- 10 Sep, 2020 3 commits
-
-
Christoph Hellwig authored
Switch to use bdev_check_media_change instead of check_disk_change and call floppy_revalidate manually. Given that floppy_revalidate only deals with media change events, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
The Amiga floppy driver does not have a ->revalidate_disk method, so it can just use bdev_check_media_change without any additional changes. Signed-off-by:
-
Christoph Hellwig authored
Like check_disk_changed, except that it does not call ->revalidate_disk but leaves that to the caller. Signed-off-by:
-
- 08 Sep, 2020 5 commits
-
-
Christoph Hellwig authored
Switch to the naming used by the other entries so that we can use the QUEUE_RW_ENTRY helper. Signed-off-by:
-
Christoph Hellwig authored
Add two helpers macros to avoid boilerplate code for the queue sysfs entries. Signed-off-by:
-
Wang Hai authored
The sparse tool complains as follows: kernel/trace/blktrace.c:796:5: warning: symbol 'blk_trace_bio_get_cgid' was not declared. Should it be static? This function is not used outside of blktrace.c, so this commit marks it static. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Baolin Wang authored
Now we usually free the hctx->sched_data by e->type->ops.exit_hctx(), and no users will use blk_mq_sched_free_hctx_data() function. Remove it. Signed-off-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by:
-
Jan Kara authored
Discarding blocks and buffers under a mounted filesystem is hardly anything admin wants to do. Usually it will confuse the filesystem and sometimes the loss of buffer_head state (including b_private field) can even cause crashes like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 4 PID: 203778 Comm: jbd2/dm-3-8 Kdump: loaded Tainted: G O --------- - - 4.18.0-147.5.0.5.h126.eulerosv2r9.x86_64 #1 Hardware name: Huawei RH2288H V3/BC11HGSA0, BIOS 1.57 08/11/2015 RIP: 0010:jbd2_journal_grab_journal_head+0x1b/0x40 [jbd2] ... Call Trace: __jbd2_journal_insert_checkpoint+0x23/0x70 [jbd2] jbd2_journal_commit_transaction+0x155f/0x1b60 [jbd2] kjournald2+0xbd/0x270 [jbd2] So if we don't have block device open with O_EXCL already, claim the block device while we truncate buffer cache. This makes sure any exclusive block device user (such as filesystem) cannot operate on the device while we are discarding buffer cache. Reported-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
- 07 Sep, 2020 1 commit
-
-
Jan Kara authored
If block_write_full_page() is called for a page that is beyond current inode size, it will truncate page buffers for the page and return 0. This logic has been added in 2.5.62 in commit 81eb6906 ("fix ext3 BUG due to race with truncate") in history.git tree to fix a problem with ext3 in data=ordered mode. This particular problem doesn't exist anymore because ext3 is long gone and ext4 handles ordered data differently. Also normally buffers are invalidated by truncate code and there's no need to specially handle this in ->writepage() code. This invalidation of page buffers in block_write_full_page() is causing issues to filesystems (e.g. ext4 or ocfs2) when block device is shrunk under filesystem's hands and metadata buffers get discarded while being tracked by the journalling layer. Although it is obviously "not supported" it can cause kernel crashes like: [ 7986.689400] BUG: unable to handle kernel NULL pointer dereference at +0000000000000008 [ 7986.697197] PGD 0 P4D 0 [ 7986.699724] Oops: 0002 [#1] SMP PTI [ 7986.703200] CPU: 4 PID: 203778 Comm: jbd2/dm-3-8 Kdump: loaded Tainted: G +O --------- - - 4.18.0-147.5.0.5.h126.eulerosv2r9.x86_64 #1 [ 7986.716438] Hardware name: Huawei RH2288H V3/BC11HGSA0, BIOS 1.57 08/11/2015 [ 7986.723462] RIP: 0010:jbd2_journal_grab_journal_head+0x1b/0x40 [jbd2] ... [ 7986.810150] Call Trace: [ 7986.812595] __jbd2_journal_insert_checkpoint+0x23/0x70 [jbd2] [ 7986.818408] jbd2_journal_commit_transaction+0x155f/0x1b60 [jbd2] [ 7986.836467] kjournald2+0xbd/0x270 [jbd2] which is not great. The crash happens because bh->b_private is suddently NULL although BH_JBD flag is still set (this is because block_invalidatepage() cleared BH_Mapped flag and subsequent bh lookup found buffer without BH_Mapped set, called init_page_buffers() which has rewritten bh->b_private). So just remove the invalidation in block_write_full_page(). Note that the buffer cache invalidation when block device changes size is already careful to avoid similar problems by using invalidate_mapping_pages() which skips busy buffers so it was only this odd block_write_full_page() behavior that could tear down bdev buffers under filesystem's hands. Reported-by:
-
- 03 Sep, 2020 10 commits
-
-
Kashyap Desai authored
High CPU utilization on "native_queued_spin_lock_slowpath" due to lock contention is possible for mq-deadline and bfq IO schedulers when nr_hw_queues is more than one. It is because kblockd work queue can submit IO from all online CPUs (through blk_mq_run_hw_queues()) even though only one hctx has pending commands. The elevator callback .has_work for mq-deadline and bfq scheduler considers pending work if there are any IOs on request queue but it does not account hctx context. Add a per-hctx 'elevator_queued' count to the hctx to avoid triggering the elevator even though there are no requests queued. [jpg: Relocated atomic_dec() in dd_dispatch_request(), update commit message per Kashyap] Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
John Garry <john.garry@huawei.com> Tested-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
John Garry authored
For when using a shared sbitmap, no longer should the number of active request queues per hctx be relied on for when judging how to share the tag bitmap. Instead maintain the number of active request queues per tag_set, and make the judgement based on that. Originally-from: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
-
John Garry authored
The per-hctx nr_active value can no longer be used to fairly assign a share of tag depth per request queue for when using a shared sbitmap, as it does not consider that the tags are shared tags over all hctx's. For this case, record the nr_active_requests per request_queue, and make the judgement based on that value. Co-developed-with: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
-
John Garry authored
blk-mq.h and blk-mq-tag.h include on each other, which is less than ideal. Locate hctx_may_queue() to blk-mq.h, as it is not really tag specific code. In this way, we can drop the blk-mq-tag.h include of blk-mq.h Signed-off-by:
-
John Garry authored
Some SCSI HBAs (such as HPSA, megaraid, mpt3sas, hisi_sas_v3 ..) support multiple reply queues with single hostwide tags. In addition, these drivers want to use interrupt assignment in pci_alloc_irq_vectors(PCI_IRQ_AFFINITY). However, as discussed in [0], CPU hotplug may cause in-flight IO completion to not be serviced when an interrupt is shutdown. That problem is solved in commit bf0beec0 ("blk-mq: drain I/O when all CPUs in a hctx are offline"). However, to take advantage of that blk-mq feature, the HBA HW queuess are required to be mapped to that of the blk-mq hctx's; to do that, the HBA HW queues need to be exposed to the upper layer. In making that transition, the per-SCSI command request tags are no longer unique per Scsi host - they are just unique per hctx. As such, the HBA LLDD would have to generate this tag internally, which has a certain performance overhead. However another problem is that blk-mq assumes the host may accept (Scsi_host.can_queue * #hw queue) commands. In commit 6eb045e0 ("scsi: core: avoid host-wide host_busy counter for scsi_mq"), the Scsi host busy counter was removed, which would stop the LLDD being sent more than .can_queue commands; however, it should still be ensured that the block layer does not issue more than .can_queue commands to the Scsi host. To solve this problem, introduce a shared sbitmap per blk_mq_tag_set, which may be requested at init time. New flag BLK_MQ_F_TAG_HCTX_SHARED should be set when requesting the tagset to indicate whether the shared sbitmap should be used. Even when BLK_MQ_F_TAG_HCTX_SHARED is set, a full set of tags and requests are still allocated per hctx; the reason for this is that if tags and requests were only allocated for a single hctx - like hctx0 - it may break block drivers which expect a request be associated with a specific hctx, i.e. not always hctx0. This will introduce extra memory usage. This change is based on work originally from Ming Lei in [1] and from Bart's suggestion in [2]. [0] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/ [1] https://lore.kernel.org/linux-block/20190531022801.10003-1-ming.lei@redhat.com/ [2] https://lore.kernel.org/linux-block/ff77beff-5fd9-9f05-12b6-826922bace1f@huawei.com/T/#m3db0a602f095cbcbff27e9c884d6b4ae826144beSigned-off-by:
-
John Garry authored
Introduce pointers for the blk_mq_tags regular and reserved bitmap tags, with the goal of later being able to use a common shared tag bitmap across all HW contexts in a set. Signed-off-by:
-
John Garry authored
Pass hctx/tagset flags argument down to blk_mq_init_tags() and blk_mq_free_tags() for selective init/free. For now, make it include the alloc policy flag, which can be evaluated when needed (in blk_mq_init_tags()). Signed-off-by:
-
Hannes Reinecke authored
Since the tags are allocated in blk_mq_init_tags(), it's better practice to free in that same function upon error, rather than a callee which is to init the bitmap tags (blk_mq_init_tags()). [jpg: Split from an earlier patch with a new commit message] Signed-off-by:
-
Hannes Reinecke authored
The function does not set the depth, but rather transitions from shared to non-shared queues and vice versa. So rename it to blk_mq_update_tag_set_shared() to better reflect its purpose. [jpg: take out some unrelated changes in blk_mq_init_bitmap_tags()] Signed-off-by:
-
Ming Lei authored
BLK_MQ_F_TAG_SHARED actually means that tags is shared among request queues, all of which should belong to LUNs attached to same HBA. So rename it to make the point explicitly. [jpg: rebase a few times, add rnbd-clt.c change] Suggested-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
- 02 Sep, 2020 21 commits
-
-
Christoph Hellwig authored
Remove the now unused helper. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Song Liu <song@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
The nvdimm block driver abuse revalidate_disk in a strange way, and totally unrelated to what other drivers do. Simplify this by just calling nvdimm_revalidate_disk (which seems rather misnamed) from the probe routines, as the additional bdev size revalidation is pointless at this point, and remove the revalidate_disk methods given that it can only be triggered from add_disk, which is right before the manual calls. Signed-off-by:
-
Christoph Hellwig authored
Instead of calling revalidate_disk just do the work directly by calling sd_revalidate_disk, and revalidate_disk_size where needed. Signed-off-by:
-
Christoph Hellwig authored
Keep control in the NVMe driver instead of going through an indirect call back into ->revalidate_disk. Also reorder the function a bit to be easier to follow with the additional code. And now that we have removed all callers of revalidate_disk() in the nvme code, ->revalidate_disk is only called from the open code when first opening the device. Which is of course totally pointless as we have a valid size since the initial scan, and will get an updated view through the asynchronous notifiation everytime the size changes. Signed-off-by:
-
Christoph Hellwig authored
Only virtio_blk and xen-blkfront set the revalidate argument to true, and both do not implement the ->revalidate_disk method. So switch to the helper that just updates the size instead. Signed-off-by:
-
Christoph Hellwig authored
revalidate_disk is a relative awkward helper for driver use, as it first calls an optional driver method and then updates the block device size, while most callers either don't need the method call at all, or want to keep state between the caller and the called method. Add a revalidate_disk_size helper that just performs the update of the block device size from the gendisk one, and switch all drivers that do not implement ->revalidate_disk to use the new helper instead of revalidate_disk() Signed-off-by:
-
Christoph Hellwig authored
Replace bd_invalidate with a new BDEV_NEED_PART_SCAN flag in a bd_flags variable to better describe the condition. Signed-off-by:
-
Christoph Hellwig authored
bd_invalidated is set by check_disk_change or in add_disk to initiate a partition scan. Move it from check_disk_size_change which is called from both revalidate_disk() and bdev_disk_changed() to only the latter, as that is what is called from the block device open code (and nbd) to deal with the bd_invalidated event. revalidate_disk() on the other hand is mostly used to propagate a size update from the gendisk to the block device, which is entirely unrelated. Signed-off-by:
-
Christoph Hellwig authored
unlock_native_capacity is never called from check_disk_change(), and while revalidate_disk can be called from it, it can also be called from two other places at the moment. Signed-off-by:
-
Baolin Wang authored
Remove a duplicative condition to remove below cppcheck warnings: "warning: Redundant condition: sched_allow_merge. '!A || (A && B)' is equivalent to '!A || B' [redundantCondition]" Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Ritika Srivastava authored
If WRITE_ZERO/WRITE_SAME operation is not supported by the storage, blk_cloned_rq_check_limits() will return IO error which will cause device-mapper to fail the paths. Instead, if the queue limit is set to 0, return BLK_STS_NOTSUPP. BLK_STS_NOTSUPP will be ignored by device-mapper and will not fail the paths. Suggested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Ritika Srivastava <ritika.srivastava@oracle.com> Reviewed-by:
-
Ritika Srivastava authored
Replace returning legacy errno codes with blk_status_t in blk_cloned_rq_check_limits(). Signed-off-by:
-
Khazhismel Kumykov authored
CAP_SYS_ADMIN is too broad, and ionice fits into CAP_SYS_NICE's grouping. Retain CAP_SYS_ADMIN permission for backwards compatibility. Signed-off-by:
Khazhismel Kumykov <khazhy@google.com> Reviewed-by:
Serge Hallyn <serge@hallyn.com> Signed-off-by:
-
Tejun Heo authored
iocost went through significant internal changes. Update iocost_monitor.py accordingly. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
These are really cheap to collect and can be useful in debugging iocost behavior. Add them as debug stats for now. Signed-off-by:
-
Tejun Heo authored
Update and restore the inuse update tracepoints. Signed-off-by:
-
Tejun Heo authored
When an iocg accumulates too much vtime or gets deactivated, we throw away some vtime, which lowers the overall device utilization. As the exact amount which is being thrown away is known, we can compensate by accelerating the vrate accordingly so that the extra vtime generated in the current period matches what got lost. This significantly improves work conservation when involving high weight cgroups with intermittent and bursty IO patterns. Signed-off-by:
-
Tejun Heo authored
A low weight iocg can amass a large amount of debt, for example, when anonymous memory gets reclaimed aggressively. If the system has a lot of memory paired with a slow IO device, the debt can span multiple seconds or more. If there are no other subsequent IO issuers, the in-debt iocg may end up blocked paying its debt while the IO device is idle. This patch implements a mechanism to protect against such pathological cases. If the device has been sufficiently idle for a substantial amount of time, the debts are halved. The criteria are on the conservative side as we want to resolve the rare extreme cases without impacting regular operation by forgiving debts too readily. Signed-off-by:
-
Tejun Heo authored
Curently, iocost syncs the delay duration to the outstanding debt amount, which seemed enough to protect the system from anon memory hogs. However, that was mostly because the delay calcuation was using hweight_inuse which quickly converges towards zero under debt for delay duration calculation, often pusnishing debtors overly harshly for longer than deserved. The previous patch fixed the delay calcuation and now the protection against anonymous memory hogs isn't enough because the effect of delay is indirect and non-linear and a huge amount of future debt can accumulate abruptly while unthrottled. This patch implements delay hysteresis so that delay is decayed exponentially over time instead of getting cleared immediately as debt is paid off. While the overall behavior is similar to the blk-cgroup implementation used by blk-iolatency, a lot of the details are different and due to the empirical nature of the mechanism, it's challenging to adapt the mechanism for one controller without negatively impacting the other. As the delay is gradually decayed now, there's no point in running it from its own hrtimer. Periodic updates are now performed from ioc_timer_fn() and the dedicated hrtimer is removed. Signed-off-by:
-
Tejun Heo authored
Debt handling had several issues. * How much inuse a debtor carries wasn't clearly defined. inuse would be driven down over time from not issuing IOs but it'd be better to clamp it to minimum immediately once in debt. * How much can be paid off was determined by hweight_inuse. As inuse was driven down, the payment amount would fall together regardless of the debtor's active weight. This means that the debtors were punished harshly. * ioc_rqos_merge() wasn't calling blkcg_schedule_throttle() after iocg_kick_delay(). This patch revamps debt handling so that * Debt handling owns inuse for iocgs in debt and keeps them at zero. * Payment amount is determined by hweight_active. This is more deterministic and safer than hweight_inuse but still far from ideal in that it doesn't factor in possible donations from other iocgs for debt payments. This likely needs further improvements in the future. * iocg_rqos_merge() now calls blkcg_schedule_throttle() as necessary. Signed-off-by:
-
Tejun Heo authored
When the margin drops below the minimum on a donating iocg, donation is immediately canceled in full. There are a couple shortcomings with the current behavior. * It's abrupt. A small temporary budget deficit can lead to a wide swing in weight allocation and a large surplus. * It's open coded in the issue path but not implemented for the merge path. A series of merges at a low inuse can make the iocg incur debts and stall incorrectly. This patch reimplements in-period donation snapbacks so that * inuse adjustment and cost calculations are factored into adjust_inuse_and_calc_cost() which is called from both the issue and merge paths. * Snapbacks are more gradual. It occurs in quarter steps. * A snapback triggers if the margin goes below the low threshold and is lower than the budget at the time of the last adjustment. * For the above, __propagate_weights() stores the margin in iocg->saved_margin. Move iocg->last_inuse storing together into __propagate_weights() for consistency. * Full snapback is guaranteed when there are waiters. * With precise donation and gradual snapbacks, inuse adjustments are now a lot more effective and the value of scaling inuse on weight changes isn't clear. Removed inuse scaling from weight_update(). Signed-off-by:
-
