- 30 Apr, 2020 3 commits
-
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-next-2020-04-22 - remove non-upstream xen support bits (Christoph) - guest context shadow copy optimization (Yan) - guest context tracking for shadow skip optimization (Yan) Signed-off-by:
-
Zbigniew Kempczyński authored
Extend coverage of the blitter client by exercising conversion to and from tiled sources. In the process we perform spot checks to verify that the tiling/detiling is being applied correctly, along with position invariance of the tiling parameters. Signed-off-by:
Zbigniew Kempczyński <zbigniew.kempczynski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 29 Apr, 2020 10 commits
-
-
Chris Wilson authored
We reduced the clocks slowly after a boost event based on the observation that the smoothness of animations suffered. However, since reducing the evalution intervals, we should be able to respond to the rapidly fluctuating workload of a simple desktop animation and so restore the more aggressive downclocking. References: 2a8862d2 ("drm/i915: Reduce the RPS shock") Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-6-chris@chris-wilson.co.uk
-
Chris Wilson authored
We treat parking as a manual RPS timeout event, and downclock the GPU for the next unpark and batch execution. However, having restored the aggressive downclocking and observed that we have very light workloads whose only interaction is through the manual parking events, carry over the aggressive downclocking to the fake RPS events. References: 21abf0bf ("drm/i915/gt: Treat idling as a RPS downclock event") Signed-off-by:
-
Chris Wilson authored
As with the realisation for soft-rc6, we respond to idling the engines within microseconds, far faster than the response times for HW RC6 and RPS. Furthermore, our fast parking upon idle, prevents HW RPS from running for many desktop workloads, as the RPS evaluation intervals are on the order of tens of milliseconds, but the typical workload is just a couple of milliseconds, but yet we still need to determine the best frequency for user latency versus power. Recognising that the HW evaluation intervals are a poor fit, and that they were deprecated [in bspec at least] from gen10, start to wean ourselves off them and replace the EI with a timer and our accurate busy-stats. The principle benefit of manually evaluating RPS intervals is that we can be more responsive for better performance and powersaving for both spiky workloads and steady-state. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1698 Fixes: 98479ada ("drm/i915/gt: Treat idling as a RPS downclock event") Signed-off-by:
-
Chris Wilson authored
Use the new intel_rps.flags field to store whether or not interrupts are being used with RPS. Signed-off-by:
Andi Shyti <andi@etezian.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Pull the boolean intel_rps.enabled and intel_rps.active into a single flags field, in preparation for more. Signed-off-by:
-
Chris Wilson authored
In the near future, we will utilize the busy-stats on each engine to approximate the C0 cycles of each, and use that as an input to a manual RPS mechanism. That entails having busy-stats always enabled and so we can remove the enable/disable routines and simplify the pmu setup. As a consequence of always having the stats enabled, we can also show the current active time via sysfs/engine/xcs/active_time_ns. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We need to keep the default context state around to instantiate new contexts (aka golden rendercontext), and we also keep it pinned while the engine is active so that we can quickly reset a hanging context. However, the default contexts are large enough to merit keeping in swappable memory as opposed to kernel memory, so we store them inside shmemfs. Currently, we use the normal GEM objects to create the default context image, but we can throw away all but the shmemfs file. This greatly simplifies the tricky power management code which wants to run underneath the normal GT locking, and we definitely do not want to use any high level objects that may appear to recurse back into the GT. Though perhaps the primary advantage of the complex GEM object is that we aggressively cache the mapping, but here we are recreating the vm_area everytime time we unpark. At the worst, we add a lightweight cache, but first find a microbenchmark that is impacted. Having started to create some utility functions to make working with shmemfs objects easier, we can start putting them to wider use, where GEM objects are overkill, such as storing persistent error state. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429172429.6054-1-chris@chris-wilson.co.uk
-
Dan Carpenter authored
If intel_context_create() fails then it leads to an error pointer dereference. I shuffled things around to make error handling easier. Fixes: 1dd47b54 ("drm/i915: Add live selftests for indirect ctx batchbuffers") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Chris Wilson authored
Once the intel_context is closed, the GEM context may be freed and so the link from intel_context.gem_context is invalid. <3>[ 219.782944] BUG: KASAN: use-after-free in intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <3>[ 219.782996] Read of size 8 at addr ffff8881d7dff0b8 by task kworker/0:1/12 <4>[ 219.783052] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G U 5.7.0-rc2-g1f3ffd7683d54-kasan_118+ #1 <4>[ 219.783055] Hardware name: System manufacturer System Product Name/Z170 PRO GAMING, BIOS 3402 04/26/2017 <4>[ 219.783105] Workqueue: events heartbeat [i915] <4>[ 219.783109] Call Trace: <4>[ 219.783113] <IRQ> <4>[ 219.783119] dump_stack+0x96/0xdb <4>[ 219.783177] ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783182] print_address_description.constprop.6+0x16/0x310 <4>[ 219.783239] ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783295] ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783300] __kasan_report+0x137/0x190 <4>[ 219.783359] ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783366] kasan_report+0x32/0x50 <4>[ 219.783426] intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783481] execlists_reset+0x39c/0x13d0 [i915] <4>[ 219.783494] ? mark_held_locks+0x9e/0xe0 <4>[ 219.783546] ? execlists_hold+0xfc0/0xfc0 [i915] <4>[ 219.783551] ? lockdep_hardirqs_on+0x348/0x5f0 <4>[ 219.783557] ? _raw_spin_unlock_irqrestore+0x34/0x60 <4>[ 219.783606] ? execlists_submission_tasklet+0x118/0x3a0 [i915] <4>[ 219.783615] tasklet_action_common.isra.14+0x13b/0x410 <4>[ 219.783623] ? __do_softirq+0x1e4/0x9a7 <4>[ 219.783630] __do_softirq+0x226/0x9a7 <4>[ 219.783643] do_softirq_own_stack+0x2a/0x40 <4>[ 219.783647] </IRQ> <4>[ 219.783692] ? heartbeat+0x3e2/0x10f0 [i915] <4>[ 219.783696] do_softirq.part.13+0x49/0x50 <4>[ 219.783700] __local_bh_enable_ip+0x1a2/0x1e0 <4>[ 219.783748] heartbeat+0x409/0x10f0 [i915] <4>[ 219.783801] ? __live_idle_pulse+0x9f0/0x9f0 [i915] <4>[ 219.783806] ? lock_acquire+0x1ac/0x8a0 <4>[ 219.783811] ? process_one_work+0x811/0x1870 <4>[ 219.783827] ? rcu_read_lock_sched_held+0x9c/0xd0 <4>[ 219.783832] ? rcu_read_lock_bh_held+0xb0/0xb0 <4>[ 219.783836] ? _raw_spin_unlock_irq+0x1f/0x40 <4>[ 219.783845] process_one_work+0x8ca/0x1870 <4>[ 219.783848] ? lock_acquire+0x1ac/0x8a0 <4>[ 219.783852] ? worker_thread+0x1d0/0xb80 <4>[ 219.783864] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 <4>[ 219.783870] ? do_raw_spin_lock+0x129/0x290 <4>[ 219.783886] worker_thread+0x82/0xb80 <4>[ 219.783895] ? __kthread_parkme+0xaf/0x1b0 <4>[ 219.783902] ? process_one_work+0x1870/0x1870 <4>[ 219.783906] kthread+0x34e/0x420 <4>[ 219.783911] ? kthread_create_on_node+0xc0/0xc0 <4>[ 219.783918] ret_from_fork+0x3a/0x50 <3>[ 219.783950] Allocated by task 1264: <4>[ 219.783975] save_stack+0x19/0x40 <4>[ 219.783978] __kasan_kmalloc.constprop.3+0xa0/0xd0 <4>[ 219.784029] i915_gem_create_context+0xa2/0xab8 [i915] <4>[ 219.784081] i915_gem_context_create_ioctl+0x1fa/0x450 [i915] <4>[ 219.784085] drm_ioctl_kernel+0x1d8/0x270 <4>[ 219.784088] drm_ioctl+0x676/0x930 <4>[ 219.784092] ksys_ioctl+0xb7/0xe0 <4>[ 219.784096] __x64_sys_ioctl+0x6a/0xb0 <4>[ 219.784100] do_syscall_64+0x94/0x530 <4>[ 219.784103] entry_SYSCALL_64_after_hwframe+0x49/0xb3 <3>[ 219.784120] Freed by task 12: <4>[ 219.784141] save_stack+0x19/0x40 <4>[ 219.784145] __kasan_slab_free+0x130/0x180 <4>[ 219.784148] kmem_cache_free_bulk+0x1bd/0x500 <4>[ 219.784152] kfree_rcu_work+0x1d8/0x890 <4>[ 219.784155] process_one_work+0x8ca/0x1870 <4>[ 219.784158] worker_thread+0x82/0xb80 <4>[ 219.784162] kthread+0x34e/0x420 <4>[ 219.784165] ret_from_fork+0x3a/0x50 Fixes: 2e46a2a0 ("drm/i915: Use explicit flag to mark unreachable intel_context") Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by:
-
Nathan Chancellor authored
When building with clang + -Wuninitialized: drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:407:7: warning: variable 'rpcurupei' is uninitialized when used here [-Wuninitialized] rpcurupei, ^~~~~~~~~ drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:304:16: note: initialize the variable 'rpcurupei' to silence this warning u32 rpcurupei, rpcurup, rpprevup; ^ = 0 1 warning generated. rpupei is assigned twice; based on the second argument to intel_uncore_read, it seems this one should have been assigned to rpcurupei. Fixes: 9c878557 ("drm/i915/gt: Use the RPM config register to determine clk frequencies") Link: https://github.com/ClangBuiltLinux/linux/issues/1016Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
- 28 Apr, 2020 6 commits
-
-
Chris Wilson authored
Check that we do not submit two contexts into ELSP with the same CCID [upper portion of the descriptor]. References: https://gitlab.freedesktop.org/drm/intel/-/issues/1793Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
The presumption is that by using a circular counter that is twice as large as the maximum ELSP submission, we would never reuse the same CCID for two inflight contexts. However, if we continually preempt an active context such that it always remains inflight, it can be resubmitted with an arbitrary number of paired contexts. As each of its paired contexts will use a new CCID, eventually it will wrap and submit two ELSP with the same CCID. Rather than use a simple circular counter, switch over to a small bitmap of inflight ids so we can avoid reusing one that is still potentially active. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796 Fixes: 2935ed53 ("drm/i915: Remove logical HW ID") Signed-off-by:
-
Chris Wilson authored
The bspec is confusing on the nature of the upper 32bits of the LRC descriptor. Once upon a time, it said that it uses the upper 32b to decide if it should perform a lite-restore, and so we must ensure that each unique context submitted to HW is given a unique CCID [for the duration of it being on the HW]. Currently, this is achieved by using a small circular tag, and assigning every context submitted to HW a new id. However, this tag is being cleared on repinning an inflight context such that we end up re-using the 0 tag for multiple contexts. To avoid accidentally clearing the CCID in the upper 32bits of the LRC descriptor, split the descriptor into two dwords so we can update the GGTT address separately from the CCID. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796 Fixes: 2935ed53 ("drm/i915: Remove logical HW ID") Signed-off-by:
-
Matt Atwood authored
Reflect recent Bspec changes v2: fix whitespace, typo Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by:
Radhakrishna Sripada <Radhakrishna.sripada@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415193535.14597-1-matthew.s.atwood@intel.com
-
Chris Wilson authored
Give a small bump for our tolerance on comparing the expected vs measured clock ticks/time from 10% to 12.5% to accommodate a bad result on Sandybridge that was off by 10.3%. Hopefully, that is the worst we will see. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1802Signed-off-by:
-
Colin Ian King authored
There is a spelling mistaking in a pr_notice message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
- 27 Apr, 2020 6 commits
-
-
Matt Roper authored
The IRQ postinstall handling had open-coded pipe fault mask selection that never got updated for gen11. Switch it to use gen8_de_pipe_fault_mask() to ensure we don't miss updates for new platforms. Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: d506a65d ("drm/i915: Catch GTT fault errors for gen11+ planes") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424231423.4065231-1-matthew.d.roper@intel.comReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Chris Wilson authored
The bspec lists both the clock frequency and the effective interval. The interval corresponds to observed behaviour, so adjust the frequency to match. v2: Mika rightfully asked if we could measure the clock frequency from a selftest. Signed-off-by:
-
Chris Wilson authored
We see that if the HW doesn't actually sleep, the HW may eat the poison we set in its write-only HWSP during sanitize: intel_gt_resume.part.8: 0000:00:02.0 __gt_unpark: 0000:00:02.0 gt_sanitize: 0000:00:02.0 force:yes process_csb: 0000:00:02.0 vcs0: cs-irq head=5, tail=90 process_csb: 0000:00:02.0 vcs0: csb[0]: status=0x5a5a5a5a:0x5a5a5a5a assert_pending_valid: Nothing pending for promotion! The CS TAIL pointer should have been reset by reset_csb_pointers(), so in this case it is likely that we have read back from the CPU cache and so we must clflush our control over that page. In doing so, push the sanitisation to the start of the GT sequence so that our poisoning is assuredly before we start talking to the HW. References: https://gitlab.freedesktop.org/drm/intel/-/issues/1794Signed-off-by:
-
Chris Wilson authored
The hwsp_cacheline pointer from i915_request is very, very flimsy. The i915_request.timeline (and the hwsp_cacheline) are lost upon retiring (after an RCU grace). Therefore we need to confirm that once we have the right pointer for the cacheline, it is not in the process of being retired and disposed of before we attempt to acquire a reference to the cacheline. <3>[ 547.208237] BUG: KASAN: use-after-free in active_debug_hint+0x6a/0x70 [i915] <3>[ 547.208366] Read of size 8 at addr ffff88822a0d2710 by task gem_exec_parall/2536 <4>[ 547.208547] CPU: 3 PID: 2536 Comm: gem_exec_parall Tainted: G U 5.7.0-rc2-ged7a286b5d02d-kasan_117+ #1 <4>[ 547.208556] Hardware name: Dell Inc. XPS 13 9350/, BIOS 1.4.12 11/30/2016 <4>[ 547.208564] Call Trace: <4>[ 547.208579] dump_stack+0x96/0xdb <4>[ 547.208707] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.208719] print_address_description.constprop.6+0x16/0x310 <4>[ 547.208841] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.208963] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.208975] __kasan_report+0x137/0x190 <4>[ 547.209106] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.209127] kasan_report+0x32/0x50 <4>[ 547.209257] ? i915_gemfs_fini+0x40/0x40 [i915] <4>[ 547.209376] active_debug_hint+0x6a/0x70 [i915] <4>[ 547.209389] debug_print_object+0xa7/0x220 <4>[ 547.209405] ? lockdep_hardirqs_on+0x348/0x5f0 <4>[ 547.209426] debug_object_assert_init+0x297/0x430 <4>[ 547.209449] ? debug_object_free+0x360/0x360 <4>[ 547.209472] ? lock_acquire+0x1ac/0x8a0 <4>[ 547.209592] ? intel_timeline_read_hwsp+0x4f/0x840 [i915] <4>[ 547.209737] ? i915_active_acquire_if_busy+0x66/0x120 [i915] <4>[ 547.209861] i915_active_acquire_if_busy+0x66/0x120 [i915] <4>[ 547.209990] ? __live_alloc.isra.15+0xc0/0xc0 [i915] <4>[ 547.210005] ? rcu_read_lock_sched_held+0xd0/0xd0 <4>[ 547.210017] ? print_usage_bug+0x580/0x580 <4>[ 547.210153] intel_timeline_read_hwsp+0xbc/0x840 [i915] <4>[ 547.210284] __emit_semaphore_wait+0xd5/0x480 [i915] <4>[ 547.210415] ? i915_fence_get_timeline_name+0x110/0x110 [i915] <4>[ 547.210428] ? lockdep_hardirqs_on+0x348/0x5f0 <4>[ 547.210442] ? _raw_spin_unlock_irq+0x2a/0x40 <4>[ 547.210567] ? __await_execution.constprop.51+0x2e0/0x570 [i915] <4>[ 547.210706] i915_request_await_dma_fence+0x8f7/0xc70 [i915] Fixes: 85bedbf1 ("drm/i915/gt: Eliminate the trylock for reading a timeline's hwsp") Signed-off-by:
-
Chris Wilson authored
We evaluate *active, which is a pointer into execlists->inflight[] during dequeue to decide how long a preempt-timeout we need to apply. However, as soon as we do the submit_ports, the HW may send its ACK interrupt causing us to promote execlists->pending[] tp execlists->inflight[], overwriting the value of *active. We know *active is only stable until we submit (as we only submit when there is no pending promotion). [ 16.102328] BUG: KCSAN: data-race in execlists_dequeue+0x1449/0x1600 [i915] [ 16.102356] [ 16.102375] race at unknown origin, with read to 0xffff8881e9500488 of 8 bytes by task 429 on cpu 1: [ 16.102780] execlists_dequeue+0x1449/0x1600 [i915] [ 16.103160] __execlists_submission_tasklet+0x48/0x60 [i915] [ 16.103540] execlists_submit_request+0x38e/0x3c0 [i915] [ 16.103940] submit_notify+0x8f/0xc0 [i915] [ 16.104308] __i915_sw_fence_complete+0x61/0x420 [i915] [ 16.104683] i915_sw_fence_complete+0x58/0x80 [i915] [ 16.105054] i915_sw_fence_commit+0x16/0x20 [i915] [ 16.105457] __i915_request_queue+0x60/0x70 [i915] [ 16.105843] i915_gem_do_execbuffer+0x2d6b/0x4230 [i915] [ 16.106227] i915_gem_execbuffer2_ioctl+0x2b0/0x580 [i915] [ 16.106257] drm_ioctl_kernel+0xe9/0x130 [ 16.106279] drm_ioctl+0x27d/0x45e [ 16.106311] ksys_ioctl+0x89/0xb0 [ 16.106336] __x64_sys_ioctl+0x42/0x60 [ 16.106370] do_syscall_64+0x6e/0x2c0 [ 16.106397] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
-
Nick Desaulniers authored
The top level Makefile disables this warning. When building an i386_defconfig with Clang, this warning is triggered a whole bunch via includes of headers from perf. Link: https://github.com/ClangBuiltLinux/continuous-integration/pull/182Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
-
- 25 Apr, 2020 4 commits
-
-
Mika Kuoppala authored
Use indirect ctx bb to load cmd buffer control value from context image to avoid corruption. v2: add to lrc layout (Chris) v3: end to a cacheline (Chris) v4: add to lrc fixed (Chris) v5: value in offset+1 Testcase: igt/i915_selftest/gt_lrc Signed-off-by:
-
Mika Kuoppala authored
Indirect ctx batchbuffers are a hw feature of which batch can be run, by hardware, during context restoration stage. Driver can setup a batchbuffer and also an offset into the context image. When context image is marshalled from memory to registers, and when the offset from the start of context register state is equal of what driver pre-determined, batch will run. So one can manipulate context restoration process at cacheline granularity, given some limitations, as you need to have rudimentaries in place before you can run a batch. Add selftest which will write the ring start register to a canary spot. This will test that hardware will run a batchbuffer for the context in question. v2: request wait fix, naming (Chris) v3: test order (Chris) v4: rebase Signed-off-by:
-
Mika Kuoppala authored
Restoration of a previous timestamp can collide with updating the timestamp, causing a value corruption. Combat this issue by using indirect ctx bb to modify the context image during restoring process. We can preload value into scratch register. From which we then do the actual write with LRR. LRR is faster and thus less error prone as probability of race drops. v2: tidying (Chris) v3: lrr for all engines v4: grp v5: reg bit v6: wa_bb_offset, virtual engines (Chris) References: HSDES#16010904313 Testcase: igt/i915_selftest/gt_lrc Suggested-by:
Joseph Koston <joseph.koston@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Mika Kuoppala authored
General purpose registers are per engine and in a fixed location. Add to live_lrc_fixed. Signed-off-by:
-
- 24 Apr, 2020 11 commits
-
-
Chris Wilson authored
We only hold the active spinlock while dumping the error state, and this does not prevent another thread from retiring the request -- as it is quite possible that despite us capturing the current state, the GPU has completed the request. As such, it is dangerous to dereference state below the request as it may already be freed, and the simplest way to avoid the danger is not include it in the error state. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1788Signed-off-by:
-
Chris Wilson authored
For many configuration details within RC6 and RPS we are programming intervals for the internal clocks. From gen11, these clocks are configuration via the RPM_CONFIG and so for convenience, we would like to convert to/from more natural units (ns). Signed-off-by:
-
Chris Wilson authored
Add tracek to the RPS events (interrupts, worker, enabling, threshold selection, frequency setting), so that if we have to debug reticent HW we have some traces to start from. Signed-off-by:
-
Chris Wilson authored
The RPS DOWN_TIMEOUT interrupt is signaled after a period of rc6, and upon receipt of that interrupt we reprogram the GPU clocks down to the next idle notch [to help convserve power during rc6]. However, on execlists, we benefit from soft-rc6 immediately parking the GPU and setting idle frequencies upon idling [within a jiffie], and here the interrupt prevents us from restarting from our last frequency. In the process, we can simply opt for a static pm_events mask and rely on the enable/disable interrupts to flush the worker on parking. This will reduce the amount of oscillation observed during steady workloads with microsleeps, as each time the rc6 timeout occurs we immediately follow with a waitboost for a dropped frame. Signed-off-by:
-
Ville Syrjälä authored
Split some overly long lines. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com>
-
Ville Syrjälä authored
Relocate a bunch of DDI specific code from intel_dp.c to intel_ddi.c by introducing a .set_idle_link_train() vfunc. Signed-off-by:
-
Ville Syrjälä authored
Sort out some of the mess between intel_ddi.c intel_dp.c by introducing a .set_signal_levels() vfunc. Signed-off-by:
-
Ville Syrjälä authored
Sort out some of the mess between intel_ddi.c intel_dp.c by introducing a .set_link_train() vfunc. Signed-off-by:
-
Ville Syrjälä authored
Change intel_{gmch,pch}_panel_fitting() to return a normal error vs. success int. We'll need this later to validate that the margin properties aren't misconfigured. Signed-off-by:Manasi Navare <manasi.d.navare@intel.com>
-
Ville Syrjälä authored
Pass the entire connector state to intel_{gmch,pch}_panel_fitting(). For now we just need to get at .scaling_mode but in the future we'll want access to the margin properties as well. v2: Deal with intel_dp_ycbcr420_config() Signed-off-by: -
Ville Syrjälä authored
Follow the new naming convention and call the crtc state "crtc_state", and while at it drop the redundant crtc argument. Signed-off-by:
-
