Commit 4fc9b87b ("net: fs_enet: Implement NETIF_F_SG feature")
brings a trouble to Freescale MPC512x: a kernel oops happens
during sending non-linear sk_buff with .data not aligned by 4.

Log quotation:

Unable to handle kernel paging request for data at address 0xe467c000
Faulting instruction address: 0xc000cd44
Oops: Kernel access of bad area, sig: 11 [#1]
MPC512x generic
Modules linked in:
CPU: 0 PID: 984 Comm: kworker/0:1H Not tainted 4.1.0-rc8-00024-gbb16140a #2
Workqueue: rpciod rpc_async_schedule
task: cf364a50 ti: cf362000 task.ti: cf362000
NIP: c000cd44 LR: c000c720 CTR: 00000206
REGS: cf363ac0 TRAP: 0300   Not tainted  (4.1.0-rc8-00024-gbb16140a)
MSR: 00009032 <EE,ME,IR,DR,RI>  CR: 42004082  XER: 00000000
DAR: e467c000 DSISR: 20000000
GPR00: c0279e24 cf363b70 cf364a50 e467c000 00000206 0000001f 00000001 00000001
GPR08: 00000000 e467c000 e46800be 000139a6 82002082 00000000 c002e46c cf3c3680
GPR16: c044cb30 c04b0000 cf363c48 00000000 00000001 fde0315c 00000000 0000000b
GPR24: 0000002c 000040be cf339aa0 0000000b 00000001 cf873210 00282f85 00000000
NIP [c000cd44] clean_dcache_range+0x1c/0x30
LR [c000c720] dma_direct_map_page+0x40/0x94
Call Trace:
[cf363b70] [cf339b60] 0xcf339b60 (unreliable)
[cf363b90] [c0279e24] fs_enet_start_xmit+0x1c8/0x42c
[cf363bd0] [c02ff710] dev_hard_start_xmit+0x2dc/0x3d4
[cf363c40] [c0319c60] sch_direct_xmit+0xcc/0x1cc
[cf363c70] [c02ff9c0] __dev_queue_xmit+0x1b8/0x47c
[cf363ca0] [c032a3e8] ip_finish_output+0x1fc/0x9a8
[cf363ce0] [c032c31c] ip_send_skb+0x1c/0xa4
[cf363cf0] [c035112c] udp_send_skb+0xe4/0x2e8
[cf363d10] [c0351368] udp_push_pending_frames+0x38/0x84
[cf363d20] [c03537b8] udp_sendpage+0x134/0x174
[cf363d70] [c0384fd4] xs_sendpages+0x21c/0x250
[cf363db0] [c03852bc] xs_udp_send_request+0x50/0xf8
[cf363de0] [c0382f08] xprt_transmit+0x64/0x280
[cf363e20] [c038017c] call_transmit+0x168/0x234
[cf363e40] [c0387918] __rpc_execute+0x88/0x2b0
[cf363e80] [c00296f8] process_one_work+0x124/0x2fc
[cf363ea0] [c0029a00] worker_thread+0x130/0x480
[cf363ef0] [c002e528] kthread+0xbc/0xd0
[cf363f40] [c000e4a8] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
7c70faa6 60630800 7c70fba6 4c00012c 4e800020 38a0001f 7c632878 7c832050
7c842a14 5484d97f 4d820020 7c8903a6 <7c00186c> 38630020 4200fff8 7c0004ac
---[ end trace c846c1eceb513c85 ]---

The reason:

MPC5121 FEC requires 4-byte alignment for TX data buffer and calls
tx_skb_align_workaround() for copying sk_buff with not aligned .data to a new
sk_buff with aligned one. But tx_skb_align_workaround() uses
skb_copy_from_linear_data() which doesn't work for non-linear sk_buff:
a new sk_buff has non-zero nr_frags and zero .data_len.

So improve the condition of calling tx_skb_align_workaround() and use
skb_linearize() in it.
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit edafc132 ("xen-netback: making the bandwidth limiter runtime settable")
introduced the capability to change the bandwidth rate limit at runtime.
But it also introduced a possible crashing bug.

If netback receives two XenbusStateConnected without getting the
hotplug-status watch firing in between, then it will try to register the
watches for the rate limiter again.  But this triggers a BUG() in the watch
registration code.

The fix modifies connect() to remove the possibly existing packet-rate
watches before trying to install those watches.  This behaviour is in line
with how connect() deals with the hotplug-status watch.
Signed-off-by: Imre Palik <imrep@amazon.de>
Cc: Matt Wilson <msw@amazon.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a port goes through a link down/up the multicast router configuration
is not restored.
Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: 0909e117 ("bridge: Add multicast_router sysfs entries")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

A ROSE socket doesn't necessarily always have a neighbour pointer so check
if the neighbour pointer is valid before dereferencing it.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Bernard Pidoux <f6bvp@free.fr>
Cc: stable@vger.kernel.org #2.6.11+
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_fastopen_reset_cipher really cannot be called from interrupt
context. It allocates the tcp_fastopen_context with GFP_KERNEL and
calls crypto_alloc_cipher, which allocates all kind of stuff with
GFP_KERNEL.

Thus, we might sleep when the key-generation is triggered by an
incoming TFO cookie-request which would then happen in interrupt-
context, as shown by enabling CONFIG_DEBUG_ATOMIC_SLEEP:

[   36.001813] BUG: sleeping function called from invalid context at mm/slub.c:1266
[   36.003624] in_atomic(): 1, irqs_disabled(): 0, pid: 1016, name: packetdrill
[   36.004859] CPU: 1 PID: 1016 Comm: packetdrill Not tainted 4.1.0-rc7 #14
[   36.006085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[   36.008250]  00000000000004f2 ffff88007f8838a8 ffffffff8171d53a ffff880075a084a8
[   36.009630]  ffff880075a08000 ffff88007f8838c8 ffffffff810967d3 ffff88007f883928
[   36.011076]  0000000000000000 ffff88007f8838f8 ffffffff81096892 ffff88007f89be00
[   36.012494] Call Trace:
[   36.012953]  <IRQ>  [<ffffffff8171d53a>] dump_stack+0x4f/0x6d
[   36.014085]  [<ffffffff810967d3>] ___might_sleep+0x103/0x170
[   36.015117]  [<ffffffff81096892>] __might_sleep+0x52/0x90
[   36.016117]  [<ffffffff8118e887>] kmem_cache_alloc_trace+0x47/0x190
[   36.017266]  [<ffffffff81680d82>] ? tcp_fastopen_reset_cipher+0x42/0x130
[   36.018485]  [<ffffffff81680d82>] tcp_fastopen_reset_cipher+0x42/0x130
[   36.019679]  [<ffffffff81680f01>] tcp_fastopen_init_key_once+0x61/0x70
[   36.020884]  [<ffffffff81680f2c>] __tcp_fastopen_cookie_gen+0x1c/0x60
[   36.022058]  [<ffffffff816814ff>] tcp_try_fastopen+0x58f/0x730
[   36.023118]  [<ffffffff81671788>] tcp_conn_request+0x3e8/0x7b0
[   36.024185]  [<ffffffff810e3872>] ? __module_text_address+0x12/0x60
[   36.025327]  [<ffffffff8167b2e1>] tcp_v4_conn_request+0x51/0x60
[   36.026410]  [<ffffffff816727e0>] tcp_rcv_state_process+0x190/0xda0
[   36.027556]  [<ffffffff81661f97>] ? __inet_lookup_established+0x47/0x170
[   36.028784]  [<ffffffff8167c2ad>] tcp_v4_do_rcv+0x16d/0x3d0
[   36.029832]  [<ffffffff812e6806>] ? security_sock_rcv_skb+0x16/0x20
[   36.030936]  [<ffffffff8167cc8a>] tcp_v4_rcv+0x77a/0x7b0
[   36.031875]  [<ffffffff816af8c3>] ? iptable_filter_hook+0x33/0x70
[   36.032953]  [<ffffffff81657d22>] ip_local_deliver_finish+0x92/0x1f0
[   36.034065]  [<ffffffff81657f1a>] ip_local_deliver+0x9a/0xb0
[   36.035069]  [<ffffffff81657c90>] ? ip_rcv+0x3d0/0x3d0
[   36.035963]  [<ffffffff81657569>] ip_rcv_finish+0x119/0x330
[   36.036950]  [<ffffffff81657ba7>] ip_rcv+0x2e7/0x3d0
[   36.037847]  [<ffffffff81610652>] __netif_receive_skb_core+0x552/0x930
[   36.038994]  [<ffffffff81610a57>] __netif_receive_skb+0x27/0x70
[   36.040033]  [<ffffffff81610b72>] process_backlog+0xd2/0x1f0
[   36.041025]  [<ffffffff81611482>] net_rx_action+0x122/0x310
[   36.042007]  [<ffffffff81076743>] __do_softirq+0x103/0x2f0
[   36.042978]  [<ffffffff81723e3c>] do_softirq_own_stack+0x1c/0x30

This patch moves the call to tcp_fastopen_init_key_once to the places
where a listener socket creates its TFO-state, which always happens in
user-context (either from the setsockopt, or implicitly during the
listen()-call)

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Fixes: 222e83d2 ("tcp: switch tcp_fastopen key generation to net_get_random_once")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 898b2970 ("mvneta: implement SGMII-based in-band link state
signaling")
changed mvneta_adjust_link() so that it does not clear the auto-negotiation
bits in MVNETA_GMAC_AUTONEG_CONFIG register. This was necessary for
auto-negotiation mode to work.
Unfortunately I haven't checked if these bits are ever initialized.
It appears they are not.
This patch adds the missing initialization of the auto-negotiation bits
in the MVNETA_GMAC_AUTONEG_CONFIG register.
It fixes the following regression:
https://www.mail-archive.com/netdev@vger.kernel.org/msg67928.html

Since the patch was tested to fix a regression, it should be applied to
stable tree.
Tested-by: Arnaud Ebalard <arno@natisbad.org>

CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

PACKET_FANOUT_LB computes f->rr_cur such that it is modulo
f->num_members. It returns the old value unconditionally, but
f->num_members may have changed since the last store. Ensure
that the return value is always < num.

When modifying the logic, simplify it further by replacing the loop
with an unconditional atomic increment.

Fixes: dc99f600 ("packet: Add fanout support.")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unfortunately, Michal's change to fix AP_VLAN crypto tailroom
caused a locking issue that was reported by lockdep, but only
in a few cases - the issue was a classic ABBA deadlock caused
by taking the mtx after the key_mtx, where normally they're
taken the other way around.

As the key mutex protects the field in question (I'm adding a
few annotations to make that clear) only the iteration needs
to be protected, but we can also iterate the interface list
with just RCU protection while holding the key mutex.

Fixes: f9dca80b ("mac80211: fix AP_VLAN crypto tailroom calculation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix an allmodconfig compilation failer on microblaze due to big endian
architectures being apparently unsupported by the NetJet code:
  drivers/isdn/hisax/nj_s.c: In function 'setup_netjet_s':
  drivers/isdn/hisax/nj_s.c:265:2:
      error: #error "not running on big endian machines now"

Modify the relevant Kconfig such that the NetJet code is not built on
microblaze anymore.

Note that endianess on microblaze is not determined through Kconfig,
but by means of a compiler provided CPP macro, namely __MICROBLAZEEL__.
However, gcc defaults to big endianess on that platform.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Acked-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lockless lookups can return entry that is unlinked.
Sometimes they get reference before last neigh_cleanup_and_release,
sometimes they do not need reference. Later, any
modification attempts may result in the following problems:

1. entry is not destroyed immediately because neigh_update
can start the timer for dead entry, eg. on change to NUD_REACHABLE
state. As result, entry lives for some time but is invisible
and out of control.

2. __neigh_event_send can run in parallel with neigh_destroy
while refcnt=0 but if timer is started and expired refcnt can
reach 0 for second time leading to second neigh_destroy and
possible crash.

Thanks to Eric Dumazet and Ying Xue for their work and analyze
on the __neigh_event_send change.

Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour")
Fixes: a263b309 ("ipv4: Make neigh lookups directly in output packet path.")
Fixes: 6fd6ce20 ("ipv6: Do not depend on rt->n in ip6_finish_output2().")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to tell compiler it must not read f->num_members multiple
times. Otherwise testing if num is not zero is flaky, and we could
attempt an invalid divide by 0 in fanout_demux_cpu()

Note bug was present in packet_rcv_fanout_hash() and
packet_rcv_fanout_lb() but final 3.1 had a simple location
after commit 95ec3eb4 ("packet: Add 'cpu' fanout policy.")

Fixes: dc99f600 ("packet: Add fanout support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the ->set() spinlocks were removed br_stp_set_bridge_priority
was left running without any protection when used via sysfs. It can
race with port add/del and could result in use-after-free cases and
corrupted lists. Tested by running port add/del in a loop with stp
enabled while setting priority in a loop, crashes are easily
reproducible.
The spinlocks around sysfs ->set() were removed in commit:
14f98f25 ("bridge: range check STP parameters")
There's also a race condition in the netlink priority support that is
fixed by this change, but it was introduced recently and the fixes tag
covers it, just in case it's needed the commit is:
af615762 ("bridge: add ageing_time, stp_state, priority over netlink")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Fixes: 14f98f25 ("bridge: range check STP parameters")
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to firmware bug, under VPI configuration when port1 = IB and
port2 = Eth, Granular QoS per VF isn't working properly. More over,
the whole QP0/QP1 Para-Virtualization in the mlx4 IB driver is
broken on that config.

Hence, we must disable Granular QoS per VF under that configuration
till a fix is introduced. Once that happens, a new device capability
will be used to mark the feature support on that specific configuration.
Reported-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

->auto_asconf_splist is per namespace and mangled by functions like
sctp_setsockopt_auto_asconf() which doesn't guarantee any serialization.

Also, the call to inet_sk_copy_descendant() was backuping
->auto_asconf_list through the copy but was not honoring
->do_auto_asconf, which could lead to list corruption if it was
different between both sockets.

This commit thus fixes the list handling by using ->addr_wq_lock
spinlock to protect the list. A special handling is done upon socket
creation and destruction for that. Error handlig on sctp_init_sock()
will never return an error after having initialized asconf, so
sctp_destroy_sock() can be called without addrq_wq_lock. The lock now
will be take on sctp_close_sock(), before locking the socket, so we
don't do it in inverse order compared to sctp_addr_wq_timeout_handler().

Instead of taking the lock on sctp_sock_migrate() for copying and
restoring the list values, it's preferred to avoid rewritting it by
implementing sctp_copy_descendant().

Issue was found with a test application that kept flipping sysctl
default_auto_asconf on and off, but one could trigger it by issuing
simultaneous setsockopt() calls on multiple sockets or by
creating/destroying sockets fast enough. This is only triggerable
locally.

Fixes: 9f7d653b ("sctp: Add Auto-ASCONF support (core).")
Reported-by: Ji Jianwen <jiji@redhat.com>
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix uninitialized struct station_info in cfg80211_wireless_stats(),
    from Johannes Berg.

 2) Revert commit attempt to fix ipv6 protocol resubmission, it adds
    regressions.

 3) Endless loops can be created in bridge port lists, fix from Nikolay
    Aleksandrov.

 4) Don't WARN_ON() if sk->sk_forward_alloc is non-zero in
    sk_clear_memalloc, it is a legal situation during swap deactivation.
    Fix from Mel Gorman.

 5) Fix order of disabling interrupts and unlocking NAPI in enic driver
    to avoid a race.  From Govindarajulu Varadarajan.

 6) High and low register writes are swapped when programming the start
    of periodic output in igb driver.  From Richard Cochran.

 7) Fix device rename handling in mpls stack, from Robert Shearman.

 8) Do not trigger compaction synchronously when optimistically trying
    to allocate an order 3 page in alloc_skb_with_frags() and
    skb_page_frag_refill().  From Shaohua Li.

 9) Authentication with COOKIE_ECHO is not handled properly in SCTP, fix
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  Doc: networking: Fix URL for wiki.wireshark.org in udplite.txt
  sctp: allow authenticating DATA chunks that are bundled with COOKIE_ECHO
  net: don't wait for order-3 page allocation
  mpls: handle device renames for per-device sysctls
  net: igb: fix the start time for periodic output signals
  enic: fix memory leak in rq_clean
  enic: check return value for stat dump
  enic: unlock napi busy poll before unmasking intr
  net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap
  bridge: fix multicast router rlist endless loop
  tipc: disconnect socket directly after probe failure
  Revert "ipv6: Fix protocol resubmission"
  cfg80211: wext: clear sinfo struct before calling driver

This patch fix URL (http to https) for wiki.wireshark.org.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we can ask to authenticate DATA chunks and we can send DATA
chunks on the same packet as COOKIE_ECHO, but if you try to combine
both, the DATA chunk will be sent unauthenticated and peer won't accept
it, leading to a communication failure.

This happens because even though the data was queued after it was
requested to authenticate DATA chunks, it was also queued before we
could know that remote peer can handle authenticating, so
sctp_auth_send_cid() returns false.

The fix is whenever we set up an active key, re-check send queue for
chunks that now should be authenticated. As a result, such packet will
now contain COOKIE_ECHO + AUTH + DATA chunks, in that order.
Reported-by: Liu Wei <weliu@redhat.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block layer fixes from Jens Axboe:
 "Remember about a week ago when I sent the last pull request for 4.1?
  Well, I lied.  Now, I don't want to shift the blame, but Dan, Ming,
  and Richard made a liar out of me.

  Here are three small patches that should go into 4.1.  More
  specifically, this pull request contains:

   - A Kconfig dependency for the pmem block driver, so it can't be
     selected if HAS_IOMEM isn't availble.  From Richard Weinberger.

   - A fix for genhd, making the ext_devt_lock softirq safe.  This makes
     lockdep happier, since we also end up grabbing this lock on release
     off the softirq path.  From Dan Williams.

   - A blk-mq software queue release fix from Ming Lei.

  Last two are headed to stable, first fixes an issue introduced in this
  cycle"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: pmem: Add dependency on HAS_IOMEM
  block: fix ext_dev_lock lockdep report
  blk-mq: free hctx->ctxs in queue's release handler

Pull three more md fixes from Neil Brown:
 "Hasn't been a good cycle for md has it :-(

  The main issue fixed here is a rare race which can result in two
  reshape threads running at once, which doesn't end well.

  Also a minor issue with a write to a sysfs file returning the wrong
  value.  Backports to 4.0-stable are indicated"

* tag 'md/4.1-rc7-fixes' of git://neil.brown.name/md:
  md: make sure MD_RECOVERY_DONE is clear before starting recovery/resync
  md: Close race when setting 'action' to 'idle'.
  md: don't return 0 from array_state_store

Pull VT-d hardware workarounds from David Woodhouse:
 "This contains a workaround for hardware issues which I *thought* were
  never going to be seen on production hardware.  I'm glad I checked
  that before the 4.1 release...

  Firstly, PASID support is so broken on existing chips that we're just
  going to declare the old capability bit 28 as 'reserved' and change
  the VT-d spec to move PASID support to another bit.  So any existing
  hardware doesn't support SVM; it only sets that (now) meaningless bit
  28.

  That patch *wasn't* imperative for 4.1 because we don't have PASID
  support yet.  But *even* the extended context tables are broken — if
  you just enable the wider tables and use none of the new bits in them,
  which is precisely what 4.1 does, you find that translations don't
  work.  It's this problem which I thought was caught in time to be
  fixed before production, but wasn't.

  To avoid triggering this issue, we now *only* enable the extended
  context tables on hardware which also advertises "we have PASID
  support and we actually tested it this time" with the new PASID
  feature bit.

  In addition, I've added an 'intel_iommu=ecs_off' command line
  parameter to allow us to disable it manually if we need to"

* git://git.infradead.org/intel-iommu:
  iommu/vt-d: Only enable extended context tables if PASID is supported
  iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register

Although the extended tables are theoretically a completely orthogonal
feature to PASID and anything else that *uses* the newly-available bits,
some of the early hardware has problems even when all we do is enable
them and use only the same bits that were in the old context tables.

For now, there's no motivation to support extended tables unless we're
going to use PASID support to do SVM. So just don't use them unless
PASID support is advertised too. Also add a command-line bailout just in
case later chips also have issues.

The equivalent problem for PASID support has already been fixed with the
upcoming VT-d spec update and commit bd00c606 ("iommu/vt-d: Change
PASID support to bit 40 of Extended Capability Register"), because the
problematic platforms use the old definition of the PASID-capable bit,
which is now marked as reserved and meaningless.

So with this change, we'll magically start using ECS again only when we
see the new hardware advertising "hey, we have PASID support and we
actually tested it this time" on bit 40.

The VT-d hardware architect has promised that we are not going to have
any reason to support ECS *without* PASID any time soon, and he'll make
sure he checks with us before changing that.

In the future, if hypothetical new features also use new bits in the
context tables and can be seen on implementations *without* PASID support,
we might need to add their feature bits to the ecs_enabled() macro.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

MD_RECOVERY_DONE is normally cleared by md_check_recovery after a
resync etc finished.  However it is possible for raid5_start_reshape
to race and start a reshape before MD_RECOVERY_DONE is cleared.  This
can lean to multiple reshapes running at the same time, which isn't
good.

To make sure it is cleared before starting a reshape, and also clear
it when reaping a thread, just to be safe.
Signed-off-by: NeilBrown  <neilb@suse.de>

Checking ->sync_thread without holding the mddev_lock()
isn't really safe, even after flushing the workqueue which
ensures md_start_sync() has been run.

While this code is waiting for the lock, md_check_recovery could reap
the thread itself, and then start another thread (e.g. recovery might
finish, then reshape starts).  When this thread gets the lock
md_start_sync() hasn't run so it doesn't get reaped, but
MD_RECOVERY_RUNNING gets cleared.  This allows two threads to start
which leads to confusion.

So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do
the flush and the test and the reap all under the mddev_lock to
avoid any race with md_check_recovery.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Cc: stable@vger.kernel.org (v4.0+)

Returning zero from a 'store' function is bad.
The return value should be either len length of the string
or an error.

So use 'len' if 'err' is zero.

Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel (v4.0+)

Pull drm fixes from Dave Airlie:
 "i915 and radeon fixes:

  i915:
      fix for connector oops regression
      DDC probing fix

  radeon:
      two radeon reverts, along with a freeze workaround and a fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
  Revert "drm/radeon: adjust pll when audio is not enabled"
  Revert "drm/radeon: don't share plls if monitors differ in audio support"
  drm/radeon: fix freeze for laptop with Turks/Thames GPU.
  drm/i915: Fix DDC probe for passive adapters
  drm/i915: Properly initialize SDVO analog connectors

We saw excessive direct memory compaction triggered by skb_page_frag_refill.
This causes performance issues and add latency. Commit 5640f768
introduces the order-3 allocation. According to the changelog, the order-3
allocation isn't a must-have but to improve performance. But direct memory
compaction has high overhead. The benefit of order-3 allocation can't
compensate the overhead of direct memory compaction.

This patch makes the order-3 page allocation atomic. If there is no memory
pressure and memory isn't fragmented, the alloction will still success, so we
don't sacrifice the order-3 benefit here. If the atomic allocation fails,
direct memory compaction will not be triggered, skb_page_frag_refill will
fallback to order-0 immediately, hence the direct memory compaction overhead is
avoided. In the allocation failure case, kswapd is waken up and doing
compaction, so chances are allocation could success next time.

alloc_skb_with_frags is the same.

The mellanox driver does similar thing, if this is accepted, we must fix
the driver too.

V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric
V2: make the changelog clearer

Cc: Eric Dumazet <edumazet@google.com>
Cc: Chris Mason <clm@fb.com>
Cc: Debabrata Banerjee <dbavatar@gmail.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix for the regression Linus called out, and another for probing
dongles.

* tag 'drm-intel-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Fix DDC probe for passive adapters
  drm/i915: Properly initialize SDVO analog connectors

Two regression reverts, and two fixes, one for a dpm boot freeze.

* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
  Revert "drm/radeon: adjust pll when audio is not enabled"
  Revert "drm/radeon: don't share plls if monitors differ in audio support"
  drm/radeon: fix freeze for laptop with Turks/Thames GPU.

If a device is renamed and the original name is subsequently reused
for a new device, the following warning is generated:

sysctl duplicate entry: /net/mpls/conf/veth0//input
CPU: 3 PID: 1379 Comm: ip Not tainted 4.1.0-rc4+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
 0000000000000000 0000000000000000 ffffffff81566aaf 0000000000000000
 ffffffff81236279 ffff88002f7d7f00 0000000000000000 ffff88000db336d8
 ffff88000db33698 0000000000000005 ffff88002e046000 ffff8800168c9280
Call Trace:
 [<ffffffff81566aaf>] ? dump_stack+0x40/0x50
 [<ffffffff81236279>] ? __register_sysctl_table+0x289/0x5a0
 [<ffffffffa051a24f>] ? mpls_dev_notify+0x1ff/0x300 [mpls_router]
 [<ffffffff8108db7f>] ? notifier_call_chain+0x4f/0x70
 [<ffffffff81470e72>] ? register_netdevice+0x2b2/0x480
 [<ffffffffa0524748>] ? veth_newlink+0x178/0x2d3 [veth]
 [<ffffffff8147f84c>] ? rtnl_newlink+0x73c/0x8e0
 [<ffffffff8147f27a>] ? rtnl_newlink+0x16a/0x8e0
 [<ffffffff81459ff2>] ? __kmalloc_reserve.isra.30+0x32/0x90
 [<ffffffff8147ccfd>] ? rtnetlink_rcv_msg+0x8d/0x250
 [<ffffffff8145b027>] ? __alloc_skb+0x47/0x1f0
 [<ffffffff8149badb>] ? __netlink_lookup+0xab/0xe0
 [<ffffffff8147cc70>] ? rtnetlink_rcv+0x30/0x30
 [<ffffffff8149e7a0>] ? netlink_rcv_skb+0xb0/0xd0
 [<ffffffff8147cc64>] ? rtnetlink_rcv+0x24/0x30
 [<ffffffff8149df17>] ? netlink_unicast+0x107/0x1a0
 [<ffffffff8149e4be>] ? netlink_sendmsg+0x50e/0x630
 [<ffffffff8145209c>] ? sock_sendmsg+0x3c/0x50
 [<ffffffff81452beb>] ? ___sys_sendmsg+0x27b/0x290
 [<ffffffff811bd258>] ? mem_cgroup_try_charge+0x88/0x110
 [<ffffffff811bd5b6>] ? mem_cgroup_commit_charge+0x56/0xa0
 [<ffffffff811d7700>] ? do_filp_open+0x30/0xa0
 [<ffffffff8145336e>] ? __sys_sendmsg+0x3e/0x80
 [<ffffffff8156c3f2>] ? system_call_fastpath+0x16/0x75

Fix this by unregistering the previous sysctl table (registered for
the path containing the original device name) and re-registering the
table for the path containing the new device name.

Fixes: 37bde799 ("mpls: Per-device enabling of packet input")
Reported-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When programming the start of a periodic output, the code wrongly places
the seconds value into the "low" register and the nanoseconds into the
"high" register.  Even though this is backwards, it slipped through my
testing, because the re-arming code in the interrupt service routine is
correct, and the signal does appear starting with the second edge.

This patch fixes the issue by programming the registers correctly.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not all architectures have io memory.

Fixes:
drivers/block/pmem.c: In function ‘pmem_alloc’:
drivers/block/pmem.c:146:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration]
  pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
  ^
drivers/block/pmem.c:146:18: warning: assignment makes pointer from integer without a cast [enabled by default]
  pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
                  ^
drivers/block/pmem.c:182:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
  iounmap(pmem->virt_addr);
  ^
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ring buffer benchmark buglet fix from Steven Rostedt:
 "Wang Long fixed a minor bug in the module parameter for the ring
  buffer benchmark, where the produce_fifo was being ignored and the
  producer thread's priority was being set with the consumer_fifo
  parameter"

* tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer-benchmark: Fix the wrong sched_priority of producer

 =================================
 [ INFO: inconsistent lock state ]
 4.1.0-rc7+ #217 Tainted: G           O
 ---------------------------------
 inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
 swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70
 {SOFTIRQ-ON-W} state was registered at:
   [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
   [<ffffffff810c1947>] lock_acquire+0xb7/0x290
   [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
   [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0  <-- take the lock in process context
[..]
  [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
  [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
  [<ffffffff810c1947>] lock_acquire+0xb7/0x290
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70    <-- take the lock in softirq
  [<ffffffff8143bfec>] part_release+0x1c/0x50
  [<ffffffff8158edf6>] device_release+0x36/0xb0
  [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
  [<ffffffff8145aad0>] kobject_put+0x30/0x70
  [<ffffffff8158f147>] put_device+0x17/0x20
  [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
  [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
  [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
  [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
  [<ffffffff81067e2e>] __do_softirq+0xde/0x600

Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests.  This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path: 2da78092 "block:
Fix dev_t minor allocation lifetime".  Both this and 2da78092 are
candidates for -stable.

Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime")
Cc: <stable@vger.kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Some error paths didn't unreserve the BO. This resulted in a deadlock
down the road on the next attempt to reserve the (still reserved) BO.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90873
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 7fe04d6f.

Fixes some systems at the expense of others.  Need to properly
fix the pll divider selection.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651

Cc: stable@vger.kernel.org

This reverts commit a10f0df0.

Fixes some systems at the expense of others.  Need to properly
fix the pll divider selection.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651

Cc: stable@vger.kernel.org

Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems
the SMC engine is relying on some state inside the CP engine. CP needs
to chew at least one packet for it to get in good state for dynamic
power management.

This patch simply disabled and re-enable DPM after the ring test which
is enough to avoid the freeze.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The producer should be used producer_fifo as its sched_priority,
so correct it.

Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com

Cc: stable@vger.kernel.org # 2.6.33+
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When incoming packet qualifies for rx_copybreak, we copy the data to newly
allocated skb. We do not free/unmap the original buffer. At this point driver
assumes this buffer is unallocated. When enic_rq_alloc_buf() is called for
buffer allocation, it checks if buf->os_buf is NULL. If its not NULL that means
buffer can be re-used.

When vnic_rq_clean() is called for freeing all rq buffers, and if the
rx_copybreak reused buffer falls outside the used desc, we do not free the
buffer. The following trace is observer when dma-debug is enabled.

Fix is to walk through complete ring and clean if buffer is present.

[   40.555386] ------------[ cut here ]------------
[   40.555396] WARNING: CPU: 0 PID: 491 at lib/dma-debug.c:971 dma_debug_device_change+0x188/0x1f0()
[   40.555400] pci 0000:06:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=4]
               One of leaked entries details: [device address=0x00000000ff4cc040] [size=9018 bytes] [mapped with DMA_FROM_DEVICE] [mapped as single]
[   40.555402] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw joydev mousedev gf128mul hid_generic glue_helper mgag200 usbhid ttm hid drm_kms_helper drm ablk_helper syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core iTCO_wdt cryptd mac_hid evdev pcspkr sb_edac edac_core tpm_tis iTCO_vendor_support ipmi_si wmi tpm ipmi_msghandler shpchp lpc_ich processor acpi_power_meter hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache sd_mod ehci_pci ehci_hcd megaraid_sas usbcore scsi_mod usb_common enic(-) crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2
[   40.555467] CPU: 0 PID: 491 Comm: rmmod Not tainted 4.1.0-rc7-ARCH-01305-gf59b71f #118
[   40.555469] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014
[   40.555471]  0000000000000000 00000000e2f8a5b7 ffff880275f8bc48 ffffffff8158d6f0
[   40.555474]  0000000000000000 ffff880275f8bca0 ffff880275f8bc88 ffffffff8107b04a
[   40.555477]  ffff8802734e0000 0000000000000004 ffff8804763fb3c0 ffff88027600b650
[   40.555480] Call Trace:
[   40.555488]  [<ffffffff8158d6f0>] dump_stack+0x4f/0x7b
[   40.555492]  [<ffffffff8107b04a>] warn_slowpath_common+0x8a/0xc0
[   40.555494]  [<ffffffff8107b0d5>] warn_slowpath_fmt+0x55/0x70
[   40.555498]  [<ffffffff812fa408>] dma_debug_device_change+0x188/0x1f0
[   40.555503]  [<ffffffff8109aaef>] notifier_call_chain+0x4f/0x80
[   40.555506]  [<ffffffff8109aecb>] __blocking_notifier_call_chain+0x4b/0x70
[   40.555510]  [<ffffffff8109af06>] blocking_notifier_call_chain+0x16/0x20
[   40.555514]  [<ffffffff813f8066>] __device_release_driver+0xf6/0x120
[   40.555518]  [<ffffffff813f8b08>] driver_detach+0xc8/0xd0
[   40.555523]  [<ffffffff813f7c59>] bus_remove_driver+0x59/0xe0
[   40.555527]  [<ffffffff813f93a0>] driver_unregister+0x30/0x70
[   40.555534]  [<ffffffff8131532d>] pci_unregister_driver+0x2d/0xa0
[   40.555542]  [<ffffffffa0200ec2>] enic_cleanup_module+0x10/0x14e [enic]
[   40.555547]  [<ffffffff8110158f>] SyS_delete_module+0x1cf/0x280
[   40.555551]  [<ffffffff811e284e>] ? ____fput+0xe/0x10
[   40.555554]  [<ffffffff810980ec>] ? task_work_run+0xbc/0xf0
[   40.555558]  [<ffffffff815930ee>] system_call_fastpath+0x12/0x71
[   40.555561] ---[ end trace 4988cadc77c2b236 ]---
[   40.555562] Mapped at:
[   40.555563]  [<ffffffff812fa865>] debug_dma_map_page+0x95/0x150
[   40.555566]  [<ffffffffa01f4a88>] enic_rq_alloc_buf+0x1b8/0x360 [enic]
[   40.555570]  [<ffffffffa01f7658>] enic_open+0xf8/0x820 [enic]
[   40.555574]  [<ffffffff8148d50e>] __dev_open+0xce/0x150
[   40.555579]  [<ffffffff8148d851>] __dev_change_flags+0xa1/0x170
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We do not check the return value of enic_dev_stats_dump(). If allocation
fails, we will hit NULL pointer reference.

Return only if memory allocation fails. For other failures, we return the
previously recorded values.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>