- 04 Apr, 2013 3 commits
-
-
Trond Myklebust authored
If the rpcsec_gss_krb5 module cannot be loaded, the attempt to create an rpc_client in nfs4_init_client will currently fail with an EINVAL. Fix is to retry with AUTH_NULL. Regression introduced by the commit "NFS: Use "krb5i" to establish NFSv4 state whenever possible" Signed-off-by:Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Bryan Schumaker <bjschuma@netapp.com>
-
Chuck Lever authored
Since commit ec88f28d in 2009, checking if the user-specified flavor is in the server's flavor list has been the source of a few noticeable regressions (now fixed), but there is one that is still vexing. An NFS server can list AUTH_NULL in its flavor list, which suggests a client should try to mount the server with the flavor of the client's choice, but the server will squash all accesses. In some cases, our client fails to mount a server because of this check, when the mount could have proceeded successfully. Skip this check if the user has specified "sec=" on the mount command line. But do consult the server-provided flavor list to choose a security flavor if no sec= option is specified on the mount command. If a server lists Kerberos pseudoflavors before "sys" in its export options, our client now chooses Kerberos over AUTH_UNIX for mount points, when no security flavor is specified by the mount command. This could be surprising to some administrators or users, who would then need to have Kerberos credentials to access the export. Or, a client administrator may not have enabled rpc.gssd. In this case, auth_rpcgss.ko might still be loadable, which is enough for the new logic to choose Kerberos over AUTH_UNIX. But the mount would fail since no GSS context can be created without rpc.gssd running. To retain the use of AUTH_UNIX by default: o The server administrator can ensure that "sys" is listed before Kerberos flavors in its export security options (see exports(5)), o The client administrator can explicitly specify "sec=sys" on its mount command line (see nfs(5)), o The client administrator can use "Sec=sys" in an appropriate section of /etc/nfsmount.conf (see nfsmount.conf(5)), or o The client administrator can blacklist auth_rpcgss.ko. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
RPC_AUTH_MAXFLAVOR is an invalid flavor, on purpose. Don't allow any processing whatsoever if a caller passes it to rpcauth_create() or rpcauth_get_gssinfo(). Signed-off-by:
-
- 29 Mar, 2013 15 commits
-
-
Chuck Lever authored
Currently our client uses AUTH_UNIX for state management on Kerberos NFS mounts in some cases. For example, if the first mount of a server specifies "sec=sys," the SETCLIENTID operation is performed with AUTH_UNIX. Subsequent mounts using stronger security flavors can not change the flavor used for lease establishment. This might be less security than an administrator was expecting. Dave Noveck's migration issues draft recommends the use of an integrity-protecting security flavor for the SETCLIENTID operation. Let's ignore the mount's sec= setting and use krb5i as the default security flavor for SETCLIENTID. If our client can't establish a GSS context (eg. because it doesn't have a keytab or the server doesn't support Kerberos) we fall back to using AUTH_NULL. For an operation that requires a machine credential (which never represents a particular user) AUTH_NULL is as secure as AUTH_UNIX. Signed-off-by:
-
Chuck Lever authored
Most NFSv4 servers implement AUTH_UNIX, and administrators will prefer this over AUTH_NULL. It is harmless for our client to try this flavor in addition to the flavors mandated by RFC 3530/5661. Signed-off-by:
-
Chuck Lever authored
If the Linux NFS client receives an NFS4ERR_WRONGSEC error while trying to look up an NFS server's root file handle, it retries the lookup operation with various security flavors to see what flavor the NFS server will accept for pseudo-fs access. The list of flavors the client uses during retry consists only of flavors that are currently registered in the kernel RPC client. This list may not include any GSS pseudoflavors if auth_rpcgss.ko has not yet been loaded. Let's instead use a static list of security flavors that the NFS standard requires the server to implement (RFC 3530bis, section 3.2.1). The RPC client should now be able to load support for these dynamically; if not, they are skipped. Recovery behavior here is prescribed by RFC 3530bis, section 15.33.5: > For LOOKUPP, PUTROOTFH and PUTPUBFH, the client will be unable to > use the SECINFO operation since SECINFO requires a current > filehandle and none exist for these two [sic] operations. Therefore, > the client must iterate through the security triples available at > the client and reattempt the PUTROOTFH or PUTPUBFH operation. In > the unfortunate event none of the MANDATORY security triples are > supported by the client and server, the client SHOULD try using > others that support integrity. Failing that, the client can try > using AUTH_NONE, but because such forms lack integrity checks, > this puts the client at risk. Signed-off-by:
-
Chuck Lever authored
Currently, the compound operation the Linux NFS client sends to the server to confirm a client ID looks like this: { SETCLIENTID_CONFIRM; PUTROOTFH; GETATTR(lease_time) } Once the lease is confirmed, it makes sense to know how long before the client will have to renew it. And, performing these operations in the same compound saves a round trip. Unfortunately, this arrangement assumes that the security flavor used for establishing a client ID can also be used to access the server's pseudo-fs. If the server requires a different security flavor to access its pseudo-fs than it allowed for the client's SETCLIENTID operation, the PUTROOTFH in this compound fails with NFS4ERR_WRONGSEC. Even though the SETCLIENTID_CONFIRM succeeded, our client's trunking detection logic interprets the failure of the compound as a failure by the server to confirm the client ID. As part of server trunking detection, the client then begins another SETCLIENTID pass with the same nfs4_client_id. This fails with NFS4ERR_CLID_INUSE because the first SETCLIENTID/SETCLIENTID_CONFIRM already succeeded in confirming that client ID -- it was the PUTROOTFH operation that caused the SETCLIENTID_CONFIRM compound to fail. To address this issue, separate the "establish client ID" step from the "accessing the server's pseudo-fs root" step. The first access of the server's pseudo-fs may require retrying the PUTROOTFH operation with different security flavors. This access is done in nfs4_proc_get_rootfh(). That leaves the matter of how to retrieve the server's lease time. nfs4_proc_fsinfo() already retrieves the lease time value, though none of its callers do anything with the retrieved value (nor do they mark the lease as "renewed"). Note that NFSv4.1 state recovery invokes nfs4_proc_get_lease_time() using the lease management security flavor. This may cause some heartburn if that security flavor isn't the same as the security flavor the server requires for accessing the pseudo-fs. Signed-off-by: -
Chuck Lever authored
The long lines with no vertical white space make this function difficult for humans to read. Add a proper documenting comment while we're here. Signed-off-by:
-
Chuck Lever authored
When rpc.gssd is not running, any NFS operation that needs to use a GSS security flavor of course does not work. If looking up a server's root file handle results in an NFS4ERR_WRONGSEC, nfs4_find_root_sec() is called to try a bunch of security flavors until one works or all reasonable flavors have been tried. When rpc.gssd isn't running, this loop seems to fail immediately after rpcauth_create() craps out on the first GSS flavor. When the rpcauth_create() call in nfs4_lookup_root_sec() fails because rpc.gssd is not available, nfs4_lookup_root_sec() unconditionally returns -EIO. This prevents nfs4_find_root_sec() from retrying any other flavors; it drops out of its loop and fails immediately. Having nfs4_lookup_root_sec() return -EACCES instead allows nfs4_find_root_sec() to try all flavors in its list. Signed-off-by:
-
Chuck Lever authored
Clean up: Reduce the symbol table footprint for auth_rpcgss.ko by removing exported symbols for functions that are no longer used outside of auth_rpcgss.ko. The remaining two EXPORTs in gss_mech_switch.c get documenting comments. Signed-off-by:
-
Chuck Lever authored
gss_mech_get() is no longer used outside of gss_mech_switch.c. Signed-off-by:
-
Chuck Lever authored
Clean up. This matches a similar API for the client side, and keeps ULP fingers out the of the GSS mech switch. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Chuck Lever authored
The NFSv4 SECINFO operation returns a list of security flavors that the server supports for a particular share. An NFSv4 client is supposed to pick a pseudoflavor it supports that corresponds to one of the flavors returned by the server. GSS flavors in this list have a GSS tuple that identify a specific GSS pseudoflavor. Currently our client ignores the GSS tuple's "qop" value. A matching pseudoflavor is chosen based only on the OID and service value. So far this omission has not had much effect on Linux. The NFSv4 protocol currently supports only one qop value: GSS_C_QOP_DEFAULT, also known as zero. However, if an NFSv4 server happens to return something other than zero in the qop field, our client won't notice. This could cause the client to behave in incorrect ways that could have security implications. Signed-off-by:
-
Chuck Lever authored
The current GSS mech switch can find and load GSS pseudoflavor modules by name ("krb5") or pseudoflavor number ("390003"), but cannot find GSS modules by GSS tuple: [ "1.2.840.113554.1.2.2", GSS_C_QOP_DEFAULT, RPC_GSS_SVC_NONE ] This is important when dealing with a SECINFO request. A SECINFO reply contains a list of flavors the server supports for the requested export, but GSS flavors also have a GSS tuple that maps to a pseudoflavor (like 390003 for krb5). If the GSS module that supports the OID in the tuple is not loaded, our client is not able to load that module dynamically to support that pseudoflavor. Add a way for the GSS mech switch to load GSS pseudoflavor support by OID before searching for the pseudoflavor that matches the OID and service. Signed-off-by: -
Chuck Lever authored
A SECINFO reply may contain flavors whose kernel module is not yet loaded by the client's kernel. A new RPC client API, called rpcauth_get_pseudoflavor(), is introduced to do proper checking for support of a security flavor. When this API is invoked, the RPC client now tries to load the module for each flavor first before performing the "is this supported?" check. This means if a module is available on the client, but has not been loaded yet, it will be loaded and registered automatically when the SECINFO reply is processed. The new API can take a full GSS tuple (OID, QoP, and service). Previously only the OID and service were considered. nfs_find_best_sec() is updated to verify all flavors requested in a SECINFO reply, including AUTH_NULL and AUTH_UNIX. Previously these two flavors were simply assumed to be supported without consulting the RPC client. Note that the replaced version of nfs_find_best_sec() can return RPC_AUTH_MAXFLAVOR if the server returns a recognized OID but an unsupported "service" value. nfs_find_best_sec() now returns RPC_AUTH_UNIX in this case. Signed-off-by:
-
Chuck Lever authored
The NFSv4 SECINFO procedure returns a list of security flavors. Any GSS flavor also has a GSS tuple containing an OID, a quality-of- protection value, and a service value, which specifies a particular GSS pseudoflavor. For simplicity and efficiency, I'd like to return each GSS tuple from the NFSv4 SECINFO XDR decoder and pass it straight into the RPC client. Define a data structure that is visible to both the NFS client and the RPC client. Take structure and field names from the relevant standards to avoid confusion. Signed-off-by:
-
Chuck Lever authored
I've built with NFSv4 enabled and disabled. This forward declaration does not seem to be required. Signed-off-by:
-
Chuck Lever authored
Commit f344f6df "SUNRPC: Auto-load RPC authentication kernel modules", Mon Mar 20 13:44:08 2006, adds a request_module() call in rpcauth_create() to auto-load RPC security modules when a ULP tries to create a credential of that flavor. In rpcauth_create(), the name of the module to load is built like this: request_module("rpc-auth-%u", flavor); This means that for, say, RPC_AUTH_GSS, request_module() is looking for a module or alias called "rpc-auth-6". The GSS module is named "auth_rpcgss", and commit f344f6df does not add any new module aliases. There is also no such alias provided in /etc/modprobe.d on my system (Fedora 16). Without this alias, the GSS module is not loaded on demand. This is used by rpcauth_create(). The pseudoflavor_to_flavor() call can return RPC_AUTH_GSS, which is passed to request_module(). Signed-off-by:
-
- 28 Mar, 2013 2 commits
-
-
Trond Myklebust authored
If the server sends us a pathname with more components than the client limit of NFS4_PATHNAME_MAXCOMPONENTS, more server entries than the client limit of NFS4_FS_LOCATION_MAXSERVERS, or sends a total number of fs_locations entries than the client limit of NFS4_FS_LOCATIONS_MAXENTRIES then we will currently Oops because the limit checks are done _after_ we've decoded the data into the arrays. Reported-by: fanchaoting<fanchaoting@cn.fujitsu.com> Signed-off-by: -
Trond Myklebust authored
If the open_context for the file is not yet fully initialised, then open recovery cannot succeed, and since nfs4_state_find_open_context returns an ENOENT, we end up treating the file as being irrecoverable. What we really want to do, is just defer the recovery until later. Signed-off-by:
-
- 27 Mar, 2013 1 commit
-
-
Trond Myklebust authored
With unlink is an asynchronous operation in the sillyrename case, it expects nfs4_async_handle_error() to map the error correctly. Signed-off-by:
-
- 25 Mar, 2013 13 commits
-
-
Trond Myklebust authored
Now that we do CLAIM_FH opens, we may run into situations where we get a delegation but don't have perfect knowledge of the file path. When returning the delegation, we might therefore not be able to us CLAIM_DELEGATE_CUR opens to convert the delegation into OPEN stateids and locks. Signed-off-by: -
Trond Myklebust authored
Sometimes, we actually _want_ to do open-by-filehandle, for instance when recovering opens after a network partition, or when called from nfs4_file_open. Enable that functionality using a new capability NFS_CAP_ATOMIC_OPEN_V1, and which is only enabled for NFSv4.1 servers that support it. Signed-off-by: -
Trond Myklebust authored
Signed-off-by: -
Trond Myklebust authored
Signed-off-by: -
Trond Myklebust authored
Follow the practice described in section 8.2.2 of RFC5661: When sending a read/write or setattr stateid, set the seqid field to zero in order to signal that the NFS server should apply the most recent locking state. Signed-off-by: -
Trond Myklebust authored
Clean up the setting of the nfs_server->caps, by shoving it all into nfs4_server_common_setup(). Then add an 'initial capabilities' field into struct nfs4_minor_version_ops. Signed-off-by: -
Trond Myklebust authored
Adds logic to ensure that if the server returns a BAD_STATEID, or other state related error, then we check if the stateid has already changed. If it has, then rather than start state recovery, we should just resend the failed RPC call with the new stateid. Allow nfs4_select_rw_stateid to notify that the stateid is unstable by having it return -EWOULDBLOCK if an RPC is underway that might change the stateid. Signed-off-by: -
Trond Myklebust authored
If we replay a READ or WRITE call, we should not be changing the stateid. Currently, we may end up doing so, because the stateid is only selected at xdr encode time. This patch ensures that we select the stateid after we get an NFSv4.1 session slot, and that we keep that same stateid across retries. Signed-off-by: -
Trond Myklebust authored
Currently, we're forcing an unnecessary duplication of the initial nfs_lock_context in calls to nfs_get_lock_context, since __nfs_find_lock_context ignores the ctx->lock_context. Signed-off-by: -
Trond Myklebust authored
If the state recovery failed, we want to ensure that the application doesn't try to use the same file descriptor for more reads or writes. Signed-off-by: -
Trond Myklebust authored
If state recovery fails with an ESTALE or a ENOENT, then we shouldn't keep retrying. Instead, mark the stateid as being invalid and fail the I/O with an EIO error. For other operations such as POSIX and BSD file locking, truncate etc, fail with an EBADF to indicate that this file descriptor is no longer valid. Signed-off-by: -
Trond Myklebust authored
In the case of a SOFTCONN rpc task, we really want to ensure that it reports errors like ENETUNREACH back to the caller. Currently, only some of these errors are being reported back (connect errors are not), and they are being converted by the RPC layer into EIO. Reported-by:
Jan Engelhardt <jengelh@inai.de> Signed-off-by:
-
Trond Myklebust authored
We need to be careful when testing task->tk_waitqueue in rpc_wake_up_task_queue_locked, because it can be changed while we are holding the queue->lock. By adding appropriate memory barriers, we can ensure that it is safe to test task->tk_waitqueue for equality if the RPC_TASK_QUEUED bit is set. Signed-off-by:
-
- 21 Mar, 2013 4 commits
-
-
Trond Myklebust authored
In order to be able to safely return the layout in nfs4_proc_setattr, we need to block new uses of the layout, wait for all outstanding users of the layout to complete, commit the layout and then return it. This patch adds a helper in order to do all this safely. Signed-off-by: -
Trond Myklebust authored
Note that clearing NFS_INO_LAYOUTCOMMIT is tricky, since it requires you to also clear the NFS_LSEG_LAYOUTCOMMIT bits from the layout segments. The only two sites that need to do this are the ones that call pnfs_return_layout() without first doing a layout commit. Signed-off-by:
Benny Halevy <bhalevy@tonian.com> Cc: stable@vger.kernel.org
-
Trond Myklebust authored
We need to clear the NFS_LSEG_LAYOUTCOMMIT bits atomically with the NFS_INO_LAYOUTCOMMIT bit, otherwise we may end up with situations where the two are out of sync. The first half of the problem is to ensure that pnfs_layoutcommit_inode clears the NFS_LSEG_LAYOUTCOMMIT bit through pnfs_list_write_lseg. We still need to keep the reference to those segments until the RPC call is finished, so in order to make it clear _where_ those references come from, we add a helper pnfs_list_write_lseg_done() that cleans up after pnfs_list_write_lseg. Signed-off-by:
-
fanchaoting authored
when pnfs block using device mapper,if umounting later,it maybe cause oops. we apply "1 + sizeof(bl_umount_request)" memory for msg->data, the memory maybe overflow when we do "memcpy(&dataptr [sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request))", because the size of bl_msg is more than 1 byte. Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 20 Mar, 2013 1 commit
-
-
Trond Myklebust authored
Functions like nfs_map_uid_to_name() and nfs_map_gid_to_group() are expected to return a string without any terminating NUL character. Regression introduced by commit 57e62324 (NFS: Store the legacy idmapper result in the keyring). Reported-by:
Dave Chiluk <dave.chiluk@canonical.com> Signed-off-by:
-
- 03 Mar, 2013 1 commit
-
-
Linus Torvalds authored
-
