In a way similar to ARM commit 09096f6a ("ARM: 7822/1: add workaround
for ambiguous C99 stdint.h types"), this patch redefines the macros that
are used in stdint.h so its definitions of uint64_t and int64_t are
compatible with those of the kernel.

This patch comes from: https://patchwork.kernel.org/patch/3540001/
Wrote by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

We mark this file as a private file and don't have to override asm/types.h
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The comment about SYS_MEMBARRIER_SYNC_CORE relying on ERET being
context-synchronizing is confusing and misplaced with kpti. Given that
this is already documented under Documentation/ (see arch-support.txt
for membarrier), remove the comment altogether.
Signed-off-by: Will Deacon <will.deacon@arm.com>

Some CPUs can speculate past an ERET instruction and potentially perform
speculative accesses to memory before processing the exception return.
Since the register state is often controlled by a lower privilege level
at the point of an ERET, this could potentially be used as part of a
side-channel attack.

This patch emits an SB sequence after each ERET so that speculation is
held up on exception return.
Signed-off-by: Will Deacon <will.deacon@arm.com>

We currently use a DSB; ISB sequence to inhibit speculation in set_fs().
Whilst this works for current CPUs, future CPUs may implement a new SB
barrier instruction which acts as an architected speculation barrier.

On CPUs that support it, patch in an SB; NOP sequence over the DSB; ISB
sequence and advertise the presence of the new instruction to userspace.
Signed-off-by: Will Deacon <will.deacon@arm.com>

We use a stop_machine call for each available capability to
enable it on all the CPUs available at boot time. Instead
we could batch the cpu_enable callbacks to a single stop_machine()
call to save us some time.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Use the sorted list of capability entries for the detection and
verification.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Make use of the sorted capability list to access the capability
entry in this_cpu_has_cap() to avoid iterating over the two
tables.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

We maintain two separate tables of capabilities, errata and features,
which decide the system capabilities. We iterate over each of these
tables for various operations (e.g, detection, verification etc.).
We do not have a way to map a system "capability" to its entry,
(i.e, cap -> struct arm64_cpu_capabilities) which is needed for
this_cpu_has_cap(). So we iterate over the table one by one to
find the entry and then do the operation. Also, this prevents
us from optimizing the way we "enable" the capabilities on the
CPUs, where we now issue a stop_machine() for each available
capability.

One solution is to merge the two tables into a single table,
sorted by the capability. But this is has the following
disadvantages:
  - We loose the "classification" of an errata vs. feature
  - It is quite easy to make a mistake when adding an entry,
    unless we sort the table at runtime.

So we maintain a list of pointers to the capability entry, sorted
by the "cap number" in a separate array, initialized at boot time.
The only restriction is that we can have one "entry" per capability.
While at it, remove the duplicate declaration of arm64_errata table.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Remove duplicate entries for Qualcomm erratum 1003. Since the entries
are not purely based on generic MIDR checks, use the multi_cap_entry
type to merge the entries.

Cc: Christopher Covington <cov@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Merge duplicate entries for a single capability using the midr
range list for Cavium errata 30115 and 27456.

Cc: Andrew Pinski <apinski@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

We have two entries for ARM64_WORKAROUND_CLEAN_CACHE capability :

1) ARM Errata 826319, 827319, 824069, 819472 on A53 r0p[012]
2) ARM Errata 819472 on A53 r0p[01]

Both have the same work around. Merge these entries to avoid
duplicate entries for a single capability. Add a new Kconfig
entry to control the "capability" entry to make it easier
to handle combinations of the CONFIGs.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

readelf complains about the section layout of vmlinux when building
with CONFIG_RELOCATABLE=y (for KASLR):

  readelf: Warning: [21]: Link field (0) should index a symtab section.
  readelf: Warning: [21]: Info field (0) should index a relocatable section.

Also, it seems that our use of '-pie -shared' is contradictory, and
thus ambiguous. In general, the way KASLR is wired up at the moment
is highly tailored to how ld.bfd happens to implement (and conflate)
PIE executables and shared libraries, so given the current effort to
support other toolchains, let's fix some of these issues as well.

- Drop the -pie linker argument and just leave -shared. In ld.bfd,
  the differences between them are unclear (except for the ELF type
  of the produced image [0]) but lld chokes on seeing both at the
  same time.

- Rename the .rela output section to .rela.dyn, as is customary for
  shared libraries and PIE executables, so that it is not misidentified
  by readelf as a static relocation section (producing the warnings
  above).

- Pass the -z notext and -z norelro options to explicitly instruct the
  linker to permit text relocations, and to omit the RELRO program
  header (which requires a certain section layout that we don't adhere
  to in the kernel). These are the defaults for current versions of
  ld.bfd.

- Discard .eh_frame and .gnu.hash sections to avoid them from being
  emitted between .head.text and .text, screwing up the section layout.

These changes only affect the ELF image, and produce the same binary
image.

[0] b9dce7f1 ("arm64: kernel: force ET_DYN ELF type for ...")

Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Smith <peter.smith@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Improve the performance of the crc32() asm routines by getting rid of
most of the branches and small sized loads on the common path.

Instead, use a branchless code path involving overlapping 16 byte
loads to process the first (length % 32) bytes, and process the
remainder using a loop that processes 32 bytes at a time.

Tested using the following test program:

  #include <stdlib.h>

  extern void crc32_le(unsigned short, char const*, int);

  int main(void)
  {
    static const char buf[4096];

    srand(20181126);

    for (int i = 0; i < 100 * 1000 * 1000; i++)
      crc32_le(0, buf, rand() % 1024);

    return 0;
  }

On Cortex-A53 and Cortex-A57, the performance regresses but only very
slightly. On Cortex-A72 however, the performance improves from

  $ time ./crc32

  real  0m10.149s
  user  0m10.149s
  sys   0m0.000s

to

  $ time ./crc32

  real  0m7.915s
  user  0m7.915s
  sys   0m0.000s

Cc: Rui Sun <sunrui26@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The core ftrace hooks take the instrumented PC in x0, but for some
reason arm64's prepare_ftrace_return() takes this in x1.

For consistency, let's flip the argument order and always pass the
instrumented PC in x0.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The save_return_regs and restore_return_regs macros are only used by
return_to_handler, and having them defined out-of-line only serves to
obscure the logic.

Before we complicate, let's clean this up and fold the logic directly
into return_to_handler, saving a few lines of macro boilerplate in the
process. At the same time, a missing trailing space is added to the
comments, fixing a code style violation.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The core ftrace code requires that when it is handed the PC of an
instrumented function, this PC is the address of the instrumented
instruction. This is necessary so that the core ftrace code can identify
the specific instrumentation site. Since the instrumented function will
be a BL, the address of the instrumented function is LR - 4 at entry to
the ftrace code.

This fixup is applied in the mcount_get_pc and mcount_get_pc0 helpers,
which acquire the PC of the instrumented function.

The mcount_get_lr helper is used to acquire the LR of the instrumented
function, whose value does not require this adjustment, and cannot be
adjusted to anything meaningful. No adjustment of this value is made on
other architectures, including arm. However, arm64 adjusts this value by
4.

This patch brings arm64 in line with other architectures and removes the
adjustment of the LR value.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The core frace code has an optional sanity check on the frame pointer
passed by ftrace_graph_caller and return_to_handler. This is cheap,
useful, and enabled unconditionally on x86, sparc, and riscv.

Let's do the same on arm64, so that we can catch any problems early.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The global exports of ftrace_call and ftrace_graph_call are somewhat
painful to read. Let's use the generic GLOBAL() macro to ameliorate
matters.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Declaring a global symbol in assembly is tedious, error-prone, and
painful to read. While ENTRY() exists, this is supposed to be used for
function entry points, and this affects alignment in a potentially
undesireable manner.

Instead, let's add a generic GLOBAL() macro for this, as x86 added
locally in commit:

  95695547 ("x86: asm linkage - introduce GLOBAL macro")

... thus allowing us to use this more freely in the kernel.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Commit 1212f7a1 ("scripts/kallsyms: filter arm64's __efistub_
symbols") updated the kallsyms code to filter out symbols with
the __efistub_ prefix explicitly, so we no longer require the
hack in our linker script to emit them as absolute symbols.

Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

As of commit 6460d320 ("arm64: io: Ensure calls to delay routines
are ordered against prior readX()"), MMIO reads smaller than 64 bits
fail to compile under clang because we end up mixing 32-bit and 64-bit
register operands for the same data processing instruction:

./include/asm-generic/io.h:695:9: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
        return readb(addr);
               ^
./arch/arm64/include/asm/io.h:147:58: note: expanded from macro 'readb'
                                                                       ^
./include/asm-generic/io.h:695:9: note: use constraint modifier "w"
./arch/arm64/include/asm/io.h:147:50: note: expanded from macro 'readb'
                                                               ^
./arch/arm64/include/asm/io.h:118:24: note: expanded from macro '__iormb'
        asm volatile("eor       %0, %1, %1\n"                           \
                                    ^

Fix the build by casting the macro argument to 'unsigned long' when used
as an input to the inline asm.
Reported-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

In order to reduce the possibility of soft lock-ups, we bound the
maximum number of TLBI operations performed by a single call to
flush_tlb_range() to an arbitrary constant of 1024.

Whilst this does the job of avoiding lock-ups, we can actually be a bit
smarter by defining this as PTRS_PER_PTE. Due to the structure of our
page tables, using PTRS_PER_PTE means that an outer loop calling
flush_tlb_range() for entire table entries will end up performing just a
single TLBI operation for each entry. As an example, mremap()ing a 1GB
range mapped using 4k pages now requires only 512 TLBI operations when
moving the page tables as opposed to 262144 operations (512*512) when
using the current threshold of 1024.

Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Now that we have switched to the small code model entirely, and
reduced the extended KASLR range to 4 GB, we can be sure that the
targets of relative branches that are out of range are in range
for a ADRP/ADD pair, which is one instruction shorter than our
current MOVN/MOVK/MOVK sequence, and is more idiomatic and so it
is more likely to be implemented efficiently by micro-architectures.

So switch over the ordinary PLT code and the special handling of
the Cortex-A53 ADRP errata, as well as the ftrace trampline
handling.
Reviewed-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: Added a couple of comments in the plt equality check]
Signed-off-by: Will Deacon <will.deacon@arm.com>

Add support for emitting ADR and ADRP instructions so we can switch
over our PLT generation code in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

__install_bp_hardening_cb() is called via stop_machine() as part
of the cpu_enable callback. To force each CPU to take its turn
when allocating slots, they take a spinlock.

With the RT patches applied, the spinlock becomes a mutex,
and we get warnings about sleeping while in stop_machine():
| [    0.319176] CPU features: detected: RAS Extension Support
| [    0.319950] BUG: scheduling while atomic: migration/3/36/0x00000002
| [    0.319955] Modules linked in:
| [    0.319958] Preemption disabled at:
| [    0.319969] [<ffff000008181ae4>] cpu_stopper_thread+0x7c/0x108
| [    0.319973] CPU: 3 PID: 36 Comm: migration/3 Not tainted 4.19.1-rt3-00250-g330fc2c2a880 #2
| [    0.319975] Hardware name: linux,dummy-virt (DT)
| [    0.319976] Call trace:
| [    0.319981]  dump_backtrace+0x0/0x148
| [    0.319983]  show_stack+0x14/0x20
| [    0.319987]  dump_stack+0x80/0xa4
| [    0.319989]  __schedule_bug+0x94/0xb0
| [    0.319991]  __schedule+0x510/0x560
| [    0.319992]  schedule+0x38/0xe8
| [    0.319994]  rt_spin_lock_slowlock_locked+0xf0/0x278
| [    0.319996]  rt_spin_lock_slowlock+0x5c/0x90
| [    0.319998]  rt_spin_lock+0x54/0x58
| [    0.320000]  enable_smccc_arch_workaround_1+0xdc/0x260
| [    0.320001]  __enable_cpu_capability+0x10/0x20
| [    0.320003]  multi_cpu_stop+0x84/0x108
| [    0.320004]  cpu_stopper_thread+0x84/0x108
| [    0.320008]  smpboot_thread_fn+0x1e8/0x2b0
| [    0.320009]  kthread+0x124/0x128
| [    0.320010]  ret_from_fork+0x10/0x18

Switch this to a raw spinlock, as we know this is only called with
IRQs masked.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The BAD_MADT_GICC_ENTRY check is a little too strict because
it rejects MADT entries that don't match the currently known
lengths. We should remove this restriction to avoid problems
if the table length changes. Future code which might depend on
additional fields should be written to validate those fields
before using them, rather than trying to globally check
known MADT version lengths.

Link: https://lkml.kernel.org/r/20181012192937.3819951-1-jeremy.linton@arm.comSigned-off-by: Jeremy Linton <jeremy.linton@arm.com>
[lorenzo.pieralisi@arm.com: added MADT macro comments]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Al Stone <ahs3@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>

A relatively standard idiom for ensuring that a pair of MMIO writes to a
device arrive at that device with a specified minimum delay between them
is as follows:

	writel_relaxed(42, dev_base + CTL1);
	readl(dev_base + CTL1);
	udelay(10);
	writel_relaxed(42, dev_base + CTL2);

the intention being that the read-back from the device will push the
prior write to CTL1, and the udelay will hold up the write to CTL1 until
at least 10us have elapsed.

Unfortunately, on arm64 where the underlying delay loop is implemented
as a read of the architected counter, the CPU does not guarantee
ordering from the readl() to the delay loop and therefore the delay loop
could in theory be speculated and not provide the desired interval
between the two writes.

Fix this in a similar manner to PowerPC by introducing a dummy control
dependency on the output of readX() which, combined with the ISB in the
read of the architected counter, guarantees that a subsequent delay loop
can not be executed until the readX() has returned its result.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>

When transitioning a PTE from young to old as part of page aging, we
can avoid waiting for the TLB invalidation to complete and therefore
drop the subsequent DSB instruction. Whilst this opens up a race with
page reclaim, where a PTE in active use via a stale, young TLB entry
does not update the underlying descriptor, the worst thing that happens
is that the page is reclaimed and then immediately faulted back in.

Given that we have a DSB in our context-switch path, the window for a
spurious reclaim is fairly limited and eliding the barrier claims to
boost NVMe/SSD accesses by over 10% on some platforms.

A similar optimisation was made for x86 in commit b13b1d2d ("x86/mm:
In the PTE swapout page reclaim case clear the accessed bit instead of
flushing the TLB").
Signed-off-by: Alex Van Brunt <avanbrunt@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
[will: rewrote patch]
Signed-off-by: Will Deacon <will.deacon@arm.com>

Instead of saving a pointer to the .plt and .init.plt sections to apply
plt-based relocations, save and use their section indices instead.

The mod->arch.{core,init}.plt pointers were problematic for livepatch
because they pointed within temporary section headers (provided by the
module loader via info->sechdrs) that would be freed after module load.
Since livepatch modules may need to apply relocations post-module-load
(for example, to patch a module that is loaded later), using section
indices to offset into the section headers (instead of accessing them
through a saved pointer) allows livepatch modules on arm64 to pass in
their own copy of the section headers to apply_relocate_add() to apply
delayed relocations.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

On arm64, we use block mappings and contiguous hints to map the linear
region, to minimize the TLB footprint. However, this means that the
entire region is mapped using read/write permissions, which we cannot
modify at page granularity without having to take intrusive measures to
prevent TLB conflicts.

This means the linear aliases of pages belonging to read-only mappings
(executable or otherwise) in the vmalloc region are also mapped read/write,
and could potentially be abused to modify things like module code, bpf JIT
code or other read-only data.

So let's fix this, by extending the set_memory_ro/rw routines to take
the linear alias into account. The consequence of enabling this is
that we can no longer use block mappings or contiguous hints, so in
cases where the TLB footprint of the linear region is a bottleneck,
performance may be affected.

Therefore, allow this feature to be runtime en/disabled, by setting
rodata=full (or 'on' to disable just this enhancement, or 'off' to
disable read-only mappings for code and r/o data entirely) on the
kernel command line. Also, allow the default value to be set via a
Kconfig option.
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Call vm_unmap_aliases() every time we apply any changes to permission
attributes of mappings in the vmalloc region. This avoids any potential
issues resulting from lingering writable or executable aliases of
mappings that should be read-only or non-executable, respectively.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull libnvdimm fixes from Dan Williams:
 "A small batch of fixes for v4.20-rc3.

  The overflow continuation fix addresses something that has been broken
  for several releases. Arguably it could wait even longer, but it's a
  one line fix and this finishes the last of the known address range
  scrub bug reports. The revert addresses a lockdep regression. The unit
  tests are not critical to fix, but no reason to hold this fix back.

  Summary:

   - Address Range Scrub overflow continuation handling has been broken
     since it was initially merged. It was only recently that error
     injection and platform-BIOS support enabled this corner case to be
     exercised.

   - The recent attempt to provide more isolation for the kernel Address
     Range Scrub state machine from userapace initiated sessions
     triggers a lockdep report. Revert and try again at the next merge
     window.

   - Fix a kasan reported buffer overflow in libnvdimm unit test
     infrastrucutre (nfit_test)"

* tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  Revert "acpi, nfit: Further restrict userspace ARS start requests"
  acpi, nfit: Fix ARS overflow continuation
  tools/testing/nvdimm: Fix the array size for dimm devices.

Merge misc fixes from Andrew Morton:
 "16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memblock.c: fix a typo in __next_mem_pfn_range() comments
  mm, page_alloc: check for max order in hot path
  scripts/spdxcheck.py: make python3 compliant
  tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
  lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
  mm/vmstat.c: fix NUMA statistics updates
  mm/gup.c: fix follow_page_mask() kerneldoc comment
  ocfs2: free up write context when direct IO failed
  scripts/faddr2line: fix location of start_kernel in comment
  mm: don't reclaim inodes with many attached pages
  mm, memory_hotplug: check zone_movable in has_unmovable_pages
  mm/swapfile.c: use kvzalloc for swap_info_struct allocation
  MAINTAINERS: update OMAP MMC entry
  hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
  kernel/sched/psi.c: simplify cgroup_move_task()
  z3fold: fix possible reclaim races

Pull scheduler fix from Ingo Molnar:
 "Fix an exec() related scalability/performance regression, which was
  caused by incorrectly calculating load and migrating tasks on exec()
  when they shouldn't be"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix cpu_util_wake() for 'execl' type workloads

Pull perf fixes from Ingo Molnar:
 "Fix uncore PMU enumeration for CofeeLake CPUs"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Support CoffeeLake 8th CBOX
  perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs

Pull EFI fixes from Ingo Molnar:
 "Misc fixes: two warning splat fixes, a leak fix and persistent memory
  allocation fixes for ARM"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Permit calling efi_mem_reserve_persistent() from atomic context
  efi/arm: Defer persistent reservations until after paging_init()
  efi/arm/libstub: Pack FDT after populating it
  efi/arm: Revert deferred unmap of early memmap mapping
  efi: Fix debugobjects warning on 'efi_rts_work'

Pull ARM spectre updates from Russell King:
 "These are the currently known final bits that resolve the Spectre
  issues. big.Little systems used to be sufficiently identical in that
  there were no differences between individual CPUs in the system that
  mattered to the kernel. With the advent of the Spectre problem, the
  CPUs now have differences in how the workaround is applied.

  As a result of previous Spectre patches, these systems ended up
  reporting quite a lot of:

     "CPUx: Spectre v2: incorrect context switching function, system vulnerable"

  messages due to the action of the big.Little switcher causing the CPUs
  to be re-initialised regularly. This series resolves that issue by
  making the CPU vtable unique to each CPU.

  However, since this is used very early, before per-cpu is setup,
  per-cpu can't be used. We also have a problem that two of the methods
  are not called from preempt-safe paths, but thankfully these remain
  identical between all CPUs in the system. To make sure, we validate
  that these are identical during boot"

* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: spectre-v2: per-CPU vtables to work around big.Little systems
  ARM: add PROC_VTABLE and PROC_TABLE macros
  ARM: clean up per-processor check_bugs method call
  ARM: split out processor lookup
  ARM: make lookup_processor_type() non-__init

Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.comSigned-off-by: Chen Chang <rainccrun@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Konstantin has noticed that kvmalloc might trigger the following
warning:

  WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60
  [...]
  Call Trace:
   fragmentation_index+0x76/0x90
   compaction_suitable+0x4f/0xf0
   shrink_node+0x295/0x310
   node_reclaim+0x205/0x250
   get_page_from_freelist+0x649/0xad0
   __alloc_pages_nodemask+0x12a/0x2a0
   kmalloc_large_node+0x47/0x90
   __kmalloc_node+0x22b/0x2e0
   kvmalloc_node+0x3e/0x70
   xt_alloc_table_info+0x3a/0x80 [x_tables]
   do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables]
   nf_setsockopt+0x44/0x60
   SyS_setsockopt+0x6f/0xc0
   do_syscall_64+0x67/0x120
   entry_SYSCALL_64_after_hwframe+0x3d/0xa2

the problem is that we only check for an out of bound order in the slow
path and the node reclaim might happen from the fast path already.  This
is fixable by making sure that kvmalloc doesn't ever use kmalloc for
requests that are larger than KMALLOC_MAX_SIZE but this also shows that
the code is rather fragile.  A recent UBSAN report just underlines that
by the following report

  UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19
  shift exponent 51 is too large for 32-bit type 'int'
  CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0xd2/0x148 lib/dump_stack.c:113
   ubsan_epilogue+0x12/0x94 lib/ubsan.c:159
   __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425
   __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117
   zone_watermark_fast mm/page_alloc.c:3216 [inline]
   get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300
   __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370
   alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093
   alloc_pages include/linux/gfp.h:509 [inline]
   __get_free_pages+0x12/0x60 mm/page_alloc.c:4414
   dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156
   raw_cmd_copyin drivers/block/floppy.c:3159 [inline]
   raw_cmd_ioctl drivers/block/floppy.c:3206 [inline]
   fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544
   fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571
   __blkdev_driver_ioctl block/ioctl.c:303 [inline]
   blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601
   block_ioctl+0x105/0x150 fs/block_dev.c:1883
   vfs_ioctl fs/ioctl.c:46 [inline]
   do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687
   ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702
   __do_sys_ioctl fs/ioctl.c:709 [inline]
   __se_sys_ioctl fs/ioctl.c:707 [inline]
   __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707
   do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Note that this is not a kvmalloc path.  It is just that the fast path
really depends on having sanitzed order as well.  Therefore move the
order check to the fast path.

Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.czSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Byoungyoung Lee <lifeasageek@gmail.com>
Cc: "Dae R. Jeong" <threeearcat@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>