Remove debug printk I accidently left in as part of commit:

commit 6146b1a4
Author: Jay Vosburgh <fubar@us.ibm.com>
Date:   Tue Nov 4 17:51:15 2008 -0800

    bonding: Fix ALB mode to balance traffic on VLANs

	Reported by Duncan Gibb <duncan.gibb@siriusit.co.uk>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000/e1000e compile report a possible unused variable, fix
that for now.  Shortly after this a small refactor and bug
fix will follow in the same code.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The BUG_ON(skge->tx_ring.to_use != skge->tx_ring.to_clean) in skge_up()
was sometimes observed when setting MTU.

skge_down() disables the TX queue, but then reenables it by mistake via
skge_tx_clean().
Fix it by moving the waking of the queue from skge_tx_clean() to the
other caller. And to make sure start_xmit is not in progress on another
CPU, skge_down() should call netif_tx_disable().

The bug was reported to me by Jiri Jilek whose Debian system sometimes
failed to boot. He tested the patch and the bug did not happen anymore.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since everybody has been focusing on baremetal GRO performance
no one noticed when I added a bug that zapped gso_size for all
GRO packets.  This only gets picked up when you forward the skb
out of an interface.

Thanks to Mark Wagner for noticing this bug when testing kvm.
Reported-by: Mark Wagner <mwagner@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

After switch (rthdr->type) {...},the check below is completely useless.Because:
if the type is 2,then hdrlen must be 2 and segments_left must be 1,clearly the
check is redundant;if the type is not 2,then goto sticky_done,the check is useless
too.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When I made the tun driver use non-linear packets as the preferred
option, it broke non-GSO users because they would end up allocating
a completely non-linear packet, which triggers a crash when we call
eth_type_trans.

This patch reverts non-GSO users to using linear packets and adds
a check to ensure that GSO users can't cause crashes in the same
way.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

A long-standing feature in tcp_init_metrics() is such that
any of its goto reset prevents call to tcp_init_cwnd().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

When vlan acceleration is used on receive, the vlan tag is maintained
outside of the skb data. The existing vlan tag match only works on TX
path because it uses vlan_get_tag which tests for VLAN_HW_TX_ACCEL.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hi:

gro: Normalise skb before bypassing GRO on netpoll VLAN path

When we detect netpoll RX on the GRO VLAN path we bail out and
call the normal VLAN receive handler.  However, the packet needs
to be normalised by calling eth_type_trans since that's what the
normal path expects (normally the GRO path does the fixup).

This patch adds the necessary call to vlan_gro_frags.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Thanks,
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the default value of pause auto-negotiation supported
by PCS.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add did_interrupt() function to check if a PHY port
really caused an interrupt. This is needed in the case
of shared PHY interrupt pin configuration to stop
interrupt event processing for PHY ports which didn't
cause an interrupt.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marvell 88E1121R Dual PHY device can be hardware-configured
to use shared interrupt pin for both PHY ports. For such
PHY configurations using shared PHY interrupt phy_interrupt()
handler will also schedule a work for PHY port which didn't
cause an interrupt.

This patch adds a possibility for PHY drivers to provide
did_interrupt() function which reports if the PHY (or a PHY
port in a multi-PHY device) generated an interrupt. This
function is called in phy_change() as phy_change() shouldn't
proceed if it is invoked for a PHY which didn't cause an
interrupt. So check for interrupt originator in phy_change()
to allow early-out.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the Marvell M88E1121R Dual GigE PHY
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	MAINTAINERS

We noticed on parisc that our broadcoms all swapped MAC addresses going
from 2.6.29 to 2.6.30-rc1:

Apr 11 07:48:24 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:30:6e:4b:15:59
Apr 13 07:34:34 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:00:59:15:4b:6e

The problem patch is:

commit 6d348f2c
Author: Matt Carlson <mcarlson@broadcom.com>
Date:   Wed Feb 25 14:25:52 2009 +0000

    tg3: Eliminate tg3_nvram_read_swab()

With the root cause being the use of memcpy to set the mac address:

   memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
   memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));

This might work on little endian machines, but it can't on big endian
ones.  You have to use the original setting mechanism to be correct on
all architectures.

The attached patch fixes parisc.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  docbook: make cleandocs
  kbuild: fix spurious initramfs rebuild
  Documentation: explain the difference between __bitwise and __bitwise__
  kbuild: make it possible for the linker to discard local symbols from vmlinux
  kbuild: remove pointless strdup() on arguments passed to new_module() in modpost
  kbuild: fix a few typos in top-level Makefile
  kbuild: introduce destination-y for exported headers
  kbuild: use git svn instead of git-svn in setlocalversion
  kconfig: fix update-po-config to accect backslash in input
  kbuild: fix option processing for -I in headerdep

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata: fix obviously wrong comment
  ahci: force CAP_NCQ for earlier NV MCPs
  [libata] sata_via: kill uninit'd var warning

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits)
  Input: i8042 - add HP DV9700 to the noloop list
  Input: arrange drivers/input/misc/Makefile in alphabetical order
  Input: add AD7879 Touchscreen driver
  Input: add AD7877 touchscreen driver
  Input: bf54x-keys - fix typo in warning
  Input: add driver for S1 button of rb532
  Input: generic driver for rotary encoders on GPIOs
  Input: hilkbd - fix crash when removing hilkbd module
  Input: atkbd - add quirk for Fujitsu Siemens Amilo PA 1510
  Input: atkbd - consolidate force release quirk setup
  Input: add accelerated touchscreen support for Marvell Zylonite
  Input: ucb1400_ts, mainstone-wm97xx - add BTN_TOUCH events
  Input: wm97xx - use disable_irq_nosync() for Mainstone
  Input: wm97xx - add BTN_TOUCH event to wm97xx to use it with Android
  Input: fix polling of /proc/bus/input/devices
  Input: psmouse - add newline to OLPC HGPK touchpad debugging
  Input: ati_remote2 - check module params
  Input: ati_remote2 - add per device attrs
  Input: ati_remote2 - complete suspend support
  Input: stop autorepeat timer on key release
  ...

There is a race between resume from hibernation and the asynchronous
scanning of SCSI devices and to prevent it from happening we need to
call scsi_complete_async_scans() during resume from hibernation.

In addition, if the resume from hibernation is userland-driven, it's
better to wait for all device probes in the kernel to complete before
attempting to open the resume device.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Avoid panic() for DRHD at address zero.
  Intel-IOMMU Alignment Issue in dma_pte_clear_range()

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: add linux kernel support for YMM state
  x86: fix wrong section of pat_disable & make it static
  x86: Fix section mismatches in mpparse
  x86: fix set_fixmap to use phys_addr_t
  x86: Document get_user_pages_fast()
  x86, intr-remap: fix eoi for interrupt remapping without x2apic

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing/filters: return proper error code when writing filter file
  tracing/filters: allow user input integer to be oct or hex
  tracing/filters: fix NULL pointer dereference
  tracing/filters: NIL-terminate user input filter
  ftrace: Output REC->var instead of __entry->var for trace format
  Make __stringify support variable argument macros too
  tracing: fix document references
  tracing: fix splice return too large
  tracing: update file->f_pos when splice(2) it
  tracing: allocate page when needed
  tracing: disable seeking for trace_pipe_raw

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: continue lock debugging despite some taints
  lockdep: warn about lockdep disabling after kernel taint

Atttempting to rid us of the problematic work_on_cpu().  Just use
smp_call_fuction_single() here.

This repairs a 10% sysbench(oltp)+mysql regression which Mike reported,
due to

  commit 6b44003e
  Author: Andrew Morton <akpm@linux-foundation.org>
  Date:   Thu Apr 9 09:50:37 2009 -0600

      work_on_cpu(): rewrite it to create a kernel thread on demand

It seems that the kernel calls these acpi-cpufreq functions at a quite
high frequency.

Valdis Kletnieks also reports that this causes 70-90 forks per second on
his hardware.

Cc: Valdis.Kletnieks@vt.edu
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
[ Made it use smp_call_function_many() instead of looping over cpu's
  with smp_call_function_single()    - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Let new-style drivers implement attach_adapter
  i2c: Fix sparse warnings for I2C_BOARD_INFO()
  i2c-voodoo3: Deprecate in favor of tdfxfb
  i2c-algo-pca: Fix use of uninitialized variable in debug message

When POSIX capabilities were introduced during the 2.1 Linux
cycle, the fs mask, which represents the capabilities which having
fsuid==0 is supposed to grant, did not include CAP_MKNOD and
CAP_LINUX_IMMUTABLE.  However, before capabilities the privilege
to call these did in fact depend upon fsuid==0.

This patch introduces those capabilities into the fsmask,
restoring the old behavior.

See the thread starting at http://lkml.org/lkml/2009/3/11/157 for
reference.

Note that if this fix is deemed valid, then earlier kernel versions (2.4
and 2.2) ought to be fixed too.

Changelog:
	[Mar 23] Actually delete old CAP_FS_SET definition...
	[Mar 20] Updated against J. Bruce Fields's patch
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: stable@kernel.org
Cc: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'gm_20090410' of git://repo.or.cz/linux-2.6/trivial-mods:
  MAINTAINERS - Update MN10300 patterns
  MAINTAINERS - Update frv arch patterns
  scripts/get_maintainer.pl - Allow multiple files on command line
  MAINTAINERS - Update Freescale sound patterns
  MAINTAINERS - Add additional patterns
  MAINTAINERS - Add missing "/" to some pattern directories
  MAINTAINERS - Update DRIVER CORE patterns
  MAINTAINERS - Update M68K patterns
  MAINTAINERS - Coalesce sections "DVB" and "Video for Linux"
  MAINTAINERS - Remove cyblafb frame buffer no longer in tree
  MAINTAINERS - Remove x86/Voyager no longer in tree
  MAINTAINERS - Update FPU Emulator contact address and web page
  MAINTAINERS - i2c_tiny_usb T: should be W:
  MAINTAINERS - Add Linus Torvalds' git
  MAINTAINERS - standardize "T:       git urls"
  MAINTAINERS - Remove HP Fibre Channel HBA no longer in tree
  MAINTAINERS - Standardize style
  MAINTAINERS - Add file patterns
  Add scripts/get_maintainer.pl
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Andrew Morton <akpm@linux-foundation.org>

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  percpu: unbreak alpha percpu
  mutex: have non-spinning mutexes on s390 by default