- 07 Jul, 2009 11 commits
-
-
Heiko Carstens authored
Performance counters need 64 bit atomic operations. To keep the patch small we use the simple generic atomic64_t implementation. The native implementation follows with the next kernel. Fixes this build bug: In file included from kernel/sched.c:42: include/linux/perf_counter.h:427: error: expected specifier-qualifier-list before 'atomic64_t' Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Christian Borntraeger authored
From: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
The frame pointer is useless for s390 in the sched.c code. Signed-off-by: -
Heiko Carstens authored
Provide __ucmpdi2() helper function on 31 bit so we don't run again and again in compile errors like this one: kernel/built-in.o: In function `T.689': perf_counter.c:(.text+0x56c86): undefined reference to `__ucmpdi2' Signed-off-by:
-
Heiko Carstens authored
Add PERF_COUNTER_INDEX_OFFSET define to fix this build bug: kernel/perf_counter.c: In function 'perf_counter_index': kernel/perf_counter.c:1889: error: 'PERF_COUNTER_INDEX_OFFSET' undeclared Same fix as for FRV since s390 doesn't support hw counters. Signed-off-by:
-
Frank Munzert authored
We always returned -EINVAL when setting of a shutdown action failed. This was misleading, if for example the hardware did not support the shutdown action. Now we save each shutdown action's init return code and return it when the action is being set. Signed-off-by:
Frank Munzert <munzert@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
remove loop, add some debug data and use get_sense function Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Our udelay implementation enables interrupts to receive a special timer interrupt regardless of the context it is called from. This might lead to false positive lockdep reports. Since lockdep isn't aware of the fact that only a single interrupt source is enabled it warns about possible deadlocks that in reality won't happen, like the one below. To fix this disable lockdep before enabling interrupts. [ 254.040888] ================================= [ 254.040904] [ INFO: inconsistent lock state ] [ 254.040910] 2.6.30 #9 [ 254.040914] --------------------------------- [ 254.040920] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 254.040927] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 254.040934] (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0 [ 254.040961] {IN-HARDIRQ-W} state was registered at: [ 254.040969] [<0000000000096f74>] __lock_acquire+0x9d4/0x188c [ 254.040985] [<0000000000097f68>] lock_acquire+0x13c/0x16c [ 254.040998] [<00000000004527e0>] _spin_lock+0x74/0xb8 [ 254.041016] [<0000000000457eb2>] do_IRQ+0xde/0x208 [ 254.041031] [<000000000002d190>] io_return+0x0/0x8 [ 254.041049] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114 [ 254.041066] irq event stamp: 259629 [ 254.041076] hardirqs last enabled at (259628): [<000000000045238e>] _spin_unlock_irq+0x5e/0x9c [ 254.041095] hardirqs last disabled at (259629): [<000000000045292e>] _spin_lock_irq+0x4a/0xc4 [ 254.041126] softirqs last enabled at (259614): [<000000000006500e>] __do_softirq+0x296/0x2b0 [ 254.041137] softirqs last disabled at (259619): [<0000000000024cf6>] do_softirq+0x102/0x108 [ 254.041147] [ 254.041148] other info that might help us debug this: [ 254.041153] 2 locks held by swapper/0: [ 254.041157] #0: (&priv->timer){+.-...}, at: [<000000000006bf9a>] run_timer_softirq+0x19a/0x340 [ 254.041170] #1: (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0 [ 254.041182] [ 254.041310] Call Trace: [ 254.041313] ([<00000000000174fc>] show_trace+0x16c/0x170) [ 254.041321] [<0000000000017578>] show_stack+0x78/0x104 [ 254.041327] [<000000000044d0ca>] dump_stack+0xc6/0xd4 [ 254.041342] [<00000000000949b4>] print_usage_bug+0x1c8/0x1fc [ 254.041353] [<0000000000094e8a>] mark_lock+0x4a2/0x670 [ 254.041364] [<00000000000950e2>] mark_held_locks+0x8a/0xb4 [ 254.041375] [<0000000000095398>] trace_hardirqs_on_caller+0x74/0x1ac [ 254.041388] [<00000000000954fa>] trace_hardirqs_on+0x2a/0x38 [ 254.041402] [<000000000025f1ec>] __udelay_disabled+0xac/0xfc [ 254.041419] [<000000000025f432>] __udelay+0x12a/0x148 [ 254.041433] [<00000000002d64d8>] cio_commit_config+0x170/0x290 [ 254.041451] [<00000000002d6978>] cio_disable_subchannel+0x120/0x1cc [ 254.041468] [<00000000002e32a4>] ccw_device_recog_done+0x54/0x2f4 [ 254.041485] [<00000000002e3638>] ccw_device_sense_id_done+0x50/0x90 [ 254.041508] [<00000000002e615a>] snsid_callback+0xfa/0x3a8 [ 254.041515] [<00000000002dd96c>] ccwreq_stop+0x80/0x90 [ 254.041523] [<00000000002dda8e>] ccw_request_timeout+0xc2/0xd0 [ 254.041530] [<00000000002e2f70>] ccw_device_request_event+0x58/0x90 [ 254.041537] [<00000000002e47ae>] ccw_device_timeout+0x7e/0x2f0 [ 254.041555] [<000000000006c02a>] run_timer_softirq+0x22a/0x340 [ 254.041566] [<0000000000064eb0>] __do_softirq+0x138/0x2b0 [ 254.041578] [<0000000000024cf6>] do_softirq+0x102/0x108 [ 254.041590] [<00000000000647ce>] irq_exit+0xee/0x114 [ 254.041603] [<0000000000457d88>] do_extint+0x130/0x17c [ 254.041617] [<000000000002d41e>] ext_no_vtime+0x1e/0x22 [ 254.041631] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114 [ 254.041646] ([<0000000000029f58>] vtime_stop_cpu+0x6c/0x114) [ 254.041662] [<000000000001d842>] cpu_idle+0x122/0x1c0 [ 254.041679] [<00000000004482c6>] start_secondary+0xce/0xe0 [ 254.041696] [<0000000000000000>] 0x0 [ 254.041715] [<0000000000000000>] 0x0 [ 254.041745] INFO: lockdep is turned off. Signed-off-by: -
Heiko Carstens authored
Fix this: drivers/s390/char/monreader.c: In function 'mon_open': drivers/s390/char/monreader.c:323: warning: passing argument 1 of 'dev_set_drvdata' from incompatible pointer type include/linux/device.h:457: note: expected 'struct device *' but argument is of type 'struct device **' drivers/s390/char/monreader.c: In function 'monreader_freeze': drivers/s390/char/monreader.c:466: warning: passing argument 1 of 'dev_get_drvdata' from incompatible pointer type include/linux/device.h:452: note: expected 'const struct device *' but argument is of type 'struct device **' Signed-off-by:
-
Heiko Carstens authored
Define an empty static inline version of sclp_console_pm_event() to fix the build error below for !SCLP_CONSOLE. drivers/s390/built-in.o: In function `sclp_rw_pm_event': sclp_rw.c:(.text+0x12f68): undefined reference to `sclp_console_pm_event' Signed-off-by:
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix usage of bios intcall() x86: Remove unused function lapic_watchdog_ok() x86: Remove unused variable disable_x2apic x86, kvm: Fix section mismatches in kvm.c x86: Add missing annotation to arch/x86/lib/copy_user_64.S::copy_to_user x86: Fix fixmap page order for FIX_TEXT_POKE0,1 amd-iommu: set evt_buf_size correctly amd-iommu: handle alias entries correctly in init code x86: Fix printk call in print_local_apic() x86: Declare check_efer() before it gets used x86: Mark device_nb as static and fix NULL noise x86: Remove double declaration of MSR_P6_EVNTSEL0 and MSR_P6_EVNTSEL1 xen: Use kcalloc() in xen_init_IRQ() x86: Fix fixmap ordering x86: Fix symbol annotation for arch/x86/lib/clear_page_64.S::clear_page_c
-
- 06 Jul, 2009 29 commits
-
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] amba: fix amba device resources [ARM] pgtable: file pte layout documentation [ARM] pgtable: swp pte layout documentation, definitions, and check [ARM] export __cpu_flush_dcache_page [ARM] 5576/1: Update kb9202_defconfig [ARM] 5581/1: U300 clock updates [ARM] 5579/1: Updated U300 defconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: Revert "ide: improve handling of Power Management requests"
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (39 commits) Revert "p54: Use SKB list handling helpers instead of by-hand code." sctp: fix warning at inet_sock_destruct() while release sctp socket tun/tap: Fix crashes if open() /dev/net/tun and then poll() it. dsa: fix 88e6xxx statistics counter snapshotting forcedeth: Fix NAPI race. drivers/net/smsc911x.c: Fix resource size off by 1 error pcnet_cs: add new id bnx2x: Fix the maximal values of coalescing timeouts. bnx2x: Disable HC coalescing when setting timeout to zero. tun: Fix device unregister race be2net: fix spurious interrupt handling in intx mode e1000e: disable K1 at 1000Mbps for 82577/82578 e1000e: delay second read of PHY_STATUS register on failure of first read e1000e: prevent NVM corruption on sectors larger than 4K e1000e: do not write SmartSpeed register bits on parts without support e1000e: delay after LCD reset and proper checks for PHY configuration done e1000e: PHY loopback broken on 82578 ixgbe: Not allow 8259x unsupported wol options change from ethtool ixgbe: fix inconsistent SFP/SFP+ failure results. ixgbe: fix regression on some 82598 adapters ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Fix IRQ swizzling for ARI-enabled devices ia64/PCI: adjust section annotation for pcibios_setup() x86/PCI: get root CRS before scanning children x86/PCI: fix boundary checking when using root CRS PCI MSI: Fix restoration of MSI/MSI-X mask states in suspend/resume PCI MSI: Unmask MSI if setup failed PCI MSI: shorten PCI_MSIX_ENTRY_* symbol names PCI: make pci_name() take const argument PCI: More PATA quirks for not entering D3 PCI: fix kernel-doc warnings PCI: check if bus has a proper bridge device before triggering SBR PCI: remove pci_dac_dma_... APIs on mn10300 PCI ECRC: Remove unnecessary semicolons PCI MSI: Return if alloc_msi_entry for MSI-X failed
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix cast warning for init.c microblaze: Wire up new syscalls microblaze: use generic syscalls.h microblaze: clean up signal handling microblaze: convert all simple headers to use asm-generic microblaze: use the generic lib/checksum.c microblaze: fall back on generic header files for the ABI
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: SLAB: Fix lockdep annotations fix RCU-callback-after-kmem_cache_destroy problem in sl[aou]b
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (25 commits) V4L/DVB (12206): get_dvb_firmware: Correct errors in MPC718 firmware extraction logic V4L/DVB (12203): radio-si470x: fix lock imbalance V4L/DVB (12202): em28xx, fix lock imbalance V4L/DVB (12172): em28xx: Add autodetection code for Silvercrest 1.3 mpix V4L/DVB (12171): em28xx: fix webcam usage with different output formats V4L/DVB (12169): em28xx-video: fix VIDIOC_G_FMT and VIDIOC_ENUMFMT with webcams V4L/DVB (12156): em28xx: Fix tuning for Terratec Cinergy T XS USB (zl10353 version) V4L/DVB (12139): em28xx: add other video formats V4L/DVB (12138): em28xx: add support for Silvercrest Webcam V4L/DVB (12174): mt9v011: let's stick with datasheet values where it works V4L/DVB (12173): mt9v011: properly calculate image resolution registers V4L/DVB (12137): mt9v011: CodingStyle fixes V4L/DVB (12136): mt9v011: Some fixes at the register initialization table V4L/DVB (12135): Add a driver for mt9v011 sensor V4L/DVB (12166): cx23885: add FIXME comment above set_frontend override V4L/DVB (12165): cx23885: override set_frontend to allow rf input path switching on the HVR1275 V4L/DVB (12148): move V4L2_PIX_FMT_SGRBG8 to the proper place V4L/DVB (12182): cx18: Add DVB-T support for Yuan MPC-718 cards with an MT352 or ZL10353 V4L/DVB (12181): get_dvb_firmware: Add Yuan MPC718 MT352 DVB-T "firmware" extraction V4L/DVB (12180): cx18: Update Yuan MPC-718 card entry with better information and guesses ...
-
git://git.infradead.org/iommu-2.6Linus Torvalds authored
* git://git.infradead.org/iommu-2.6: intel-iommu: Don't use identity mapping for PCI devices behind bridges intel-iommu: Use iommu_should_identity_map() at startup time too. intel-iommu: No mapping for non-PCI devices intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics drivers intel-iommu: Add iommu_should_identity_map() function intel-iommu: Fix reattaching of devices to identity mapping domain intel-iommu: Don't set identity mapping for bypassed graphics devices intel-iommu: Fix dma vs. mm page confusion with aligned_nrpages()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: add support for disks >2 TB (and 16 bytes long CDBs) firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs) firewire: core: do not DMA-map stack addresses
-
Paul Mundt authored
This way they'll be properly initialized early enough for users that may touch them before the framebuffer has been registered. Drivers that allocate their fb_info structure some other way (like matrocfb's broken static allocation) need to be fixed up appropriately. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
do_execve() and ptrace_attach() return -EINTR if mutex_lock_interruptible(->cred_guard_mutex) fails. This is not right, change the code to return ERESTARTNOINTR. Perhaps we should also change proc_pid_attr_write(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: David Howells <dhowells@redhat.com> Acked-by:
Roland McGrath <roland@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Tobias Doerffel authored
In include/linux/sysrq.h the constant EINVAL is being used but is undefined if include/linux/errno.h is not included before. Fix this by adding #include <linux/errno.h> at the beginning. Signed-off-by:
Tobias Doerffel <tobias.doerffel@gmail.com> Signed-off-by:
-
InKi Dae authored
Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER. Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1) } x {(HSPW+1) + (HBPD +1) + (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock source ) } ] and VCLK = Video Clock Source / (CLKVAL +1). therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel clock * refresh". for this, I added refresh value in platform data like below. static struct s3c_fb_pd_win xxx_fb_win0 = { /* this is to ensure we use win0 */ .win_mode = { .refresh = 60, .pixclock = (66+4+2+480)*(15+5+3+800), .left_margin = 66, .right_margin = 2, .upper_margin = 15, .lower_margin = 3, .hsync_len = 4, .vsync_len = 5, .xres = 480, .yres = 800, }, .max_bpp = 32, .default_bpp = 24, }; static struct s3c_fb_platdata xxx_lcd_pdata __initdata = { .win[0] = &xxx_fb_win0, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | VIDCON1_INV_VCLK | VIDCON1_INV_VDEN, .setup_gpio = s5pc1xx_fb_gpio_setup_24bpp, }; xxx_machine_init() { . . . s3c_fb_set_platdata(&xxx_lcd_pdata); } platform data defined in machine code should be setting using s3c_fb_set_platdata(). Signed-off-by:InKi Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Kevin Cernekee authored
These warnings were observed on MIPS32 using 2.6.31-rc1 and gcc-4.2.0: mm/page_alloc.c: In function 'alloc_pages_exact': mm/page_alloc.c:1986: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast drivers/usb/mon/mon_bin.c: In function 'mon_alloc_buff': drivers/usb/mon/mon_bin.c:1264: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [akpm@linux-foundation.org: fix kernel/perf_counter.c too] Signed-off-by:
Kevin Cernekee <cernekee@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Josef Bacik authored
In testing a backport of the write_begin/write_end AOPs, a 10% re-read regression was noticed when running iozone. This regression was introduced because the old AOPs would always do a mark_page_accessed(page) after the commit_write, but when the new AOPs where introduced, the only place this was kept was in pagecache_write_end(). This patch does the same thing in the generic case as what is done in pagecache_write_end(), which is just to mark the page accessed before we do write_end(). Signed-off-by:
Josef Bacik <jbacik@redhat.com> Acked-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Hui Zhu authored
Fix the multithread program core thread message error. This issue affects arches with neither has CORE_DUMP_USE_REGSET nor ELF_CORE_COPY_TASK_REGS, ARM is one of them. The thread message of core file is generated in elf_dump_thread_status. The register values is set by elf_core_copy_task_regs in this function. If an arch doesn't define ELF_CORE_COPY_TASK_REGS, elf_core_copy_task_regs() will do nothing. Then the core file will not have the register message of thread. So add elf_core_copy_regs to set regiser values if ELF_CORE_COPY_TASK_REGS doesn't define. The following is how to reproduce this issue: cat 1.c #include <stdio.h> #include <pthread.h> #include <assert.h> void td1(void * i) { while (1) { printf ("1\n"); sleep (1); } return; } void td2(void * i) { while (1) { printf ("2\n"); sleep (1); } return; } int main(int argc,char *argv[],char *envp[]) { pthread_t t1,t2; pthread_create(&t1, NULL, (void*)td1, NULL); pthread_create(&t2, NULL, (void*)td2, NULL); sleep (10); assert(0); return (0); } arm-xxx-gcc -g -lpthread 1.c -o 1 copy 1.c and 1 to a arm board. Goto this board. ulimit -c 1800000 ./1 # ./1 1 2 1 ... ... 1 1: 1.c:37: main: Assertion `0' failed. Aborted (core dumped) Then you can get a core file. gdb 1 core.xxx Without the patch: (gdb) info threads 3 process 909 0x00000000 in ?? () 2 process 908 0x00000000 in ?? () * 1 process 907 0x4a6e2238 in raise () from /lib/libc.so.6 You can found that the pc of 909 and 908 is 0x00000000. With the patch: (gdb) info threads 3 process 885 0x4a749974 in nanosleep () from /lib/libc.so.6 2 process 884 0x4a749974 in nanosleep () from /lib/libc.so.6 * 1 process 883 0x4a6e2238 in raise () from /lib/libc.so.6 The pc of 885 and 884 is right. Signed-off-by:Hui Zhu <teawater@gmail.com> Cc: Amerigo Wang <xiyou.wangcong@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Zhang, Yanmin authored
I run many ffsb test cases on JBODs (typically 13/12 disks). Comparing with kernel 2.6.30, 2.6.31-rc1 has about 16% regression with ffsb_create_4k. The sub test case creates files continuously for 10 minitues and every file is 1MB. Bisect located below patch. 5cee5815 is first bad commit commit 5cee5815 Author: Jan Kara <jack@suse.cz> Date: Mon Apr 27 16:43:51 2009 +0200 vfs: Make sys_sync() use fsync_super() (version 4) It is unnecessarily fragile to have two places (fsync_super() and do_sync()) doing data integrity sync of the filesystem. Alter __fsync_super() to accommodate needs of both callers and use it. So after this patch __fsync_super() is the only place where we gather all the calls needed to properly send all data on a filesystem to disk. As a matter of fact, ffsb calls sys_sync in the end to make sure all data is flushed to disks and the flushing is counted into the result. vmstat shows ffsb is blocked when syncing for a long time. With 2.6.30, ffsb is blocked for a short time. I checked the patch and did experiments to recover the original methods. Eventually, the root cause is the patch deletes the calling to wakeup_pdflush when syncing, so only ffsb is blocked on disk I/O. wakeup_pdflush could ask pdflush to write back pages with ffsb at the same time. [akpm@linux-foundation.org: restore comment too] Signed-off-by:
Zhang Yanmin <yanmin_zhang@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Peter Oberparleiter authored
Fix for this issue on x86_64: rostedt@goodmis.org wrote: > On bootup of the latest kernel my init segfaults. Debugging it, > I found that vread_tsc (a vsyscall) increments some strange > kernel memory: > > 0000000000000000 <vread_tsc>: > 0: 55 push %rbp > 1: 48 ff 05 00 00 00 00 incq 0(%rip) > # 8 <vread_tsc+0x8> > 4: R_X86_64_PC32 .bss+0x3c > 8: 48 89 e5 mov %rsp,%rbp > b: 66 66 90 xchg %ax,%ax > e: 48 ff 05 00 00 00 00 incq 0(%rip) > # 15 <vread_tsc+0x15> > 11: R_X86_64_PC32 .bss+0x44 > 15: 66 66 90 xchg %ax,%ax > 18: 48 ff 05 00 00 00 00 incq 0(%rip) > # 1f <vread_tsc+0x1f> > 1b: R_X86_64_PC32 .bss+0x4c > 1f: 0f 31 rdtsc > > > Those "incq" is very bad to happen in vsyscall memory, since > userspace can not modify it. You need to make something prevent > profiling of vsyscall memory (like I do with ftrace). Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Reported-by:
Steven Rostedt <rostedt@goodmis.org> Tested-by:
-
Jiri Slaby authored
When i2c_smbus_read_byte_data fails in ds1374_work, we forgot to unlock the held lock. Fix that. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Florian Fainelli authored
Fix a typo in the VLYNQ bus driver Kconfig which prevented to turn on VLYNQ bus debugging. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Robert P. J. Day authored
Fix a typo in the vlynq bus driver which was missing the CONFIG_ prefix to turn on debugging code. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Krzysztof Helt authored
Remove redundant call to the sisfb_get_fix() before sis frambuffer is registered. This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Tested-by:
Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by:
-
David S. Miller authored
This reverts commit a1091aae.
-
Wei Yongjun authored
Commit 'net: Move rx skb_orphan call to where needed' broken sctp protocol with warning at inet_sock_destruct(). Actually, sctp can do this right with sctp_sock_rfree_frag() and sctp_skb_set_owner_r_frag() pair. sctp_sock_rfree_frag(skb); sctp_skb_set_owner_r_frag(skb, newsk); This patch not revert the commit d55d87fd, instead remove the sctp_sock_rfree_frag() function. ------------[ cut here ]------------ WARNING: at net/ipv4/af_inet.c:151 inet_sock_destruct+0xe0/0x142() Modules linked in: sctp ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_mod ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 1808, comm: sctp_test Not tainted 2.6.31-rc2 #40 Call Trace: [<c042dd06>] warn_slowpath_common+0x6a/0x81 [<c064a39a>] ? inet_sock_destruct+0xe0/0x142 [<c042dd2f>] warn_slowpath_null+0x12/0x15 [<c064a39a>] inet_sock_destruct+0xe0/0x142 [<c05fde44>] __sk_free+0x19/0xcc [<c05fdf50>] sk_free+0x18/0x1a [<ca0d14ad>] sctp_close+0x192/0x1a1 [sctp] [<c0649f7f>] inet_release+0x47/0x4d [<c05fba4d>] sock_release+0x19/0x5e [<c05fbab3>] sock_close+0x21/0x25 [<c049c31b>] __fput+0xde/0x189 [<c049c3de>] fput+0x18/0x1a [<c049988f>] filp_close+0x56/0x60 [<c042f422>] put_files_struct+0x5d/0xa1 [<c042f49f>] exit_files+0x39/0x3d [<c043086a>] do_exit+0x1a5/0x5dd [<c04a86c2>] ? d_kill+0x35/0x3b [<c0438fa4>] ? dequeue_signal+0xa6/0x115 [<c0430d05>] do_group_exit+0x63/0x8a [<c0439504>] get_signal_to_deliver+0x2e1/0x2f9 [<c0401d9e>] do_notify_resume+0x7c/0x6b5 [<c043f601>] ? autoremove_wake_function+0x0/0x34 [<c04a864e>] ? __d_free+0x3d/0x40 [<c04a867b>] ? d_free+0x2a/0x3c [<c049ba7e>] ? vfs_write+0x103/0x117 [<c05fc8fa>] ? sys_socketcall+0x178/0x182 [<c0402a56>] work_notifysig+0x13/0x19 ---[ end trace 9db92c463e789fba ]--- Signed-off-by:Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mariusz Kozlowski authored
Fix NULL pointer dereference in tun_chr_pool() introduced by commit 33dccbb0 ("tun: Limit amount of queued packets per device") and triggered by this code: int fd; struct pollfd pfd; fd = open("/dev/net/tun", O_RDWR); pfd.fd = fd; pfd.events = POLLIN | POLLOUT; poll(&pfd, 1, 0); Reported-by:
Eugene Kapun <abacabadabacaba@gmail.com> Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
David S. Miller authored
This reverts commit a1317f71.
-
Michal Simek authored
Signed-off-by:Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by: -
Arnd Bergmann authored
The prototypes in syscalls.h all make sense for microblaze, but for some of them, the actual implementation in sys_microblaze.c needs to be adapted. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
