- 08 May, 2020 13 commits
-
-
Darrick J. Wong authored
Quotaoff doesn't actually do anything, so take advantage of the commit_pass2 pointer being optional and get rid of the switch statement clause. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de>
-
Darrick J. Wong authored
Move the bmap update intent and intent-done pass2 commit code into the per-item source code files and use dispatch functions to call them. We do these one at a time because there's a lot of code to move. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
Move the refcount update intent and intent-done pass2 commit code into the per-item source code files and use dispatch functions to call them. We do these one at a time because there's a lot of code to move. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
Move the rmap update intent and intent-done pass2 commit code into the per-item source code files and use dispatch functions to call them. We do these one at a time because there's a lot of code to move. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
Move the extent free intent and intent-done pass2 commit code into the per-item source code files and use dispatch functions to call them. We do these one at a time because there's a lot of code to move. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
Move the log icreate item pass2 commit code into the per-item source code files and use the dispatch function to call it. We do these one at a time because there's a lot of code to move. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
Move the log dquot item pass2 commit code into the per-item source code files and use the dispatch function to call it. We do these one at a time because there's a lot of code to move. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
Move the log inode item pass2 commit code into the per-item source code files and use the dispatch function to call it. We do these one at a time because there's a lot of code to move. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
Move the log buffer item pass2 commit code into the per-item source code files and use the dispatch function to call it. We do these one at a time because there's a lot of code to move. No functional changes. Signed-off-by:
-
Darrick J. Wong authored
Move the pass1 commit code into the per-item source code files and use the dispatch function to call them. Signed-off-by:
-
Darrick J. Wong authored
Move the pass2 readhead code into the per-item source code files and use the dispatch function to call them. Signed-off-by:
-
Darrick J. Wong authored
Create a generic dispatch structure to delegate recovery of different log item types into various code modules. This will enable us to move code specific to a particular log item type out of xfs_log_recover.c and into the log item source. The first operation we virtualize is the log item sorting. Signed-off-by:
-
Darrick J. Wong authored
Remove the old typedefs. Signed-off-by:
-
- 07 May, 2020 17 commits
-
-
Brian Foster authored
iget_flags is unused in xfs_imap_to_bp(). Remove the parameter and fix up the callers. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Allison Collins <allison.henderson@oracle.com> Signed-off-by:
-
Brian Foster authored
Both types control shutdown messaging and neither is used in the current codebase. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Brian Foster authored
Introduce an error tag to randomly fail async buffer writes. This is primarily to facilitate testing of the XFS error configuration mechanism. Signed-off-by:
-
Brian Foster authored
The stale parameter was used to control the now unused shutdown parameter of xfs_trans_ail_remove(). Signed-off-by:
-
Brian Foster authored
Now that the functions and callers of xfs_trans_ail_[remove|delete]() have been fixed up appropriately, the only difference between the two is the shutdown behavior. There are only a few callers of the _remove() variant, so make the shutdown conditional on the parameter and combine the two functions. Suggested-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Brian Foster authored
The shutdown parameter of xfs_trans_ail_remove() is no longer used. The remaining callers use it for items that legitimately might not be in the AIL or from contexts where AIL state has already been checked. Remove the unnecessary parameter and fix up the callers. Signed-off-by:
-
Brian Foster authored
Various intent log items call xfs_trans_ail_remove() with a log I/O error shutdown type, but this helper historically checks whether an item is in the AIL before calling xfs_trans_ail_delete(). This means the shutdown check is essentially a no-op for users of xfs_trans_ail_remove(). It is possible that some items might not be AIL resident when the AIL remove attempt occurs, but this should be isolated to cases where the filesystem has already shutdown. For example, this includes abort of the transaction committing the intent and I/O error of the iclog buffer committing the intent to the log. Therefore, update these callsites to use xfs_trans_ail_delete() to provide AIL state validation for the common path of items being released and removed when associated done items commit to the physical log. Signed-off-by:
-
Brian Foster authored
Several callers acquire the lock just prior to the call. Callers that require ->ail_lock for other purposes already check IN_AIL state and thus don't require the additional shutdown check in the helper. Push the lock down into xfs_trans_ail_delete(), open code the instances that still acquire it, and remove the unnecessary ailp parameter. Signed-off-by:
-
Brian Foster authored
The dquot flush handler effectively aborts the dquot flush if the filesystem is already shut down, but doesn't actually shut down if the flush fails. Update xfs_qm_dqflush() to consistently abort the dquot flush and shutdown the fs if the flush fails with an unexpected error. Signed-off-by:
-
Brian Foster authored
The pre-flush dquot verification in xfs_qm_dqflush() duplicates the read verifier by checking the dquot in the on-disk buffer. Instead, verify the in-core variant before it is flushed to the buffer. Fixes: 7224fa48 ("xfs: add full xfs_dqblk verifier") Signed-off-by:
-
Brian Foster authored
At unmount time, XFS emits an alert for every in-core buffer that might have undergone a write error. In practice this behavior is probably reasonable given that the filesystem is likely short lived once I/O errors begin to occur consistently. Under certain test or otherwise expected error conditions, this can spam the logs and slow down the unmount. Now that we have a ratelimit mechanism specifically for buffer alerts, reuse it for the per-buffer alerts in xfs_wait_buftarg(). Also lift the final repair message out of the loop so it always prints and assert that the metadata error handling code has shut down the fs. Signed-off-by:
-
Brian Foster authored
XFS has some inconsistent log message rate limiting with respect to buffer alerts. The metadata I/O error notification uses the generic ratelimited alert, the buffer push code uses a custom rate limit and the similar quiesce time failure checks are not rate limited at all (when they should be). The custom rate limit defined in the buf item code is specifically crafted for buffer alerts. It is more aggressive than generic rate limiting code because it must accommodate a high frequency of I/O error events in a relative short timeframe. Factor out the custom rate limit state from the buf item code into a per-buftarg rate limit so various alerts are limited based on the target. Define a buffer alert helper function and use it for the buffer alerts that are already ratelimited. Signed-off-by:
-
Brian Foster authored
The buffer write failure flag is intended to control the internal write retry that XFS has historically implemented to help mitigate the severity of transient I/O errors. The flag is set when a buffer is resubmitted from the I/O completion path due to a previous failure. It is checked on subsequent I/O completions to skip the internal retry and fall through to the higher level configurable error handling mechanism. The flag is cleared in the synchronous and delwri submission paths and also checked in various places to log write failure messages. There are a couple minor problems with the current usage of this flag. One is that we issue an internal retry after every submission from xfsaild due to how delwri submission clears the flag. This results in double the expected or configured number of write attempts when under sustained failures. Another more subtle issue is that the flag is never cleared on successful I/O completion. This can cause xfs_wait_buftarg() to suggest that dirty buffers are being thrown away due to the existence of the flag, when the reality is that the flag might still be set because the write succeeded on the retry. Clear the write failure flag on successful I/O completion to address both of these problems. This means that the internal retry attempt occurs once since the last time a buffer write failed and that various other contexts only see the flag set when the immediately previous write attempt has failed. Signed-off-by:
-
Brian Foster authored
The shutdown check in xfs_iflush() duplicates checks down in the buffer code. If the fs is shut down, xfs_trans_read_buf_map() always returns an error and falls into the same error path. Remove the unnecessary check along with the warning in xfs_imap_to_bp() that generates excessive noise in the log if the fs is shut down. Signed-off-by:
-
Brian Foster authored
The inode flush code has several layers of error handling between the inode and cluster flushing code. If the inode flush fails before acquiring the backing buffer, the inode flush is aborted. If the cluster flush fails, the current inode flush is aborted and the cluster buffer is failed to handle the initial inode and any others that might have been attached before the error. Since xfs_iflush() is the only caller of xfs_iflush_cluster(), the error handling between the two can be condensed in the top-level function. If we update xfs_iflush_int() to always fall through to the log item update and attach the item completion handler to the buffer, any errors that occur after the first call to xfs_iflush_int() can be handled with a buffer I/O failure. Lift the error handling from xfs_iflush_cluster() into xfs_iflush() and consolidate with the existing error handling. This also replaces the need to release the buffer because failing the buffer with XBF_ASYNC drops the current reference. Signed-off-by:
-
Brian Foster authored
We use the same buffer I/O failure code in a few different places. It's not much code, but it's not necessarily self-explanatory. Factor it into a helper and document it in one place. Signed-off-by:
-
Brian Foster authored
Flush locked log items whose underlying buffers fail metadata writeback are tagged with a special flag to indicate that the flush lock is already held. This is currently implemented in the type specific ->iop_push() callback, but the processing required for such items is not type specific because we're only doing basic state management on the underlying buffer. Factor the failed log item handling out of the inode and dquot ->iop_push() callbacks and open code the buffer resubmit helper into a single helper called from xfsaild_push_item(). This provides a generic mechanism for handling failed metadata buffer writeback with a bit less code. Signed-off-by:
-
- 06 May, 2020 1 commit
-
-
Darrick J. Wong authored
Make sure we release resources properly if we cannot clean out the COW extents in preparation for an extent swap. Fixes: 96987eea ("xfs: cancel COW blocks before swapext") Signed-off-by:
-
- 04 May, 2020 9 commits
-
-
Ira Weiny authored
The functionality in xfs_diflags_to_linux() and xfs_diflags_to_iflags() are nearly identical. The only difference is that *_to_linux() is called after inode setup and disallows changing the DAX flag. Combining them can be done with a flag which indicates if this is the initial setup to allow the DAX flag to be properly set only at init time. So remove xfs_diflags_to_linux() and call the modified xfs_diflags_to_iflags() directly. While we are here simplify xfs_diflags_to_iflags() to take struct xfs_inode and use xfs_ip2xflags() to ensure future diflags are included correctly. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Ira Weiny authored
xfs_inode_supports_dax() should reflect if the inode can support DAX not that it is enabled for DAX. Change the use of xfs_inode_supports_dax() to reflect only if the inode and underlying storage support dax. Add a new function xfs_inode_should_enable_dax() which reflects if the inode should be enabled for DAX. Reviewed-by:
-
Ira Weiny authored
As agreed upon[1]. We make the dax mount option a tri-state. '-o dax' continues to operate the same. We add 'always', 'never', and 'inode' (default). [1] https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/Signed-off-by:
-
Ira Weiny authored
In prep for the new tri-state mount option which then introduces XFS_MOUNT_DAX_NEVER. Reviewed-by:
-
Ira Weiny authored
An earlier call of xfs_reinit_inode() from xfs_iget_cache_hit() already handles initialization of i_rwsem. Doing so again is unneeded. Reviewed-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Given how XFS is all based around btrees it doesn't make much sense to offer a totally generic state when we can just use the btree cursor. Signed-off-by:
-
Christoph Hellwig authored
All defer op instance place their own extension of the log item into the dfp_done field. Replace that with a xfs_log_item to improve type safety and make the code easier to follow. Also use the opportunity to improve the ->finish_item calling conventions to place the done log item as the higher level structure before the list_entry used for the individual items. Signed-off-by:
-
Christoph Hellwig authored
Split out a helper that operates on a single xfs_defer_pending structure to untangle the code. Signed-off-by:
-
