- 24 Aug, 2013 10 commits
-
-
Mats Randgaard authored
The bridge driver is only notified when the input status has changed since the previous interrupt. Signed-off-by:
Mats Randgaard <matrandg@cisco.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Martin Bugge authored
This patch fixes two errors that caused incorrect format detections: The first bug is in the calculation of the vertical backporch: the combined period of vsync and backporch must *exceed* a certain minimum value, and not be equal to it. The second bug is a rounding error in the reduced blanking calculation: expand the ideal_duty_cylce to be in parts per ten thousand to avoid rounding errors. Signed-off-by:
Martin Bugge <marbugge@cisco.com> Cc: Mats Randgaard <matrandg@cisco.com> Signed-off-by:
-
Ricardo Ribalda authored
When 2 devices are registered at the same time, in Part 2 both will get the same minor number, making Part6 crash, because it cannot create a create a device with a duplicated minor: [ 7.157648] ------------[ cut here ]------------ [ 7.157666] WARNING: at fs/sysfs/dir.c:530 sysfs_add_one+0xbd/0xe0() [ 7.157669] sysfs: cannot create duplicate filename '/dev/char/81:1' [ 7.157672] Modules linked in: qtec_xform(+) qt5023_video(+) videobuf2_vmalloc videobuf2_dma_sg videobuf2_memops videobuf2_core gpio_xilinx(+) qtec_white qtec_cmosis(+) qtec_pcie qt5023 [ 7.157694] CPU: 0 PID: 120 Comm: systemd-udevd Not tainted 3.10.0-qtec-standard #8 [ 7.157698] Hardware name: QTechnology QT5022/QT5022, BIOS PM_2.1.0.309 X64 05/23/2013 [ 7.157702] 0000000000000009 ffff8801788358e8 ffffffff8176c487 ffff880178835928 [ 7.157707] ffffffff8106f6f0 ffff880175759770 00000000ffffffef ffff880175759930 [ 7.157712] ffff8801788359e8 ffff880178bff000 ffff880175759930 ffff880178835988 [ 7.157718] Call Trace: [ 7.157728] [<ffffffff8176c487>] dump_stack+0x19/0x1b [ 7.157735] [<ffffffff8106f6f0>] warn_slowpath_common+0x70/0xa0 [ 7.157740] [<ffffffff8106f7d6>] warn_slowpath_fmt+0x46/0x50 [ 7.157746] [<ffffffff81324b35>] ? strlcat+0x65/0x90 [ 7.157750] [<ffffffff811d516d>] sysfs_add_one+0xbd/0xe0 [ 7.157755] [<ffffffff811d5c6b>] sysfs_do_create_link_sd+0xdb/0x200 [ 7.157760] [<ffffffff811d5db1>] sysfs_create_link+0x21/0x40 [ 7.157765] [<ffffffff813e277b>] device_add+0x21b/0x6d0 [ 7.157772] [<ffffffff813f2985>] ? pm_runtime_init+0xe5/0xf0 [ 7.157776] [<ffffffff813e2c4e>] device_register+0x1e/0x30 [ 7.157782] [<ffffffff8153e8c3>] __video_register_device+0x313/0x610 [ 7.157791] [<ffffffffa00957c5>] qtec_xform_probe+0x465/0x7a4 [qtec_xform] [ 7.157797] [<ffffffff813e7b13>] platform_drv_probe+0x43/0x80 [ 7.157802] [<ffffffff813e531a>] ? driver_sysfs_add+0x7a/0xb0 [ 7.157807] [<ffffffff813e584b>] driver_probe_device+0x8b/0x3a0 [ 7.157812] [<ffffffff813e5c0b>] __driver_attach+0xab/0xb0 [ 7.157816] [<ffffffff813e5b60>] ? driver_probe_device+0x3a0/0x3a0 [ 7.157820] [<ffffffff813e37fd>] bus_for_each_dev+0x5d/0xa0 [ 7.157825] [<ffffffff813e529e>] driver_attach+0x1e/0x20 [ 7.157829] [<ffffffff813e4d3e>] bus_add_driver+0x10e/0x280 [ 7.157833] [<ffffffffa0099000>] ? 0xffffffffa0098fff [ 7.157837] [<ffffffffa0099000>] ? 0xffffffffa0098fff [ 7.157842] [<ffffffff813e6317>] driver_register+0x77/0x170 [ 7.157848] [<ffffffff81151bcc>] ? __vunmap+0x9c/0x110 [ 7.157852] [<ffffffffa0099000>] ? 0xffffffffa0098fff [ 7.157857] [<ffffffff813e7236>] platform_driver_register+0x46/0x50 [ 7.157863] [<ffffffffa0099010>] qtec_xform_plat_driver_init+0x10/0x12 [qtec_xform] [ 7.157869] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [ 7.157875] [<ffffffff810cf1f1>] load_module+0x1a91/0x2630 [ 7.157880] [<ffffffff8133bee0>] ? ddebug_proc_show+0xe0/0xe0 [ 7.157887] [<ffffffff817760f2>] ? page_fault+0x22/0x30 [ 7.157892] [<ffffffff810cfe7a>] SyS_init_module+0xea/0x140 [ 7.157898] [<ffffffff8177e5b9>] tracesys+0xd0/0xd5 [ 7.157902] ---[ end trace 660cc3a65a4bf01b ]--- [ 7.157939] __video_register_device: device_register failed Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
-
Sylwester Nawrocki authored
Prevent following build warning: drivers/media/v4l2-core/v4l2-ctrls.c: In function v4l2_ctrl_new_std_menu: drivers/media/v4l2-core/v4l2-ctrls.c:1768:15: warning: 'qmenu_int_len' may be used uninitialized in this function Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Arun Kumar K <arun.kk@samsung.com> Signed-off-by:
-
Lad, Prabhakar authored
add OF support for the tvp7002 driver. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
This patch adds 'sync-on-green-active' property as part of endpoint property. Signed-off-by:
-
Fabio Estevam authored
When using devm_ioremap_resource(), we do not need to check the return value of platform_get_resource(), so just remove it. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Fabio Estevam authored
clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by:
-
Fabio Estevam authored
Some resources were not being released in the error path and some were released in the incorrect order. Signed-off-by:
-
Shaik Ameer Basha authored
When streamoff is called on the context and the context is added to the job_queue, 1] sometimes device_run receives the empty vb2 buffers (as v4l2_m2m_streamoff is dropping the ready queue). 2] sometimes v4l2_m2m_job_finish may not succeed as the m2m_dev->curr_ctx is made NULL in the v4l2_m2m_streamoff() The above points may stop the execution of the other queued contexts. This patch makes sure that before streamoff is executed on any context, that context should "not be running" or "not queued" in the job_queue. 1] If the current context is running, then abort job will be called. 2] If the current context is queued, then the context will be removed from the job_queue. Signed-off-by:
Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by:
-
- 23 Aug, 2013 3 commits
-
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’: drivers/media/v4l2-core/videobuf2-dma-contig.c:204: error: implicit declaration of function ‘dma_mmap_coherent’ drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’: drivers/media/v4l2-core/videobuf2-dma-contig.c:387: error: implicit declaration of function ‘dma_get_sgtable’ Commit da508f57 ("[media] media/v4l2: VIDEOBUF2_DMA_CONTIG should depend on HAS_DMA") added a dependency on HAS_DMA to VIDEO_SH_VEU, as it selects VIDEOBUF2_DMA_CONTIG. However, this got lost in the merge conflict resolution in commit df90e225 ("Merge branch 'devel-for-v3.10' into v4l_for_linus"). Re-add the dependency to fix this. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Johannes Erdfelt authored
The KWorld UB445-U is similar to the UB430-AF but with a Samsung S5H1411 frontend. Luckily all of the hardware is already well supported, just the device and USB ids need to be added to get it to work. Signed-off-by:
Johannes Erdfelt <johannes@erdfelt.com> Signed-off-by:
-
Juergen Lock authored
At least technisat-usb2.c doesn't set these... Signed-off-by:
Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by:
-
- 22 Aug, 2013 18 commits
-
-
Julia Lawall authored
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Bjørn Mork authored
GIT_AUTHOR_DATE=1376465691 I took a quick look at the code and wonder if the problem is caused by an initial zero statistics message? This is all just a wild guess, but if it is correct, then the attached untested patch might fix it... Bjørn >From d78a0599d5b5d4da384eae08bf7da316389dfbe5 Mon Sep 17 00:00:00 2001 ts_packets and ets_packets counters can be 0. Don't fall over if they are. Fixes: [ 846.851711] divide error: 0000 [#1] SMP [ 846.851806] Modules linked in: smsdvb dvb_core ir_lirc_codec lirc_dev ir_sanyo_decoder ir_mce_kbd_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_hauppauge smsusb smsmdtv rc_core pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) parport_pc ppdev lp parport cpufreq_userspace cpufreq_powersave cpufreq_stats cpufreq_conservative rfcomm bnep binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd dns_resolver fscache sunrpc ext4 jbd2 fuse tp_smapi(O) thinkpad_ec(O) loop firewire_sbp2 dm_crypt snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm thinkpad_acpi nvram snd_page_alloc hid_generic snd_seq_midi snd_seq_midi_event arc4 usbhid snd_rawmidi uvcvideo hid iwldvm coretemp kvm_intel mac8021 1 cdc_wdm [ 846.853477] cdc_acm snd_seq videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media kvm radeon r852 ttm joydev cdc_ether usbnet pcmcia mii sm_common nand btusb drm_kms_helper tpm_tis acpi_cpufreq bluetooth iwlwifi nand_ecc drm nand_ids i2c_i801 mtd snd_seq_device iTCO_wdt iTCO_vendor_support r592 memstick lpc_ich mperf tpm yenta_socket pcmcia_rsrc pcmcia_core cfg80211 snd_timer snd pcspkr i2c_algo_bit crc16 i2c_core tpm_bios processor mfd_core wmi psmouse mei_me rfkill mei serio_raw soundcore evdev battery button video ac microcode ext3 mbcache jbd md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod sd_mod cdrom crc_t10dif firewire_ohci sdhci_pci sdhci mmc_core firewire_core crc_itu_t thermal thermal_sys ahci libahci ehci_pci uhci_hcd ehci_hcd libata scsi_mod usbcore e1000 e usb_common [ 846.855310] ptp pps_core [ 846.855356] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10-2-amd64 #1 Debian 3.10.5-1 [ 846.855490] Hardware name: LENOVO 4061WFA/4061WFA, BIOS 6FET92WW (3.22 ) 12/14/2011 [ 846.855609] task: ffffffff81613400 ti: ffffffff81600000 task.ti: ffffffff81600000 [ 846.855636] RIP: 0010:[<ffffffffa092be0c>] [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb] [ 846.863906] RSP: 0018:ffff88013bc03cf0 EFLAGS: 00010046 [ 846.863906] RAX: 0000000000000000 RBX: ffff880133bf6000 RCX: 0000000000000000 [ 846.863906] RDX: 0000000000000000 RSI: ffff88005d3b58c0 RDI: ffff880133bf6000 [ 846.863906] RBP: ffff88005d1da000 R08: 0000000000000058 R09: 0000000000000015 [ 846.863906] R10: 0000000000001a0d R11: 000000000000021a R12: ffff88005d3b58c0 [ 846.863906] R13: ffff88005d1da008 R14: 00000000ffffff8d R15: ffff880036cf5060 [ 846.863906] FS: 0000000000000000(0000) GS:ffff88013bc00000(0000) knlGS:0000000000000000 [ 846.863906] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 846.863906] CR2: 00007f3a4b69ae50 CR3: 0000000036dac000 CR4: 00000000000407f0 [ 846.863906] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 846.863906] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 846.863906] Stack: [ 846.863906] ffff88007a102000 ffff88005d1da000 ffff88005d3b58c0 0000000000085824 [ 846.863906] ffffffffa08c5aa3 ffff88005d1da000 ffff8800a6907390 ffff8800a69073b0 [ 846.863906] ffff8800a6907000 ffffffffa08b642c 000000000000021a ffff8800a69073b0 [ 846.863906] Call Trace: [ 846.863906] <IRQ> [ 846.863906] [ 846.863906] [<ffffffffa08c5aa3>] ? smscore_onresponse+0x1d5/0x353 [smsmdtv] [ 846.863906] [<ffffffffa08b642c>] ? smsusb_onresponse+0x146/0x192 [smsusb] [ 846.863906] [<ffffffffa004cb1a>] ? usb_hcd_giveback_urb+0x6c/0xac [usbcore] [ 846.863906] [<ffffffffa0217be1>] ? ehci_urb_done+0x62/0x72 [ehci_hcd] [ 846.863906] [<ffffffffa0217c82>] ? qh_completions+0x91/0x364 [ehci_hcd] [ 846.863906] [<ffffffffa0219bba>] ? ehci_work+0x8a/0x68e [ehci_hcd] [ 846.863906] [<ffffffff8107336c>] ? timekeeping_get_ns.constprop.10+0xd/0x31 [ 846.863906] [<ffffffff81064d41>] ? update_cfs_rq_blocked_load+0xde/0xec [ 846.863906] [<ffffffff81058ec2>] ? run_posix_cpu_timers+0x25/0x575 [ 846.863906] [<ffffffffa021aa46>] ? ehci_irq+0x211/0x23d [ehci_hcd] [ 846.863906] [<ffffffffa004c0c1>] ? usb_hcd_irq+0x31/0x48 [usbcore] [ 846.863906] [<ffffffff810996fd>] ? handle_irq_event_percpu+0x49/0x1a4 [ 846.863906] [<ffffffff8109988a>] ? handle_irq_event+0x32/0x4b [ 846.863906] [<ffffffff8109bd76>] ? handle_fasteoi_irq+0x80/0xb6 [ 846.863906] [<ffffffff8100e93e>] ? handle_irq+0x18/0x20 [ 846.863906] [<ffffffff8100e657>] ? do_IRQ+0x40/0x95 [ 846.863906] [<ffffffff813883ed>] ? common_interrupt+0x6d/0x6d [ 846.863906] <EOI> [ 846.863906] [ 846.863906] [<ffffffff812a011c>] ? arch_local_irq_enable+0x4/0x8 [ 846.863906] [<ffffffff812a04f3>] ? cpuidle_enter_state+0x52/0xc1 [ 846.863906] [<ffffffff812a0636>] ? cpuidle_idle_call+0xd4/0x143 [ 846.863906] [<ffffffff8101398c>] ? arch_cpu_idle+0x5/0x17 [ 846.863906] [<ffffffff81072571>] ? cpu_startup_entry+0x10d/0x187 [ 846.863906] [<ffffffff816b3d3d>] ? start_kernel+0x3e8/0x3f3 [ 846.863906] [<ffffffff816b3777>] ? repair_env_string+0x54/0x54 [ 846.863906] [<ffffffff816b3598>] ? x86_64_start_kernel+0xf2/0xfd [ 846.863906] Code: 25 09 00 00 c6 83 da 08 00 00 03 8b 45 54 48 01 83 b6 08 00 00 8b 45 50 48 01 83 db 08 00 00 8b 4d 18 69 c1 ff ff 00 00 03 4d 14 <48> f7 f1 89 83 a8 09 00 00 e9 68 fe ff ff 48 8b 7f 10 e8 79 92 [ 846.863906] RIP [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb] [ 846.863906] RSP <ffff88013bc03cf0> Reference: http://bugs.debian.org/719623Reported-by:
Johannes Rohr <jorohr@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Mauro Carvalho Chehab authored
Those boards were missing the ISDB-T support. Most of the work on this patch were done by Alfredo. My work here were to port this patch from Kernel 3.2 to upstream, fix the issue caused by the set_frontend bad hook, and add the Kconfig bits. Tested on a X8502 board rebranded as: "Leadership - Placa PCI-e de Captura de Vídeo Híbrida" - product code 3800. Thanks-to: Alfredo Delaiti <alfredodelaiti@netscape.net> Tested-by:
Alfredo Delaiti <alfredodelaiti@netscape.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
changeset 768e6dad caused a regression on using mb86a20s in parallel mode, as the parallel mode selection got overriden by mb86a20s_init2. Cc: stable@vger.kernel.org Signed-off-by:
-
Mauro Carvalho Chehab authored
When the frontend drivers got converted to DVBv5 API, the original hook that tracked when a frontend is set got removed, being replaced by an approach that would use the gate control. That doesn't work fine with some boards. Also, the code were called more times than desired. Replace it by a logic that will hook the dvb set_frontend ops, with works with both DVBv3 and DVBv5 calls. Tested on a Mygica X8502 OEM board. Tested-by:
-
Laurent Pinchart authored
Add a maintainers entry for the Aptina PLL library, and rename the Aptina sensors entries to make it clear they refer to Aptina camera sensors. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The two operations are very similar, refactor most of the code in a helper function. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Laurent Pinchart authored
Commit b037c0fd ("media: vb2: fix potential deadlock in mmap vs. get_userptr handling") fixes an AB-BA deadlock related to the mmap_sem and driver locks. The same deadlock can occur in vb2_prepare_buffer(), fix it the same way. Signed-off-by:
-
Sean Young authored
Note that with the rc-feedback trigger, the cir-rx trigger is now redundant. The cir-tx trigger is not used by default; if this functionality is desired then it should exist in rc-core, not in a driver. Also make sure that the led is suspended on suspend. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
Sean Young authored
Signed-off-by:
-
Sean Young authored
Signed-off-by:
-
Sean Young authored
Many devices with an ir receiver also have a feedback led. Add the led trigger to support this. Signed-off-by:
-
Sean Young authored
The length in the header excludes the header itself, so we're getting spurious readings. Signed-off-by:
-
Sakari Ailus authored
As the clock framework makes it possible to assign a device specific name to the clocks, remove the ability to use a named clock in the driver. Signed-off-by:
-
Sakari Ailus authored
Prepare clocks before enabling and unprepare after disabling them. Signed-off-by:
-
Sakari Ailus authored
The PLL calculation heuristics is rather complicated and and is often difficult to understand to its original author. Signed-off-by:
-
Andy Shevchenko authored
clamp_t does the job to put a variable into the given range. clamp_t -> clamp as agreed with Andy. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Laurent Pinchart authored
Configure the device external clock using the common clock framework instead of a board code callback function. Signed-off-by:
-
- 21 Aug, 2013 4 commits
-
-
Ondrej Zary authored
Hello, this is a new gspca driver for Syntek STK1135 webcams. The code is completely new, but register values are based on Syntekdriver (stk11xx) by Nicolas VIVIEN (http://syntekdriver.sourceforge.net). Only one webcam type is supported now - vendor 0x174f, device 0x6a31. It's Asus F5RL laptop flippable webcam with MT9M112. The camera works better than in Windows - initializes much faster and provides more resolutions (the sensor can do almost any resolution - just add it to the stk1135_modes[] - could this feature be somehow used by applications to avoid SW scaling?). Autoflip works too - when the camera is flipped around, the image is flipped automatically. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Antonio Ospite authored
sd_start() operates on device controls but after the conversion to the v4l2 control framework in commits 62bba5dd and 1bd7d6ad controls are initialized in sd_init_controls() which is called _after_ sd_init(): The change fixes a NULL pointer dereference for Hercules Blog Webcam; the problem is observable since 3.6: gspca_main: v2.14.0 registered gspca_main: ov534-2.14.0 probing 06f8:3002 BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [<ffffffffa03c1b01>] v4l2_ctrl_g_ctrl+0x11/0x60 [videodev] PGD 0 Oops: 0000 [#1] SMP Modules linked in: gspca_ov534(+) gspca_main videodev rfcomm bnep ppdev bluetooth binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek stir4200 irda crc_ccitt usblp snd_hda_intel snd_hda_codec snd_hwdep snd_pcm hid_generic snd_page_alloc snd_seq_midi snd_seq_midi_event usbhid snd_rawmidi snd_seq snd_seq_device snd_timer hid i915 snd psmouse drm_kms_helper serio_raw mei_me drm mei soundcore video i2c_algo_bit lpc_ich mac_hid coretemp lp parport firewire_ohci firewire_core crc_itu_t ahci libahci alx mdio r8169 mii [last unloaded: parport_pc] CPU: 3 PID: 4352 Comm: modprobe Not tainted 3.11.0-031100rc2-generic #201307211535 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F9 09/19/2012 task: ffff8801c20f9770 ti: ffff8801ceaa0000 task.ti: ffff8801ceaa0000 RIP: 0010:[<ffffffffa03c1b01>] [<ffffffffa03c1b01>] v4l2_ctrl_g_ctrl+0x11/0x60 [videodev] RSP: 0018:ffff8801ceaa1af8 EFLAGS: 00010292 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 000000000001988b RDX: 000000000001988a RSI: ffffffffa032745a RDI: 0000000000000000 RBP: ffff8801ceaa1b28 R08: 0000000000017380 R09: ffffea0008419d80 R10: ffffffff81538f5a R11: 0000000000000002 R12: ffffffffa03273dc R13: ffffffffa03273dc R14: 0000000000000000 R15: ffffffffa03270a0 FS: 00007f72d564a740(0000) GS:ffff88021f380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000001bd1f0000 CR4: 00000000001407e0 Stack: ffff8801ceaa1b28 ffffffffa0325cff ffff8801000001f4 ffff8801ceb44000 ffffffffa03273dc ffff8801ceb44000 ffff8801ceaa1b58 ffffffffa032688e ffff8801ceb44000 ffffffffa03274f0 ffffffffa03274f0 ffff8801ceb44380 Call Trace: [<ffffffffa0325cff>] ? sccb_w_array+0x3f/0x80 [gspca_ov534] [<ffffffffa032688e>] sd_start+0xce/0x2b0 [gspca_ov534] [<ffffffffa0326bf9>] sd_init+0x189/0x1e8 [gspca_ov534] [<ffffffffa02a0c95>] gspca_dev_probe2+0x285/0x410 [gspca_main] [<ffffffffa02a0e58>] gspca_dev_probe+0x38/0x60 [gspca_main] [<ffffffffa0325081>] sd_probe+0x21/0x30 [gspca_ov534] [<ffffffff8153c960>] usb_probe_interface+0x1c0/0x2f0 [<ffffffff8148758c>] really_probe+0x6c/0x330 [<ffffffff814879d7>] driver_probe_device+0x47/0xa0 [<ffffffff81487adb>] __driver_attach+0xab/0xb0 [<ffffffff81487a30>] ? driver_probe_device+0xa0/0xa0 [<ffffffff814857be>] bus_for_each_dev+0x5e/0x90 [<ffffffff8148714e>] driver_attach+0x1e/0x20 [<ffffffff81486bdc>] bus_add_driver+0x10c/0x290 [<ffffffff8148805d>] driver_register+0x7d/0x160 [<ffffffff8153b590>] usb_register_driver+0xa0/0x160 [<ffffffffa0067000>] ? 0xffffffffa0066fff [<ffffffffa006701e>] sd_driver_init+0x1e/0x1000 [gspca_ov534] [<ffffffff8100212a>] do_one_initcall+0xfa/0x1b0 [<ffffffff810578c3>] ? set_memory_nx+0x43/0x50 [<ffffffff81712e8d>] do_init_module+0x80/0x1d1 [<ffffffff810d2079>] load_module+0x4c9/0x5f0 [<ffffffff810cf7b0>] ? add_kallsyms+0x210/0x210 [<ffffffff810d2254>] SyS_init_module+0xb4/0x100 [<ffffffff817333ef>] tracesys+0xe1/0xe6 Code: a0 09 00 00 48 c7 c7 30 c3 3c a0 e8 7a 38 ca e0 eb cf 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 28 <8b> 47 50 83 e8 05 83 f8 02 77 09 80 b8 20 8c 3c a0 00 74 1d 48 RIP [<ffffffffa03c1b01>] v4l2_ctrl_g_ctrl+0x11/0x60 [videodev] RSP <ffff8801ceaa1af8> CR2: 0000000000000050 ---[ end trace 6786f15abfd2ac90 ]--- Original bug report from: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173723/Signed-off-by:
Antonio Ospite <ospite@studenti.unina.it> Tested-by:
Yaroslav Zakharuk <slavikz@gmail.com> Signed-off-by:
-
Alexey Khoroshilov authored
If v4l2_fh_open() fails in dev_open(), gspca_dev->module left locked. The patch adds module_put(gspca_dev->module) on this path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Hans de Goede authored
We've an user reporting a device with a software version of 0, which works fine. Once we lower the version check to accept version 0 it becomes a nop, so remove it completely. Signed-off-by:
-
- 20 Aug, 2013 5 commits
-
-
Antti Palosaari authored
* Fix AM_MODE. Now it could work at least in theory, cannot test. * Use greatest common divisor algo to divide PLL fractional parts. * Fix IF frequency mode. * + some very minor "style" issues Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
After feeding different signal levels using RF generator and looking GNU Radio FFT sink I made decision to change bit shift 3 to bit shift 2 as there was very (too) huge visible leap in FFT sink GUI. Now it looks more natural. Signed-off-by:
-
Antti Palosaari authored
That stream format carries 504 x I+Q samples per 1024 USB frame. Sample resolution is 8-bit signed. Default it when sampling rate is 9Msps or over. Signed-off-by:
-
Antti Palosaari authored
Add comments, remove useless code and so. House cleaning party. Signed-off-by:
-
Antti Palosaari authored
I made some tuner freq limit tests against RF signal generator. Adjust some PLL limits according to these test results. Here are the results, taken from two different devices. Ranges are measured RF limits + calculated VCO limits. Mirics MSi3101 SDR Dongle: VHF_MODE 52 - 132 1664 - 4224 B3_MODE 103 - 263 1648 - 4208 B45_MODE 413 - 960 1652 - 3840 Hauppauge WinTV 133559 LF: VHF_MODE 49 - 130 1568 - 4160 B3_MODE 98 - 259 1568 - 4144 B45_MODE 391 - 960 1564 - 3840 Signed-off-by:
-
