- 04 Feb, 2014 38 commits
-
-
Antti Palosaari authored
Add USB ID [2040:f900] for Hauppauge WinTV-MiniStick 2. Device is build upon IT9135 chipset. Tested-by:
Stefan Becker <schtefan@gmx.net> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Seppälä authored
There are reports[1] that on some motherboards loading the nuvoton-cir disables PS/2 keyboard input. This is caused by an erroneous write of CIR_INTR_MOUSE_IRQ_BIT to ACPI control register. According to datasheet the write enables mouse power management event interrupts which will probably have ill effects if the motherboard has only one PS/2 port with keyboard in it. The cir hardware does not need mouse interrupts to function and should not touch them. This patch removes the illegal writes and registry definitions. [1] http://ubuntuforums.org/showthread.php?t=2106277&p=12461912&mode=threaded#post12461912Reported-by:
Bruno Maire <bruno.maire@besonet.ch> Tested-by:
Antti Seppälä <a.seppala@gmail.com> Acked-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Joakim Hernberg authored
When tuning to 10818V on Astra 28E2, the system tunes to 11343V instead. This is a regression in the S471 driver introduced with the changeset: b43ea806 [media] cx23885: Fix TeVii S471 regression since introduction of ts2020. Suggested-by:
Joakim Hernberg <jhernberg@alchemy.lu> Tested-by:
Mark Clarkstone <hello@markclarkstone.co.uk> Signed-off-by:
-
Sean Young authored
A number of recent bug reports involve usb_submit_urb() failing which was only reported with debug parameter on. In addition, remove custom debug function. [m.chehab@samsung.com: patch rebased, as one of the patches on this series need changes] Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
Make the code simpler. Signed-off-by:
-
Sean Young authored
Just comments. No functional changes. Signed-off-by:
-
Frank Schaefer authored
Commit e63b009d "em28xx-i2c: Fix error code for I2C error transfers" changed the code to return -ETIMEDOUT on all unknown errors. But the proper error code for unknown errors is -EIO. So only report -ETIMEDOUT in case of the errors 0x02 and 0x04, which are according to Mauro Carvalho Chehab's tests related to i2c clock stretching and return -EIO for the rest. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
Commit d845fb3a "em28xx-i2c: add timeout debug information if i2c_debug enabled" has added wrong error descriptions for -ENXIO. The strings are also missing terminating newline characters, which breaks the output format. Signed-off-by:
-
Frank Schaefer authored
This avoids the unnecessary temporary registration of a dummy V4L2 clock. Signed-off-by:
-
Frank Schaefer authored
Since commit e63b009d the returned error code in case of not connected/responding i2c clients is ENXIO isntead of ENODEV, which causes several error messages on sensor probing. Fix the i2c return value checks on sensor probing to silence these warnings. Signed-off-by:
-
Frank Schaefer authored
[media] em28xx-video: do not unregister the v4l2 dummy clock before v4l2_device_unregister() has been called Otherwiese the core refuses to unregister the clock and the following warning appears in the system log: "WARNING: ... at drivers/media/v4l2-core/v4l2-clk.c:231 v4l2_clk_unregister+0x8a/0x90 [videodev]() v4l2_clk_unregister(): Refusing to unregister ref-counted 11-0030:mclk clock!" Signed-off-by:
-
Frank Schaefer authored
dev->adev.users always needs to be increased when snd_em28xx_capture_open() is called and succeeds. Signed-off-by:
-
James Hogan authored
Add a raw decoder for the Sharp protocol. It uses a pulse distance modulation with a pulse of 320us and a bit period of 2ms for a logical 1 and 1ms for a logical 0. The first part of the message consists of a 5-bit address, an 8-bit command, and two other bits, followed by a 40ms gap before the echo message which is an inverted version of the main message except for the address bits. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: linux-media@vger.kernel.org Signed-off-by:
-
James Hogan authored
Add Sharp infrared protocol constants RC_TYPE_SHARP and RC_BIT_SHARP. Signed-off-by:
-
James Hogan authored
Briefly document /sys/class/rc/ API for remote controller devices in Documentation/ABI/teting. Signed-off-by:
-
James Hogan authored
Since v3.12, specifically 153a60bb ([media] rc: add feedback led trigger for rc keypresses), an LED trigger is activated on IR keydown whether or not a keypress is generated (i.e. even if there's no matching keycode). However the repeat and keyup logic isn't used unless there is a keypress, which results in non-keypress keydown events turning on the LED and not turning it off again. On the assumption that the intent was for the LED only to light up on valid key presses (you probably don't want it lighting up for the wrong remote control for example), move the led_trigger_event() call inside the keycode check. Signed-off-by:
-
Georgi Chorbadzhiyski authored
Around 01/14/2014 06:07 PM, Mauro Carvalho Chehab scribbled: > Em Tue, 14 Jan 2014 17:55:19 +0200 > Georgi Chorbadzhiyski <gf@unixsol.org> escreveu: >> Around 01/14/2014 05:30 PM, Mauro Carvalho Chehab scribbled: >>> Em Tue, 14 Jan 2014 17:16:10 +0200 >>> Georgi Chorbadzhiyski <gf@unixsol.org> escreveu: > >>>> Hi guys, I'm confused the documentation on: > >>>> > >>>> http://linuxtv.org/downloads/v4l-dvb-apis/frontend_fcalls.html#FE_READ_SNR > >>>> http://linuxtv.org/downloads/v4l-dvb-apis/frontend_fcalls.html#FE_READ_SIGNAL_STRENGTH > >>>> > >>>> states that these ioctls return int16_t values but frontend.h states: > >>>> > >>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/include/uapi/linux/dvb/frontend.h > >>>> > >>>> #define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16) > >>>> #define FE_READ_SNR _IOR('o', 72, __u16) > >>>> > >>>> So which one is true? >>> Documentation is wrong. The returned values are unsigned. Would you mind send >>> us a patch fixing it? >> >> I would be happy to, but I can't find the repo that holds the documentation. > > It is in the Kernel tree, under Documentation/DocBook/media/dvb. The attached file contains the discussed documentation fixes. Signed-off-by:
-
Fengguang Wu authored
Fix sparse warning: drivers/media/rc/rc-main.c:27:1: sparse: symbol 'ir_core_dev_number' was not declared. Should it be static? Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Fengguang Wu authored
Fix sparse warning: drivers/media/usb/em28xx/em28xx-cards.c:69:1: sparse: symbol 'em28xx_devused' was not declared. Should it be static? Signed-off-by:
-
Hans Verkuil authored
This section was horribly out of date. A lot of references to old and obsolete behavior have been dropped. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
[m.chehab@samsung.com: removed "Opening and Closing Devices" from the list of changes, as the patch with such change weren't applied] Signed-off-by:
-
Hans Verkuil authored
The old table is most definitely wrong. All applications and all drivers that I have ever tested follow the corrected table. Furthermore, that's what all applications expect as well. Any drivers that do not follow the corrected table are broken and should be fixed. This patch drops the old table and replaces it with the corrected table. This should prevent a lot of confusion. Signed-off-by:
-
Hans Verkuil authored
Updates for the "Tuners and Modulators", "Video Standards" and "Digital Video (DV) Timings" sections. Besides lots of trivial little fixes the main changes are: - Remove two footnotes from "Video Standards": the first is a discussion of alternative methods of setting standards, which is pretty pointless since the standards API is effectively frozen anyway, and the second points to 'rationale' that makes little or no sense to me. - Clarify a few things in the "Digital Video (DV) Timings" section. It was awkwardly formatted as well: there used to be a list with multiple bullets that has been reduced to a single item, so drop the list and rewrite that text. Signed-off-by:
-
Hans Verkuil authored
Updates sections "Querying Capabilities", "Application Priority", "Video Inputs and Outputs" and "Audio Inputs and Outputs". Signed-off-by:
-
Hans Verkuil authored
It's now 2014, so update those copyright years. Also fix a typo in the introduction and mention that this document also covers output, codec and remote control devices. Signed-off-by:
-
Hans Verkuil authored
Mauro's old redhat email address is no longer valid, update to the current email address. Signed-off-by:
-
Hans Verkuil authored
The VESA standard added a version 2 of the reduced blanking formula. Note in the comment that this is not yet supported by the v4l2_detect_cvt function. Obviously this should be implemented eventually, but for now add this as a reminder. Signed-off-by:
-
Hans Verkuil authored
VESA added two new DMT timings in their latest standard document. Add these to v4l2-dv-timings.h. Signed-off-by:
-
sensoray-dev authored
Fixes all style warnings from scripts/checkpatch -f Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
-
Sachin Kamat authored
module_usb_driver eliminates the boilerplate and makes the code simpler. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Martin Bugge authored
This applies to HDMI-map register 0x69. So far we have been using HPA manual mode. This way we had control of HPA which could be set after EDID had been programmed. Using a Mac Mini with mini-displayport to DVI-D converter as source caused the adv7842 to lock up and fail to detect any further signals. After experimenting with different configurations it was found that using the HPA auto mode and in addition letting RX-termination be controlled by HPA prevented this error from occuring. I was not able to re-create this problem on the adv7604. Signed-off-by:
Martin Bugge <marbugge@cisco.com> Cc: Mats Randgaard <matrandg@cisco.com> Signed-off-by:
-
Martin Bugge authored
Clear any pending AVI checksum-errors. To be able to display last received AVI. Signed-off-by:
-
Martin Bugge authored
Incorrect registers used for pixelclock read-out. Same registers as for adv7604 which actually gave an almost correct read-out, even they are not documented for adv7842. Corrected deep-color pixel-clock correction. Signed-off-by:
-
Martin Bugge authored
If the input signal is DVI-D and quantization range is RGB full range, gain and offset must be adjusted to get the right range on the output. Copied and adopted from adv7604. Signed-off-by:
-
Hans Verkuil authored
I came across this while checking the kernel use of V4L2_CTRL_FLAG_DISABLED. This flag should not be used with the control framework. Instead, just don't add the control at all. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hans Verkuil authored
This define uses the deprecated interruptible_sleep_on_timeout function. Since this define is unused anyway we just remove it. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Hans Verkuil authored
usbtv-video.c needs module.h. So move the module.h include from usbtv-core.c to usbtv.h, that way both core.c and video.c have it. Signed-off-by:
-
Federico Simoncelli authored
Signed-off-by:
Federico Simoncelli <fsimonce@redhat.com> Reviewed-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
- 03 Feb, 2014 2 commits
-
-
Mauro Carvalho Chehab authored
Linus 3.14-rc1 * tag 'v3.14-rc1': (11781 commits) Linus 3.14-rc1 hpfs: optimize quad buffer loading hpfs: remember free space parisc: add flexible mmap memory layout support parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc parisc: convert uapi/asm/stat.h to use native types only parisc: wire up sched_setattr and sched_getattr parisc: fix cache-flushing parisc/sti_console: prefer Linux fonts over built-in ROM fonts hwmon: Fix SENSORS_TMP102 dependencies to eliminate build errors hwmon: Fix SENSORS_LM75 dependencies to eliminate build errors tools/power turbostat: introduce -s to dump counters tools/power turbostat: remove unused command line option afs: proc cells and rootcell are writeable tile: remove compat_sys_lookup_dcookie declaration to fix compile error Revert "PCI: Remove from bus_list and release resources in pci_release_dev()" ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA ARM: multi_v7_defconfig: add mvebu drivers clocksource: kona: Add basic use of external clock drivers: bus: fix CCI driver kcalloc call parameters swap ...
-
Linus Torvalds authored
-
