Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.3
- SPDX updates
- switch to generic ethernet PHY reset bindings
- add the canvas module
- mxiii-plus board: add regulators

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: switch to the generic Ethernet PHY reset bindings
  ARM: dts: meson8b: update with SPDX Licence identifier
  ARM: dts: meson8b-odroidc1: update with SPDX Licence identifier
  ARM: dts: meson8b-mxq: update with SPDX Licence identifier
  ARM: dts: meson8: update with SPDX Licence identifier
  ARM: dts: meson8-minix-neo-x8: update with SPDX Licence identifier
  ARM: dts: meson6: update with SPDX Licence identifier
  ARM: dts: meson6-atv1200: update with SPDX Licence identifier
  ARM: dts: meson: update with SPDX Licence identifier
  ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805
  ARM: dts: meson8m2: mxiii-plus: add the supply for the Mali GPU
  ARM: dts: meson8m2: mxiii-plus: rename the DCDC2 regulator
  ARM: dts: meson8b: add the canvas module
  ARM: dts: meson8m2: update the offset of the canvas module
  ARM: dts: meson8: add the canvas module
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt

This pull request adds CPUFreq support for DA850 boards in device-tree
boot using the generic CPUFREQ_DT driver.

* tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: Enable CPUFREQ_DT
  ARM: dts: da850-evm: enable cpufreq
  ARM: dts: da850-lcdk: enable cpufreq
  ARM: dts: da850-lego-ev3: enable cpufreq
  ARM: dts: da850: add cpu node and operating points to DT
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.3

We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.

There are some AST2500 machines under development:

  * Lenovo Hr630
  * IBM Swift
  * Facebook YAMP

And some AST2400 machines that have been around but out of tree and have
now joined the party:

  * YADRO VESNIN
  * Microsoft Olympus

* tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Enable video engine on romulus and wtherspoon
  ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
  ARM: dts: aspeed: Add YADRO VESNIN BMC
  ARM: dts: aspeed: Add Microsoft Olympus BMC
  ARM: dts: aspeed: Adding Lenovo Hr630 BMC
  ARM: dts: aspeed: Add Facebook YAMP BMC
  ARM: dts: aspeed: swift: Add pca9539 devices
  ARM: dts: aspeed: Add Swift BMC machine
  ARM: dts: aspeed: cmm: enable ehci host controllers
  ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
  ARM: dts: aspeed: zaius: update 12V brick I2C address
  ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
  ARM: dts: aspeed: quanta-q71: Enable p2a node
  ARM: dts: aspeed: Add aspeed-p2a-ctrl node
  ARM: dts: aspeed: Add Power9 and Power9 CFAM description
  ARM: dts: aspeed: Rename flash-controller nodes
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm Device Tree Changes for v5.3

* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064

* tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: msm8974-hammerhead: add support for display
  ARM: dts: msm8974: add display support
  ARM: dts: qcom: msm8974-hammerhead: add support for backlight
  ARM: dts: qcom: msm8974-hammerhead: add touchscreen support
  ARM: dts: qcom-msm8974: Update coresight DT bindings
  ARM: dts: qcom-apq8064: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 Updates for v5.3

* Switch to use second gen PON on PM8998
* Add PSCI cupidle states for MSM8996, MSM8998,and SDM845
* Add MSM8996 UFS phy reset controller
* Add propre cpu capacity scaling on MSM8996
* Fixups for APR domain, legacy clocks, and PSCI entry latency on MSM8996
* Enable SMMUs on MSM8996
* Add Dragonboard 845C
* Add Q6V5, GPU, GMU, and AOSS QMP node on SDM845
* Fixup CPU topology on SDM845
* Change USB1 to be peripheral on SDM845 MTP
* Add PCIe Phy, RC nodes, ANOC1 SMMU, and RPMPD node on MSM8998
* Update coresight bindings for MSM8916
* Update idle state names and entry-method on MSM8916
* Add PCIe, RPMPD, LPASS, Q6, TCSR, TuringCC, PSCI cpuidle states,
  and CDSP on QCS404
* Add reset-cells property to QCS404 GCC node
* Fixup s3 max voltage, l3 min voltage, drive strength typo, and
  s3 supply definition on QCS404-evb
* Fixup ADC outputs and VADC calibration on PMS405

* tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits)
  arm64: dts: qcom: qcs404-evb: fix vdd_apc supply
  arm64: dts: qcom: pm8998: Use qcom,pm8998-pon binding for second gen pon
  arm64: dts: qcom: msm8996: Enable SMMUs
  arm64: dts: qcom: msm8996: Correct apr-domain property
  arm64: dts: qcom: Add Dragonboard 845c
  arm64: dts: qcom: qcs404-evb: Enable PCIe
  arm64: dts: qcom: qcs404: Add PCIe related nodes
  arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes
  arm64: dts: qcom: msm8998: Add ANOC1 SMMU node
  arm64: dts: qcom: msm8996: Stop using legacy clock names
  arm64: dts: msm8996: fix PSCI entry-latency-us
  arm64: dts: qcom: msm8998: Add PSCI cpuidle low power states
  arm64: dts: qcom: sdm845: Add Q6V5 MSS node
  arm64: dts: qcom: Add AOSS QMP node
  arm64: dts: qcom-qcs404: Add reset-cells to GCC node
  arm64: dts: qcom-msm8916: Update coresight DT bindings
  arm64: dts: qcom: msm8998: Add rpmpd node
  arm64: dts: qcom: qcs404: Add rpmpd node
  arm64: dts: qcom: qcs404: Move lpass and q6 into soc
  arm64: dts: qcom: qcs404: Fully describe the CDSP
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: DT: Hisilicon ARM32 SoCs updates for v5.3

- Updated CoreSight funnel and replicator using new bindings to fix warning
  for the hip04.

* tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hip04: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: Hisilicon SoCs DT updates for v5.3

* Hi3660 SoC and related boards:
  - Added CoreSight trace components

* Hi6220 SoC and related boards:
  - Updated CoreSight funnel and replicator using new bindings to fix warning

* tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hi3660: Add CoreSight support
  arm64: dts: hi6220: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contain Broadcom ARM-based SoCs Device Tree changes
for 5.3 please pull the following:

- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
  controller

- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
  and provides a fix for devices failing to boot after the removal of
  skelton.dtsi (that commit has been submitted as a separate fix)

* tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: Fix most DTC W=1 warnings
  ARM: dts: NSP: Fix the bulk of W=1 DTC warnings
  ARM: dts: BCM63xx: Fix DTC W=1 warnings
  ARM: dts: BCM53573: Fix DTC W=1 warnings
  ARM: dts: bcm-mobile: Fix most DTC W=1 warnings
  ARM: dts: Cygnus: Fix most DTC W=1 warnings
  ARM: dts: Fix BCM7445 DTC warnings
  ARM: bcm283x: Enable DMA support for SPI controller
  ARM: dts: bcm: Add missing device_type = "memory" property
Signed-off-by: Olof Johansson <olof@lixom.net>

Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Fix the the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
warnings.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Fixes a number of unit_address_vs_reg warnings:

  DTC     arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb
arch/arm/boot/dts/bcm7445.dtsi:66.6-225.4: Warning (unit_address_vs_reg): /rdb: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/bcm7445.dtsi:227.21-298.4: Warning (unit_address_vs_reg): /memory_controllers: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/bcm7445-bcm97445svmb.dts:9.9-14.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/bcm7445.dtsi:255.10-275.5: Warning (simple_bus_reg): /memory_controllers/memc@1: simple-bus unit address format error, expected "80000"
arch/arm/boot/dts/bcm7445.dtsi:277.10-297.5: Warning (simple_bus_reg): /memory_controllers/memc@2: simple-bus unit address format error, expected "100000"
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This pull requests enables DMA support for the main SPI controller
on all Raspberry Pis.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Without this, the driver for the BCM2835 SPI controller uses interrupt
mode instead of DMA mode, incurring a significant performance penalty.
The Foundation's device tree has had these attributes for years, but for
some reason they were never upstreamed.

They were originally contributed by Noralf Trønnes and Martin Sperl:
https://github.com/raspberrypi/linux/commit/25f3e064afc8
https://github.com/raspberrypi/linux/commit/e0edb52b47e6

The DREQ numbers 6 and 7 are documented in section 4.2.1.3 of:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdfTested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Noralf Trønnes <noralf@tronnes.org>

The snps,reset-gpio bindings are deprecated in favour of the generic
"Ethernet PHY reset" bindings.

Replace snps,reset-gpio from the &ethmac node with reset-gpios in the
ethernet-phy node. The old snps,reset-active-low property is now encoded
directly as GPIO flag inside the reset-gpios property.

snps,reset-delays-us is converted to reset-assert-us and
reset-deassert-us. reset-assert-us is the second cell from
snps,reset-delays-us while reset-deassert-us was the third cell.
Instead of blindly copying the old values (which seems strange since
they gave the PHY one second to come out of reset) over this also
updates the delays based on the datasheets:
- RTL8211F PHY on the Odroid-C1 and MXIII-Plus needs a 10ms assert
  delay (the datasheet mentions: "For a complete PHY reset, this pin
  must be asserted low for at least 10ms") and a 30ms deassert delay
  (the datasheet mentions: "Wait for a further 30ms (for internal
  circuits settling time) before accessing the PHY register"). The
  old settings used 10ms for assert and 1000ms for deassert.
- IP101GR PHY on the EC-100 and MXQ needs a 10ms assert delay (the
  datasheet mentions: "Trst | Reset period | 10ms") and a 10ms deassert
  delay as well (the datasheet mentions: "Tclk_MII_rdy | MII/RMII clock
  output ready after reset released | 10ms")). The old settings used
  10ms for assert and 1000ms for deassert.

No functional changes intended.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Enable the video engine and add it's optional reserved memory region.
Use 32MB for the reserved memory since the video engine could need up to
two 1920x1200@32bpp source buffers.

Source buffers: 2 * 1920 * 1200 * 4 = 18432000 bytes
In addition, the V4L2 subsystem will allocate any number of compression
buffers, each at most 1/8th the size of the source buffer.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The fp5280g2 is an OpenPower server platform with an ASPEED AST2500 BMC.
Signed-off-by: John Wang <wangzqbj@inspur.com>
Reviewed-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The invalid definition in the supply causes the Qualcomm's EVB-1000
and EVB-4000 not to boot.

Fix the boot issue by correctly defining the supply: vdd_s3 (namely
"vdd_apc") is actually connected to vph_pwr.
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>

Merge tag 'ti-k3-soc-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC family changes for 5.3

- Add support for the new J721e SoC, includes basic peripherals needed for
  booting up the device
- New peripheral support added for AM654x:
  * TI SCI irqchip
  * GPIO
  * MCU SRAM
  * R5Fs
  * MSMC RAM
  * SERDES and PCIe

* tag 'ti-k3-soc-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: (26 commits)
  arm64: dts: ti: k3-j721e: Add the MCU SRAM node
  arm64: dts: ti: k3-j721e: Add interrupt controllers in wakeup domain
  arm64: dts: ti: k3-j721e: Add interrupt controllers in main domain
  arm64: dts: ti: k3-j721e-main: Add Main NavSS Interrupt controller node
  arm64: defconfig: Enable TI's J721E SoC platform
  arm64: dts: ti: Add support for J721E Common Processor Board
  soc: ti: Add Support for J721E SoC config option
  arm64: dts: ti: Add Support for J721E SoC
  dt-bindings: serial: 8250_omap: Add compatible for J721E UART controller
  dt-bindings: arm: ti: Add bindings for J721E SoC
  arm64: dts: ti: am654-base-board: Disable SERDES and PCIe
  arm64: dts: k3-am6: Add PCIe Endpoint DT node
  arm64: dts: k3-am6: Add PCIe Root Complex DT node
  arm64: dts: k3-am6: Add SERDES DT node
  arm64: dts: k3-am6: Add mux-controller DT node required for muxing SERDES
  arm64: dts: k3-am6: Add "socionext,synquacer-pre-its" property to gic_its
  arm64: dts: ti: k3-am65: Add MSMC RAM ranges in interconnect node
  arm64: dts: ti: k3-am65: Add R5F ranges in interconnect nodes
  arm64: dts: ti: k3-am65-mcu: Add the MCU RAM node
  arm64: dts: ti: k3-am65: Add MCU SRAM ranges in interconnect nodes
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.3
- Use the new "altr,socfpga-stmmac-a10-s10" for the EMAC controllers on
  Arria10/Stratix10
- Add the ltc2497 i2c entry on the Arria10 devkit
- Add the EMAC OCP reset property on the Arria10

* tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: arria10: Add EMAC OCP reset property
  ARM: dts: socfpga: add ltc2497 on arria10 devkit
  arm64: dts: stratix10: use the "altr,socfpga-stmmac-a10-s10" binding
  ARM: dts: socfpga: use the "altr,socfpga-stmmac-a10-s10" binding
Signed-off-by: Olof Johansson <olof@lixom.net>

CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.

This patch switches to the new bindings for CoreSight dynamic funnel and
static replicator, so can dismiss warning during initialisation.

Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This patch adds DT bindings for the CoreSight trace components
on hi3660, which is used by 96boards Hikey960.
Signed-off-by: Wanglai Shi <shiwanglai@hisilicon.com>
Reviewed-and-tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.

This patch switches to the new bindings for CoreSight dynamic funnel and
static replicator, so can dismiss warning during initialisation.

Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Merge tag 'samsung-dt-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.3

1. Fixes for minor warnings.
2. Enable ADC on Exynos5410 Odroid XU board.

* tag 'samsung-dt-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add ADC node to Exynos5410 and Odroid XU
  ARM: dts: exynos: Raise maximum buck regulator voltages on Arndale Octa
  ARM: dts: exynos: Move CPU OPP tables out of SoC node on Exynos5420
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'vexpress-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt

ARMv7 Vexpress updates for v5.3

1. Couple of updates switching to use new/updated bindings for CoreSight
   dynamic funnel components and NOR flash partition type
2. Disable NOR flash on Vexpress TC2 platform as it conflicts with CPU
   power management. This follows what we have on ARMv8 Juno platform
   and is required after recent commit that enabled CFI NOR FLASH in
   multi_v7 defconfig

* tag 'vexpress-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  ARM: dts: vexpress: set the right partition type for NOR flash
  arm: dts: vexpress-v2p-ca15_a7: disable NOR flash node by default
  ARM: dts: vexpress-v2p-ca15_a7: update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'juno-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt

ARMv8 Juno updates for v5.3

Couple of updates switching to use new/updated bindings for CoreSight
dynamic funnel components and NOR flash partition type

* tag 'juno-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: set the right partition type for NOR flash
  arm64: dts: juno: update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.3/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

ti-sysc dts changes for v5.3

We can now drop the custom dts property "ti,hwmods" for drivers that
have the ti-sysc interconnect target module configured in dts.

Let's start with a minimal changes to omap4 uart and mmc. We use
omap4 as the starting point as it has runtime PM implemented and all
the omap variants after that are based on it with similar clkctrl
clock for the modules. More devices will be updated later on as they
get tested.

Note that these changes are based on the related ti-sysc driver
changes.

* tag 'omap-for-v5.3/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
  ARM: dts: Drop legacy custom hwmods property for omap4 mmc
  ARM: dts: Drop legacy custom hwmods property for omap4 uart
  bus: ti-sysc: Detect uarts also on omap34xx
  bus: ti-sysc: Do rstctrl reset handling in two phases
  bus: ti-sysc: Add support for disabling module without legacy mode
  bus: ti-sysc: Set ENAWAKEUP if available
  bus: ti-sysc: Handle swsup idle mode quirks
  bus: ti-sysc: Handle clockactivity for enable and disable
  bus: ti-sysc: Enable interconnect target module autoidle bit on enable
  bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set
  bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits
  bus: ti-sysc: Support 16-bit writes too
  bus: ti-sysc: Add support for missing clockdomain handling
  ARM: dts: dra71x: Disable usb4_tm target module
  ARM: dts: dra71x: Disable rtc target module
  ARM: dts: dra76x: Disable usb4_tm target module
  ARM: dts: dra76x: Disable rtc target module
  ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
  ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
  bus: ti-sysc: Handle devices with no control registers
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

dts changes for omap variants for v5.3

This series of changes improves support for few boards:

- configure another lcd type for logicpd torpedo devkit

- a series of updates for am335x phytec boards

- configure mmc card detect pin for am335x-baltos

* tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-baltos: add support for MMC1 CD pin
  ARM: dts: am335x-baltos: Fix PHY mode for ethernet
  ARM: dts: Add support for phyBOARD-REGOR-AM335x
  ARM: dts: am335x-pcm-953: Remove eth phy delay
  ARM: dts: am335x-pcm-953: Update user led names
  ARM: dts: am335x-phycore-som: Enable gpmc node in dts files
  ARM: dts: am335x-phycore-som: Add emmc node
  ARM: dts: am335x phytec boards: Remove regulator node
  ARM: dts: Add LCD type 28 support to LogicPD Torpedo DM3730 devkit
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.3, please pull the following:

- Pramod adds the Device Tree nodes for thermal support on Stingray

- Srinath adds the Device Tree nodes for both XHCI (host) and BDC
  (device) modes

- Rayagonda adds the Device Tree node for slave I2C operation when
  Stingray operates as a SmartNIC

* tag 'arm-soc/for-5.3/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: Stingray: Add NIC i2c device node
  arm64: dts: Add USB DT nodes for Stingray SoC
  arm64: dts: stingray: Add Stingray Thermal DT support.
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

PCIe for rockpro64, wifi+bt for Rock-PI4, spi for Rock960 family
and a fix for the yet unused isp-iommus.

* tag 'v5.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: add WiFi+BT support on ROCK Pi4 board
  arm64: dts: rockchip: fix isp iommu clocks and power domain
  arm64: dts: rockchip: Enable SPI1 on Ficus
  arm64: dts: rockchip: Enable SPI0 and SPI4 on Rock960
  arm64: dts: rockchip: add PCIe nodes on rk3399-rockpro64
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

A lot more love for rk3288 in general and veyron specially with changes
all over the place.

* tag 'v5.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
  ARM: dts: rockchip: Split GPIO keys for veyron into multiple devices
  ARM: dts: rockchip: Add HDMI i2c unwedging for rk3288-veyron
  ARM: dts: rockchip: Add unwedge pinctrl entries for dw_hdmi on rk3288
  ARM: dts: rockchip: Switch to builtin HDMI DDC bus on rk3288-veyron
  ARM: dts: rockchip: Add pin names for rk3288-veyron jaq, mickey, speedy
  ARM: dts: rockchip: fix pwm-cells for rk3288's pwm3
  ARM: dts: rockchip: Configure the GPU thermal zone for mickey
  ARM: dts: rockchip: Use the GPU to cool CPU thermal zone of veyron mickey
  ARM: dts: rockchip: remove GPU 500 MHz OPP on rk3288
  ARM: dts: rockchip: Use GPU as cooling device for the GPU thermal zone of the rk3288
  ARM: dts: rockchip: Add #cooling-cells entry for rk3288 GPU
  ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend
  ARM: dts: rockchip: Add pin names for rk3288-veyron-jerry
  ARM: dts: rockchip: Add pin names for rk3288-veyron-minnie
  ARM: dts: raise GPU trip point temperature for speedy to 80 degC
  ARM: dts: rockchip: raise GPU trip point temperatures for veyron
  ARM: dts: rockchip: raise CPU trip point temperature for veyron to 100 degC
  ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200
  ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again
  ARM: dts: rockchip: Remove bogus 'i2s_clk_out' from rk3288-veyron-mickey
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds a reset-cells property to the gcc controller on the QCS404.
Without this in place, we get warnings like the following if nodes reference
a gcc reset:

arch/arm64/boot/dts/qcom/qcs404.dtsi:261.38-310.5: Warning (resets_property):
/soc@0/remoteproc@b00000: Missing property '#reset-cells' in node
/soc@0/clock-controller@1800000 or bad phandle (referred from resets[0])
  also defined at arch/arm64/boot/dts/qcom/qcs404-evb.dtsi:82.18-84.3
  DTC     arch/arm64/boot/dts/qcom/qcs404-evb-4000.dtb
arch/arm64/boot/dts/qcom/qcs404.dtsi:261.38-310.5: Warning (resets_property):
/soc@0/remoteproc@b00000: Missing property '#reset-cells' in node
/soc@0/clock-controller@1800000 or bad phandle (referred from resets[0])
  also defined at arch/arm64/boot/dts/qcom/qcs404-evb.dtsi:82.18-84.3
Signed-off-by: Andy Gross <agross@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add one Spreadtrum SD host controller to support eMMC card for Spreadtrum
SC9860 platform.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'integrator-dts-v5.3-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt

DTS updates for the Integrator, target kernel v5.3.

* tag 'integrator-dts-v5.3-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: vexpress: specify AFS partition
  ARM: dts: realview: specify AFS partition
  ARM: dts: versatile: specify AFS partition
  ARM: dts: integrator: specify AFS partition
Signed-off-by: Olof Johansson <olof@lixom.net>

Add the on-chip SRAM present within the MCU domain as a mmio-sram node.
The K3 J721E SoCs have 1 MB of such memory. Any specific memory range
within this RAM needed by a driver/software module ought to be reserved
using an appropriate child node.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Wakeup domain in J721E SoC has an interrupt router connected to gpio
in wakeup domain. Add DT node for this interrupt router.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Main domain in J721E has the following interrupt controller instances:
- Main Domain GPIO Interrupt router connected to gpio in main domain.
- Under the Main Domain Navigator Subsystem(NAVSS)
	- Main Navss Interrupt Router connected to main navss inta and mailboxes.
	- Main Navss Interrupt Aggregator connected to main domain UDMASS

Add DT nodes for the interrupt controllers available in main domain.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>