- 19 Feb, 2019 1 commit
-
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.0 A few small fixes, a driver fix for Samsung, a fix for refcounting of of_nodes in the simple-card driver that triggered on a lot of systems and a fix for topology error handling.
-
- 18 Feb, 2019 2 commits
-
-
Kuninori Morimoto authored
commit da215354 ("ASoC: simple-card: merge simple-scu-card") merged simple-card and simple-scu-card. Then it had refcount underflow bug. This patch fixup it. We will get below error without this patch. OF: ERROR: Bad of_node_put() on /sound CPU: 3 PID: 237 Comm: kworker/3:1 Not tainted 5.0.0-rc6+ #1514 Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT) Workqueue: events deferred_probe_work_func Call trace: dump_backtrace+0x0/0x150 show_stack+0x24/0x30 dump_stack+0xb0/0xec of_node_release+0xd0/0xd8 kobject_put+0x74/0xe8 of_node_put+0x24/0x30 __of_get_next_child+0x50/0x70 of_get_next_child+0x40/0x68 asoc_simple_card_probe+0x604/0x730 platform_drv_probe+0x58/0xa8 ... Reported-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Bard liao authored
Topology resources are no longer needed if any element failed to load. Signed-off-by:
Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
- 14 Feb, 2019 2 commits
-
-
Hui Wang authored
It is reported that there's a constant background "hum/whitenoise" in the headset on the Lenovo X1 machines with the codec alc285, and it is confirmed that if we run the command below, the noise will stop. sudo hda-verb /dev/snd/hwC0D0 0x1d SET_PIN_WIDGET_CONTROL 0x0 Then I consulted this issue with Kailang, he told me the pin 0x1d on this codec is used for PC beep in, the noise probably comes from this pin and we can also disable the PC beep in passthrough, then the PC beep in will not affect other sound playback. Fixes: c4cfcf6f ("ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1660581 Cc: <stable@vger.kernel.org> Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jeremy Soller authored
On the System76 Oryx Pro (oryp5), there is a headset microphone input attached to 0x19 that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and the ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is similar to the MIC_NO_PRESENCE fixups for some Dell laptops, except we have a separate microphone jack that is already configured correctly. Since the ALC1220 does not have a fixup similar to ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, I have exposed the fixup from the ALC269 in a way that it can be accessed from the alc1220_fixup_system76_oryp5 function. In addition, the alc1220_fixup_clevo_p950 needs to be applied to gain speaker output. Signed-off-by:
Jeremy Soller <jeremy@system76.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 12 Feb, 2019 1 commit
-
-
Sylwester Nawrocki authored
Make sure i2s->rclk_srcrate is properly initialized also during playback through the secondary DAI. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
- 08 Feb, 2019 2 commits
-
-
Takashi Iwai authored
In the commit 62ba568f ("ALSA: pcm: Return 0 when size < start_threshold in capture"), we changed the behavior of __snd_pcm_lib_xfer() to return immediately with 0 when a capture stream has a high start_threshold. This was intended to be a correction of the behavior consistency and looked harmless, but this was the culprit of the recent breakage reported by syzkaller, which was fixed by the commit e190161f ("ALSA: pcm: Fix tight loop of OSS capture stream"). At the time for the OSS fix, I didn't touch the behavior for ALSA native API, as assuming that this behavior actually is good. But this turned out to be also broken actually for a similar deployment, e.g. one thread goes to a write loop in blocking mode while another thread controls the start/stop of the stream manually. Overall, the original commit is harmful, and it brings less merit to keep that behavior. Let's revert it. Fixes: 62ba568f ("ALSA: pcm: Return 0 when size < start_threshold in capture") Fixes: e190161f ("ALSA: pcm: Fix tight loop of OSS capture stream") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.0 A selection of driver specific fixes here, along with a few core fixes: - A fixup for some MFD devices that were broken by the previous fixes for deferred probe. - A fix for potential out of bounds array accesses when ordering DAPM power/up down sequences. - Avoid use after free issue when unloading and reloading drivers using topologies.
-
- 07 Feb, 2019 4 commits
-
-
Manuel Reinhardt authored
The commit a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") introduced an error in the handling of quirks for implicit feedback endpoints. This commit fixes this. If a quirk successfully sets up an implicit feedback endpoint, usb-audio no longer tries to find the implicit fb endpoint itself. Fixes: a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") Signed-off-by:
Manuel Reinhardt <manuel.rhdt@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jurica Vukadin authored
This enables mute LED support and fixes switching jacks when the laptop is docked. Signed-off-by:
Jurica Vukadin <jurica.vukadin@rt-rk.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sylwester Nawrocki authored
This patch moves clk_get_rate() call from trigger() to hw_params() callback to avoid calling sleeping clk API from atomic context and prevent deadlock as indicated below. Before this change clk_get_rate() was being called with same spinlock held as the one passed to the clk API when registering clocks exposed by the I2S driver. [ 82.109780] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 82.117009] in_atomic(): 1, irqs_disabled(): 128, pid: 1554, name: speaker-test [ 82.124235] 3 locks held by speaker-test/1554: [ 82.128653] #0: cc8c5328 (snd_pcm_link_rwlock){...-}, at: snd_pcm_stream_lock_irq+0x20/0x38 [ 82.137058] #1: ec9eda17 (&(&substream->self_group.lock)->rlock){..-.}, at: snd_pcm_ioctl+0x900/0x1268 [ 82.146417] #2: 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.154650] irq event stamp: 8144 [ 82.157949] hardirqs last enabled at (8143): [<c0a0f574>] _raw_read_unlock_irq+0x24/0x5c [ 82.166089] hardirqs last disabled at (8144): [<c0a0f6a8>] _raw_read_lock_irq+0x18/0x58 [ 82.174063] softirqs last enabled at (8004): [<c01024e4>] __do_softirq+0x3a4/0x66c [ 82.181688] softirqs last disabled at (7997): [<c012d730>] irq_exit+0x140/0x168 [ 82.188964] Preemption disabled at: [ 82.188967] [<00000000>] (null) [ 82.195728] CPU: 6 PID: 1554 Comm: speaker-test Not tainted 5.0.0-rc5-00192-ga6e6caca8f03 #191 [ 82.204302] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.210376] [<c0111a54>] (unwind_backtrace) from [<c010d8f4>] (show_stack+0x10/0x14) [ 82.218084] [<c010d8f4>] (show_stack) from [<c09ef004>] (dump_stack+0x90/0xc8) [ 82.225278] [<c09ef004>] (dump_stack) from [<c0152980>] (___might_sleep+0x22c/0x2c8) [ 82.232990] [<c0152980>] (___might_sleep) from [<c0a0a2e4>] (__mutex_lock+0x28/0xa3c) [ 82.240788] [<c0a0a2e4>] (__mutex_lock) from [<c0a0ad80>] (mutex_lock_nested+0x1c/0x24) [ 82.248763] [<c0a0ad80>] (mutex_lock_nested) from [<c04923dc>] (clk_prepare_lock+0x78/0xec) [ 82.257079] [<c04923dc>] (clk_prepare_lock) from [<c049538c>] (clk_core_get_rate+0xc/0x5c) [ 82.265309] [<c049538c>] (clk_core_get_rate) from [<c0766b18>] (i2s_trigger+0x490/0x6d4) [ 82.273369] [<c0766b18>] (i2s_trigger) from [<c074fec4>] (soc_pcm_trigger+0x100/0x140) [ 82.281254] [<c074fec4>] (soc_pcm_trigger) from [<c07378a0>] (snd_pcm_do_start+0x2c/0x30) [ 82.289400] [<c07378a0>] (snd_pcm_do_start) from [<c07376cc>] (snd_pcm_action_single+0x38/0x78) [ 82.298065] [<c07376cc>] (snd_pcm_action_single) from [<c073a450>] (snd_pcm_ioctl+0x910/0x1268) [ 82.306734] [<c073a450>] (snd_pcm_ioctl) from [<c0292344>] (do_vfs_ioctl+0x90/0x9ec) [ 82.314443] [<c0292344>] (do_vfs_ioctl) from [<c0292cd4>] (ksys_ioctl+0x34/0x60) [ 82.321808] [<c0292cd4>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28) [ 82.329431] Exception stack(0xeb875fa8 to 0xeb875ff0) [ 82.334459] 5fa0: 00033c18 b6e31000 00000004 00004142 00033d80 00033d80 [ 82.342605] 5fc0: 00033c18 b6e31000 00008000 00000036 00008000 00000000 beea38a8 00008000 [ 82.350748] 5fe0: b6e3142c beea384c b6da9a30 b6c9212c [ 82.355789] [ 82.357245] ====================================================== [ 82.363397] WARNING: possible circular locking dependency detected [ 82.369551] 5.0.0-rc5-00192-ga6e6caca8f03 #191 Tainted: G W [ 82.376395] ------------------------------------------------------ [ 82.382548] speaker-test/1554 is trying to acquire lock: [ 82.387834] 6d2007f4 (prepare_lock){+.+.}, at: clk_prepare_lock+0x78/0xec [ 82.394593] [ 82.394593] but task is already holding lock: [ 82.400398] 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.408197] [ 82.408197] which lock already depends on the new lock. [ 82.416343] [ 82.416343] the existing dependency chain (in reverse order) is: [ 82.423795] [ 82.423795] -> #1 (&(&pri_dai->spinlock)->rlock){..-.}: [ 82.430472] clk_mux_set_parent+0x34/0xb8 [ 82.434975] clk_core_set_parent_nolock+0x1c4/0x52c [ 82.440347] clk_set_parent+0x38/0x6c [ 82.444509] of_clk_set_defaults+0xc8/0x308 [ 82.449186] of_clk_add_provider+0x84/0xd0 [ 82.453779] samsung_i2s_probe+0x408/0x5f8 [ 82.458376] platform_drv_probe+0x48/0x98 [ 82.462879] really_probe+0x224/0x3f4 [ 82.467037] driver_probe_device+0x70/0x1c4 [ 82.471716] bus_for_each_drv+0x44/0x8c [ 82.476049] __device_attach+0xa0/0x138 [ 82.480382] bus_probe_device+0x88/0x90 [ 82.484715] deferred_probe_work_func+0x6c/0xbc [ 82.489741] process_one_work+0x200/0x740 [ 82.494246] worker_thread+0x2c/0x4c8 [ 82.498408] kthread+0x128/0x164 [ 82.502131] ret_from_fork+0x14/0x20 [ 82.506204] (null) [ 82.508976] [ 82.508976] -> #0 (prepare_lock){+.+.}: [ 82.514264] __mutex_lock+0x60/0xa3c [ 82.518336] mutex_lock_nested+0x1c/0x24 [ 82.522756] clk_prepare_lock+0x78/0xec [ 82.527088] clk_core_get_rate+0xc/0x5c [ 82.531421] i2s_trigger+0x490/0x6d4 [ 82.535494] soc_pcm_trigger+0x100/0x140 [ 82.539913] snd_pcm_do_start+0x2c/0x30 [ 82.544246] snd_pcm_action_single+0x38/0x78 [ 82.549012] snd_pcm_ioctl+0x910/0x1268 [ 82.553345] do_vfs_ioctl+0x90/0x9ec [ 82.557417] ksys_ioctl+0x34/0x60 [ 82.561229] ret_fast_syscall+0x0/0x28 [ 82.565477] 0xbeea384c [ 82.568421] [ 82.568421] other info that might help us debug this: [ 82.568421] [ 82.576394] Possible unsafe locking scenario: [ 82.576394] [ 82.582285] CPU0 CPU1 [ 82.586792] ---- ---- [ 82.591297] lock(&(&pri_dai->spinlock)->rlock); [ 82.595977] lock(prepare_lock); [ 82.601782] lock(&(&pri_dai->spinlock)->rlock); [ 82.608975] lock(prepare_lock); [ 82.612268] [ 82.612268] *** DEADLOCK *** Fixes: 647d04f8 ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined") Reported-by: -
Jiada Wang authored
Currently "0xf << 36" is used to clear SSIU-9 internal buffer state, which overflows 32-bit value according to user reference manual, it is always bit4 ~ bit7 of SSI_SYS_STATUS[1,3,5,7] registers indicate SSIU-9's buffer state, so "0xf << 4" should be used. This patch fix incorrect shifting issue in SSIU-9 case Fixes: commit b7169dde ("ASoC: rsnd: remove RSND_REG_ from rsnd_reg") Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Acked-by:
-
- 06 Feb, 2019 3 commits
-
-
Kuninori Morimoto authored
commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") added new rsnd_ssi_prepare() and moved rsnd_ssi_master_clk_start() to .prepare. But, ssi user count (= ssi->usrcnt) is incremented at .init (= rsnd_ssi_init()). Because of these timing exchange, ssi->usrcnt check at rsnd_ssi_master_clk_start() should be adjusted. Otherwise, 2nd master clock setup will be no check. This patch fixup this issue. Fixes: commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Reported-by:
Yusuke Goda <yusuke.goda.sx@renesas.com> Reported-by:
Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by:
-
Pierre-Louis Bossart authored
KASAN reports and additional traces point to out-of-bounds accesses to the dapm_up_seq and dapm_down_seq lookup tables. The indices used are larger than the array definition. Fix by adding missing entries for the new widget types in these two lookup tables, and align them with PGA values. Also the sequences for the following widgets were not defined. Since their values defaulted to zero, assign them explicitly snd_soc_dapm_input snd_soc_dapm_output snd_soc_dapm_vmid snd_soc_dapm_siggen snd_soc_dapm_sink Fixes: 8a70b454 ('ASoC: dapm: Add new widget type for constructing DAPM graphs on DSPs.'). Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
A call of pci_iounmap() call without CONFIG_PCI leads to a build error on some architectures. We tried to address this and add a check of IS_ENABLED(CONFIG_PCI), but this still doesn't seem enough for sh. Ideally we should fix it globally, it's really a corner case, so let's paper over it with a simpler ifdef. Fixes: 1e73359a ("ALSA: hda/ca0132 - make pci_iounmap() call conditional") Reported-by:
-
- 05 Feb, 2019 2 commits
-
-
Charles Keepax authored
It is normal user behaviour to start, stop, then start a stream again without closing it. Currently this works for compressed playback streams but not capture ones. The states on a compressed capture stream go directly from OPEN to PREPARED, unlike a playback stream which moves to SETUP and waits for a write of data before moving to PREPARED. Currently however, when a stop is sent the state is set to SETUP for both types of streams. This leaves a capture stream in the situation where a new start can't be sent as that requires the state to be PREPARED and a new set_params can't be sent as that requires the state to be OPEN. The only option being to close the stream, and then reopen. Correct this issues by allowing snd_compr_drain_notify to set the state depending on the stream direction, as we already do in set_params. Fixes: 49bb6402 ("ALSA: compress_core: Add support for capture streams") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Udo Eberhardt authored
This patch adds the T+A VID to the generic check in order to enable native DSD support for T+A devices. This works with the new T+A USB DAC model SD3100HV and will also work with future devices which support the XMOS/Thesycon style DSD format. Signed-off-by:
Udo Eberhardt <udo.eberhardt@thesycon.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 02 Feb, 2019 2 commits
-
-
Guennadi Liakhovetski authored
rmmod/modprobe tests expose a kernel oops when accessing the dai driver pointer. This comes from the topology design which operates in multiple passes. Each object removal happens at a specific iteration, and the code checks for the iteration (order) number after the memory containing the order was freed. Fix this be clearing a reference to the dai driver and check its validity to avoid dereferences. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by:
-
Kuninori Morimoto authored
Renesas sound device has many IPs and many situations. If platform/board uses MIXer, situation will be more complex. To avoid duplicate DVC kctrl registration when MIXer was used, it had original flags. But it was issue when sound card was re-binded, because no one can't cleanup this flags then. To solve this issue, commit 9c698e84 ("ASoC: rsnd: tidyup registering method for rsnd_kctrl_new()") checks registered card->controls, because if card was re-binded, these were cleanuped automatically. This patch could solve re-binding issue. But, it start to avoid MIX kctrl. To solve these issues, we need below. To avoid card re-binding issue: check registered card->controls To avoid duplicate DVC registration: check registered rsnd_kctrl_cfg To allow multiple MIX registration: check registered rsnd_kctrl_cfg This patch do it. Fixes: 9c698e84 ("ASoC: rsnd: tidyup registering method for rsnd_kctrl_new()") Reported-by:
-
- 01 Feb, 2019 3 commits
-
-
Takashi Iwai authored
In the current code, the codec registration may happen both at the codec bind time and the end of the controller probe time. In a rare occasion, they race with each other, leading to Oops due to the still uninitialized card device. This patch introduces a simple flag to prevent the codec registration at the codec bind time as long as the controller probe is going on. The controller probe invokes snd_card_register() that does the whole registration task, and we don't need to register each piece beforehand. Cc: <stable@vger.kernel.org> Signed-off-by: -
Takashi Iwai authored
Replace the open-codes in many places with a new common helper for performing the same thing: referring to the primary headphone pin. This eventually fixes the potentially missing headphone pin on some weird devices, too. Cc: <stable@vger.kernel.org> Signed-off-by: -
Kailang Yang authored
When auto_mute = no or spec->suppress_auto_mute = 1, cfg->hp_pins will lose value. Add this patch to find hp_pins value. I add fixed for ALC282 ALC225 ALC256 ALC294 and alc_default_init() alc_default_shutup(). Signed-off-by:
-
- 31 Jan, 2019 1 commit
-
-
Jeremy Soller authored
On the System76 Darter Pro (darp5), there is a headset microphone input attached to 0x1a that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and the ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is similar to the MIC_NO_PRESENCE fixups for some Dell laptops, except we have a separate microphone jack that is already configured correctly. Signed-off-by:
-
- 29 Jan, 2019 1 commit
-
-
Kailang Yang authored
Fix hp_pin always no value. [More notes on the changes: The hp_pin value that is referred in alc294_hp_init() is always zero at the moment the function gets called, hence this is actually useless as in the current code. And, this kind of init sequence should be called from the codec init callback, instead of the parser function. So, the first fix in this patch to move the call call into its own init_hook. OTOH, this function is needed to be called only once after the boot, and it'd take too long for invoking at each resume (where the init callback gets called). So we add a new flag and invoke this only once as an additional fix. The one case is still not covered, though: S4 resume. But this change itself won't lead to any regression in that regard, so we leave S4 issue as is for now and fix it later. -- tiwai ] Fixes: bde1a745 ("ALSA: hda/realtek - Fixed headphone issue for ALC700") Signed-off-by:
-
- 25 Jan, 2019 3 commits
-
-
Takashi Iwai authored
When the trigger=off is passed for a PCM OSS stream, it sets the start_threshold of the given substream to the boundary size, so that it won't be automatically started. This can be problematic for a capture stream, unfortunately, as detected by syzkaller. The scenario is like the following: - In __snd_pcm_lib_xfer() that is invoked from snd_pcm_oss_read() loop, we have a check whether the stream was already started or the stream can be auto-started. - The function at this check returns 0 with trigger=off since we explicitly disable the auto-start. - The loop continues and repeats calling __snd_pcm_lib_xfer() tightly, which may lead to an RCU stall. This patch fixes the bug by simply allowing the wait for non-started stream in the case of OSS capture. For native usages, it's supposed to be done by the caller side (which is user-space), hence it returns zero like before. (In theory, __snd_pcm_lib_xfer() could wait even for the native API usage cases, too; but I'd like to stay in a safer side for not breaking the existing stuff for now.) Reported-by: syzbot+fbe0496f92a0ce7b786c@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: -
Olek Poplavsky authored
This patch adds quirk VID/PID IDs for the Opus #3 DAP (made by 'The Bit') in order to enable Native DSD support. [ NOTE: this could be handled in the generic way with fp->dvd_raw if we add 0x10cb to the vendor whitelist, but since 0x10cb shows a different vendor name (Erantech), put to the individual entry at this time -- tiwai ] Signed-off-by:
Olek Poplavsky <woodenbits@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Charles Keepax authored
For devices implemented as a MFD it is common to only have a single node in devicetree representing the whole device. As such when looking up components in soc_find_components we should match against both the devices of_node and the devices parent's of_node, as is already done in the rest of the ASoC core. This causes regressions for some DAI links at the moment as soc_find_component was recently added as a check in soc_init_dai_link. Fixes: 8780cf11 ("ASoC: soc-core: defer card probe until all component is added to list") Signed-off-by:
-
- 22 Jan, 2019 1 commit
-
-
Shuming Fan authored
AD/DA ASRC function control two ASRC clock sources separately. Whether AD/DA filter select which clock source, we enable AD/DA ASRC function for all cases. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Signed-off-by:
-
- 21 Jan, 2019 2 commits
-
-
Fabio Estevam authored
I prefer to use my personal email address for kernel related work. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Anthony Wong authored
Support speaker and mic mute LEDs on HP ProBook 470 G5. BugLink: https://bugs.launchpad.net/bugs/1811254Signed-off-by:
Anthony Wong <anthony.wong@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 18 Jan, 2019 2 commits
-
-
Russell King authored
hdmi-codec oopses the kernel when it is unbound from a successfully bound audio subsystem, and is then rebound: Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = ee3f0000 [0000001c] *pgd=3cc59831 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: ext2 snd_soc_spdif_tx vmeta dove_thermal snd_soc_kirkwood ofpart marvell_cesa m25p80 orion_wdt mtd spi_nor des_generic gpio_ir_recv snd_soc_kirkwood_spdif bmm_dmabuf auth_rpcgss nfsd autofs4 etnaviv thermal_sys hwmon gpu_sched tda9950 CPU: 0 PID: 1005 Comm: bash Not tainted 4.20.0+ #1762 Hardware name: Marvell Dove (Cubox) PC is at hdmi_dai_probe+0x68/0x80 LR is at find_held_lock+0x20/0x94 pc : [<c04c7de0>] lr : [<c0063bf4>] psr: 600f0013 sp : ee15bd28 ip : eebd8b1c fp : c093b488 r10: ee048000 r9 : eebdab18 r8 : ee048600 r7 : 00000001 r6 : 00000000 r5 : 00000000 r4 : ee82c100 r3 : 00000006 r2 : 00000001 r1 : c067e38c r0 : ee82c100 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none[ 297.318599] Control: 10c5387d Table: 2e3f0019 DAC: 00000051 Process bash (pid: 1005, stack limit = 0xee15a248) ... [<c04c7de0>] (hdmi_dai_probe) from [<c04b7060>] (soc_probe_dai.part.9+0x34/0x70) [<c04b7060>] (soc_probe_dai.part.9) from [<c04b81a8>] (snd_soc_instantiate_card+0x734/0xc9c) [<c04b81a8>] (snd_soc_instantiate_card) from [<c04b8b6c>] (snd_soc_add_component+0x29c/0x378) [<c04b8b6c>] (snd_soc_add_component) from [<c04b8c8c>] (snd_soc_register_component+0x44/0x54) [<c04b8c8c>] (snd_soc_register_component) from [<c04c64b4>] (devm_snd_soc_register_component+0x48/0x84) [<c04c64b4>] (devm_snd_soc_register_component) from [<c04c7be8>] (hdmi_codec_probe+0x150/0x260) [<c04c7be8>] (hdmi_codec_probe) from [<c0373124>] (platform_drv_probe+0x48/0x98) This happens because hdmi_dai_probe() attempts to access the HDMI codec private data, but this has not been assigned by hdmi_dai_probe() before it calls devm_snd_soc_register_component(). Move the call to dev_set_drvdata() before devm_snd_soc_register_component() to avoid this oops. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.0-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.0 Quite a big batch of fixes here. There's a couple of things going on, the main one is that we found some issues with not deferring probe when we should, causing us to skip some driver initialization. The fixes for this then in turn exposed some issues with how we were searching for components which had previously gone unnoticed due to the original issue. There's also been the normal driver specific stuff and there's been what looks like several batches of automated scanning for issues which have generated quite a large set of smaller fixes for potential crashes and missed error handling.
-
- 15 Jan, 2019 7 commits
-
-
Gustavo A. R. Silva authored
Check return value from call to devm_kzalloc() in order to prevent a potential NULL pointer dereference. Also, notice that it makes no sense to allocate any resources if res = platform_get_resource(pdev, IORESOURCE_MEM, 0); fails, so move the call to devm_kzalloc() below the mentioned code. Lastly, improve the use of sizeof in the call to devm_kzalloc() by changing it from sizeof(struct i2s_dev_data) to sizeof(*adata) This issue was detected with the help of Coccinelle. Fixes: ac289c7e ("ASoC: amd: add ACP3x PCM platform driver") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Silvio Cesare authored
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by:
Silvio Cesare <silvio.cesare@gmail.com> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Gustavo A. R. Silva authored
There is a potential NULL pointer dereference in case devm_kzalloc() fails and returns NULL. Fix this by adding a NULL check on rt5514_dsp. This issue was detected with the help of Coccinelle. Fixes: 6eebf35b ("ASoC: rt5514: add rt5514 SPI driver") Cc: stable@vger.kernel.org Signed-off-by:
-
Silvio Cesare authored
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by:
-
Shuming Fan authored
Fix typo which causes headphone no sound while using BCLK as PLL source. Signed-off-by:
-
Matthias Reichl authored
cpu and platform are optional components in DAI links. For example codec-codec links usually have no platform set. Call snd_soc_find_component only if the name or of_node of a cpu or platform is set. Otherwise it will return NULL and soc_init_dai_link bails out immediately with -EPROBE_DEFER, meaning registering a card with NULL cpu or platform in DAI links can never succeed. Fixes: 8780cf11 ("ASoC: soc-core: defer card probe until all component is added to list") Signed-off-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
-
Mark Brown authored
There are some use cases where you're checking for a lot of things on a card and it makes sense that you might end up trying to call snd_soc_find_component() without either a name or an of_node. Currently in that case we try to dereference the name and crash but it's more useful to allow the caller to just treat that as a case where we don't find anything, that error handling will already exist. Inspired by a patch from Ajit Pandey fixing some callers. Fixes: 8780cf11 ("ASoC: soc-core: defer card probe until all component is added to list") Reported-by:
-
- 14 Jan, 2019 1 commit
-
-
Curtis Malainey authored
snd_soc_init_platform initializes pointers to snd_soc_dai_link which is statically allocated and it does this by devm_kzalloc. In the event of an EPROBE_DEFER the memory will be freed and the pointers are left dangling. snd_soc_init_platform sees the dangling pointers and assumes they are pointing to initialized memory and does not reallocate them on the second probe attempt which results in a use after free bug since devm has freed the memory from the first probe attempt. Since the intention for snd_soc_dai_link->platform is that it can be set statically by the machine driver we need to respect the pointer in the event we did not set it but still catch dangling pointers. The solution is to add a flag to track whether the pointer was dynamically allocated or not. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
