- 02 Oct, 2018 21 commits
-
-
Miquel Raynal authored
Enable the newly introduced Marvell SEI driver for the 64-bit Marvell EBU platforms. Suggested-by: Haim Boot <hayim@marvell.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Miquel Raynal authored
This is a cascaded interrupt controller in the AP806 GIC that collapses SEIs (System Error Interrupt) coming from the AP and the CPs (through the ICU). The SEI handles up to 64 interrupts. The first 21 interrupts are wired from the AP. The next 43 interrupts are from the CPs and are triggered through MSI messages. To handle this complexity, the driver has to declare to the upper layer: one IRQ domain for the wired interrupts, one IRQ domain for the MSIs; and acts as a MSI controller ('parent') by declaring an MSI domain. Suggested-by: Haim Boot <hayim@marvell.com> Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Miquel Raynal authored
The ICU can handle several type of interrupt, each of them being handled differently on AP side. On CP side, the ICU should be able to make the distinction between each interrupt group by pointing to the right parent. This is done through the introduction of new bindings, presenting the ICU node as the parent of multiple ICU sub-nodes, each of them being an interrupt type with a different interrupt parent. ICU interrupt 'clients' now directly point to the right sub-node, avoiding the need for the extra ICU_GRP_* parameter. ICU subnodes are probed automatically with devm_platform_populate(). If the node as no child, the probe function for NSRs will still be called 'manually' in order to preserve backward compatibility with DT using the old binding. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Miquel Raynal authored
NSR (non-secure interrupts) are handled in the ICU driver like if there was only this type of interrupt in the ICU. Change this behavior to prepare the introduction of SEI (System Error Interrupts) support by moving the NSR code in a separate function. This is done under the form of a 'probe' function to ease future migration to NSR/SEI being platform devices part of the ICU. The 'icu' structure is passed as driver data and not as a parameter for the same reason. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Miquel Raynal authored
Rewrite a small section to clarify the reset operation of interrupts already configured by ATF that we want to handle in the driver. This will simplify the introduction of System Error Interrupts support. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Miquel Raynal authored
The irq_domain structure has an host_data pointer that just stores private data. It is meant to not be touched by the IRQ core. However, when it comes to MSI, the MSI layer adds its own private data there with a structure that also has a host_data pointer. Because this IRQ domain is an MSI domain, to access private data we should do a d->host_data->host_data, also wrapped as 'platform_msi_get_host_data()'. This bug was lying there silently because the 'icu' structure retrieved this way was just called by dev_err(), only producing a '(NULL device *):' output on the console. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Miquel Raynal authored
ICU size in CP110 is not 0x10 but at least 0x440 bytes long (from the specification). Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
platform_msi_create_device_domain() always creates a revmap-based irqdomain, which has the drawback of requiring the number of MSIs that can be allocated ahead of time. This is not always possible, and we sometimes need to use a tree-based irqdomain instead. Add a new platform_msi_create_device_tree_domain() helper to that effect. Reported-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Biju Das authored
Document RZ/G1N (R8A7744) SoC bindings. Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Geert Uytterhoeven authored
Document support for the Interrupt Controller for External Devices (INTC-EX) in the Renesas E3 (r8a77990) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Lina Iyer authored
The PDC irqchp can convert a falling edge or level low interrupt to a rising edge or level high interrupt at the GIC. We just need to setup the GIC correctly. Set up the interrupt type for the IRQ_TYPE_EDGE_BOTH as IRQ_TYPE_EDGE_RISING at the GIC. Fixes: f55c73ae ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs") Reported-by: Evan Green <evgreen@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
If the LPI tables have been reserved with the EFI reservation mechanism, we assume that these tables are safe to use even when we find the redistributors to have LPIs enabled at boot time, meaning that kexec can now work with GICv3. You're welcome. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
Upon enabling a redistributor, let's register the allocated tables with the EFI table that tracks the memory reservations. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
If booting with LPIs enabled, all the redistributors must have the exact same property table. No ifs, no buts. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
If using a kdump kernel, and that we cannot disable LPIs to install our own tables, let's switch to using the already allocated tables. This means that we'll change some of the initial kernel's memory, but at least we'll be able to have LPIs in this secondary kernel. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
In order to cope with kexec and GICv3, let's try and spot when we're booting with LPIs already enabled, and the tables already programmed into the redistributors. This code is currently guarded by a predicate that is always false, meaning this is not functionnal just yet. Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
We're currently only tracking the page allocated to contain the property table by its struct page. In the future, it is going to be convenient to track both PA and VA for that page instead. Let's do that. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
Pending tables for the redistributors are currently allocated one at a time as each CPU boots. This is causing some grief for Linux/RT (allocation from within a CPU hotplug notifier is frown upon). Let's move this allocation to take place at init time, when we only have a single CPU. It means we're allocating memory for CPUs that are not online yet, but most system will boot all of their CPUs anyway, so that's not completely wasted. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
As we're going to reuse some pre-allocated memory for the property table, split out the zeroing of that table into a separate function for later use. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
LPI_PENDING_SZ is always used in conjunction with a max(), which doesn't make much sense, since we're guaranteed that LPI_PENDING_SZ is already aligned to 64K. Let's remove it. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
We currently initialize the LPIs (and the ITS) fairly early, even before the SMP support and the CPU interface. This is a bit odd (as LPIs are not exactly crutial for the early boot process), and is going to cause issues when reorganizing the probing code. Let's move this initialization later. Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
- 26 Sep, 2018 3 commits
-
-
Ard Biesheuvel authored
Add kernel plumbing to reserve memory regions persistently on a EFI system by adding entries to the MEMRESERVE linked list. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
Ard Biesheuvel authored
Installing UEFI configuration tables can only be done before calling ExitBootServices(), so if we want to use the new MEMRESRVE config table from the kernel proper, we need to install a dummy entry from the stub. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
Ard Biesheuvel authored
In order to allow the OS to reserve memory persistently across a kexec, introduce a Linux-specific UEFI configuration table that points to the head of a linked list in memory, allowing each kernel to add list items describing memory regions that the next kernel should treat as reserved. This is useful, e.g., for GICv3 based ARM systems that cannot disable DMA access to the LPI tables, forcing them to reuse the same memory region again after a kexec reboot. Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
- 10 Sep, 2018 1 commit
-
-
Linus Torvalds authored
-
- 09 Sep, 2018 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Prevent multiplication result truncation on 32bit. Introduced with the early timestamp reworrk. - Ensure microcode revision storage to be consistent under all circumstances - Prevent write tearing of PTEs - Prevent confusion of user and kernel reegisters when dumping fatal signals verbosely - Make an error return value in a failure path of the vector allocation negative. Returning EINVAL might the caller assume success and causes further wreckage. - A trivial kernel doc warning fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use WRITE_ONCE() when setting PTEs x86/apic/vector: Make error return value negative x86/process: Don't mix user/kernel regs in 64bit __show_regs() x86/tsc: Prevent result truncation on 32bit x86: Fix kernel-doc atomic.h warnings x86/microcode: Update the new microcode revision unconditionally x86/microcode: Make sure boot_cpu_data.microcode is up-to-date
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timekeeping fixes from Thomas Gleixner: "Two fixes for timekeeping: - Revert to the previous kthread based update, which is unfortunately required due to lock ordering issues. The removal caused boot failures on old Core2 machines. Add a proper comment why the thread needs to stay to prevent accidental removal in the future. - Fix a silly typo in a function declaration" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Revert "Remove kthread" timekeeping: Fix declaration of read_persistent_wall_and_boot_offset()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irqchip fix from Thomas Gleixner: "A single fix to prevent allocating excessive memory in the GIC/ITS driver. While the subject of the patch might suggest otherwise this is a real fix as some SoCs exceed the memory allocation limits and fail to boot" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Cap lpi_id_bits to reduce memory footprint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull cpu hotplug fixes from Thomas Gleixner: "Two fixes for the hotplug state machine code: - Move the misplaces smb() in the hotplug thread function to the proper place, otherwise a half update control struct could be observed - Prevent state corruption on error rollback, which causes the state to advance by one and as a consequence skip it in the bringup sequence" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Prevent state corruption on error rollback cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull random driver fix from Ted Ts'o: "Fix things so the choice of whether or not to trust RDRAND to initialize the CRNG is configurable via the boot option random.trust_cpu={on,off}" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: make CPU trust a boot parameter
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - make setlocalversion more robust about -dirty check - loosen the pkg-config requirement for Kconfig - change missing depmod to a warning from an error - warn modules_install when System.map is missing * tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: modules_install: warn when missing System.map file kbuild: make missing $DEPMOD a Warning instead of an Error kconfig: do not require pkg-config on make {menu,n}config kconfig: remove a spurious self-assignment scripts/setlocalversion: git: Make -dirty check more robust
-
Randy Dunlap authored
If there is no System.map file for "make modules_install", scripts/depmod.sh will silently exit with success, having done nothing. Since this is an unexpected situation, change it to report a Warning for the missing file. The behavior is not changed except for the Warning message. The (previous) silent success and new Warning can be reproduced by: $ make mrproper; make defconfig $ make modules; make modules_install and since System.map is produced by "make vmlinux", the steps above omit producing the System.map file. Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
- 08 Sep, 2018 6 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "ARM: - Fix a VFP corruption in 32-bit guest - Add missing cache invalidation for CoW pages - Two small cleanups s390: - Fallout from the hugetlbfs support: pfmf interpretion and locking - VSIE: fix keywrapping for nested guests PPC: - Fix a bug where pages might not get marked dirty, causing guest memory corruption on migration - Fix a bug causing reads from guest memory to use the wrong guest real address for very large HPT guests (>256G of memory), leading to failures in instruction emulation. x86: - Fix out of bound access from malicious pv ipi hypercalls (introduced in rc1) - Fix delivery of pending interrupts when entering a nested guest, preventing arbitrarily late injection - Sanitize kvm_stat output after destroying a guest - Fix infinite loop when emulating a nested guest page fault and improve the surrounding emulation code - Two minor cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) KVM: LAPIC: Fix pv ipis out-of-bounds access KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2 arm64: KVM: Remove pgd_lock KVM: Remove obsolete kvm_unmap_hva notifier backend arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting KVM: s390: vsie: copy wrapping keys to right place KVM: s390: Fix pfmf and conditional skey emulation tools/kvm_stat: re-animate display of dead guests tools/kvm_stat: indicate dead guests as such tools/kvm_stat: handle guest removals more gracefully tools/kvm_stat: don't reset stats when setting PID filter for debugfs tools/kvm_stat: fix updates for dead guests tools/kvm_stat: fix handling of invalid paths in debugfs provider tools/kvm_stat: fix python3 issues KVM: x86: Unexport x86_emulate_instruction() KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction() KVM: x86: Do not re-{try,execute} after failed emulation in L2 KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few more fixes who have trickled in: - MMC bus width fixup for some Allwinner platforms - Fix for NULL deref in ti-aemif when no platform data is passed in - Fix div by 0 in SCMI code - Add a missing module alias in a new RPi driver" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: memory: ti-aemif: fix a potential NULL-pointer dereference firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero hwmon: rpi: add module alias to raspberrypi-hwmon arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
-
Olof Johansson authored
Merge tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 4.19 Just one fix for H6 mmc on the Pine H64: the mmc bus width was missing from the device tree. This was added in 4.19-rc1. * tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: dts: h6: fix Pine H64 MMC bus width Signed-off-by: Olof Johansson <olof@lixom.net>
-
Nadav Amit authored
When page-table entries are set, the compiler might optimize their assignment by using multiple instructions to set the PTE. This might turn into a security hazard if the user somehow manages to use the interim PTE. L1TF does not make our lives easier, making even an interim non-present PTE a security hazard. Using WRITE_ONCE() to set PTEs and friends should prevent this potential security hazard. I skimmed the differences in the binary with and without this patch. The differences are (obviously) greater when CONFIG_PARAVIRT=n as more code optimizations are possible. For better and worse, the impact on the binary with this patch is pretty small. Skimming the code did not cause anything to jump out as a security hazard, but it seems that at least move_soft_dirty_pte() caused set_pte_at() to use multiple writes. Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180902181451.80520-1-namit@vmware.com
-
Thomas Gleixner authored
activate_managed() returns EINVAL instead of -EINVAL in case of error. While this is unlikely to happen, the positive return value would cause further malfunction at the call site. Fixes: 2db1f959 ("x86/vector: Handle managed interrupts proper") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: - bugfixes for uniphier, i801, and xiic drivers - ID removal (never produced) for imx - one MAINTAINER addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: xiic: Record xilinx i2c with Zynq fragment i2c: xiic: Make the start and the byte count write atomic i2c: i801: fix DNV's SMBCTRL register offset i2c: imx-lpi2c: Remove mx8dv compatible entry dt-bindings: imx-lpi2c: Remove mx8dv compatible entry i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP i2c: uniphier: issue STOP only for last message or I2C_M_STOP
-
- 07 Sep, 2018 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC updates from Vineet Gupta: - Fix for atomic_fetch_#op [Will Deacon] - Enable per device IOC [Eugeniy Paltsev] - Remove redundant gcc version checks [Masahiro Yamada] - Miscll platform config/DT updates [Alexey Brodkin] * tag 'arc-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: don't check for HIGHMEM pages in arch_dma_alloc ARC: IOC: panic if both IOC and ZONE_HIGHMEM enabled ARC: dma [IOC] Enable per device io coherency ARC: dma [IOC]: mark DMA devices connected as dma-coherent ARC: atomics: unbork atomic_fetch_##op() arc: remove redundant GCC version checks ARC: sort Kconfig ARC: cleanup show_faulting_vma() ARC: [plat-axs*]: Enable SWAP ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernel ARC: configs: cleanup
-
David Howells authored
Fix the cell specification mechanism to allow cells to be pre-created without having to specify at least one address (the addresses will be upcalled for). This allows the cell information preload service to avoid the need to issue loads of DNS lookups during boot to get the addresses for each cell (500+ lookups for the 'standard' cell list[*]). The lookups can be done later as each cell is accessed through the filesystem. Also remove the print statement that prints a line every time a new cell is added. [*] There are 144 cells in the list. Each cell is first looked up for an SRV record, and if that fails, for an AFSDB record. These get a list of server names, each of which then has to be looked up to get the addresses for that server. E.g.: dig srv _afs3-vlserver._udp.grand.central.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-