- 18 Jun, 2010 40 commits
-
-
Scott Kidder authored
Fixed issues found by checkpatch.pl including adding KERN_ facility levels to printk() calls and C99 comments. Signed-off-by:
Scott Kidder <scott.kidder11@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Matti Lammi authored
Nothing special really, just a small fix. Signed-off-by:
Matti Lammi <matti.lammi@gmail.com> Signed-off-by:
-
Dan Carpenter authored
wrq->name is only 16 characters long but "IEEE 802.11-MIMO" is 16 characters + a NULL character, so it's too long. This patch changes it to "IEEE 802.11abgn". Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Joe Perches authored
On Mon, 2010-06-07 at 12:02 -0700, Luis R. Rodriguez wrote: > this driver is unmaintained and its only purpose is as a > source of documentation for developers working on ar9170 and carl9170. > Once carl9170 gets 11n support and merged upstream then this driver > can be removed. Then the TODO file should be updated. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Scott Kidder authored
This is a patch to zdusb.c that fixes whitespace, C99 comment, and other style issues found by the checkpatch.pl tool Signed-off-by:
-
Dan Carpenter authored
This doesn't change the behavior. It just silences a sparse warning. drivers/staging/wlan-ng/hfa384x_usb.c:2810:62: warning: dubious: !x | !y The point of the bitwise OR is so that a logical OR could short circuit the second call to test_and_set_bit(). Signed-off-by:
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
Some errors crept in due to a previous patch that I missed. This fixes them up so the driver continues to build, sorry about that. Signed-off-by: -
Karl Relton authored
Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by:
Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by:
-
Jiri Kosina authored
Current linux kernel has GENERIC_HDLC_VERSION equal to 4, no need to have dead code in-kernel which was there for ancient kernel versions. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
Remove all code which is dead for in-kernel driver due to being ifdefed by LINUX_VERSION_CODE. While at it, also remove surrounding code which is commented out, or '#if 1' nops. Signed-off-by:
-
Jiri Kosina authored
Remove all code which is dead for in-kernel driver due to being ifdefed by LINUX_VERSION_CODE. While at it, also remove surrounding code which is commented out, or '#if 1' nops. Signed-off-by:
-
Ben Hutchings authored
The current code creates directories in procfs named after interfaces, but doesn't handle renaming. This can result in name collisions and consequent WARNINGs. It also means that the interface name cannot reliably be used to remove the directory - in fact the current code doesn't even try, and always uses "wlan0"! Since the name of a proc_dir_entry is embedded in it, use that when removing it. Add a netdev notifier to catch interface renaming, and remove and re-add the directory at this point. Signed-off-by:Ben Hutchings <ben@decadent.org.uk>
-
Ben Hutchings authored
Currently various resources may be leaked in case of an error. Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Add a spin_unlock and mutex_unlock missing on the error path. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1; @@ * spin_lock(E1,...); <+... when != E1 if (...) { ... when != E1 * return ...; } ...+> * spin_unlock(E1,...); // </smpl> Signed-off-by:
Martyn Welch <martyn.welch@ge.com> Signed-off-by:
-
Nanakos Chrysostomos authored
Fix resolves checkpatch.pl issues for vme_user.c file. Signed-off-by:
Nanakos Chrysostomos <nanakos@wired-net.gr> Signed-off-by:
-
Matthias Brugger authored
Signed-off-by:
Matthias Brugger <mensch0815@gmail.com> Signed-off-by:
-
Barry Song authored
Signed-off-by:
Barry Song <21cnbao@gmail.com> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Barry Song authored
1. move adis16400_spi_read_burst() to adis16400_ring.c since it is only called there 2. add the lost calling to adis16400_self_test() 3. codes cleanup Signed-off-by:
-
Barry Song authored
1. add delay between spi transfers 2. move burst read to ring function 3. clean-up Signed-off-by:
-
Dan Carpenter authored
The sysfs attribute call backs take a file pointer these days. This was added in 2c3c8bea "sysfs: add struct file* to bin_attr callbacks" Signed-off-by:
-
Jonathan Cameron authored
As suggested by Charles Clement Signed-off-by:
-
Mike Frysinger authored
These drivers use kzalloc() but don't include slab.h. They currently build though because the spi.h header will pull in slab.h for us. But rather than rely on that behavior forever, include slab.h explicitly. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Acked-by:
-
Mike Frysinger authored
A bunch of IIO files contain spurious semicolons after function definitions and case statements and if statements. Guess people really like this thing, but kill them anyways so they'll stop spreading via copy & paste with new drivers. Signed-off-by:
-
Mike Frysinger authored
Standardize the spacing/style across the IIO build files: - comment block in Kconfigs - newlines at ends of files - trailing lines at ends of files - indent with one tab, not spaces or mixed Signed-off-by:
-
Nitin Gupta authored
Related changes: - Included example to show usage as generic (non-swap) disk with ext4 filesystem. - Renamed rzscontrol to zramconfig to match with new device naming. Signed-off-by:
Nitin Gupta <ngupta@vflare.org> Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Nitin Gupta authored
Automated renames in code: - rzs* -> zram* - RZS* -> ZRAM* - ramzswap* -> zram* Manual changes: - Edited comments/messages mentioning "swap" Signed-off-by:
-
Nitin Gupta authored
Related changes: - Modify revelant Kconfig and Makefile accordingly. - Change include filenames in code. - Remove dependency on CONFIG_SWAP in Kconfig as zram usage is no longer limited to swap disks. Signed-off-by:
-
Nitin Gupta authored
Currently, ramzwap devices (/dev/ramzswapX) can only be used as swap disks since it was hard-coded to consider only the first request in bio vector. Now, we iterate over all the segments in an incoming bio which allows us to handle all kinds of I/O requests. ramzswap devices can still handle PAGE_SIZE aligned and multiple of PAGE_SIZE sized I/O requests only. To ensure that we get always get such requests only, we set following request_queue attributes to PAGE_SIZE: - physical_block_size - logical_block_size - io_min - io_opt Note: physical and logical block sizes were already set equal to PAGE_SIZE and that seems to be sufficient to get PAGE_SIZE aligned I/O. Since we are no longer limited to handling swap requests only, the next few patches rename ramzswap to zram. So, the devices will then be called /dev/zram{0, 1, 2, ...} Usage/Examples: 1) Use as /tmp storage - mkfs.ext4 /dev/zram0 - mount /dev/zram0 /tmp 2) Use as swap: - mkswap /dev/zram0 - swapon /dev/zram0 -p 10 # give highest priority to zram0 Performance: - I/O benchamark done with 'dd' command. Details can be found here: http://code.google.com/p/compcache/wiki/zramperf Summary: - Maximum read speed (approx): - ram disk: 1200 MB/sec - zram disk: 600 MB/sec - Maximum write speed (approx): - ram disk: 500 MB/sec - zram disk: 160 MB/sec Issues: - Double caching: We can potentially waste memory by having two copies of a page -- one in page cache (uncompress) and second in the device memory (compressed). However, during reclaim, clean page cache pages are quickly freed, so this does not seem to be a big problem. - Stale data: Not all filesystems support issuing 'discard' requests to underlying block devices. So, if such filesystems are used over zram devices, we can accumulate lot of stale data in memory. Even for filesystems to do support discard (example, ext4), we need to see how effective it is. - Scalability: There is only one (per-device) de/compression buffer stats. This can lead to significant contention, especially when used for generic (non-swap) purposes. Signed-off-by: -
Naveen Jain authored
Older mechanism of counting the number of protocols registered with ST was slow, in-efficient. It used to check the protocol data for NULL for each registration/unregistration. With this change, counting protocols in maintained by a single counter protos_registered. Counting protocols is not just for debug purposes Signed-off-by:
Naveen Jain <naveen_jain@ti.com> Signed-off-by:
-
Naveen Jain authored
Add version information to be available under the sysfs group for kim. Signed-off-by:
-
Naveen Jain authored
Remove the older way of communicating with user-space daemon UIM. The older way involved creating of a new kobj and pid sysfs file under it, and sending signal using that pid. Now we communicate via rfkill to user-space UIM. Background: UIM is the user-space daemon which upon notification from ldisc driver, opens the tty, sets default baud and then installs (tiocsetd) the ldisc. Signed-off-by:
-
Pavan Savoy authored
Update the TODO of TI-ST to make sure it reflects current list of activities that need to be done. Also point it out to the user-space app code relevant to it. Signed-off-by:
Pavan Savoy <pavan_savoy@ti.com> Signed-off-by:
-
R.M. Thomas authored
This adds the easycap USB video adapter driver to the staging directory. Signed-off-by: -
-
Charles Clément authored
Rename driver struct and callbacks to vt6655_* instead of device_* and add __devinit/__devexit directives. Signed-off-by:
Charles Clément <caratorn@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Timofey Trofimov authored
This is a patch to the 80211mgr.c file that fixes up warnings found by the checkpatch.pl tool Signed-off-by:
Timofey Trofimov <tumoxep@gmail.com> Signed-off-by:
-
Otavio Salvador authored
Fix this build error: drivers/staging/vt6656/built-in.o: In function `rotr1': (.text+0x1a878): multiple definition of `rotr1' drivers/staging/rt2870/built-in.o:(.text+0x106c2): first defined here drivers/staging/vt6656/built-in.o: In function `tkip_sbox': (.text+0x1a848): multiple definition of `tkip_sbox' drivers/staging/rt2870/built-in.o:(.text+0x10697): first defined here drivers/staging/vt6656/built-in.o: In function `xor_32': (.text+0x1ec24): multiple definition of `xor_32' drivers/staging/rt2870/built-in.o:(.text+0x111c4): first defined here drivers/staging/vt6656/built-in.o: In function `xor_128': (.text+0x1ec00): multiple definition of `xor_128' drivers/staging/rt2870/built-in.o:(.text+0x111dd): first defined here Signed-off-by:
Otavio Salvador <otavio@ossystems.com.br> Signed-off-by:
-
