- 29 Aug, 2017 40 commits
-
-
Paul Burton authored
Introduce definitions & accessors for a selection of Coherence Manager (CM) & Cluster Power Controller (CPC) registers that are new with CM v3.5 & the MIPS I6500. These are primarily registers that will be used in supporting multiple CPU clusters. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17006/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Make use of the new change_*, set_* & clear_* accessor functions for CPS (CM, CPC & GIC) registers where doing so makes the code easier to read or shortens it without adversely affecting readability. Signed-off-by:
-
Paul Burton authored
For read-write registers introduce accessor functions that simplify the task of modifying a subset of bits within the register. set_* functions set bits to 1, clear_* functions clear bits to 0 & change_* functions set bits specified in a mask to an arbitrary value. Signed-off-by:
-
Paul Burton authored
Tidy up asm/mips-cpc.h in a similar way to what "MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts" did for asm/mips-cm.h. We use BIT() & GENMASK() to simplify the definition of register fields, drop the _SHF definitions since that information can be found in the _MSK ones, and then drop the _MSK suffix. Fields definitions are moved to be next to the appropriate register definition, making it easier to link the two & keep everything ordered by register address. Comments are added including the name of each register & a brief description of its purpose which helps to understand what registers are for, link them back to hardware documentation or grep for them. Signed-off-by:
-
Paul Burton authored
Switch the MIPS Cluster Power Controller (CPC) accessor functions to be generated by the new common Coherent Processing System (CPS) macros shared with the Coherence Manager (CM). Signed-off-by:
-
Paul Burton authored
There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803e ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: -
Paul Burton authored
Some CM registers are always 32 bits, or at least only use bits in the lower 32 bits of the register. For these registers it is wasteful for us to generate accessors which bother to check mips_cm_is64 & perform 64 bit accesses. This patch modifies the accessor generation to take into account the size of the register, and for 32 bit registers we generate accessors which only ever perform 32 bit accesses. For 64 bit registers we either perform a 64 bit access or two 32 bit accesses, depending upon the value of mips_cm_is64. Doing this saves us ~1.5KiB of code in a generic 64r6el kernel, and perhaps more importantly simplifies various code paths. This removes the read64_gcr_* accessors, so mips_cm_error_report() is modified to stop using them & instead use the regular read_gcr_* accessors which will return 64 bit values from the 64 bit registers. The new accessor macros are placed in asm/mips-cps.h such that they can be shared by CPC & GIC code in later patches. Signed-off-by:
-
Paul Burton authored
We currently have a mips_cm_base variable which holds the base address of the Coherence Manager (CM) Global Configuration Registers (GCRs), and accessor functions which use the GCR in their names. This works fine, but gets in the way of sharing the code to generate the accessor functions with other blocks (ie. CPC & GIC) because that code would then need to separately handle the name of the base address variable & the name used in the accessor functions. In order to prepare for sharing the accessor generation code between CM, CPC & GIC code this patch renames mips_cm_base to mips_gcr_base such that the "gcr" portion is common to both the base address variable & the accessor function names. Signed-off-by:
-
Aleksandar Markovic authored
Add FP emulation debugfs statistics for individual instructions. The debugfs files that contain counter values are placed in a separate directory called "instructions". This means that the default path for these new stat is "/sys/kernel/debug/mips/fpuemustats/instructions". Each instruction counter is mapped to the debugfs file that has the same name as instruction name. The lowercase is choosen as more commonly used case for instruction names. One example of usage: mips_host::/sys/kernel/debug/mips/fpuemustats/instructions # grep "" * The shortened output of this command is: abs.d:34 abs.s:5711 add.d:10401 add.s:399307 bc1eqz:3199 ... ... ... sub.s:167211 trunc.l.d:375 trunc.l.s:8054 trunc.w.d:421 trunc.w.s:27032 The limitation of this patch is that it handles R6 FP emulation instructions only. There are altogether 114 handled instructions. Signed-off-by:
Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by:
Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by:
Aleksandar Markovic <aleksandar.markovic@imgtec.com> Cc: Douglas Leung <douglas.leung@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Petar Jovanovic <petar.jovanovic@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17145/Signed-off-by:
-
Aleksandar Markovic authored
Add capability for the user to clear all FP emu debugfs counters. This is achieved by having a special debugfs file "fpuemustats_clear" (under default location "/sys/kernel/debug/mips"). Each access to the file results in setting all counters to zero (it is enough, let's say, to issue a "cat /sys/kernel/debug/mips/fpuemustats_clear"). This functionality already exists for R2 emulation statistics, but was missing for FP emulation statistics. The implementation in this patch is consistent with its R2 emulation counterpart. Signed-off-by:
-
Aleksandar Markovic authored
Add FP emu debugfs counter for branches. The new counter is displayed the same way as existing counter, and its default path is /sys/kernel/debug/mips/fpuemustats/. The limitation of this counter is that it counts only R6 branch instructions BC1NEZ and BC1EQZ. Signed-off-by:
-
Aleksandar Markovic authored
Fix content of CLASS.D output bits 32-63 to match hardware behavior. Prior to this patch, bits 32-63 of CLASS.D output were not initialized, causing different 32-63 bits content of CLASS.D, based on circumstances. However, the hardware consistently returns all these bits zeroed. The documentation is not clear whether these bits should be zero or unpredictable. Since technically "all zero" case still can be viewed as belonging to "unpredictable" class of results, it is better to zero bits 32-63. Signed-off-by:
-
Aleksandar Markovic authored
Reimplement RINT.<D|S> kernel emulation so that all RINT.<D|S> specifications are met. For the sake of simplicity, let's analyze RINT.S only. Prior to this patch, RINT.S emulation was essentially implemented as (in pseudocode) <output> = ieee754sp_flong(ieee754sp_tlong(<input>)), where ieee754sp_tlong() and ieee754sp_flong() are functions providing conversion from double to integer, and from integer to double, respectively. On surface, this implementation looks correct, but actually fails in many cases. Following problems were detected: 1. NaN and infinity cases will not be handled properly. The function ieee754sp_flong() never returns NaN nor infinity. 2. For RINT.S, for all inputs larger than LONG_MAX, and smaller than FLT_MAX, the result will be wrong, and the overflow exception will be erroneously set. A similar problem for negative inputs exists as well. 3. For some rounding modes, for some negative inputs close to zero, the return value will be zero, and should be -zero. This is because ieee754sp_flong() never returns -zero. This patch removes the problems above by implementing dedicated functions for RINT.<D|S> emulation. The core of the new function functionality is adapted version of the core of the function ieee754sp_tlong(). However, there are many details that are implemented to match RINT.<D|S> specification. It should be said that the functionality of ieee754sp_tlong() actually closely corresponds to CVT.L.S instruction, and it is used while emulating CVT.L.S. However, RINT.S and CVT.L.S instructions differ in many aspects. This patch fulfills missing support for RINT.<D|S>. Signed-off-by:
-
Aleksandar Markovic authored
Fix CMP.Sxxx.<D|S> SIGILL crashes by fixing main switch/case statement in fpu_emul() function so that inadvertent fall-troughs are prevented. Consider, let's say, CMP.SAF.S instruction when one of inputs is zero and another input is a signaling NaN. The desired output is zero, and the exception flag "invalid operation" set. For such case, the main portion of the implementation is within "d_fmt" case of the main "switch/case" statement in fpu_emul() function. The execution will follow one of "if-else" branches that doesn't contain "goto cop1scr;" statement, and will therefore reach the end of "d_fmt" case. It will subsequently fall through to the next case, "l_fmt". After following similar pattern, the execution will fall through to the succeeding case, which is "default". The "default" case contains "return SIGILL;" statement only. This means that the caller application will crash with "illegal instruction" message. It is obvious that above described fall-throughs are unnecessary and harmful. This patch rectifies that behavior by providing "break;" statements at the end of cases "d_fmt" and "l_fmt". There are 22 instructions affected by this problem: CMP.<SAF|SEQ|SLE|SLT|SNE|SOR|SUEQ|SULE|SULT|SUN|SUNE>.<D|S>. Signed-off-by:
-
Douglas Leung authored
Implement fused multiply-add with correct accuracy. Fused multiply-add operation has better accuracy than respective sequential execution of multiply and add operations applied on the same inputs. This is because accuracy errors accumulate in latter case. This patch implements fused multiply-add with the same accuracy as it is implemented in hardware, using 128-bit intermediate calculations. One test case example (raw bits) that this patch fixes: MADDF.D fd,fs,ft: fd = 0x00000ca000000000 fs = ft = 0x3f40624dd2f1a9fc Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Signed-off-by:
Douglas Leung <douglas.leung@imgtec.com> Signed-off-by:
-
Douglas Leung authored
Implement fused multiply-add with correct accuracy. Fused multiply-add operation has better accuracy than respective sequential execution of multiply and add operations applied on the same inputs. This is because accuracy errors accumulate in latter case. This patch implements fused multiply-add with the same accuracy as it is implemented in hardware, using 64-bit intermediate calculations. One test case example (raw bits) that this patch fixes: MADDF.S fd,fs,ft: fd = 0x22575225 fs = ft = 0x3727c5ac Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Signed-off-by:
-
Aleksandar Markovic authored
Fix definition and usage of "maddf_flags" enumeration. Avoid duplicate definition and apply more common capitalization. This patch does not change any scenario. It just makes MADDF and MSUBF emulation code more readable and easier to maintain, and hopefully prevents future bugs as well. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Bo Hu <bohu@google.com> Cc: Douglas Leung <douglas.leung@imgtec.com> Cc: Jin Qian <jinqian@google.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Petar Jovanovic <petar.jovanovic@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: <stable@vger.kernel.org> # 4.7+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16889/Signed-off-by:
-
Aleksandar Markovic authored
Fix the cases of <MADDF|MSUBF>.<D|S> when any of two multiplicands is +0 or -0, and the third input is also +0 or -0. Depending on the signs of inputs, certain special cases must be handled. A relevant example: MADDF.S fd,fs,ft: If fs contains +0.0, ft contains -0.0, and fd contains 0.0, fd is going to contain +0.0 (without this patch, it used to contain -0.0). Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Signed-off-by:
-
Aleksandar Markovic authored
Fix the cases of <MADDF|MSUBF>.<D|S> when any of two multiplicands is infinity. The correct behavior in such cases is affected by the nature of third input. Cases of addition of infinities with opposite signs and subtraction of infinities with same signs may arise and must be handles separately. Also, the value od flags argument (that determines whether the instruction is MADDF or MSUBF) affects the outcome. Relevant examples: MADDF.S fd,fs,ft: If fs contains +inf, ft contains +inf, and fd contains -inf, fd is going to contain indef (without this patch, it used to contain -inf). MSUBF.S fd,fs,ft: If fs contains +inf, ft contains 1.0, and fd contains +0.0, fd is going to contain -inf (without this patch, it used to contain +inf). Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Signed-off-by:
-
Aleksandar Markovic authored
Fix the cases of <MADDF|MSUBF>.<D|S> when any of three inputs is any NaN. Correct behavior of <MADDF|MSUBF>.<D|S> fd, fs, ft is following: - if any of inputs is sNaN, return a sNaN using following rules: if only one input is sNaN, return that one; if more than one input is sNaN, order of precedence for return value is fd, fs, ft - if no input is sNaN, but at least one of inputs is qNaN, return a qNaN using following rules: if only one input is qNaN, return that one; if more than one input is qNaN, order of precedence for return value is fd, fs, ft The previous code contained correct handling of some above cases, but not all. Also, such handling was scattered into various cases of "switch (CLPAIR(xc, yc))" statement, and elsewhere. With this patch, this logic is placed in one place, and "switch (CLPAIR(xc, yc))" is significantly simplified. A relevant example: MADDF.S fd,fs,ft: If fs contains qNaN1, ft contains qNaN2, and fd contains qNaN3, fd is going to contain qNaN3 (without this patch, it used to contain qNaN1). Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Signed-off-by: -
Aleksandar Markovic authored
Fix following special cases for MINA>.<D|S>: - if one of the inputs is zero, and the other is subnormal, normal, or infinity, the value of the former should be returned (that is, a zero). - if one of the inputs is infinity, and the other input is normal, or subnormal, the value of the latter should be returned. The previous implementation's logic for such cases was incorrect - it appears as if it implements MAXA, and not MINA instruction. A relevant example: MINA.S fd,fs,ft: If fs contains 100.0, and ft contains 0.0, fd is going to contain 0.0 (without this patch, it used to contain 100.0). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by: -
Aleksandar Markovic authored
Fix the value returned by <MAXA|MINA>.<D|S> fd,fs,ft, if both inputs are infinite. The previous implementation returned always the value contained in ft in such cases. The correct behavior is specified in Mips instruction set manual and is as follows: fs ft MAXA MINA --------------------------------- inf inf inf inf inf -inf inf -inf -inf inf inf -inf -inf -inf -inf -inf A relevant example: MAXA.S fd,fs,ft: If fs contains +inf, and ft contains -inf, fd is going to contain +inf (without this patch, it used to contain -inf). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by: -
Aleksandar Markovic authored
Fix the value returned by <MAXA|MINA>.<D|S>, if the inputs are normal fp numbers of the same absolute value, but opposite signs. A relevant example: MAXA.S fd,fs,ft: If fs contains -3.0, and ft contains +3.0, fd is going to contain +3.0 (without this patch, it used to contain -3.0). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by:
-
Aleksandar Markovic authored
Fix the value returned by <MAX|MIN>.<D|S>, if both inputs are negative normal fp numbers. The previous logic did not take into account that if both inputs have the same sign, there should be separate treatment of the cases when both inputs are negative and when both inputs are positive. A relevant example: MAX.S fd,fs,ft: If fs contains -5.0, and ft contains -7.0, fd is going to contain -5.0 (without this patch, it used to contain -7.0). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by:
-
Aleksandar Markovic authored
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S>, if both inputs are zeros. The right behavior in such cases is stated in instruction reference manual and is as follows: fs ft MAX MIN MAXA MINA --------------------------------------------- 0 0 0 0 0 0 0 -0 0 -0 0 -0 -0 0 0 -0 0 -0 -0 -0 -0 -0 -0 -0 Prior to this patch, some of the above cases were yielding correct results. However, for the sake of code consistency, all such cases are rewritten in this patch. A relevant example: MAX.S fd,fs,ft: If fs contains +0.0, and ft contains -0.0, fd is going to contain +0.0 (without this patch, it used to contain -0.0). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by: -
Aleksandar Markovic authored
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S> fd,fs,ft, if both inputs are quiet NaNs. The <MAX|MAXA|MIN|MINA>.<D|S> specifications state that the returned value in such cases should be the quiet NaN contained in register fs. A relevant example: MAX.S fd,fs,ft: If fs contains qNaN1, and ft contains qNaN2, fd is going to contain qNaN1 (without this patch, it used to contain qNaN2). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by:
-
Paul Burton authored
We currently have various variables & functions which are only used within a single translation unit, but which we don't declare static. This causes various sparse warnings of the form: arch/mips/kernel/mips-r2-to-r6-emul.c:49:1: warning: symbol 'mipsr2emustats' was not declared. Should it be static? arch/mips/kernel/unaligned.c:1381:11: warning: symbol 'reg16to32st' was not declared. Should it be static? arch/mips/mm/mmap.c:146:15: warning: symbol 'arch_mmap_rnd' was not declared. Should it be static? Fix these & others by declaring various affected variables & functions static, avoiding the sparse warnings & redundant symbols. [ralf@linux-mips.org: Add Marcin's build fix.] Signed-off-by: -
Paul Burton authored
The plat_timer_setup() function is entirely unused - nothing calls it, and no platforms provide it. Perhaps our dummy implementation was once useful as an aid in forward porting platforms, but its time has long since passed so let's remove the dead code. Signed-off-by:
-
Paul Burton authored
The __invalidate_kernel_vmap_range function pointer global variable isn't used anywhere. Remove it. Signed-off-by:
-
Paul Burton authored
The fault_addr argument to fpu_emulator_cop1Handler(), fpux_emu() and cop1Emulate() has up until now been declared as: void *__user *fault_addr This is essentially a pointer in user memory which points to a pointer to void. This is not the intent for our code, which is actually operating on a pointer to a pointer to void where the pointer to void is pointing at user memory. ie. the pointer is in kernel memory & points to user memory. This mismatch produces a lot of sparse warnings that look like this: arch/mips/math-emu/cp1emu.c:1485:45: warning: incorrect type in assignment (different address spaces) expected void *[noderef] <asn:1><noident> got unsigned int [noderef] [usertype] <asn:1>*[assigned] va Fix these by modifying the declaration of the fault_addr argument to: void __user **fault_addr Signed-off-by: -
Paul Burton authored
arch/mips/mm/init.c provides our implementation of free_initrd_mem(), but doesn't include the linux/initrd.h header which declares them. This leads to a warning from sparse: arch/mips/mm/init.c:501:6: warning: symbol 'free_initrd_mem' was not declared. Should it be static? Fix this by including linux/initrd.h to get the declaration of free_initrd_mem(). Signed-off-by: -
Paul Burton authored
arch/mips/mm/mmap.c provides our implementations of the arch_mmap_rnd() & arch_randomize_brk() functions, but doesn't include the linux/elf-randomize.h header which declares them. This leads to warnings from sparse: arch/mips/mm/mmap.c:146:15: warning: symbol 'arch_mmap_rnd' was not declared. Should it be static? arch/mips/mm/mmap.c:190:15: warning: symbol 'arch_randomize_brk' was not declared. Should it be static? Fix this by including linux/elf-randomize.h to get the declarations of arch_mmap_rnd() & arch_randomize_brk(). Signed-off-by: -
Paul Burton authored
arch/mips/lib/delay.c provides our implementations of the __delay(), __ndelay() & __udelay() functions, but doesn't include the asm/delay.h header which declares them. This leads to warnings from sparse: arch/mips/lib/delay.c:26:6: warning: symbol '__delay' was not declared. Should it be static? arch/mips/lib/delay.c:50:6: warning: symbol '__udelay' was not declared. Should it be static? arch/mips/lib/delay.c:58:6: warning: symbol '__ndelay' was not declared. Should it be static? To keep checkpatch happy was well, include <linux/delay.h> rather than <asm/delay.h> directly to get the declarations of __delay(), __ndelay() & __udelay(). [ralf@linux-mips.org: Fixed to include <linux/delay.h.] Signed-off-by: -
Paul Burton authored
arch/mips/kernel/idle.c provides our implementation of the arch_cpu_idle() function, but doesn't include the linux/cpu.h header which declares it. This leads to a warning from sparse: arch/mips/kernel/idle.c:256:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static? Fix this by including linux/cpu.h to get the declaration of arch_cpu_idle(). Signed-off-by: -
Paul Burton authored
arch/mips/mm/cache.c provides our implementation of the cpu_cache_init() function, but doesn't include the asm/setup.h header which declares it. This leads to a warning from sparse: arch/mips/mm/cache.c:274:6: warning: symbol 'cpu_cache_init' was not declared. Should it be static? Fix this by including asm/setup.h to get the declaration of cpu_cache_init(). Signed-off-by: -
Paul Burton authored
arch/mips/generic/irq.c provides implementations of the get_c0_compare_int() & get_c0_perfcount_int() functions, but doesn't include the asm/time.h header which declares them. This leads to warnings from sparse: arch/mips/generic/irq.c:36:5: warning: symbol 'get_c0_perfcount_int' was not declared. Should it be static? arch/mips/generic/irq.c:52:14: warning: symbol 'get_c0_compare_int' was not declared. Should it be static? Fix this by including asm/time.h to get the declarations of get_c0_compare_int() & get_c0_perfcount_int(). Signed-off-by: -
Paul Burton authored
arch/mips/generic/init.c provides an implementation of the plat_fdt_relocated() function, but doesn't include the asm/bootinfo.h header which declares it. This leads to a warning from sparse: arch/mips/generic/init.c:94:13: warning: symbol 'plat_fdt_relocated' was not declared. Should it be static? Fix this by including asm/bootinfo.h to get the declaration of plat_fdt_relocated(). We also #ifdef our definition of plat_fdt_relocated() such that it is only provided when CONFIG_RELOCATABLE is set, matching the header & avoiding the redundant function for non-relocatable kernels. Signed-off-by:
-
Christoph Hellwig authored
Besides eliminating lots of duplication this also allows allocations with the DMA_ATTR_NON_CONSISTENT to use the CMA allocator. Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17181/Signed-off-by:
-
Harvey Hunt authored
Create a defconfig for the Omega2+ that reaches userspace and allows use of the USB port. Signed-off-by:
Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17138/Signed-off-by:
-
Harvey Hunt authored
The Onion Omega2+ is an MT7688A based board that has 128MB RAM and multiple peripherals. The MT7688A is pin compatible with the MT7628A, although the former supports a 1T1R antenna whereas the MT7628A supports a 2R2T antenna. Signed-off-by:
-
