- 14 Nov, 2016 32 commits
-
-
Bartlomiej Zolnierkiewicz authored
This patch disables deprecated IDE subsystem in pasemi_defconfig (no IDE host drivers are selected in this config so there is no valid reason to enable IDE subsystem itself). Cc: Olof Johansson <olof@lixom.net> Signed-off-by:Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maple_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts g5_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts chrp32_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts cell_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts amigaone_defconfig to use libata PATA drivers. Signed-off-by: -
Peter Senna Tschudin authored
Returning a negative value for a boolean function seem to have the undesired effect of returning true. require_paranoia_below() is a boolean function, but the variable used to store the return value is an integer, receiving -1 or 0. This patch converts rc to bool, replaces -1 by false, and 0 by true. mpe: This wasn't exhibiting in practice because the common case, where we do the comparison of the desired level vs the current value, was being compiled into a computation based on the result of the comparison, ie. it wasn't using the default -1 value at all. However that was just luck and the code is still wrong. Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
Andrew Shadura <andrew.shadura@collabora.co.uk> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Johan Hovold authored
Make sure to drop any device reference taken by vio_find_node() when adding and removing virtual I/O slots. Fixes: 5eeb8c63 ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
Add comment clarifying that vio_find_node() takes a reference to the embedded struct device which needs to be dropped after use. Signed-off-by:
-
Johan Hovold authored
Make sure to drop any reference taken by bus_find_device() when creating devices during init and driver registration. Fixes: 55347cc9 ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device") Signed-off-by:
-
Johan Hovold authored
Make sure to drop any reference taken by bus_find_device() in the sysfs callbacks that are used to create and destroy devices based on device-tree entries. Fixes: 6bccf755 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup") Signed-off-by:
-
Jack Miller authored
This condenses the opal node searching into a single function that finds all compatible nodes, instead of just searching the ibm,opal children, for ipmi, flash, and prd similar to how opal-i2c nodes are found. Signed-off-by:
Jack Miller <jack@codezen.org> Signed-off-by:
-
Michael Neuling authored
Load monitored is no longer supported on POWER9 so let's remove the code. This reverts commit bd3ea317 ("powerpc: Load Monitor Register Support"). Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Michael Neuling authored
Load monitored won't be supported in POWER9, so PPC_FEATURE2_ARCH_3_00 (in HWCAP2) will no longer imply Load monitor support. These Load monitored tests are enabled by PPC_FEATURE2_ARCH_3_00 so they are now bogus and need to be removed. This reverts commit 16c19a2e ("selftests/powerpc: Load Monitor Register Tests"). Signed-off-by:
-
Michael Ellerman authored
No one uses reiserfs much these days, or is likely to in future. So drop it from pseries and powernv defconfigs to save time and space. It's still enabled in ppc64_defconfig so we get some build coverage. Signed-off-by: -
Elimar Riesebieter authored
We can use the front led of powerbooks/ibooks to visualize disk activity without the deprecated IDE_GD_ATA. Signed-off-by:
Elimar Riesebieter <riesebie@lxtec.de> Signed-off-by:
-
Balbir Singh authored
In ISA v2.05, the tlbiel instruction takes two arguments, RB and L: tlbiel RB,L +---------+---------+----+---------+---------+---------+----+ | 31 | / | L | / | RB | 274 | / | | 31 - 26 | 25 - 22 | 21 | 20 - 16 | 15 - 11 | 10 - 1 | 0 | +---------+---------+----+---------+---------+---------+----+ In ISA v2.06 tlbiel takes only one argument, RB: tlbiel RB +---------+---------+---------+---------+---------+----+ | 31 | / | / | RB | 274 | / | | 31 - 26 | 25 - 21 | 20 - 16 | 15 - 11 | 10 - 1 | 0 | +---------+---------+---------+---------+---------+----+ And in ISA v3.00 tlbiel takes five arguments: tlbiel RB,RS,RIC,PRS,R +---------+---------+----+---------+----+----+---------+---------+----+ | 31 | RS | / | RIC |PRS | R | RB | 274 | / | | 31 - 26 | 25 - 21 | 20 | 19 - 18 | 17 | 16 | 15 - 11 | 10 - 1 | 0 | +---------+---------+----+---------+----+----+---------+---------+----+ However the assembler also accepts "tlbiel RB", and generates "tlbiel RB,r0,0,0,0". As you can see above the L field from the v2.05 encoding overlaps with the reserved field of the v2.06 encoding, and the low bit of the RS field of the v3.00 encoding. Currently in __tlbiel() we generate two tlbiel instructions manually using hex constants. In the first case, for MMU_PAGE_4K, we generate "tlbiel RB,0", which is safe in all cases, because the L bit is zero. However in the default case we generate "tlbiel RB,1", therefore setting bit 21 to 1. This is not an actual bug on v2.06 processors, because the CPU ignores the value of the reserved field. However software is supposed to encode the reserved fields as zero to enable forward compatibility. On v3.00 processors setting bit 21 to 1 and no other bits of RS, means we are using r1 for the value of RS. Although it's not obvious, the code sets the IS field (bits 10-11) to 0 (by omission), and L=1, in the va value, which is passed as RB. We also pass R=0 in the instruction. The combination of IS=0, L=1 and R=0 means the value of RS is not used, so even on ISA v3.00 there is no actual bug. We should still fix it, as setting a reserved bit on v2.06 is naughty, and we are only avoiding a bug on v3.00 by accident rather than design. Use ASM_FTR_IFSET() to generate the single argument form on ISA v2.06 and later, and the two argument form on pre v2.06. Although there may be very old toolchains which don't understand tlbiel, we have other code in the tree which has been using tlbiel for over five years, and no one has reported any build failures, so just let the assembler generate the instructions. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> [mpe: Rewrite change log, use IFSET instead of IFCLR] Signed-off-by:
-
Michael Ellerman authored
When we're not compiling for a specific CPU, ie. none of the CONFIG_POWERx_CPU options are set, and CONFIG_GENERIC_CPU *is* set, we currently don't pass any -mcpu option to the compiler. This means the compiler builds for a "generic" Power CPU. But back in 2014 we dropped support for pre power4 CPUs in commit 468a3302 ("powerpc: Drop support for pre-POWER4 cpus"). Given that, there's no point in building the kernel to run on pre power4 cpus. So update the flags we pass to the compiler when CONFIG_GENERIC_CPU is set, to specify -mcpu=power4. Signed-off-by:
-
Nicholas Piggin authored
This adds a config option that can help exercise the case when the kernel is not running at PAGE_OFFSET. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
-
Anton Blanchard authored
An hcall was recently added that does exactly what we need during kexec - it clears the entire MMU hash table, ignoring any VRMA mappings. Try it and fall back to the old method if we get a failure. On a POWER8 box with 5TB of memory, this reduces the time it takes to kexec a new kernel from from 4 minutes to 1 minute. Signed-off-by:
Anton Blanchard <anton@samba.org> Tested-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> [mpe: Split into separate functions and tweak function naming] Signed-off-by:
-
Denis Kirjanov authored
That's unclear why lockdep shows the following warning but adding a lockdep class to struct pmac_i2c_bus solves it [ 20.507795] ====================================================== [ 20.507796] [ INFO: possible circular locking dependency detected ] [ 20.507800] 4.8.0-rc7-00037-gd2ffb010 #21 Not tainted [ 20.507801] ------------------------------------------------------- [ 20.507803] swapper/0/1 is trying to acquire lock: [ 20.507818] (&bus->mutex){+.+.+.}, at: [<c000000000052830>] .pmac_i2c_open+0x30/0x100 [ 20.507819] [ 20.507819] but task is already holding lock: [ 20.507829] (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0 [ 20.507830] [ 20.507830] which lock already depends on the new lock. [ 20.507830] [ 20.507832] [ 20.507832] the existing dependency chain (in reverse order) is: [ 20.507837] [ 20.507837] -> #4 (&policy->rwsem){+.+.+.}: [ 20.507844] [<c00000000082385c>] .down_write+0x6c/0x110 [ 20.507849] [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0 [ 20.507855] [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110 [ 20.507860] [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250 [ 20.507866] [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28 [ 20.507872] [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0 [ 20.507878] [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c [ 20.507883] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.507887] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.507894] [ 20.507894] -> #3 (subsys mutex#2){+.+.+.}: [ 20.507899] [<c000000000820448>] .mutex_lock_nested+0xa8/0x590 [ 20.507903] [<c0000000004d7f24>] .bus_probe_device+0x44/0xe0 [ 20.507907] [<c0000000004d5208>] .device_add+0x508/0x730 [ 20.507911] [<c0000000004dd528>] .register_cpu+0x118/0x190 [ 20.507916] [<c000000000b14450>] .topology_init+0x148/0x248 [ 20.507921] [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0 [ 20.507925] [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c [ 20.507929] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.507934] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.507939] [ 20.507939] -> #2 (cpu_add_remove_lock){+.+.+.}: [ 20.507944] [<c000000000820448>] .mutex_lock_nested+0xa8/0x590 [ 20.507950] [<c000000000087a9c>] .register_cpu_notifier+0x2c/0x70 [ 20.507955] [<c000000000b267e0>] .spawn_ksoftirqd+0x18/0x4c [ 20.507959] [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0 [ 20.507964] [<c000000000b0f770>] .kernel_init_freeable+0xb0/0x28c [ 20.507968] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.507972] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.507978] [ 20.507978] -> #1 (&host->mutex){+.+.+.}: [ 20.507982] [<c000000000820448>] .mutex_lock_nested+0xa8/0x590 [ 20.507987] [<c0000000000527e8>] .kw_i2c_open+0x18/0x30 [ 20.507991] [<c000000000052894>] .pmac_i2c_open+0x94/0x100 [ 20.507995] [<c000000000b220a0>] .smp_core99_probe+0x260/0x410 [ 20.507999] [<c000000000b185bc>] .smp_prepare_cpus+0x280/0x2ac [ 20.508003] [<c000000000b0f748>] .kernel_init_freeable+0x88/0x28c [ 20.508008] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.508012] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.508018] [ 20.508018] -> #0 (&bus->mutex){+.+.+.}: [ 20.508023] [<c0000000000ed5b4>] .lock_acquire+0x84/0x100 [ 20.508027] [<c000000000820448>] .mutex_lock_nested+0xa8/0x590 [ 20.508032] [<c000000000052830>] .pmac_i2c_open+0x30/0x100 [ 20.508037] [<c000000000052e14>] .pmac_i2c_do_begin+0x34/0x120 [ 20.508040] [<c000000000056bc0>] .pmf_call_one+0x50/0xd0 [ 20.508045] [<c00000000068ff1c>] .g5_pfunc_switch_volt+0x2c/0xc0 [ 20.508050] [<c00000000068fecc>] .g5_pfunc_switch_freq+0x1cc/0x1f0 [ 20.508054] [<c00000000068fc2c>] .g5_cpufreq_target+0x2c/0x40 [ 20.508058] [<c0000000006873ec>] .__cpufreq_driver_target+0x23c/0x840 [ 20.508062] [<c00000000068c798>] .cpufreq_gov_performance_limits+0x18/0x30 [ 20.508067] [<c00000000068915c>] .cpufreq_start_governor+0xac/0x100 [ 20.508071] [<c00000000068a788>] .cpufreq_set_policy+0x208/0x260 [ 20.508076] [<c00000000068abdc>] .cpufreq_init_policy+0x6c/0xb0 [ 20.508081] [<c00000000068ae70>] .cpufreq_online+0x250/0x9d0 [ 20.508085] [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110 [ 20.508090] [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250 [ 20.508094] [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28 [ 20.508099] [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0 [ 20.508103] [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c [ 20.508107] [<c00000000000b3bc>] .kernel_init+0x1c/0x140 [ 20.508112] [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64 [ 20.508113] [ 20.508113] other info that might help us debug this: [ 20.508113] [ 20.508121] Chain exists of: [ 20.508121] &bus->mutex --> subsys mutex#2 --> &policy->rwsem [ 20.508121] [ 20.508123] Possible unsafe locking scenario: [ 20.508123] [ 20.508124] CPU0 CPU1 [ 20.508125] ---- ---- [ 20.508128] lock(&policy->rwsem); [ 20.508132] lock(subsys mutex#2); [ 20.508135] lock(&policy->rwsem); [ 20.508138] lock(&bus->mutex); [ 20.508139] [ 20.508139] *** DEADLOCK *** [ 20.508139] [ 20.508141] 3 locks held by swapper/0/1: [ 20.508150] #0: (cpu_hotplug.lock){++++++}, at: [<c000000000087838>] .get_online_cpus+0x48/0xc0 [ 20.508159] #1: (subsys mutex#2){+.+.+.}, at: [<c0000000004d7670>] .subsys_interface_register+0x50/0x110 [ 20.508168] #2: (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0 [ 20.508169] [ 20.508169] stack backtrace: [ 20.508173] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc7-00037-gd2ffb010 #21 [ 20.508175] Call Trace: [ 20.508180] [c0000000790c2b90] [c00000000082cc70] .dump_stack+0xe0/0x14c (unreliable) [ 20.508184] [c0000000790c2c20] [c000000000828c88] .print_circular_bug+0x350/0x388 [ 20.508188] [c0000000790c2cd0] [c0000000000ecb0c] .__lock_acquire+0x196c/0x1d30 [ 20.508192] [c0000000790c2e50] [c0000000000ed5b4] .lock_acquire+0x84/0x100 [ 20.508196] [c0000000790c2f20] [c000000000820448] .mutex_lock_nested+0xa8/0x590 [ 20.508201] [c0000000790c3030] [c000000000052830] .pmac_i2c_open+0x30/0x100 [ 20.508206] [c0000000790c30c0] [c000000000052e14] .pmac_i2c_do_begin+0x34/0x120 [ 20.508209] [c0000000790c3150] [c000000000056bc0] .pmf_call_one+0x50/0xd0 [ 20.508213] [c0000000790c31e0] [c00000000068ff1c] .g5_pfunc_switch_volt+0x2c/0xc0 [ 20.508217] [c0000000790c3250] [c00000000068fecc] .g5_pfunc_switch_freq+0x1cc/0x1f0 [ 20.508221] [c0000000790c3320] [c00000000068fc2c] .g5_cpufreq_target+0x2c/0x40 [ 20.508226] [c0000000790c3390] [c0000000006873ec] .__cpufreq_driver_target+0x23c/0x840 [ 20.508230] [c0000000790c3440] [c00000000068c798] .cpufreq_gov_performance_limits+0x18/0x30 [ 20.508235] [c0000000790c34b0] [c00000000068915c] .cpufreq_start_governor+0xac/0x100 [ 20.508239] [c0000000790c3530] [c00000000068a788] .cpufreq_set_policy+0x208/0x260 [ 20.508244] [c0000000790c35d0] [c00000000068abdc] .cpufreq_init_policy+0x6c/0xb0 [ 20.508249] [c0000000790c3940] [c00000000068ae70] .cpufreq_online+0x250/0x9d0 [ 20.508253] [c0000000790c3a30] [c0000000004d76d8] .subsys_interface_register+0xb8/0x110 [ 20.508258] [c0000000790c3ad0] [c000000000689bb0] .cpufreq_register_driver+0x1d0/0x250 [ 20.508262] [c0000000790c3b60] [c000000000b4f8f4] .g5_cpufreq_init+0x9cc/0xa28 [ 20.508267] [c0000000790c3c20] [c00000000000a98c] .do_one_initcall+0x5c/0x1d0 [ 20.508271] [c0000000790c3d00] [c000000000b0f86c] .kernel_init_freeable+0x1ac/0x28c [ 20.508276] [c0000000790c3db0] [c00000000000b3bc] .kernel_init+0x1c/0x140 [ 20.508280] [c0000000790c3e30] [c0000000000098f4] .ret_from_kernel_thread+0x58/0x64 Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
Nicholas Piggin authored
This halves the exception table size on 64-bit builds, and it allows build-time sorting of exception tables to work on relocated kernels. Signed-off-by:
-
Nicholas Piggin authored
This macro is taken from s390, and allows more flexibility in changing exception table format. mpe: Put it in ppc_asm.h and only define one version using stringinfy_in_c(). Add some empty definitions and headers to keep the selftests happy. Signed-off-by:
-
Michael Ellerman authored
If the result returned by load_unaligned_zeropad() doesn't match what we expect we should fail the test! Signed-off-by: -
Michael Ellerman authored
If the load unaligned zeropad test takes a SEGV which can't be handled, we increment segv_error, print the offending NIP and then return without taking any further action. In almost all cases this means we'll just take the SEGV again, and loop eternally spamming the console. Instead just abort(), it's a fatal error in the test. The test harness will notice that the child died and print a nice message for us. Signed-off-by: -
Michael Ellerman authored
We haven't seen these before, but the soon to be merged relative exception tables support causes them to be generated. Signed-off-by: -
Michael Ellerman authored
There's no reason to #error if we include ppc_asm.h in asm files, the ifdef already prevents any problems. Signed-off-by: -
Nicholas Piggin authored
Exception handlers are aligned to 128 bytes (L1 cache) on 64s, which is overkill. It can reduce the icache footprint of any individual exception path. However taken as a whole, the expansion in icache footprint seems likely to be counter-productive and cause more total misses. Create IFETCH_ALIGN_SHIFT/BYTES, which should give optimal ifetch alignment with much more reasonable alignment. This saves 1792 bytes from head_64.o text with an allmodconfig build. Other subarchitectures should define appropriate IFETCH_ALIGN_SHIFT values if this becomes more widely used. Signed-off-by:
-
Rui Teng authored
There are three #ifdef CONFIG_PPC_BOOK3E sections in nohash/64/pgtable.h. And there should be no configurations possible which use nohash/64/pgtable.h but don't also enable CONFIG_PPC_BOOK3E. Suggested-by:
Rui Teng <rui.teng@linux.vnet.ibm.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
Pull in a version of Anton's null_syscall benchmark: http://ozlabs.org/~anton/junkcode/null_syscall.cSuggested-by:
Anton Blanchard <anton@au.ibm.com> Signed-off-by:
-
- 13 Nov, 2016 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "ARM fixes. There are a couple pending x86 patches but they'll have to wait for next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs KVM: arm/arm64: vgic: Prevent access to invalid SPIs arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
-
Linus Torvalds authored
Merge media fixes from Mauro Carvalho Chehab: "This contains two patches fixing problems with my patch series meant to make USB drivers to work again after the DMA on stack changes. The last patch on this series is actually not related to DMA on stack. It solves a longstanding bug affecting module unload, causing module_put() to be called twice. It was reported by the user who reported and tested the issues with the gp8psk driver with the DMA fixup patches. As we're late at -rc cycle, maybe you prefer to not apply it right now. If this is the case, I'll add to the pile of patches for 4.10. Exceptionally this time, I'm sending the patches via e-mail, because I'm on another trip, and won't be able to use the usual procedure until Monday. Also, it is only three patches, and you followed already the discussions about the first one" * emailed patches from Mauro Carvalho Chehab <mchehab@osg.samsung.com>: gp8psk: Fix DVB frontend attach gp8psk: fix gp8psk_usb_in_op() logic dvb-usb: move data_mutex to struct dvb_usb_device
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are three small driver fixes for some reported issues for 4.9-rc5. One for the hyper-v subsystem, fixing up a naming issue that showed up in 4.9-rc1, one mei driver fix, and one fix for parallel ports, resolving a reported regression. All have been in linux-next with no reported issues" * tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ppdev: fix double-free of pp->pdev->name vmbus: make sysfs names consistent with PCI mei: bus: fix received data size check in NFC fixup
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are two driver core fixes for 4.9-rc5. The first resolves an issue with some drivers not liking to be unbound and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which solves some reported problems with graphics and storage drivers. The other resolves a smatch error with the 4.9-rc1 driver core changes around this feature. Both have been in linux-next with no reported issues" * tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: fix smatch warning on dev->bus check driver core: skip removal test for non-removable drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO fixes from Grek KH: "Here are a few small staging and iio driver fixes for reported issues. The last one was cherry-picked from my -next branch to resolve a build warning that Arnd fixed, in his quest to be able to turn -Wmaybe-uninitialized back on again. That patch, and all of the others, have been in linux-next for a while with no reported issues" * tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: maxim_thermocouple: detect invalid storage size in read() staging: nvec: remove managed resource from PS2 driver Revert "staging: nvec: ps2: change serio type to passthrough" drivers: staging: nvec: remove bogus reset command for PS/2 interface staging: greybus: arche-platform: fix device reference leak staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value staging: sm750fb: Fix bugs introduced by early commits iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation. iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) iio: st_sensors: fix scale configuration for h3lis331dl staging: iio: ad5933: avoid uninitialized variable in error case
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 4.9-rc5 Nothing major, just small fixes for reported issues, all of these have been in linux-next for a while with no reported issues" * tag 'usb-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: cdc-acm: fix TIOCMIWAIT cdc-acm: fix uninitialized variable drivers/usb: Skip auto handoff for TI and RENESAS usb controllers usb: musb: remove duplicated actions usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER phy: sun4i: check PMU presence when poking unknown bit of pmu phy-rockchip-pcie: remove deassert of phy_rst from exit callback phy: da8xx-usb: rename the ohci device to ohci-da8xx phy: Add reset callback for not generic phy uwb: fix device reference leaks usb: gadget: u_ether: remove interrupt throttling usb: dwc3: st: add missing <linux/pinctrl/consumer.h> include usb: dwc3: Fix error handling for core init
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block fixes from Jens Axboe: "Since I mistakenly left out the lightnvm regression fix yesterday and the aoeblk seems adequately tested at this point, might as well send out another pull to make -rc5" * 'for-linus' of git://git.kernel.dk/linux-block: aoe: fix crash in page count manipulation lightnvm: invalid offset calculation for lba_shift
-
