- 04 Jun, 2018 40 commits
-
-
Dan Carpenter authored
This code was introduced in 2011 around the same time that we made netdev_features_t a u64 type. These days a u32 is not big enough to hold all the potential features. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The features mask needs to be a netdev_features_t (u64) because a u32 is not big enough. Fixes: cfc80d9a ("net: Introduce net_failover driver") Signed-off-by:
-
YueHaibing authored
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
YueHaibing authored
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-06-04 Here's one last bluetooth-next pull request for the 4.18 kernel: - New USB device IDs for Realtek 8822BE and 8723DE - reset/resume fix for Dell Inspiron 5565 - Fix HCI_UART_INIT_PENDING flag behavior - Fix patching behavior for some ATH3012 models - A few other minor cleanups & fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Olivier Gayot authored
This patch fixes some typos/misspelling errors in the Documentation/networking files. Signed-off-by:
Olivier Gayot <olivier.gayot@sigexec.com> Signed-off-by:
-
Maciej Żenczykowski authored
It is not safe to do so because such sockets are already in the hash tables and changing these options can result in invalidating the tb->fastreuse(port) caching. This can have later far reaching consequences wrt. bind conflict checks which rely on these caches (for optimization purposes). Not to mention that you can currently end up with two identical non-reuseport listening sockets bound to the same local ip:port by clearing reuseport on them after they've already both been bound. There is unfortunately no EISBOUND error or anything similar, and EISCONN seems to be misleading for a bound-but-not-connected socket, so use EUCLEAN 'Structure needs cleaning' which AFAICT is the closest you can get to meaning 'socket in bad state'. (although perhaps EINVAL wouldn't be a bad choice either?) This does unfortunately run the risk of breaking buggy userspace programs... Signed-off-by:
Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Change-Id: I77c2b3429b2fdf42671eee0fa7a8ba721c94963b Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Maciej Żenczykowski authored
This changes the /proc/sys/net/ipv4/tcp_tw_reuse from a boolean to an integer. It now takes the values 0, 1 and 2, where 0 and 1 behave as before, while 2 enables timewait socket reuse only for sockets that we can prove are loopback connections: ie. bound to 'lo' interface or where one of source or destination IPs is 127.0.0.0/8, ::ffff:127.0.0.0/104 or ::1. This enables quicker reuse of ephemeral ports for loopback connections - where tcp_tw_reuse is 100% safe from a protocol perspective (this assumes no artificially induced packet loss on 'lo'). This also makes estblishing many loopback connections *much* faster (allocating ports out of the first half of the ephemeral port range is significantly faster, then allocating from the second half) Without this change in a 32K ephemeral port space my sample program (it just establishes and closes [::1]:ephemeral -> [::1]:server_port connections in a tight loop) fails after 32765 connections in 24 seconds. With it enabled 50000 connections only take 4.7 seconds. This is particularly problematic for IPv6 where we only have one local address and cannot play tricks with varying source IP from 127.0.0.0/8 pool. Signed-off-by:
-
Yuval Bason authored
This patch adds support for configuring SRQ and provides the necessary APIs for rdma upper layer driver (qedr) to enable the SRQ feature. Signed-off-by:
Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
Yuval Bason <yuval.bason@cavium.com> Signed-off-by:
-
David S. Miller authored
Varsha Rao says: ==================== net: bnx2: Fix checkpatch and clang warnings This patchset fixes NULL comparison and extra parentheses, checkpatch and clang warnings. ==================== Signed-off-by: -
Varsha Rao authored
This patch fixes the checkpatch issue of NULL comparison. Replace x == NULL with !x, by using the following coccinelle script: @disable is_null@ expression e; @@ -e==NULL +!e Signed-off-by:
Varsha Rao <rvarsha016@gmail.com> Signed-off-by:
-
Varsha Rao authored
The following coccinelle script removes extra parentheses to fix the clang warning of extraneous parentheses. @disable paren@ identifier i; expression e; statement s; @@ if ( -(i == e) +i == e ) s Suggested-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
YueHaibing authored
Trivial fix to spelling mistake in gemini dev_warn message Signed-off-by:
-
Paul Blakey authored
We incorrectly compare the mask and the result is that we can't modify an already existing rule. Fix that by comparing correctly. Fixes: 05cd271f ("cls_flower: Support multiple masks per priority") Reported-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Paul Blakey authored
When destroying the instance, destroy the head rhashtable. Fixes: 05cd271f ("cls_flower: Support multiple masks per priority") Reported-by:
-
Randy Dunlap authored
<linux/skbuff.h> does not use nor need <linux/slab.h>, so drop this header file from skbuff.h. <linux/skbuff.h> is currently #included in around 1200 C source and header files, making it the 31st most-used header file. Build tested [allmodconfig] on 20 arch-es. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
YueHaibing authored
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Signed-off-by:
-
David Howells authored
Sometimes an in-progress call will stop responding on the fileserver when the fileserver quietly cancels the call with an internally marked abort (RX_CALL_DEAD), without sending an ABORT to the client. This causes the client's call to eventually expire from lack of incoming packets directed its way, which currently leads to it being cancelled locally with ETIME. Note that it's not currently clear as to why this happens as it's really hard to reproduce. The rotation policy implement by kAFS, however, doesn't differentiate between ETIME meaning we didn't get any response from the server and ETIME meaning the call got cancelled mid-flow. The latter leads to an oops when fetching data as the rotation partially resets the afs_read descriptor, which can result in a cleared page pointer being dereferenced because that page has already been filled. Handle this by the following means: (1) Set a flag on a call when we receive a packet for it. (2) Store the highest packet serial number so far received for a call (bearing in mind this may wrap). (3) If, when the "not received anything recently" timeout expires on a call, we've received at least one packet for a call and the connection as a whole has received packets more recently than that call, then cancel the call locally with ECONNRESET rather than ETIME. This indicates that the call was definitely in progress on the server. (4) In kAFS, if the rotation algorithm sees ECONNRESET rather than ETIME, don't try the next server, but rather abort the call. This avoids the oops as we don't try to reuse the afs_read struct. Rather, as-yet ungotten pages will be reread at a later data. Also: (5) Add an rxrpc tracepoint to log detection of the call being reset. Without this, I occasionally see an oops like the following: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:_copy_to_iter+0x204/0x310 RSP: 0018:ffff8800cae0f828 EFLAGS: 00010206 RAX: 0000000000000560 RBX: 0000000000000560 RCX: 0000000000000560 RDX: ffff8800cae0f968 RSI: ffff8800d58b3312 RDI: 0005080000000000 RBP: ffff8800cae0f968 R08: 0000000000000560 R09: ffff8800ca00f400 R10: ffff8800c36f28d4 R11: 00000000000008c4 R12: ffff8800cae0f958 R13: 0000000000000560 R14: ffff8800d58b3312 R15: 0000000000000560 FS: 00007fdaef108080(0000) GS:ffff8800ca680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb28a8fa000 CR3: 00000000d2a76002 CR4: 00000000001606e0 Call Trace: skb_copy_datagram_iter+0x14e/0x289 rxrpc_recvmsg_data.isra.0+0x6f3/0xf68 ? trace_buffer_unlock_commit_regs+0x4f/0x89 rxrpc_kernel_recv_data+0x149/0x421 afs_extract_data+0x1e0/0x798 ? afs_wait_for_call_to_complete+0xc9/0x52e afs_deliver_fs_fetch_data+0x33a/0x5ab afs_deliver_to_call+0x1ee/0x5e0 ? afs_wait_for_call_to_complete+0xc9/0x52e afs_wait_for_call_to_complete+0x12b/0x52e ? wake_up_q+0x54/0x54 afs_make_call+0x287/0x462 ? afs_fs_fetch_data+0x3e6/0x3ed ? rcu_read_lock_sched_held+0x5d/0x63 afs_fs_fetch_data+0x3e6/0x3ed afs_fetch_data+0xbb/0x14a afs_readpages+0x317/0x40d __do_page_cache_readahead+0x203/0x2ba ? ondemand_readahead+0x3a7/0x3c1 ondemand_readahead+0x3a7/0x3c1 generic_file_buffered_read+0x18b/0x62f __vfs_read+0xdb/0xfe vfs_read+0xb2/0x137 ksys_read+0x50/0x8c do_syscall_64+0x7d/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note the weird value in RDI which is a result of trying to kmap() a NULL page pointer. Signed-off-by:David Howells <dhowells@redhat.com> Signed-off-by:
-
Chas Williams authored
Let user space set whatever it would like to advertise for the tun interface. Preserve the existing defaults. Signed-off-by:
Chas Williams <3chas3@gmail.com> Signed-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== sh_eth: fix & clean up sh_eth_soft_swap() Here's a set of 3 patches against DaveM's 'net-next.git' repo. First one fixes an old buffer endiannes issue (luckily, the ARM SoCs are smart enough to not actually care) plus couple clean ups around sh_eth_soft_swap()... ==================== Signed-off-by: -
Sergei Shtylyov authored
When initializing 'maxp' in sh_eth_soft_swap(), the buffer length needs to be rounded up -- that's just asking for DIV_ROUND_UP()! Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Sergei Shtylyov authored
sh_eth_tsu_soft_swap() is called twice by the driver, remove *inline* and move that function from the header to the driver itself to let gcc decide whether to expand it inline or not... Signed-off-by:
-
Sergei Shtylyov authored
Browsing thru the driver disassembly, I noticed that ARM gcc generated no code whatsoever for sh_eth_soft_swap() while building a little-endian kernel -- apparently __LITTLE_ENDIAN__ was not being #define'd, however it got implicitly #define'd when building with the SH gcc (I could only find the explicit #define __LITTLE_ENDIAN that was #include'd when building a little-endian kernel). Luckily, the Ether controller only doing big- endian DMA is encountered on the early SH771x SoCs only and all ARM SoCs implement EDMR.DE and thus set 'sh_eth_cpu_data::hw_swap'. But anyway, we need to fix the #ifdef inside sh_eth_soft_swap() to something that would work on all architectures... Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Fixes in offloading of mirror-to-gretap Petr says: These two patches fix issues in offloading of mirror-to-gretap when bridge is present in the underlay. In patch #1, reconsideration of SPAN configuration is not done right at the point that SWITCHDEV_OBJ_ID_PORT_VLAN deletion notification is distributed, but is postponed, because the notifications are actually distributed before the relevant change is implemented in the bridge. In patch #2, a problem in configuring VLAN tagging in situations when a VLAN device is on top of an 802.1Q bridge whose egress port is marked as "egress untagged". In that case, mlxsw would neglect to suppress the tagging implicitly assumed after the VLAN device was seen. ==================== Signed-off-by: -
Petr Machata authored
When offloading mirroring to gretap or ip6gretap netdevices, an 802.1q bridge is one of the soft devices permissible in the underlay when resolving the packet path. After the packet path is resolved to a particular bridge egress device, flags on packet VLAN determine whether the egressed packet should be tagged. The current logic however only ever sets the VLAN tag, never suppresses it. Thus if there's a VLAN netdevice above the bridge that determines the packet VLAN, that VLAN is never unset, and mirroring is configured with VLAN tagging. Fix by setting the packet VLAN on both branches: set to zero (for unset) when BRIDGE_VLAN_INFO_UNTAGGED, copy the resolved VLAN (e.g. from bridge PVID) otherwise. Fixes: 946a11e7 ("mlxsw: spectrum_span: Allow bridge for gretap mirror") Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
VLAN deletion notifications are emitted before the relevant change is projected to bridge configuration. Thus, like with VLAN addition, schedule SPAN respin for later. Fixes: c520bc69 ("mlxsw: Respin SPAN on switchdev events") Signed-off-by:
-
Michal Kubecek authored
Some of the code paths calculating flow hash for IPv6 use flowlabel member of struct flowi6 which, despite its name, encodes both flow label and traffic class. If traffic class changes within a TCP connection (as e.g. ssh does), ECMP route can switch between path. It's also inconsistent with other code paths where ip6_flowlabel() (returning only flow label) is used to feed the key. Use only flow label everywhere, including one place where hash key is set using ip6_flowinfo(). Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Fixes: f70ea018 ("net: Add functions to get skb->hash based on flow structures") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
David S. Miller authored
This reverts commit 87ae68c8. Applied the wrong version of this fix, correct version coming up. Signed-off-by:
-
Michal Kubecek authored
Some of the code paths calculating flow hash for IPv6 use flowlabel member of struct flowi6 which, despite its name, encodes both flow label and traffic class. If traffic class changes within a TCP connection (as e.g. ssh does), ECMP route can switch between path. It's also incosistent with other code paths where ip6_flowlabel() (returning only flow label) is used to feed the key. Use only flow label everywhere, including one place where hash key is set using ip6_flowinfo(). Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Fixes: f70ea018 ("net: Add functions to get skb->hash based on flow structures") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
kbuild test robot authored
Fixes: db9d7d36 ("net: mvpp2: Split the PPv2 driver to a dedicated directory") Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Eric Dumazet authored
syzbot was able to trick af_packet again [1] Various commits tried to address the problem in the past, but failed to take into account V3 header size. [1] tpacket_rcv: packet too big, clamped from 72 to 4294967224. macoff=96 BUG: KASAN: use-after-free in prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline] BUG: KASAN: use-after-free in prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039 Write of size 2 at addr ffff8801cb62000e by task kworker/1:2/2106 CPU: 1 PID: 2106 Comm: kworker/1:2 Not tainted 4.17.0-rc7+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_store2_noabort+0x17/0x20 mm/kasan/report.c:436 prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline] prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039 __packet_lookup_frame_in_block net/packet/af_packet.c:1094 [inline] packet_current_rx_frame net/packet/af_packet.c:1117 [inline] tpacket_rcv+0x1866/0x3340 net/packet/af_packet.c:2282 dev_queue_xmit_nit+0x891/0xb90 net/core/dev.c:2018 xmit_one net/core/dev.c:3049 [inline] dev_hard_start_xmit+0x16b/0xc10 net/core/dev.c:3069 __dev_queue_xmit+0x2724/0x34c0 net/core/dev.c:3584 dev_queue_xmit+0x17/0x20 net/core/dev.c:3617 neigh_resolve_output+0x679/0xad0 net/core/neighbour.c:1358 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xc9c/0x2810 net/ipv6/ip6_output.c:120 ip6_finish_output+0x5fe/0xbc0 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:277 [inline] ip6_output+0x227/0x9b0 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:288 [inline] ndisc_send_skb+0x100d/0x1570 net/ipv6/ndisc.c:491 ndisc_send_ns+0x3c1/0x8d0 net/ipv6/ndisc.c:633 addrconf_dad_work+0xbef/0x1340 net/ipv6/addrconf.c:4033 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 The buggy address belongs to the page: page:ffffea00072d8800 count:0 mapcount:-127 mapping:0000000000000000 index:0xffff8801cb620e80 flags: 0x2fffc0000000000() raw: 02fffc0000000000 0000000000000000 ffff8801cb620e80 00000000ffffff80 raw: ffffea00072e3820 ffffea0007132d20 0000000000000002 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801cb61ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8801cb61ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8801cb620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8801cb620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8801cb620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 2b6867c2 ("net/packet: fix overflow in check for priv area size") Fixes: dc808110 ("packet: handle too big packets for PACKET_V3") Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Colin Ian King authored
The function aq_fw2x_get_mac_permanent is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'aq_fw2x_get_mac_permanent' was not declared. Should it be static? Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Stephen Suryaputra authored
Use the right device to determine if redirect should be sent especially when using vrf. Same as well as when sending the redirect. Signed-off-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by:
-
Varsha Rao authored
This patch fixes the clang warning of extraneous parentheses, with the following coccinelle script. @@ identifier i; expression e; statement s; @@ if ( -(i == e) +i == e ) s Suggested-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Jose Abreu authored
This adds support for Flexible PPS output (which is equivalent to per_out output of PTP subsystem). Tested using an oscilloscope and the following commands: 1) Start PTP4L: # ptp4l -A -4 -H -m -i eth0 & 2) Set Flexible PPS frequency: # echo <idx> <ts> <tns> <ps> <pns> > /sys/class/ptp/ptpX/period Where, ts/tns is start time and ps/pns is period time, and ptpX is ptp of eth0. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed: Fix issues in UFP feature commit 'cac6f691'. This patch series fixes couple of issues in the UFP feature commit, cac6f691: Add support for Unified Fabric Port. Changes from previous version: ------------------------------ v2: Added "Fixes:" tag. Please consider applying it to "net-next". ==================== Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Incorrect shared memory address is used while deriving the values for tc and pri_type. Use shmem address corresponding to 'oem_cfg_func' where the management firmare saves tc/pri_type values. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
The structure shared between driver and management firmware (MFW) differ in sizes. The additional field defined by the MFW is not relevant to the current driver. Add a dummy field to the structure. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== selftests: forwarding: mirror_vlan: Fixlets This patchset includes two small fixes for the tests that were introduced in commit 1bb58d2d ("Merge branch 'Mirroring-tests-involving-VLAN'"). In patch #1, a "tc action trap" is uninstalled after the suite runs, instead of being installed again. In patch #2, a test in suite is renamed to differentiate it from another test of the same name. ==================== Signed-off-by:
-
