- 02 Aug, 2006 16 commits
-
-
Peter Chubb authored
The RTL8150 driver currently crashes the kernel if the USB lead is unplugged while the device is active. The attached patch adds error handling to tell the network layer that the device has gone away when the device is unplugged. With this patch, the device can be plugged and unplugged to one's hearts' content, without crashing anything. Oh, I've also added rudimentary suspend and resume methods. Signed-off-by:
Peter Chubb <peter@gelato.unsw.edu.au> Acked-by:
Petko Manolov <petkan@nucleusys.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Bock authored
Signed-off-by: -
Phil Dibowitz authored
This entry has been a mystery for some time. I had sent this patch as an RFC a while ago, and now we've had two reports of this not being needed, so I'm removing it. In the event there are reports of breakage, we should revert this patch, but add a US_FL_NEED_OVERRIDE flag. Signed-off-by:
Phil Dibowitz <phil@ipom.com> Signed-off-by:
-
Daniel Drake authored
This patch adds a new unusual_devs flag for when usb-storage needs to ignore a device that it would otherwise claim. We need to ignore the ZyXEL G220F as it is a virtual CDROM drive which includes the windows driver for this USB-WLAN adapter. After the windows driver is installed on a windows system, it converts it into a WLAN adapter (by ejecting the virtual disc). The virtual CDROM is of no interest to Linux users. The zd1211rw driver will automatically perform the eject operation, we just need to ensure that usb-storage does not claim the device. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Kim Oldfield authored
Can you add the USB IDs for the Belkin USB Serial adapter (P/N F5U257) to the pl2303 driver in the Linux Kernel? Are you the appropriate person to approach for this? I recently purchased a Belkin USB Serial adapter (P/N F5U257) and found that it didn't work. After a bit of experimentation I found that it works with the pl2303 driver once the ID has been added. See attached patch to fix this. Also attached is the output from lsusb -v just in case you require any information from there. From: Kim Oldfield <luv@oldfield.wattle.id.au> Signed-off-by: -
Dave Platt authored
Here's a short patch which adds one PID to the set of devices supported by the ftdi_sio driver. The device in question is a DLP module used as part of a ham radio USB-to-packet adapter. From: Dave Platt <dplatt@radagast.org> Signed-off-by: -
Norihiko Tomiyama authored
This small patch enables a support of "SHARP WS003SH". "SHARP WS003SH" (usullary called "W-ZERO3") is most polular All-in-one handheld CellPhone-plus-WindowsMobile5.0 in Japan. "SHARP WS003SH" has two modes, "Modem" and "ActiveSync". But, "ActiveSync" mode uses NDIS connection. Therefore, ipaq.c can only support "Modem" mode. http://www.sharp.co.jp/ws/ (Japanese Site) http://greggman.com/edit/editheadlines/2005-12-24.htm From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by:
-
Li Yang authored
The high-speed USB SOC only exists on MPC834x family not MPC83xx family. Signed-off-by:
Li Yang <leoli@freescale.com> Acked-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Matthias Urlichs authored
Dead code. From: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: -
Matthias Urlichs authored
This device is now supported by sierra.c. From: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: -
Matthias Urlichs authored
Signed-off-by:
Jon K Hellan <hellan@acm.org> Signed-Off-By:
Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by:
-
Matthias Urlichs authored
The short driver names were not unique, which prevented the driver from actually loading. Also, one of the ioctl pointers was missing. Signed-Off-By:
-
Matthias Urlichs authored
Signed-off-by:
-
David Brownell authored
OHCI updates for AT91 series processors: - Get ready for at91sam926x processors (ARMv5tej not ARMv4t) - Suspend/resume support now behaves properly - In "standby" mode, OHCI can be a source of system wakeup events (remote wakeup, device connect/disconnect, etc) And minor cleanups. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Signed-off-by:
-
David Brownell authored
UDC updates for AT91 series processors: - Get ready for at91sam926x processors (ARMv5tej not ARMv4t) - Suspend/resume support now behaves properly - In "standby" mode, UDC can be a source of system wakeup events (host resume, device connect/disconnect, etc) - Fix IRQ storming issues, seemingly related to clock disabling changes that went in a while back And minor cleanups, especially whitespace. Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits) V4L/DVB (4380): Bttv: Revert VBI_OFFSET to previous value, it works better V4L/DVB (4379): Videodev: Check return value of class_device_register() correctly V4L/DVB (4373): Correctly handle sysfs error leg file removal in pvrusb2 V4L/DVB (4368): Bttv: use class_device_create_file and handle errors V4L/DVB (4367): Videodev: Handle class_device related errors V4L/DVB (4365): OVERLAY flag were enabled by mistake V4L/DVB (4344): Fix broken dependencies on media Kconfig V4L/DVB (4343): Fix for compilation without V4L1 or V4L1_COMPAT V4L/DVB (4342): Fix ext_controls align on 64 bit architectures V4L/DVB (4341): VIDIOCSMICROCODE were missing on compat_ioctl32 V4L/DVB (4322): Fix dvb-pll autoprobing V4L/DVB (4311): Fix possible dvb-pll oops V4L/DVB (4337): Refine dead code elimination in pvrusb2 V4L/DVB (4323): [budget/budget-av/budget-ci/budget-patch drivers] fixed DMA start/stop code V4L/DVB (4316): Check __must_check warnings V4L/DVB (4314): Set the Auxiliary Byte when tuning LG H06xF in analog mode V4L/DVB (4313): Bugfix for keycode calculation on NPG remotes V4L/DVB (4310): Saa7134: rename dmasound_{init, exit} V4L/DVB (4306): Support non interlaced capture by default for saa713x V4L/DVB (4298): Check all __must_check warnings in bttv. ...
-
- 31 Jul, 2006 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Minor comment fix for misc_64.S [POWERPC] Use H_CEDE on non-SMT [POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs [POWERPC] PMAC_APM_EMU should depend on ADB_PMU [POWERPC] Fix new interrupt code (MPIC detection) [POWERPC] Fix new interrupt code (MPIC endianness) [POWERPC] Add cpufreq support for Xserve G5 [POWERPC] Xserve G5 thermal control fixes [POWERPC] Fix mem= handling when the memory limit is > RMO size [POWERPC] More offb/bootx fixes [POWERPC] Fix legacy_serial.c error handling on 32 bits [POWERPC] Fix default clock for udbg_16550 [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set [POWERPC] Fix 32 bits warning in prom_init.c [POWERPC] Workaround Pegasos incorrect ISA "ranges" [POWERPC] fix up front-LED Kconfig
-
Guido Guenther authored
Since we now use the generic backlight infrastructure, I think we need to call rivafb_bl_init before calling register_framebuffer since otherwise rivafb_bl_init might race with the framebuffer layer already opening the device and setting up the video mode. In this case we might end up with a not yet fully intialized backlight (info->bl_dev still NULL) when calling riva_bl_set_power via rivafb_set_par/rivafb_load_video_mode and the kernel dies without any further notice during boot. This fixes booting current git on a PB 6,1. In this case radeonfb/atyfb would be affected too - I can fix that too but don't have any hardware to test this on. Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Arthur Othieno authored
CONFIG_FB_NVIDIA already depends on CONFIG_PCI in drivers/video/Kconfig. Driver does an extra ``sanity check'' which is then redundant. Signed-off-by:
Arthur Othieno <apgo@patchbomb.org> Cc: Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Michael Hanselmann authored
This patch fixes several problems: - The legacy backlight value might be set at interrupt time. Introduced a worker to prevent it from directly calling the backlight code. - via-pmu allows the backlight to be grabbed, in which case we need to prevent other kernel code from changing the brightness. - Don't send PMU requests in via-pmu-backlight when the machine is about to sleep or waking up. - More Kconfig fixes. Signed-off-by:
Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Volker Braun authored
Many IBM Thinkpad T4* models and some R* and X* with radeon video cards draw too much power when suspended to RAM, reducing drastically the battery lifetime. The solution is to enable suspend-to-D2 on these machines. They are whitelisted through their subsystem vendor/device ID. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=3022 The patch introduces a framework to alter the pm_mode and reinit_func fields of the radeonfb_info structure based on a whitelist. This should facilitate future hardware-dependent workarounds. The workaround for the Samsung P35 that is already in the radeonfb code has been rewritten using this framework. The behavior can be overridden with module options: i) video=radeonfb:force_sleep=1 enable suspend-to-D2 also on non-whitelisted machines (useful for testing new notebook models), ii) video=radeonfb:ignore_devlist=1 Disable checking the whitelist and do not apply any workarounds. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
The backlight and lcd subsystems can be notified by the framebuffer layer of blanking events. However, these subsystems, as a whole, can function independently from the framebuffer layer. But in order to enable to the lcd and backlight subsystems, the framebuffer has to be compiled also, effectively sucking in a huge amount of unneeded code. To prevent dependency problems, separate out the framebuffer notification mechanism from the framebuffer layer and permanently link it to the kernel. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Eric Van Hensbergen authored
Based on a bug report from Russ Ross <russruss@gmail.com> According to the spec: "The remove request asks the file server both to remove the file represented by fid and to clunk the fid, even if the remove fails." but the Linux client seems to expect the fid to be valid after a failed remove attempt. Specifically, I'm getting this behavior when attempting to remove a non-empty directory. Signed-off-by:
Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Use preferred email address. Remove sf.net project reference. It is no longer used. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Russ Ross authored
Signed-off-by:
Russ Ross <russross@gmail.com> Signed-off-by:
-
Badari Pulavarty authored
For files other than IFREG, nobh option doesn't make sense. Modifications to them are journalled and needs buffer heads to do that. Without this patch, we get kernel oops in page_buffers(). Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by:
-
Josh Triplett authored
kernel/timer.c defines a (per-cpu) pointer to tvec_base_t, but initializes it using { &a_tvec_base_t }, which sparse warns about; change this to just &a_tvec_base_t. Signed-off-by:Josh Triplett <josh@freedesktop.org> Signed-off-by:
-
Josh Triplett authored
Commit 7b2fd697427e73c81d5fa659efd91bd07d303b0e in the historical GIT tree stopped calling the readdir member of a file_operations struct with the big kernel lock held, and fixed up all the readdir functions to do their own locking. However, that change added calls to unlock_kernel() in vxfs_readdir, but no call to lock_kernel(). Fix this by adding a call to lock_kernel(). Signed-off-by:
-
Thomas Horsley authored
I spent a long time the other day trying to examine an initrd image on a fedora core 5 system because the initrd.txt file is apparently obsolete. Here is a patch which I hope will reduce future confusion for others. Signed-off-by:
Thomas Horsley <tom.horsley@ccur.com> Signed-off-by:
-
Ingo Molnar authored
Clean up ipc/msg.c to conform to Documentation/CodingStyle. (before it was an inconsistent hodepodge of various coding styles) Verified that the before/after .o's are identical. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Miklos Szeredi authored
Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Miklos Szeredi authored
It is entirely possible (though rare) that jiffies half-wraps around, while a dentry/inode remains in the cache. This could mean that the dentry/inode is not invalidated for another half wraparound-time. To get around this problem, use 64-bit jiffies. The only problem with this is that dentry->d_time is 32 bits on 32-bit archs. So use d_fsdata as the high 32 bits. This is an ugly hack, but far simpler, than having to allocate private data just for this purpose. Since 64-bit jiffies can be assumed never to wrap around, simple comparison can be used, and a zero time value can represent "invalid". Signed-off-by:
-
Miklos Szeredi authored
An attribute and entry timeout of zero should mean, that the entity is invalidated immediately after the operation. Previously invalidation only happened at the next clock tick. Reported and tested by Craig Davies. Signed-off-by:
-
Markus Armbruster authored
CFA needs to be adjusted upwards for push, and downwards for pop. arch/i386/kernel/entry.S gets it wrong in one place. Signed-off-by:
Markus Armbruster <armbru@redhat.com> Acked-by:
Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Roland McGrath authored
The latest toolchains can produce a new ELF section in DSOs and dynamically-linked executables. The new section ".gnu.hash" replaces ".hash", and allows for more efficient runtime symbol lookups by the dynamic linker. The new ld option --hash-style={sysv|gnu|both} controls whether to produce the old ".hash", the new ".gnu.hash", or both. In some new systems such as Fedora Core 6, gcc by default passes --hash-style=gnu to the linker, so that a standard invocation of "gcc -shared" results in producing a DSO with only ".gnu.hash". The new ".gnu.hash" sections need to be dealt with the same way as ".hash" sections in all respects; only the dynamic linker cares about their contents. To work with older dynamic linkers (i.e. preexisting releases of glibc), a binary must have the old ".hash" section. The --hash-style=both option produces binaries that a new dynamic linker can use more efficiently, but an old dynamic linker can still handle. The new section runs afoul of the custom linker scripts used to build vDSO images for the kernel. On ia64, the failure mode for this is a boot-time panic because the vDSO's PT_IA_64_UNWIND segment winds up ill-formed. This patch addresses the problem in two ways. First, it mentions ".gnu.hash" in all the linker scripts alongside ".hash". This produces correct vDSO images with --hash-style=sysv (or old tools), with --hash-style=gnu, or with --hash-style=both. Second, it passes the --hash-style=sysv option when building the vDSO images, so that ".gnu.hash" is not actually produced. This is the most conservative choice for compatibility with any old userland. There is some concern that some ancient glibc builds (though not any known old production system) might choke on --hash-style=both binaries. The optimizations provided by the new style of hash section do not really matter for a DSO with a tiny number of symbols, as the vDSO has. If someone wants to use =gnu or =both for their vDSO builds and worry less about that compatibility, just change the option and the linker script changes will make any choice work fine. Signed-off-by:Roland McGrath <roland@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Andi Kleen <ak@muc.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Michael Buesch authored
The geode hwrng leaks an iomapped resource, if hwrng_register() fails. This fixes it. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Michael Buesch authored
The intel hwrng leaks an iomapped resource, if hwrng_register() failes. This fixes it. Signed-off-by:
-
Rolf Eike Beer authored
kmem_cache_alloc() was documented twice, but kmem_cache_zalloc() never. Fix this obvious typo to get things right. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
-
Steven Rostedt authored
In order to prevent Doc Rot, this patch adds a reference to the design document for rtmutex.c in rtmutex.c. So when someone needs to update or change the design of that file they will know that a document actually exists that explains the design (helping them change it), and hopefully that they will update the document if they too change the design. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Uwe Zeisberger authored
There is currently no affected user in the tree, but usage is less surprising that way. Signed-off-by:
Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by:
-
