- 27 Jul, 2018 9 commits
-
-
Daniel Borkmann authored
Jakub Kicinski says: ==================== This set is focused on improving the performance of perf events reported from BPF offload. Perf events can now be received on packet data queues, which significantly improves the performance (from total of 0.5 Msps to 5Msps per core). To get to this performance we need a fast path for control messages which will operate on raw buffers and recycle them immediately. Patch 5 replaces the map pointers for perf maps with map IDs. We look the pointers up in a hashtable, anyway, to validate they are correct, so there is no performance difference. Map IDs have the advantage of being easier to understand for users in case of errors (we no longer print raw pointers to the logs). Last patch improves info messages about map offload. ==================== Signed-off-by:Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
FW can put constraints on map element size to maximize resource use and efficiency. When user attempts offload of a map which does not fit into those constraints an informational message is printed to kernel logs to inform user about the reason offload failed. Map offload does not have access to any advanced error reporting like verifier log or extack. There is also currently no way for us to nicely expose the FW capabilities to user space. Given all those constraints we should make sure log messages are as informative as possible. Improve them. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Record perf maps by map ID, not raw kernel pointer. This helps with debug messages, because printing pointers to logs is frowned upon, and makes debug easier for the users, as map ID is something they should be more familiar with. Note that perf maps are offload neutral, therefore IDs won't be orphaned. While at it use a rate limited print helper for the error message. Reported-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Control queue is fairly low latency, and requires SKB allocations, which means we can't even reach 0.5Msps with perf events. Allow perf events to be delivered to data queues. This allows us to not only use multiple queues, but also receive and deliver to user space more than 5Msps per queue (Xeon E5-2630 v4 2.20GHz, no retpolines). Signed-off-by:
-
Jakub Kicinski authored
In preparation for SKB-less perf event handling make nfp_bpf_event_output() take buffer address and length, not SKB as parameters. Signed-off-by:
-
Jakub Kicinski authored
Port id 0xffffffff is reserved for control messages. Allow reception of messages with this id on data queues. Hand off a raw buffer to the higher layer code, without allocating SKB for max efficiency. The RX handle can't modify or keep the buffer, after it returns buffer is handed back over to the NIC RX free buffer list. Signed-off-by:
-
Jakub Kicinski authored
Representor packets are received on PF queues with special metadata tag for demux. There is no reason to resolve the representor ID -> netdev after the skb has been allocated. Move the code, this will allow us to handle special FW messages without SKB allocation overhead. Signed-off-by:
-
Taeung Song authored
To smoothly test BTF supported binary on samples/bpf, let samples/bpf/Makefile probe llc, pahole and llvm-objcopy for BPF support and use them like tools/testing/selftests/bpf/Makefile changed from the commit c0fa1b6c ("bpf: btf: Add BTF tests"). Signed-off-by:
Taeung Song <treeze.taeung@gmail.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Reviewed-by:
-
Brian Brooks authored
Define u_smp_rmb() and u_smp_wmb() to respective barrier instructions. This ensures the processor will order accesses to queue indices against accesses to queue ring entries. Signed-off-by:
Brian Brooks <brian.brooks@linaro.org> Acked-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
-
- 26 Jul, 2018 1 commit
-
-
Taeung Song authored
For untracked things of tools/bpf, add this. Reviewed-by:
-
- 25 Jul, 2018 2 commits
-
-
Jeremy Cline authored
Adjust tcp_client.py and tcp_server.py to work with Python 3 by using the print function, marking string literals as bytes, and using the newer exception syntax. This should be functionally equivalent and supports Python 3+. Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
-
YueHaibing authored
Fix inconsistent IS_ERR and PTR_ERR in get_btf, the proper pointer to be passed as argument is '*btf' This issue was detected with the help of Coccinelle. Fixes: 2d3feca8 ("bpf: btf: print map dump and lookup with btf info") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
-
- 24 Jul, 2018 28 commits
-
-
Nishanth Devarajan authored
Skbprio (SKB Priority Queue) is a queueing discipline that prioritizes packets according to their skb->priority field. Under congestion, already-enqueued lower priority packets will be dropped to make space available for higher priority packets. Skbprio was conceived as a solution for denial-of-service defenses that need to route packets with different priorities as a means to overcome DoS attacks. v5 *Do not reference qdisc_dev(sch)->tx_queue_len for setting limit. Instead set default sch->limit to 64. v4 *Drop Documentation/networking/sch_skbprio.txt doc file to move it to tc man page for Skbprio, in iproute2. v3 *Drop max_limit parameter in struct skbprio_sched_data and instead use sch->limit. *Reference qdisc_dev(sch)->tx_queue_len only once, during initialisation for qdisc (previously being referenced every time qdisc changes). *Move qdisc's detailed description from in-code to Documentation/networking. *When qdisc is saturated, enqueue incoming packet first before dequeueing lowest priority packet in queue - improves usage of call stack registers. *Introduce and use overlimit stat to keep track of number of dropped packets. v2 *Use skb->priority field rather than DS field. Rename queueing discipline as SKB Priority Queue (previously Gatekeeper Priority Queue). *Queueing discipline is made classful to expose Skbprio's internal priority queues. Signed-off-by:
Nishanth Devarajan <ndev2021@gmail.com> Reviewed-by:
Sachin Paryani <sachin.paryani@gmail.com> Reviewed-by:
Cody Doucette <doucette@bu.edu> Reviewed-by:
Michel Machado <michel@digirati.com.br> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Certain PHY's have issues when operating in GBit slave mode and can be forced to master mode. Examples are RTL8211C, also the Micrel PHY driver has a DT setting to force master mode. If two such chips are link partners the autonegotiation will fail. Standard defines a self-clearing on read, latched-high bit to indicate this error. Check this bit to inform the user. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Stephen Hemminger says: ==================== net whitespace cleanups Ran script that I use to check for trailing whitespace and blank lines at end of files across all files in net/ directory. These are errors that checkpatch reports and git flags. These are the resulting fixes broken up mostly by subsystem. ==================== Signed-off-by: -
Stephen Hemminger authored
Several files have extra line at end of file. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Remove trailing whitespace and extra lines at EOF Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Remove blank line at EOF and trailing whitespace. Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Remove trailing whitespace and blank lines at EOF Signed-off-by:
-
Tariq Toukan authored
The cited patch added a call to dev_change_tx_queue_len in SIOCSIFTXQLEN case. This obsoletes the new len comparison check done before the function call. Remove it here. For the desicion of keep/remove the negative value check, we examine the range check in dev_change_tx_queue_len. On 64-bit we will fail with -ERANGE. The 32-bit int ifr_qlen will be sign extended to 64-bits when it is passed into dev_change_tx_queue_len(). And then for negative values this test triggers: if (new_len != (unsigned int)new_len) return -ERANGE; because: if (0xffffffffWHATEVER != 0x00000000WHATEVER) On 32-bit the signed value will be accepted, changing behavior. Therefore, the negative value check is kept. Fixes: 3f76df19 ("net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: collect free Tx/Rx pages and page pointers Patch 1 collects number of free PSTRUCT page pointers in context memory. Patch 2 moves the collection logic for Tx/Rx free pages to common code, since this information needs to be collected in vmcore device dump as well. ==================== Signed-off-by: -
Rahul Lakkireddy authored
This information needs to be collected in vmcore device dump as well. So, move to common code. Fixes: fa145d5d ("cxgb4: display number of rx and tx pages free") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add extack messages for tc flower Nir says: This patch set adds extack messages support to tc flower part of mlxsw. The messages provide clear reasoning to failures, as some of the available actions and keys are not supported in driver or HW and resources may get exhausted. The first patch deals with propagation of the extack pointer among the functions dealing with key parsing and action sets handling. Following patches 2-4 add appropriate messages across the different layers of mlxsw tc flower implementation. ==================== Signed-off-by: -
Nir Dotan authored
Return extack messages in order to explain failures of unsupported actions, keys and invalid user input. Signed-off-by:
Nir Dotan <nird@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Nir Dotan authored
Return extack messages for failures in action set creation. Messages provide reasons for not being able to implement the action in HW. Signed-off-by:
-
Nir Dotan authored
Return extack messages for failures in action set creation. Errors may occur when action is not currently supported or due to lack of resources. Signed-off-by:
-
Nir Dotan authored
Propagate extack pointer in order to add extack messages for ACL. In the follow-up patches, appropriate messages will be added in various points. Signed-off-by:
-
Florian Westphal authored
->start() is called once when dump is being initialized, there is no need to store it in netlink_cb. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
