- 30 Oct, 2019 6 commits
-
-
Ville Syrjälä authored
We always pass mode==NULL to intel_get_load_detect_pipe(). Remove the pointless function argument. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191029132323.18113-1-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
Imre Deak authored
For the HPD interrupt functionality the HW depends on power wells in the display core domain to be on. Accordingly when enabling these power wells the HPD polling logic will force an HPD detection cycle to account for hotplug events that may have happened when such a power well was off. Thus a detect cycle started by polling could start a new detect cycle if a power well in the display core domain gets enabled during detect and stays enabled after detect completes. That in turn can lead to a detection cycle runaway. To prevent re-triggering a poll-detect cycle make sure we drop all power references we acquired during detect synchronously by the end of detect. This will let the poll-detect logic continue with polling (matching the off state of the corresponding power wells) instead of scheduling a new detection cycle. Fixes: 6cfe7ec0 ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125Reported-and-tested-by:
Val Kulkov <val.kulkov@gmail.com> Reported-and-tested-by:
wangqr <wqr.prg@gmail.com> Cc: Val Kulkov <val.kulkov@gmail.com> Cc: wangqr <wqr.prg@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Chris Wilson authored
During startup, we may find ourselves in an interesting position where we haven't fully enabled RPS before the display starts trying to use it. This may lead to an imbalance in our "interactive" counter: <3>[ 4.813326] intel_rps_mark_interactive:652 GEM_BUG_ON(!rps->power.interactive) <4>[ 4.813396] ------------[ cut here ]------------ <2>[ 4.813398] kernel BUG at drivers/gpu/drm/i915/gt/intel_rps.c:652! <4>[ 4.813430] invalid opcode: 0000 [#1] PREEMPT SMP PTI <4>[ 4.813438] CPU: 1 PID: 18 Comm: kworker/1:0H Not tainted 5.4.0-rc5-CI-CI_DRM_7209+ #1 <4>[ 4.813447] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017 <4>[ 4.813525] Workqueue: events_highpri intel_atomic_cleanup_work [i915] <4>[ 4.813589] RIP: 0010:intel_rps_mark_interactive+0xb3/0xc0 [i915] <4>[ 4.813597] Code: bc 3f de e0 48 8b 35 84 2e 24 00 49 c7 c0 f3 d4 4e a0 b9 8c 02 00 00 48 c7 c2 80 9c 48 a0 48 c7 c7 3e 73 34 a0 e8 8d 3b e5 e0 <0f> 0b 90 66 2e 0f 1f 84 00 00 00 00 00 80 bf c0 00 00 00 00 74 32 <4>[ 4.813616] RSP: 0018:ffffc900000efe00 EFLAGS: 00010286 <4>[ 4.813623] RAX: 000000000000000e RBX: ffff8882583cc7f0 RCX: 0000000000000000 <4>[ 4.813631] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888275969c00 <4>[ 4.813639] RBP: 0000000000000000 R08: 0000000000000008 R09: ffff888275ace000 <4>[ 4.813646] R10: ffffc900000efe00 R11: ffff888275969c00 R12: ffff8882583cc8d8 <4>[ 4.813654] R13: ffff888276abce00 R14: 0000000000000000 R15: ffff88825e878860 <4>[ 4.813662] FS: 0000000000000000(0000) GS:ffff888276a80000(0000) knlGS:0000000000000000 <4>[ 4.813672] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 4.813678] CR2: 00007f051d5ca0a8 CR3: 0000000262f48001 CR4: 00000000003606e0 <4>[ 4.813686] Call Trace: <4>[ 4.813755] intel_cleanup_plane_fb+0x4e/0x60 [i915] <4>[ 4.813764] drm_atomic_helper_cleanup_planes+0x4d/0x70 <4>[ 4.813833] intel_atomic_cleanup_work+0x15/0x80 [i915] <4>[ 4.813842] process_one_work+0x26a/0x620 <4>[ 4.813850] worker_thread+0x37/0x380 <4>[ 4.813857] ? process_one_work+0x620/0x620 <4>[ 4.813864] kthread+0x119/0x130 <4>[ 4.813870] ? kthread_park+0x80/0x80 <4>[ 4.813878] ret_from_fork+0x3a/0x50 <4>[ 4.813887] Modules linked in: i915(+) mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul btusb btrtl btbcm btintel snd_hda_intel snd_intel_nhlt snd_hda_codec bluetooth snd_hwdep snd_hda_core ghash_clmulni_intel snd_pcm e1000e ecdh_generic ecc ptp pps_core mei_me mei prime_numbers <4>[ 4.813934] ---[ end trace c13289af88174ffc ]--- The solution employed is to not worry about RPS state and keep the tally of the interactive counter separate. When we do enable RPS, we will then take the display activity into account. Fixes: 3e7abf81 ("drm/i915: Extract GT render power state management") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Acked-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191030103827.2413-1-chris@chris-wilson.co.uk
-
Mika Kuoppala authored
This has been asked from us already. Prepare for the next time. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
-
Mika Kuoppala authored
On debugging media workload hangs, sfc instdone might prove useful in future. Be prepared. Signed-off-by:
-
Lucas De Marchi authored
This is the minimum change to support 1 (and only 1) DP-MST monitor connected on Tiger Lake. This change was isolated from previous patch from José. In order to support more streams we will need to create a master-slave relation on the transcoders and that is not currently working yet. v2: remove unused macro and use REG_FIELD_PREP() (Ville) Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191029035049.5907-1-lucas.demarchi@intel.com
-
- 29 Oct, 2019 24 commits
-
-
Chris Wilson authored
Our existing behaviour is to allow contexts and their GPU requests to persist past the point of closure until the requests are complete. This allows clients to operate in a 'fire-and-forget' manner where they can setup a rendering pipeline and hand it over to the display server and immediately exit. As the rendering pipeline is kept alive until completion, the display server (or other consumer) can use the results in the future and present them to the user. The compute model is a little different. They have little to no buffer sharing between processes as their kernels tend to operate on a continuous stream, feeding the results back to the client application. These kernels operate for an indeterminate length of time, with many clients wishing that the kernel was always running for as long as they keep feeding in the data, i.e. acting like a DSP. Not all clients want this persistent "desktop" behaviour and would prefer that the contexts are cleaned up immediately upon closure. This ensures that when clients are run without hangchecking (e.g. for compute kernels of indeterminate runtime), any GPU hang or other unexpected workloads are terminated with the process and does not continue to hog resources. The default behaviour for new contexts is the legacy persistence mode, as some desktop applications are dependent upon the existing behaviour. New clients will have to opt in to immediate cleanup on context closure. If the hangchecking modparam is disabled, so is persistent context support -- all contexts will be terminated on closure. We expect this behaviour change to be welcomed by compute users, who have often been caught between a rock and a hard place. They disable hangchecking to avoid their kernels being "unfairly" declared hung, but have also experienced true hangs that the system was then unable to clean up. Naturally, this leads to bug reports. Testcase: igt/gem_ctx_persistence Link: https://github.com/intel/compute-runtime/pull/228Signed-off-by:
Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by:
Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20191029202338.8841-1-chris@chris-wilson.co.uk
-
Matt Roper authored
We're seeing some failures where an aux transaction still shows as 'busy' well after the timeout limit that the hardware is supposed to enforce. Improve the error message so that we can see exactly which aux channel this error happened on and what the status bits were during this case that isn't supposed to happen. v2: - Make timeout a const variable so that the timeout & message will match if we decide to change it in the future. (Lucas) - Don't bother testing intel_dp->aux.name for NULL. (Lucas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191029173102.9451-1-matthew.d.roper@intel.comReviewed-by:
-
José Roberto de Souza authored
DSC could be fused off, so not all GEN10+ platforms will support it. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Check if DMC is fused off and handle it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by:
-
José Roberto de Souza authored
Check if FBC is fused off and handle it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by:
-
José Roberto de Souza authored
HDCP could be fused off, so not all GEN9+ platforms will support it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by:
-
José Roberto de Souza authored
The next patches are going to touch this registers so here already fixing it for older registers and make it consistent with most of the other registers in this file. Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191026001323.216052-1-jose.souza@intel.com
-
Lionel Landwerlin authored
Gen12 only support a single report format : I915_OA_FORMAT_A32u40_A4u32_B8_C8 Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 00a7f0d7 ("drm/i915/tgl: Add perf support on TGL") Reviewed-by:
-
Matt Roper authored
Our TGL CI platforms are running into cases where aux transactions have failed to complete or declare a timeout well after the timeout limit that the hardware is supposed to enforce. From the logs it appears that these failures arise when aux transactions happen after we've entered DC6: <7> [622.523650] [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [622.523685] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 ... <3> [622.535753] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.547745] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.559746] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.571744] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.583743] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.583780] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp_aux_ch not done status 0xad400bff <7> [622.863725] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110 On TGL AUX B & C are in PG1 (managed by the DMC firmware) rather than PG3 as they were on ICL, so allowing DC6 means the DMC firmware might shut off the power wells behind our backs when we're trying to use them. Signed-off-by:
-
Matt Roper authored
We reference DP AUX registers via the DP_AUX_CH_CTL() and DP_AUX_CH_DATA() macros that calculate all the register offsets for us automatically; there's no need to explicitly define every offset in i915_reg.h if they're never going to be used by the driver code. v2: Apparently GVT was directly using these raw definitions in a couple places. Switch GVT code over to using our preferred macros. Signed-off-by: -
Chris Wilson authored
Execlists uses a scheduling quantum (a timeslice) to alternate execution between ready-to-run contexts of equal priority. This ensures that all users (though only if they of equal importance) have the opportunity to run and prevents livelocks where contexts may have implicit ordering due to userspace semaphores. However, not all workloads necessarily benefit from timeslicing and in the extreme some sysadmin may want to disable or reduce the timeslicing granularity. The timeslicing mechanism can be compiled out^W^W disabled (but should DCE!) with ./scripts/config --set-val DRM_I915_TIMESLICE_DURATION 0 Signed-off-by:
-
Janusz Krzysztofik authored
Commit f2db53f1 ("drm/i915: Replace "_load" with "_probe" consequently") deliberately left the name of the module parameter unchanged as that would require a corresponding change on IGT size. Now as the IGT side change has been submitted, complete the switch to the "probe" nomenclature. Suggested-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Michał Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Janusz Krzysztofik authored
Commit 50d84418 ("drm/i915: Add i915 to i915_inject_probe_failure") introduced new functions unfortunately named incompatibly with rules established by commit f2db53f1 ("drm/i915: Replace "_load" with "_probe" consequently"). Fix it for consistency. Suggested-by:
Michał Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The change from the uapi coordinates to the internal coordinates broke the cursor on i845/i865 due to src and dst getting swapped. Fix it. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 3a612765 ("drm/i915: Remove cursor use of properties for coordinates") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Lionel Landwerlin authored
The design of the OA unit has been split into several units. We now have a global unit (OAG) and a render specific unit (OAR). This leads to some changes on how we program things. Some details : OAR: - has its own set of counter registers, they are per-context saved/restored - counters are not written to the circular OA buffer - a snapshot of the counters can be acquired with MI_RECORD_PERF_COUNT, or a single counter can be read with MI_STORE_REGISTER_MEM. OAG: - has global counters that increment across context switches - counters are written into the circular OA buffer (if requested) v2: Fix checkpatch warnings on code style (Lucas) v3: (Umesh) - Update register from which tail, status and head are read - Update logic to sample context reports - Update whitelist mux and b counter regs v4: Fix a bug when updating context image for new contexts (Umesh) v5: Squash patch enabling save/restore of counters into context image We want this so we can preempt performance queries and keep the system responsive even when long running queries are ongoing. We avoid doing it for all contexts. - use LRI to modify context control (Chris) - use MASKED_FIELD to program just the masked bits (Chris) - disable save/restore of counters on cleanup (Chris) v6: Do not use implicit parameters (Chris) BSpec: 28727, 30021 Signed-off-by:Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by:
Chris Wilson <chris.p.wilson@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191025193746.47155-2-umesh.nerlige.ramappa@intel.com
-
Umesh Nerlige Ramappa authored
Add helper macros for range and equality comparisons and use them to check with whitelisted registers in oa configurations. Signed-off-by:
-
Matthew Auld authored
We may be missing support for the mappable aperture on some platforms. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
Matthew Auld authored
Since we have no way access it from the CPU. For such cases just fallback to internal objects. Signed-off-by:
-
Michal Wajdeczko authored
HWS placement restrictions can't just rely on HAS_LLC flag. Signed-off-by:
-
Daniele Ceraolo Spurio authored
If the aperture is not available in HW we can't use a ggtt slot and wc copy, so fall back to regular kmap. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
We can't fence anything without aperture. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Skip both setup and cleanup of the aperture mapping if the HW doesn't have an aperture bar. Signed-off-by:
-
Daniele Ceraolo Spurio authored
The following patches in the series will use it to avoid certain operations when the mappable aperture is not available in HW. Signed-off-by:
-
Matthew Auld authored
There is nothing to say that the obj->base.size is actually a multiple of the block_size. v2: Use round_up() as block_size is a power-of-two Reported-by:
-
- 28 Oct, 2019 10 commits
-
-
Chris Wilson authored
Currently we insert a arbitration point every 128MiB during a blitter copy. At 8GiB/s, this is around 30ms. This is a little on the large side if we need to inject a high priority work, so reduced it down to 8MiB or roughly 1ms. v2: Don't forget both fill/copy. Signed-off-by:
-
Michal Wajdeczko authored
While processing CSB there is no need to look at GuC submission settings, just check if engine is configured for execlists mode. While today GuC submission is disabled it's settings are still based on modparam values that might not correctly reflect actual submission status in case of any fallback. Until that is fully fixed, use alternate method to confirm that engine really runs in execlists mode by comparing set_default_submission vfunc. v2: add other immediate use of new helper Signed-off-by:
-
Chris Wilson authored
smatch complains about drivers/gpu/drm/i915//display/intel_display.c:14403 intel_set_dp_tp_ctl_normal() error: uninitialized symbol 'conn'. because it has no way to determine that the loop must have an entry. Tell the static analysers to ignore the local, it will always be set. Signed-off-by:
-
Chris Wilson authored
Keep smatch quiet, drivers/gpu/drm/i915//gem/selftests/i915_gem_context.c:1268 __igt_ctx_sseu() error: uninitialized symbol 'ret'. drivers/gpu/drm/i915//gem/selftests/i915_gem_context.c:1280 __igt_ctx_sseu() error: uninitialized symbol 'ret'. Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915//gt/selftest_engine_heartbeat.c:255 live_heartbeat_fast() error: uninitialized symbol 'err'. drivers/gpu/drm/i915//gt/selftest_engine_heartbeat.c:320 live_heartbeat_off() error: uninitialized symbol 'err'. Signed-off-by:
-
Chris Wilson authored
The request's timeline will only contain requests from this context, in order of execution. Therefore, we can simply look back along this timeline to find the currently executing request. If we do find that the current context has completed its last request, that does not imply that all requests are completed in the context, so only advance the ring->head up to the end of the known completions! Signed-off-by:
-
Chris Wilson authored
As we use hard coded offsets for a few locations within the context image, include those in the selftests to assert that they are valid. Signed-off-by:
-
Matt Roper authored
We're currently only processing AUX interrupts on the combo ports; make sure we handle the TC ports as well. v2: Drop stale comment Fixes: f663769a ("drm/i915/tgl: initialize TC and TBT ports") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Chris Wilson authored
Iterate over all user-accessible render engines when checking whether they can be adjusted for sseu. Signed-off-by:
-
Chris Wilson authored
Use any blitter engine at random for prefilling the memory region. Signed-off-by:
-
