- 10 Mar, 2011 40 commits
-
-
Lars Ellenberg authored
If drbd used to have crypto digest algorithms configured, then is being unconfigured (but not unloaded), it frees the algorithms, but does not reset the config. If it then is reconfigured to use the very same algorithm, it "forgot" to re-allocate the algorithms, thinking that the config has not changed in that aspect. It will then Oops on the first attempt to actually use those algorithms. Fix this by resetting the config to defaults after cleanup. Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
We must not call it directly from resync_finished, as we may be in either receiver or worker context there. Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Long time ago, we had paranoia code in the bitmap that allocated one extra word, assigned a magic value, and checked on every occasion that the magic value was still unchanged. That debug code is unused, the extra long word complicates code a bit. Get rid of it. Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
When we set or clear bits in a bitmap page, also set a flag in the page->private pointer. This allows us to skip writes of unchanged pages. Signed-off-by:
-
Lars Ellenberg authored
Our on-disk bitmap is a little endian bitstream. Up to now, we have stored the in-core copy of that in native endian, applying byte order conversion when necessary. Instead, keep the bitmap pages little endian, as they are read from disk, and use the generic_*_le_bit family of functions. Signed-off-by:
-
Lars Ellenberg authored
We trusted the on-disk bitmap to have unused bits cleared. In case that is not true for whatever reason, and we take a code path where the unused bits don't get cleared elsewhere (bm_clear_surplus is not called), we may miscount the bits, and get confused during resync, waiting for bits to get cleared that we don't even use: the resync process would not terminate. Fix this by masking out unused bits in __bm_count_bits. Signed-off-by:
-
Andreas Gruenbacher authored
The old name is confusing: the function does not increment anything. Also rename _inc_ap_bio_cond to inc_ap_bio_cond: there is no need for an underscore. Finally, make it clear that these functions return boolean values. Signed-off-by:
-
Andreas Gruenbacher authored
I guess bitmap I/O errors are supposed to cause drbd_determin_dev_size to return dev_size_error. Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Warning: comparison between ‘enum drbd_ret_code’ and ‘enum drbd_state_rv’ Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
The FAULT_ACTIVE macro just wraps the drbd_insert_fault macro for no apparent reason. Signed-off-by:
-
Andreas Gruenbacher authored
This macro doesn't save much code, but makes things a lot harder to read. Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Reviewed-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Lars Ellenberg authored
commit e2041475e6ddb081734d161f6421977323f5a9b9 drbd: Starting with protocol 96 we can allow app-IO while receiving the bitmap Contained a bad chunk that tried to optimize away drbd barriers during bitmap exchange, but accidentally dropped them for normal mode as well. Impact: depending on activity log size and access pattern, activity log extents may not be recycled in time, causeing IO to block indefinetely. Fix: skip drbd barriers only if there is no connection to send them on, or the request being completed has not been on the network at all. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
As the network connection can be lost at any time, a --force option for disconnect is just a matter of completeness. Signed-off-by:
-
Lars Ellenberg authored
In case we ever should add an other packet type, we must not reuse 27, as that currently used for "empty" return code only replies. Document it as such. Signed-off-by:
-
Lars Ellenberg authored
Make sure we start with clean buffers to not accidentally send garbage back to userspace. Note: has not been observed; but just in case. Signed-off-by:
-
Lars Ellenberg authored
There still exists a (theoretical) race on module unload, where /proc/drbd may still exist, but the netlink callback has been unregistered already, allowing drbdsetup to shout without listeners, and get no reply. Reorder remove_proc_entry and unregister of netlink callback. drbdsetup first checks for existence of the proc entry, and if that is missing, won't even try to contact the module. Signed-off-by:
-
Lars Ellenberg authored
If someone holds /proc/drbd open, previously rmmod would "succeed" in starting the unload, but then block on remove_proc_entry, leading to a situation where the lsmod does not show drbd anymore, but /proc/drbd being still there (but no longer accessible). I'd rather have rmmod fail up front in this case. Signed-off-by:
-
Philipp Reisner authored
Given low-enough network bandwidth combined with a IO pattern that hammers onto a single RS-extent, side-stepping might be necessary for much longer times. Changed the code to print a single informal message after 20 seconds, but it keeps on stepping aside forever. Signed-off-by:
-
Philipp Reisner authored
This patch is acutally a necessary addendum to the patch "fix for spurious full sync (becoming sync target looked like invalidate)" Signed-off-by:
-
Philipp Reisner authored
* C_STARTING_SYNC_S, C_STARTING_SYNC_T In these states the bitmap gets written to disk. Locking out of app-IO is done by using the drbd_queue_bitmap_io() and drbd_bitmap_io() functions these days. It is no longer necessary to lock out app-IO based on the connection state. App-IO that may come in after the BITMAP_IO flag got cleared before the state transition to C_SYNC_(SOURCE|TARGET) does not get mirrored, sets a bit in the local bitmap, that is already set, therefore changes nothing. * C_WF_BITMAP_S In this state we send updates (P_OUT_OF_SYNC packets). With that we make sure they have the same number of bits when going into the C_SYNC_(SOURCE|TARGET) connection state. * C_UNCONNECTED: The receiver starts, no need to lock out IO. * C_DISCONNECTING: in drbd_disconnect() we had a wait_event() to wait until ap_bio_cnt reaches 0. Removed that. * C_TIMEOUT, C_BROKEN_PIPE, C_NETWORK_FAILURE C_PROTOCOL_ERROR, C_TEAR_DOWN: Same as C_DISCONNECTING * C_WF_REPORT_PARAMS: IO still possible since that is still like C_WF_CONNECTION. And we do not need to send barriers in C_WF_BITMAP_S connection state. Allow concurrent accesses to the bitmap when receiving the bitmap. Everything gets ORed anyways. A drbd_free_tl_hash() is in after_state_chg_work(). At that point all the work items of the last connections must have been processed. Introduced a call to drbd_free_tl_hash() into drbd_free_mdev() for paranoia reasons. Signed-off-by:
-
Philipp Reisner authored
The relevant change is that the state change to C_FW_BITMAP_S should implicitly change pdsk to C_CONSISTENT. (Think of it as C_OUTDATED, only without the guarantee that the peer has the outdated written to its meta data) At that opportunity I restructured the switch statement so that it gets evaluated every time. (Has declarative character) Signed-off-by:
-
