This is a prerequisite for the GPU scheduler to make the order
of submission independent from the order of execution.

v2: properly implement the locking
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

This also requires some error handling from the callers of that function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

The comment is misleading and incorrect, remove it.

Printing the id is completely meaningless and this practice
can cause a race conditions on command submission.

The flags and hangs fields are completely unused.

Give all fields a common indentation.

v2: remove fpriv reference and unused flags as well, fix debug message.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

v3: check whether ip_blocks is enable
v2: add break in the for loop.
Signed-off-by: Rex zhu <rezhu@amd.com>

Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This new interface can be used by IP components to retrieve the
firmware information from the core driver.

v2: fix one typo
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhou@amd.com>
Signed-off-by: Young Yang <Young.Yang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This implements the cgs interface for allocating
GPU memory.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This implements the interface for atombios command
and data table access.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This implements the irq src registrar.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This implements the pciconfig register accessors.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This implements the MMIO register accessors.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

CGS (Common Graphics Services) is an AMD cross component
abstraction layer to designed to better encapsulate
specific IP block drivers so different teams can effectively
work on differnet IP block drivers independently. It provides
a common interface for things like accessing registers,
allocating GPU memory, and registering interrupt sources.
The plan is to eventually move more and more IP drivers to
this interface.  The first user is the ACP IP driver.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In function 'amdgpu_uvd_cs_pass2':
warning: 'min_ctx_size' may be used uninitialized in this function
  buf_sizes[0x4] = min_ctx_size;
                 ^
note: 'min_ctx_size' was declared here
  unsigned image_size, tmp, min_dpb_size, num_dpb_buffer, min_ctx_size;
                                                          ^
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

This allows you to send different audio to each audio capable
display.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A couple of fixes from the previous pull request as well as gl3 support.
There is one drm core change, an export of a previously private function.

Take 2 implementing screen targets, this time with the fbdev code adjusted
accordingly.

Also there is an implementation of register-driven command buffers, that
overrides the FIFO ring for command processing. It's needed for our upcoming
hardware revision.
* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux: (35 commits)
  drm/vmwgfx: Fix copyright headers
  drm/vmwgfx: Add DX query support. Various fixes.
  drm/vmwgfx: Add command parser support for a couple of DX commands
  drm/vmwgfx: Command parser fixes for DX
  drm/vmwgfx: Initial DX support
  drm/vmwgfx: Update device includes for DX device functionality
  drm: export the DRM permission check code
  drm/vmwgfx: Fix crash when unloading vmwgfx v2
  drm/vmwgfx: Fix framebuffer creation on older hardware
  drm/vmwgfx: Fixed topology boundary checking for Screen Targets
  drm/vmwgfx: Fix an uninitialized value
  drm/vmwgfx: Fix compiler warning with 32-bit dma_addr_t
  drm/vmwgfx: Kill a bunch of sparse warnings
  drm/vmwgfx: Fix kms preferred mode sorting
  drm/vmwgfx: Reinstate the legacy display system dirty callback
  drm/vmwgfx: Implement fbdev on kms v2
  drm/vmwgfx: Add a kernel interface to create a framebuffer v2
  drm/vmwgfx: Avoid cmdbuf alloc sleeping if !TASK_RUNNING
  drm/vmwgfx: Convert screen targets to new helpers v3
  drm/vmwgfx: Convert screen objects to the new helpers
  ...

drm/panel: Changes for v4.3-rc1

This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.

* tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/bridge: Put Kconfig entries in a separate menu
  drm/panel: Add support for LG LG4573 480x800 4.3" panel
  drm/panel: Add display timing for Okaya RS800480T-7X0GP
  of: Add Okaya Electric America vendor prefix
  drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel
  drm/panel: simple: Add support for AUO B080UAN01
  drm/panel: simple: Correct minimum hsync length of the HannStar HSD070PWW1 panel
  drm/panel: simple: Add bus format for HannStar HSD070PWW1 LVDS panel
  drm/bridge: Add vendor prefixes
  drm/panel: Add Samsung prefix to panel drivers
  drm/exynos: Remove PTN3460 dependency

drm/tegra: Changes for v4.3-rc1

There are a bunch of non-critical fixes here that I've collected over
the past few months, but the biggest part is Tegra210 support, in the
DC, DSI and SOR/HDMI drivers.

Also this finally restores DPMS with atomic mode-setting, something
that has been broken since the conversion and which I had originally
expected to take far less longer to fix.

* tag 'drm/tegra/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux: (41 commits)
  drm/tegra: sor: Add HDMI support
  drm/tegra: sor: Add Tegra210 eDP support
  drm/tegra: dc: Implement atomic DPMS
  drm/tegra: sor: Restore DPMS
  drm/tegra: dsi: Restore DPMS
  drm/tegra: hdmi: Restore DPMS
  drm/tegra: rgb: Restore DPMS
  drm/tegra: sor: Use DRM debugfs infrastructure for CRC
  drm/tegra: sor: Write correct head state registers
  drm/tegra: sor: Constify display mode
  drm/tegra: sor: Reset the correct debugfs fields
  drm/tegra: sor: Set minor after debugfs initialization
  drm/tegra: sor: Provide error messages in probe
  drm/tegra: sor: Rename registers for consistency
  drm/tegra: dpaux: Disable interrupt when detached
  drm/tegra: dpaux: Configure pads as I2C by default
  drm/tegra: dpaux: Provide error message in probe
  drm/tegra: dsi: Add Tegra210 support
  drm/tegra: dsi: Add Tegra132 support
  drm/tegra: dsi: Add Tegra124 support
  ...

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
- Clean up HDMI and MIXER parts
- Clean up legacy structures specific to Exynos DRM
  . This patch series removes existing exyons_drm_display and
    exynos_drm_encoder structures specific to Exynos DRM, and
    makes them to replace with common drm_encoder structure.
    With cleanup patch, we removes exynos_drm_encoder module.
- Clean up gem, dmabuf and buffer modules
  . This patch series replaces existing Exynos DRM dmabuf codes
    with common drm prime ones, and embeds all codes of exynos_drm_buf
    into exynos_drm_gem module.
    With cleanup patch, we removes exynos_drm_buf and exynos_drm_dmabuf
    modules.
- And some fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (53 commits)
  drm/exynos: merge exynos_drm_buf.c to exynos_drm_gem.c
  drm/exynos: use prime helpers
  drm/exynos: remove function roundup_gem_size
  drm/exynos: remove function update_vm_cache_attr
  drm/exynos: remove function check_gem_flags
  drm/exynos: use ERR_PTR instead of NULL in exynos_drm_gem_init
  drm/exynos: remove unused fields of struct exynos_drm_gem_buf
  drm/exynos: stop copying sg table
  drm/exynos: remove function exynos_drm_gem_map_buf
  drm/exynos: remove mutex locking in pagefault handler
  drm/exynos: remove function convert_to_vm_err_msg
  drm/exynos: stop using sgtable in page fault handler
  drm/exynos: remove struct exynos_drm_encoder layer
  drm/exynos: fold encoder setup into exynos_drm_load()
  drm/exynos: remove exynos_drm_create_enc_conn()
  drm/exynos: remove exynos_encoder's .commit() op
  drm/exynos: remove extra call to exynos_dp_commit()
  drm/exynos: remove extra call to hdmi_commit()
  drm/exynos: remove struct exynos_drm_display
  drm/exynos: simplify calculation of possible CRTCs
  ...

1) includes all the drm/msm side of things for upstream kernel working
on dragonboard 410c (still some pending work on adv7533 bridge chip)
2) initial support for msm8x94 (snapdragon 810)
3) support for msm8x74v1 (in addition to existing v2 support)
4) support for dma planes on mdp5 (additional planes that cannot scale/csc)
5) more yuv format support for mdp5 (single plane vyuy/uyvy/yuyv/yvyu,
two plane nv16/nv61, and three plane yuv420/yvu420)
6) rotation support for mdp5
7) initial hdcp support
8) fixes, etc

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (46 commits)
  drm/msm/dsi: Introduce DSI configuration module
  drm/msm/dsi: Make each PHY type compilation independent
  drm/msm/dsi: Split PHY drivers to separate files
  drm/msm/dsi: Return void from msm_dsi_phy_disable()
  drm/msm/dsi: Specify bitmask to set source PLL
  drm/msm/mdp: Clear pending interrupt status before enable interrupt
  drm/msm/mdp5: Add rotation (hflip/vflip) support to MDP5 planes (v2)
  drm/msm: add calls to prepare and unprepare panel
  drm/msm/dsi: Modify dsi manager bridge ops to work with external bridges
  drm/msm/dsi: Allow dsi to connect to an external bridge
  drm/msm/dsi: Create a helper to check if there is a connected device
  drm/msm/dsi: Refer to connected device as 'device' instead of 'panel'
  drm/msm/dsi: Make TE gpio optional
  drm/msm: mdp4 lvds: get panel node via of graph parsing
  drm/msm: dsi host: Use device graph parsing to parse connected panel
  drm/msm: dsi host: add missing of_node_put()
  drm/msm: Enable clocks during enable/disable_vblank() callbacks
  drm/msm/mdp5: Add support for msm8x74v1
  drm/msm/mdp5: Add DMA pipe planes for MDP5
  drm/msm/mdp: Add capabilities to MDP planes (v2)
  ...

Merge tag 'drm-intel-next-fixes-2015-08-16' of git://anongit.freedesktop.org/drm-intel into drm-next

Bunch more fixes for 4.3, most of it skl fallout. It's not quite all yet,
there's still a few more patches pending to enable DDI-E correctly on skl.
Also included the dpms atomic work from Maarten since atomic is just a
pain and not including would cause piles of conflicts right from the
start.

* tag 'drm-intel-next-fixes-2015-08-16' of git://anongit.freedesktop.org/drm-intel: (67 commits)
  drm/i915: Per-DDI I_boost override
  drm/i915/skl: WaIgnoreDDIAStrap is forever, always init DDI A
  drm/i915: fix checksum write for automated test reply
  drm/i915: Contain the WA_REG macro
  drm/i915: Remove the failed context from the fpriv->context_idr
  drm/i915: Report IOMMU enabled status for GPU hangs
  drm/i915: Check idle to active before processing CSQ
  drm/i915: Set alternate aux for DDI-E
  drm/i915: Set power domain for DDI-E
  drm/i915: fix stolen bios_reserved checks
  drm/i915: Use masked write for Context Status Buffer Pointer
  drm/i915/skl WaDisableSbeCacheDispatchPortSharing
  drm/i915: Spam less on dp aux send/receive problems
  drm/i915: Handle return value in intel_pin_and_fence_fb_obj, v2.
  drm/i915: Only update mode related state if a modeset happened.
  drm/i915: Remove connectors_active.
  drm/i915: Remove connectors_active from intel_dp.c, v2.
  drm/i915: Remove connectors_active from sanitization, v2.
  drm/i915: Get rid of dpms handling.
  drm/i915: Make crtc checking use the atomic state, v2.
  ...

Linux 4.2-rc7

Backmerge master for i915 fixes

Pull ARM SoC fixes from Olof Johansson:
 "A smallish batch of fixes, a little more than expected this late, but
  all fixes are contained to their platforms and seem reasonably low
  risk:

   - a somewhat large SMP fix for ux500 that still seemed warranted to
     include here
   - OMAP DT fixes for pbias regulator specification that broke due to
     some DT reshuffling
   - PCIe IRQ routing bugfix for i.MX
   - networking fixes for keystone
   - runtime PM for OMAP GPMC
   - a couple of error path bug fixes for exynos"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file
  ARM: dts: keystone: fix the clock node for mdio
  memory: omap-gpmc: Don't try to save uninitialized GPMC context
  ARM: imx6: correct i.MX6 PCIe interrupt routing
  ARM: ux500: add an SMP enablement type and move cpu nodes
  ARM: dts: dra7: Fix broken pbias device creation
  ARM: dts: OMAP5: Fix broken pbias device creation
  ARM: dts: OMAP4: Fix broken pbias device creation
  ARM: dts: omap243x: Fix broken pbias device creation
  ARM: EXYNOS: fix double of_node_put() on error path
  ARM: EXYNOS: Fix potentian kfree() of ro memory

Pull MIPS bugfix from Ralf Baechle:
 "Only a single MIPS fix - the math when invoking syscall_trace_enter
  was wrong"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix seccomp syscall argument for MIPS64

Merge x86 fixes from Ingo Molnar:
 "Two followup fixes related to the previous LDT fix"

Also applied a further FPU emulation fix from Andy Lutomirski to the
branch before actually merging it.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
  x86/ldt: Further fix FPU emulation
  x86/ldt: Correct FPU emulation access to LDT
  x86/ldt: Correct LDT access in single stepping logic

The previous fix confused a selector with a segment prefix.  Fix it.

Compile-tested only.

Cc: stable@vger.kernel.org
Cc: Juergen Gross <jgross@suse.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 4809146b ("x86/ldt: Correct FPU emulation access to LDT")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse_dev_ioctl() performed fuse_get_dev() on a user-supplied fd,
leading to a type confusion issue. Fix it by checking file->f_op.
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'keystone-dts-late-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes

ARM: Couple of Keysyone MDIO DTS fixes for 4.2-rc6+

These are necessary to get the NIC card working on all Keystone
EVMs. Couple of boards are broken without these two fixes.

* tag 'keystone-dts-late-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file
  ARM: dts: keystone: fix the clock node for mdio
Signed-off-by: Olof Johansson <olof@lixom.net>

Commit 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)")
fixed indirect system calls on O32 but it also introduced a bug for MIPS64
where it erroneously modified the v0 (syscall) register with the assumption
that the sycall offset hasn't been taken into consideration. This breaks
seccomp on MIPS64 n64 and n32 ABIs. We fix this by replacing the addition
with a move instruction.

Fixes: 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)")
Cc: <stable@vger.kernel.org> # 3.15+
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10951/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The struct exynos_drm_gem_obj can have fields of the struct
exynos_drm_gem_buf then don't need to use exynos_drm_buf.c file.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The dma-buf codes of exynos drm is almost same with prime helpers. A
difference is that consider DMA_NONE when import dma-buf, but it's wrong
and we don't consider it any more, so we can use prime interface.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The function roundup_gem_size can be merged in exynos_drm_gem_create.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The function update_vm_cache_attr can be merged in exynos_drm_gem_mmap.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The function check_gem_flags is too simple, so it's better to move codes
in each consumer functions.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

For more correct error information.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The userptr, write and pfnmap of struct exynos_drm_gem_buf are not used
anywhere.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Already struct exynos_drm_gem_buf has pages of the buffer, so we don't
need to copy from sg table of the buffer to sg table of dma-buf
attachment, just can make sg table from pages of the buffer.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The exynos_drm_gem_map_buf can be merged in exynos_drm_gem_fault.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

There is no reason to use mutex locking in pagefault handler.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The convert_to_vm_err_msg is called just once by exynos_drm_gem_fault,
so it's simple not to use the function.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>