- 17 Jun, 2009 40 commits
-
-
Arnd Bergmann authored
With this change, the driver builds fine on Microblaze, which helps allyesconfig compile tests. I did not test sparc, but the change should have the same effect there. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Anatolij Gustschin <agust@denx.de> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Julian Calaby authored
The OpenFirmware part of this driver is uncompilable on SPARC due to it's dependance on several PPC specific functions. Restricting this to PPC to prevent these build errors: CC drivers/video/mb862xx/mb862xxfb.o drivers/video/mb862xx/mb862xxfb.c: In function 'of_platform_mb862xx_probe': drivers/video/mb862xx/mb862xxfb.c:559: error: implicit declaration of function 'of_address_to_resource' drivers/video/mb862xx/mb862xxfb.c:575: error: 'NO_IRQ' undeclared (first use in this function) drivers/video/mb862xx/mb862xxfb.c:575: error: (Each undeclared identifier is reported only once drivers/video/mb862xx/mb862xxfb.c:575: error: for each function it appears in.) This was found using randconfig builds. Signed-off-by:
Julian Calaby <julian.calaby@gmail.com> Signed-off-by:
-
InKi Dae authored
Add support for the ARGB1888 and ARGB4888 hardware to the Samsung SoC Framebuffer driver (s3c-fb.c). ARGB1888 and ARGB4888 is decided by var->transp.length and this variable is set by s3c_fb_check_var(). In s3c_fb_check_var(), if var->vits_per_pixel is 25 or 28, then var->transp.length would be 1 or 3. Therefore alpha mode(ARGB1888 or ARGB4888) could be decided through that variable. For using alpha mode, you need to set the following: This code should be added to your machine code as platform data. static struct s3c_fb_pd_win xxx_fb_win0 = { /* this is to ensure we use win0 */ .win_mode = { .pixclock = (8+8+8+240)*(38+4+38+400), .left_margin = 8, .right_margin = 8, .upper_margin = 38, .lower_margin = 38, .hsync_len = 8, .vsync_len = 4, .xres = 240, .yres = 400, }, .max_bpp = 32, .default_bpp = 24, }; static struct s3c_fb_pd_win xxx_fb_win1 = { .win_mode = { .pixclock = (8+8+8+240)*(38+4+38+400), .left_margin = 8, .right_margin = 8, .upper_margin = 38, .lower_margin = 38, .hsync_len = 8, .vsync_len = 4, .xres = 240, .yres = 400, }, .max_bpp = 32, .default_bpp = 28, }; static struct s3c_fb_platdata xxx_lcd_pdata __initdata = { .win[0] = &ncp_fb_win0, .win[1] = &ncp_fb_win1, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = xxx_fb_gpio_setup, }; s3c_fb_set_platdata(&xxx_lcd_pdata); The above code sets pixelformat for window0 layer to RGB888 and window1 layer to ARGB4888. Signed-off-by:InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kyungmin Park <kmpark@infradead.org> Signed-off-by:
-
Ben Nizette authored
AFAICT the code which checks that the requested pixclock value is within bounds is incorrect. It ensures that the lcdc core clock is at least (bytes per pixel) times higher than the pixel clock rather than just greater than or equal to. There are tighter restrictions on the pixclock value as a function of bus width for STN panels but even then it isn't a simple relationship as currently checked for. IMO either something like the below patch should be applied or else more detailed checking logic should be implemented which takes in to account the panel type as well. Signed-off-by:
Ben Nizette <bn@niasdigital.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Daniel Glockner <dg@emlix.com> Signed-off-by:
-
Krzysztof Helt authored
Use the framebuffer_alloc() function to allocate the fb_info structure so the structure is correctly initialized after allocation. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Krzysztof Helt authored
Use the framebuffer_alloc() function to allocate the fb_info structure so the structure is correctly initialized after allocation. Signed-off-by:
-
Krzysztof Helt authored
The removed assignment is done inside the framebuffer_alloc() earlier. Signed-off-by:
-
Paul Menzel authored
Signed-off-by:
Paul Menzel <paulepanter@users.sourceforge.net> Cc: Gerd Knorr <kraxel@goldbach.in-berlin.de> Cc: Nico Schmoigl <schmoigl@rumms.uni-mannheim.de> Signed-off-by:
-
Paul Menzel authored
This patch was taken from vga-sync-field version 0.0.3 [1][2]. [1] http://lowbyte.de/vga-sync-fields/vga-sync-fields-0.0.3.tgz [2] http://git.hellersdorfer-jugendchor.de/?p=3Dvga2scart.git;a=3Dcommit;h= =3Dc5c8ed6c51fc9879dbf38d8b91d5db6f4300ea03 Signed-off-by:
Thomas Hilber <sparkie@lowbyte.de> Signed-off-by:
-
Geert Uytterhoeven authored
Now we have __initconst, we can finally move the external declarations for the various Linux logo structures to <linux/linux_logo.h>. James' ack dates back to the previous submission (way to long ago), when the logos were still __initdata, which caused failures on some platforms with some toolchain versions. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by:
James Simmons <jsimmons@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Sam Ravnborg authored
The generated logo sources are not automatically regenerated if scripts/pnmtologo.c has changed. Add the missing dependency to fix this. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Tested-by:
-
Daniel Mack authored
The LIS302DL accelerometer chip has a 'click' feature which can be used to detect sudden motion on any of the three axis. Configuration data is passed via spi platform_data and no action is taken if that's not specified, so it won't harm any existing platform. To make the configuration effective, the IRQ lines need to be set up appropriately. This patch also adds a way to do that from board support code. The DD_* definitions were factored out to an own enum because they are specific to LIS3LV02D devices. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Acked-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
-
Eric Piel authored
Separate the 6710 and 6715, and set the right axis information for the 6715. Reported-by:
Isaac702 <isaac702@gmail.com> Add the 6930. Reported-by:
Christian Weidle <slateroni@gmail.com> Add the 2710. Reported-by:
Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by:
-
Eric Piel authored
Now that there is no need to hookup on the open/close of the joystick, it's possible to use the simplified interface input_polled_device, instead of creating our own kthread. [randy.dunlap@oracle.com: fix Kconfig] [randy.dunlap@oracle.com: fix Kconfig some more] Signed-off-by:
-
Eric Piel authored
After measurement on my laptop, it seems that turning off the device does not bring any energy saving (within 0.1W precision). So let's keep the device always on. It simplifies the code, and it avoids the problem of reading a wrong value sometimes just after turning the device on. Moreover, since commit ef2cfc79 had been too zealous, the device was actually never turned off anyway. This patch also restores the damages done by this commit concerning the initialisation/poweroff. Also do more clean up with the usage of the lis3_dev global variable. Signed-off-by:
-
Eric Piel authored
Can only unregister the misc device if it was registered before. Also remove debugging messages, which in addition were not properly formated. Signed-off-by:
-
Wolfram Strepp authored
Furthermore, notice that the initial checks: if (!node->rb_left) child = node->rb_right; else if (!node->rb_right) child = node->rb_left; else { ... } guarantee that old->rb_right is set in the final else branch, therefore we can omit checking that again. Signed-off-by:Wolfram Strepp <wstrepp@gmx.de> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Wolfram Strepp authored
There are two cases when a node, having 2 childs, is erased: 'normal case': the successor is not the right-hand-child of the node to be erased 'special case': the successor is the right-hand child of the node to be erased Here some ascii-art, with following symbols (referring to the code): O: node to be deleted N: the successor of O P: parent of N C: child of N L: some other node normal case: O N / \ / \ / \ / \ L \ L \ / \ P ----> / \ P / \ / \ / / N C \ / \ \ C / \ special case: O|P N / \ / \ / \ / \ L \ L \ / \ N ----> / C \ / \ \ C / \ Notice that for the special case we don't have to reconnect C to N. Signed-off-by: -
Wolfram Strepp authored
First, move some code around in order to make the next change more obvious. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
lkml is added to all CC lists via pattern matching on "THE REST" Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
These file patterns match all sources. By default, scripts/get_maintainers.pl excludes Linus Torvalds from the CC: list. Option --git-chief-penguins will include him. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
fixes git send-email with a cover letter Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Fixed bug introduced after using rfc822 address checking. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
support older versions of grep (use -E not -P) no need to return data in routine recent_git_signoffs Signed-off-by:
-
Joe Perches authored
Moved linux-kernel@vger.kernel.org to MAINTAINERS lkml will be added to all CC lists via F: pattern match Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Fix mailing lists that are described, but not "(subscriber-only)" Signed-off-by:
-
Zygo Blaxell authored
There is a call to write_lock() in gen_pool_destroy which is not balanced by any corresponding write_unlock(). This causes problems with preemption because the preemption-disable counter is incremented in the write_lock() call, but never decremented by any call to write_unlock(). This bug is gen_pool_destroy, and one of them is non-x86 arch-specific code. Signed-off-by:
Zygo Blaxell <zygo.blaxell@xandros.com> Cc: Jiri Kosina <trivial@kernel.org> Cc: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by:
-
Tomas Szepe authored
CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK. This makes it possible to run complete systems out of a CONFIG_BLOCK=n initramfs on current kernels again (this last worked on 2.6.27.*). Cc: <stable@kernel.org> Signed-off-by:
-
