Skip to content

L
linux
Switch branch/tag
  1. 28 Nov, 2016 4 commits
    • Nikolay Aleksandrov's avatar
      bridge: multicast: restore perm router ports on multicast enable · 260eb33c
      Nikolay Aleksandrov authored 
      [ Upstream commit 7cb3f921 ]

Satish reported a problem with the perm multicast router ports not getting
reenabled after some series of events, in particular if it happens that the
multicast snooping has been disabled and the port goes to disabled state
then it will be deleted from the router port list, but if it moves into
non-disabled state it will not be re-added because the mcast snooping is
still disabled, and enabling snooping later does nothing.

Here are the steps to reproduce, setup br0 with snooping enabled and eth1
added as a perm router (multicast_router = 2):
1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping
2. $ ip l set eth1 down
^ This step deletes the interface from the router list
3. $ ip l set eth1 up
^ This step does not add it again because mcast snooping is disabled
4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping
5. $ bridge -d -s mdb show
<empty>

At this point we have mcast enabled and eth1 as a perm router (value = 2)
but it is not in the router list which is incorrect.

After this change:
1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping
2. $ ip l set eth1 down
^ This step deletes the interface from the router list
3. $ ip l set eth1 up
^ This step does not add it again because mcast snooping is disabled
4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping
5. $ bridge -d -s mdb show
router ports on br0: eth1

Note: we can directly do br_multicast_enable_port for all because the
querier timer already has checks for the port state and will simply
expire if it's in blocking/disabled. See the comment added by
commit 9aa66382 ("bridge: multicast: add a comment to
br_port_state_selection about blocking state")

Fixes: 561f1103 ("bridge: Add multicast_snooping sysfs toggle")
Reported-by: default avatarSatish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      260eb33c
    • Nicolas Dichtel's avatar
      ipv6: correctly add local routes when lo goes up · e83687e1
      Nicolas Dichtel authored 
      [ Upstream commit a220445f ]

The goal of the patch is to fix this scenario:
 ip link add dummy1 type dummy
 ip link set dummy1 up
 ip link set lo down ; ip link set lo up

After that sequence, the local route to the link layer address of dummy1 is
not there anymore.

When the loopback is set down, all local routes are deleted by
addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still
exists, because the corresponding idev has a reference on it. After the rcu
grace period, dst_rcu_free() is called, and thus ___dst_free(), which will
set obsolete to DST_OBSOLETE_DEAD.

In this case, init_loopback() is called before dst_rcu_free(), thus
obsolete is still sets to something <= 0. So, the function doesn't add the
route again. To avoid that race, let's check the rt6 refcnt instead.

Fixes: 25fb6ca4 ("net IPv6 : Fix broken IPv6 routing table after loopback down-up")
Fixes: a881ae1f ("ipv6: don't call addrconf_dst_alloc again when enable lo")
Fixes: 33d99113 ("ipv6: reallocate addrconf router for ipv6 address when lo device up")
Reported-by: default avatarFrancesco Santoro <francesco.santoro@6wind.com>
Reported-by: default avatarSamuel Gauthier <samuel.gauthier@6wind.com>
CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com>
CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com>
CC: Sabrina Dubroca <sd@queasysnail.net>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
CC: Weilong Chen <chenweilong@huawei.com>
CC: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      e83687e1
    • Anoob Soman's avatar
      packet: call fanout_release, while UNREGISTERING a netdev · 1bd84554
      Anoob Soman authored 
      [ Upstream commit 66644982 ]

If a socket has FANOUT sockopt set, a new proto_hook is registered
as part of fanout_add(). When processing a NETDEV_UNREGISTER event in
af_packet, __fanout_unlink is called for all sockets, but prot_hook which was
registered as part of fanout_add is not removed. Call fanout_release, on a
NETDEV_UNREGISTER, which removes prot_hook and removes fanout from the
fanout_list.

This fixes BUG_ON(!list_empty(&dev->ptype_specific)) in netdev_run_todo()
Signed-off-by: default avatarAnoob Soman <anoob.soman@citrix.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      1bd84554
    • Andrew Collins's avatar
      net: Add netdev all_adj_list refcnt propagation to fix panic · a6109221
      Andrew Collins authored 
      [ Upstream commit 93409033 ]

This is a respin of a patch to fix a relatively easily reproducible kernel
panic related to the all_adj_list handling for netdevs in recent kernels.

The following sequence of commands will reproduce the issue:

ip link add link eth0 name eth0.100 type vlan id 100
ip link add link eth0 name eth0.200 type vlan id 200
ip link add name testbr type bridge
ip link set eth0.100 master testbr
ip link set eth0.200 master testbr
ip link add link testbr mac0 type macvlan
ip link delete dev testbr

This creates an upper/lower tree of (excuse the poor ASCII art):

            /---eth0.100-eth0
mac0-testbr-
            \---eth0.200-eth0

When testbr is deleted, the all_adj_lists are walked, and eth0 is deleted twice from
the mac0 list. Unfortunately, during setup in __netdev_upper_dev_link, only one
reference to eth0 is added, so this results in a panic.

This change adds reference count propagation so things are handled properly.

Matthias Schiffer reported a similar crash in batman-adv:

https://github.com/freifunk-gluon/gluon/issues/680
https://www.open-mesh.org/issues/247

which this patch also seems to resolve.

[js] 3.12 does not have lists yet.
Signed-off-by: default avatarAndrew Collins <acollins@cradlepoint.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      a6109221
  3. 24 Nov, 2016 36 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7