- 26 Feb, 2018 40 commits
-
-
Mauro Carvalho Chehab authored
Solve the following warnings: + drivers/media/i2c/tvp514x.c: warning: Excess function parameter 'a' description in 'tvp514x_g_frame_interval': => 759 + drivers/media/i2c/tvp514x.c: warning: Excess function parameter 'a' description in 'tvp514x_s_frame_interval': => 784 + drivers/media/i2c/tvp514x.c: warning: Function parameter or member 'ival' not described in 'tvp514x_g_frame_interval': => 759 + drivers/media/i2c/tvp514x.c: warning: Function parameter or member 'ival' not described in 'tvp514x_s_frame_interval': => 784 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Fix this warning regression: drivers/media/i2c/ov7740.c: warning: variable 'ret' set but not used [-Wunused-but-set-variable]: => 276:6 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Kieran Bingham authored
The ADV748x handles interlaced media using V4L2_FIELD_ALTERNATE field types. The correct specification for the height on the mbus is the image height, in this instance, the field height. The AFE component already correctly adjusts the height on the mbus, but the HDMI component got left behind. Adjust the mbus height to correctly describe the image height of the fields when processing interlaced video for HDMI pipelines. Fixes: 3e89586a ("media: i2c: adv748x: add adv748x driver") Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Kieran Bingham authored
The v4l2_mbus_fmt width and height corresponds directly with the v4l2_pix_format definitions, yet the differences in documentation make it ambiguous what to do in the event of field heights. Clarify this using the same text as is provided for the v4l2_pix_format which is explicit on the matter, and by matching the terminology of 'image height' rather than the misleading 'frame height'. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antonio Cardace authored
Use %*ph format to print small buffer as hex string. Remove newline at the end of the format string as it would be duplicated by the one supplied as last argument. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antonio Cardace <anto.cardace@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
If CEC is not enabled for the vivid driver, then the adap pointer is NULL and 'adap->phys_addr' will fail. Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antonio Cardace authored
Use %*phC format to print small buffers as hex strings Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antonio Cardace <anto.cardace@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
cec_transmit_msg_fh() first checked the message for errors, and only after the message was found to be valid did it log the message contents. However, that makes it hard to associate an error in the kernel log with the message since the message contents was never logged in that case. So swap the order: first log the message (once some very basic checks are done), and only after that check for errors. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Corentin Labbe authored
ivtv-alsa-mixer functions was introduced in commit 269c11fb ("[media] ivtv, ivtv-alsa: Add initial ivtv-alsa interface driver for ivtv") But according to commit message, ivtv-alsa-mixer.c was already dead code. 5 years after, we should remove it. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: removed forgotten ivtv-alsa-mixer.h include] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Corentin Labbe authored
cx18-alsa-mixer functions are not used since commit 4cb565cc ("V4L/DVB: cx18: make it so cx18-alsa-main.c compiles") 9 year later, let's just remove them. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Add suffix ULL to constant 10 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64 (64 bits, unsigned). The expression len * 10 * CEC_TIM_DATA_BIT_TOTAL is currently being evaluated using 32-bit arithmetic. Also, remove unnecessary parentheses and add a code comment to make it clear what is the reason of the code change. Addresses-Coverity-ID: 1454996 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Cast left and top to dma_addr_t in order to give the compiler complete information about the proper arithmetic to use. Notice that these variables are being used in contexts that expect expressions of type dma_addr_t (64 bit, unsigned). Such expressions are currently being evaluated using 32-bit arithmetic. Also, move the expression (((dma_addr_t)left * veu->vfmt_out.fmt->depth) >> 3) at the end in order to avoid a line wrapping checkpatch.pl warning. Addresses-Coverity-ID: 1056807 ("Unintentional integer overflow") Addresses-Coverity-ID: 1056808 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Cast p to dma_addr_t in order to avoid a potential integer overflow. This variable is being used in a context that expects an expression of type dma_addr_t (u64). The expression p << PAGE_SHIFT is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1458347 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Add suffix LL to constant 1000000 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type ktime_t (64 bits, signed). The expression ir->polling * 1000000 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1392628 ("Unintentional integer overflow") Addresses-Coverity-ID: 1392630 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Add suffix LL to constant 2 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type s64 (64 bits, signed). The expression 2 * (clock_rate - abs_nco_freq) is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1446589 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Add suffix ULL to constant 10 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64 (64 bits, unsigned). The expression fpxin = state->config->xin * 10 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 200604 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Add suffix ULL to constant 7 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64 (64 bits, unsigned). The expression dev->pdata->clk * 7 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1271223 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Masami Hiramatsu authored
Fixes vb2_vmalloc_get_userptr() to ioremap correct area. Since the current code does ioremap the page address, if the offset > 0, it does not do ioremap the last page and results in kernel panic. This fixes to pass the size + offset to ioremap so that ioremap can map correct area. Also, this uses __pfn_to_phys() to get the physical address of given PFN. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reported-by: Takao Orito <orito.takao@socionext.com> Reported-by: Fumihiro ATSUMI <atsumi@infinitegra.co.jp> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Alexandre Courbot authored
v4l2_fh.h uses the IS_ENABLED() macro and thus should include kconfig.h. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Alexandre Courbot authored
The description for VIDIOC_PREPARE_BUF results in the following sentence: "...before actually enqueuing it, using the ioctl VIDIOC_QBUF, VIDIOC_DQBUF ioctl...". The intent is to only refer to VIDIOC_QBUF though, so fix this. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
The __v4l2_ctrl_modify_range is the unlocked variant, so the comment about taking a lock is obviously wrong. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Sakari Ailus authored
If buffers were prepared or queued and the buffers were released without starting the queue, the finish mem op (corresponding to the prepare mem op) was never called to the buffers. Before commit a136f59c there was no need to do this as in such a case the prepare mem op had not been called yet. Address the problem by explicitly calling finish mem op when the queue is stopped if the buffer is in either prepared or queued state. Fixes: a136f59c ("[media] vb2: Move buffer cache synchronisation to prepare from queue") Cc: stable@vger.kernel.org # for v4.13 and up Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
The vivid driver has two custom controls that change the behavior of RDS. Depending on the control setting the V4L2_CAP_READWRITE capability is toggled. However, after an earlier commit the capability was no longer set correctly. This is now fixed. Fixes: 9765a32c ("vivid: set device_caps in video_device") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Colin Ian King authored
Currently an out of range dev->nr is detected by just reporting the issue and later on an out-of-bounds read on array card occurs because of this. Fix this by checking the upper range of dev->nr with the size of array card (removes the hard coded size), move this check earlier and also exit with the error -ENOSYS to avoid the later out-of-bounds array read. Detected by CoverityScan, CID#711191 ("Out-of-bounds-read") Fixes: commit 02b20b0b ("V4L/DVB (12730): Add conexant cx25821 driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: %ld -> %zd] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Niklas Söderlund authored
A recent change to the media_entity_to_video_device() macro breaks some use-cases for the macro due to a symbol collision. Before the change this worked: vdev = media_entity_to_video_device(link->sink->entity); While after the change it results in a compiler error "error: 'struct video_device' has no member named 'link'; did you mean 'lock'?". While the following still works after the change. struct media_entity *entity = link->sink->entity; vdev = media_entity_to_video_device(entity); Fix the collision by renaming the macro argument to '__entity'. Fixes: 69b925c5 ("media: v4l2-dev.h: add kernel-doc to two macros") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Christopher Díaz Riveros authored
Given the following definitions from s2255drv.c #define LINE_SZ_4CIFS_NTSC 640 #define LINE_SZ_2CIFS_NTSC 640 #define LINE_SZ_1CIFS_NTSC 320 and #define LINE_SZ_4CIFS_PAL 704 #define LINE_SZ_2CIFS_PAL 704 #define LINE_SZ_1CIFS_PAL 352 f->fmt.pix.width possible values can be reduced to LINE_SZ_4CIFS_NTSC or LINE_SZ_1CIFS_NTSC. This patch removes unneeded if else blocks in vidioc_try_fmt_vid_cap function. This issue was detected by using the Coccinelle software. Signed-off-by: Christopher Díaz Riveros <chrisadr@gentoo.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Fix inconsistent IS_ERR and PTR_ERR in vdic_get_ipu_resources. The proper pointer to be passed as argument is ch. This issue was detected with the help of Coccinelle. Fixes: 0b2e9e79 ("media: staging/imx: remove confusing IS_ERR_OR_NULL usage") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Steve Longerbeam <steve_longerbeam@mentor.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo Padovan authored
The link was showing both VIDIOC_QBUF, VIDIOC_DQBUF while it should show only VIDIOC_QBUF in this case. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Wei Yongjun authored
Fix to return error code -ENODEV from the dma_request_slave_channel() error handling case instead of 0, as done elsewhere in this function. rc can be overwrite to 0 by dmaengine_slave_config() in the for loop. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ramesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ian Douglas Scott authored
Add support for a new USB ID in this driver. Signed-off-by: Ian Douglas Scott <ian@iandouglasscott.com> [hans.verkuil@cisco.com: add commit message] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Shuah Khan authored
Replace GPL license statement with SPDX GPL-2.0 license identifier. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Tomasz Figa authored
Currently the driver signals the source change event only in case of a midstream resolution change, however the initial format detection is also defined as a source change by the V4L2 codec API specification. Fix this by signaling the event after the initial header is parsed as well. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Wu-Cheng Li <wuchengli@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Oliver Neukum authored
Quoting the original report: It looks like there is a double-free vulnerability in Linux usbtv driver on an error path of usbtv_probe function. When audio registration fails, usbtv_video_free function ends up freeing usbtv data structure, which gets freed the second time under usbtv_video_fail label. usbtv_audio_fail: usbtv_video_free(usbtv); => v4l2_device_put(&usbtv->v4l2_dev); => v4l2_device_put => kref_put => v4l2_device_release => usbtv_release (CALLBACK) => kfree(usbtv) (1st time) usbtv_video_fail: usb_set_intfdata(intf, NULL); usb_put_dev(usbtv->udev); kfree(usbtv); (2nd time) So, as we have refcounting, use it Reported-by: Yavuz, Tuba <tuba@ece.ufl.edu> Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Xiongfeng Wang authored
gcc-8 reports drivers/media/media-device.c: In function 'media_device_get_topology': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 64 equals destination size [-Wstringop-truncation] We need to use strlcpy() to make sure the dest string is nul-terminated. Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Philipp Zabel authored
While the h.264 standard only allows up to 16 reference frames, the CODA firmware needs two more buffers: one to hold the currently decoded frame and one for the display frame. Adding the framebuffer needed by the driver for VDOA operation brings the total to a maximum of 19 internal framebuffers. Lift the current maximum of 17 internal framebuffers to allow playback of high profile streams that require more than 14 reference frames. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Arnd Bergmann authored
After the move of videobuf2 into the common directory, selecting the au0828 driver with CONFIG_V4L2 disabled started causing a link failure, as we now attempt to build videobuf2 but it still requires v4l2: ERROR: "v4l2_event_pending" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "v4l2_fh_release" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "video_devdata" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "__tracepoint_vb2_buf_done" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "__tracepoint_vb2_dqbuf" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "v4l_vb2q_enable_media_source" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! We want to be able to build the core au0828 support without V4L2, so this makes the 'select' conditional on V4L2, and refines the dependencies in VIDEO_AU0828_V4L2 so it can only be enabled in the exact conditions that have VIDEOBUF2_VMALLOC reachable. Fixes: 03fbdb2f ("media: move videobuf2 to drivers/media/common") Fixes: 05439b1a ("[media] media: au0828 - convert to use videobuf2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/media/platform/atmel/atmel-isc.c:338:19: warning: symbol 'fmt_configs_list' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Philipp Zabel authored
Allow building this driver for other platforms under COMPILE_TEST. Suggested-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Philipp Zabel authored
Add support for the CodaHx4 VPU used on i.MX51. Decoding h.264, MPEG-4, and MPEG-2 video works, as well as encoding h.264. MPEG-4 encoding is not enabled, it currently produces visual artifacts. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix (bogus) sparse warning about uninited me_bits] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-