and the image cannot be read, the platform mode should be switched off before software_resume() returns. Make it happen. Signed-off-by:
-
David Brownell authored
This removes several pointless exports from drivers/dma/dmaengine.c; the dma_async_memcpy_*() functions are inlined by <linux/dmaengine.h> so those exports are inappropriate. It also moves the existing EXPORT_SYMBOL declarations next to their functions, so it's now trivial to confirm one-to-one correspondence between exports and nonstatic symbols. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Chris Leech <christopher.leech@intel.com> Signed-off-by:
-
Andy Isaacson authored
When iterating through an array, one must be careful to test one's index variable rather than another similarly-named variable. The loop will read off the end of conf->disks[] in the following (pathological) case: % dd bs=1 seek=840716287 if=/dev/zero of=d1 count=1 % for i in 2 3 4; do dd if=/dev/zero of=d$i bs=1k count=$(($i+150)); done % ./vmlinux ubd0=root ubd1=d1 ubd2=d2 ubd3=d3 ubd4=d4 # mdadm -C /dev/md0 --level=linear --raid-devices=4 /dev/ubd[1234] adding some printks, I saw this: [42949374.960000] hash_spacing = 821120 [42949374.960000] cnt = 4 [42949374.960000] min_spacing = 801 [42949374.960000] j=0 size=820928 sz=820928 [42949374.960000] i=0 sz=820928 hash_spacing=820928 [42949374.960000] j=1 size=64 sz=64 [42949374.960000] j=2 size=64 sz=128 [42949374.960000] j=3 size=64 sz=192 [42949374.960000] j=4 size=1515870810 sz=1515871002 Cc: Gautham R Shenoy <ego@in.ibm.com> Acked-by:
Neil Brown <neilb@cse.unsw.edu.au> Cc: <stable@kernel.org> Signed-off-by:
-
David Brownell authored
Make some normal code paths in PNP stop issuing syslog spam. Since PNP issues calls regardless of device capablities, it's no surprise when some of those devices don't support those calls! Signed-off-by:
-
- 16 Mar, 2007 1 commit
-
-
Linus Torvalds authored
Signed-off-by:
-
- 15 Mar, 2007 9 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: natsemi: Avoid IntrStatus lossage if RX state machine resets. natsemi: Fix NAPI for interrupt sharing natsemi: Consistently use interrupt enable/disable functions NetXen: Fix softlockup seen during hardware access NetXen: Bug fix for Jumbo frames on XG card skge: set mac address bonding fix
-
Alan Stern authored
This patch (as869) reinstates the mutual exclusion between sysfs attribute method calls and attribute unregistration. The previously-reported deadlocks have been fixed, and this exclusion is by far the simplest way to avoid races during driver unbinding. The check for orphaned read-buffers has been moved down slightly, so that the remainder of a partially-read buffer will still be available to userspace even after the attribute has been unregistered. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Hugh Dickins <hugh@veritas.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Alan Stern authored
This patch (as868) adds a helper routine for device drivers that need to set up a callback to perform some action in a different process's context. This is intended for use by attribute methods that want to unregister themselves or their parent device. Attribute method calls are mutually exclusive with unregistration, so such actions cannot be taken directly. Two attribute methods are converted to use the new helper routine: one for SCSI device deletion and one for System/390 ccwgroup devices. Signed-off-by:
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: HID: zeroing of bytes in output fields is bogus HID: allocate hid_parser in a proper way
-
broonie@sirena.org.uk authored
This patch fixes the poll routine for the natsemi driver so that if the driver detects an RX state machine lockup then no interrupts will be lost while the driver recovers from that. Signed-Off-By:
Mark Brown <broonie@sirena.org.uk> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
broonie@sirena.org.uk authored
The interrupt status register for the natsemi chips is clear on read and was read unconditionally from both the interrupt and from the NAPI poll routine, meaning that if the interrupt service routine was called (for example, due to a shared interrupt) while a NAPI poll was scheduled interrupts could be missed. This patch fixes that by ensuring that the interrupt status register is only read by the interrupt handler when interrupts are enabled from the chip. It also reverts a workaround for this problem from the netpoll hook and improves the trace for interrupt events. Thanks to Sergei Shtylyov <sshtylyov@ru.mvista.com> for spotting the issue, Mark Huth <mhuth@mvista.com> for a simpler method and Simon Blake <simon@citylink.co.nz> for testing resources. Signed-Off-By:
-
broonie@sirena.org.uk authored
The natsemi drivers include functions for enabling and disabling interrupts from the chip but these are not used in all code paths. This patch changes the code paths that touch the interrupt enable register to use the functions. In all cases this adds an extra PCI read to post the operation but since none of these are in fast paths this shouldn't be too much of a problem. Signed-Off-By:
-
Linsys Contractor Mithlesh Thukral authored
NetXen: This will fix a softlock seen on some machines. The reason was too much time was spent waiting for hardware access to go through. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: -
Linsys Contractor Mithlesh Thukral authored
NetXen: Set the MTU for the right port depending upon the port number for XG cards. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by:
-
