- 08 Apr, 2017 40 commits
-
-
Prasant Jalan authored
checkpatch gives WARNING: Avoid line continuations in quoted strings. Trivial fix by removing line continuations and adding another quote at the start of next line. Signed-off-by:
Prasant Jalan <prasant.jalan@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Prasant Jalan authored
lynxfb_suspend() & lynxfb_resume() return on errors while holding console_lock. Adding 'goto' such that proper cleanups can be done before returning from function and therefore console_lock can be released before returning. Signed-off-by:
-
Andrea della Porta authored
staging: sm750fb: ddk750_display.c - fixed the following checkpatch warning: WARNING: line over 80 characters #149: FILE: drivers/staging/sm750fb/ddk750_display.c:149: + swPanelPowerSequence((output & PNL_SEQ_MASK) >> PNL_SEQ_OFFSET, 4); Signed-off-by:
Andrea della Porta <sfaragnaus@gmail.com> Signed-off-by:
-
Aishwarya Pant authored
Remove unnecessary log messages in the driver which are just tracking function entry and exits. Signed-off-by:
Aishwarya Pant <aishpant@gmail.com> Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in various comments and pr_debug messages Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Maciek Borzecki authored
struct hfa384x_pdrec len and code fields as clearly little endian, mark both fields as such. pda->buf is also clearly little endian. Fixes sparse warnings: drivers/staging/wlan-ng/prism2fw.c:613:16: warning: cast to restricted __le16 drivers/staging/wlan-ng/prism2fw.c:616:21: warning: cast to restricted __le16 drivers/staging/wlan-ng/prism2fw.c:625:21: warning: cast to restricted __le16 Signed-off-by:
Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by:
-
Ian Abbott authored
Convert the `CLK_CLKFIG(chan, src)` macro to a static function `pci224_clk_config(chan, src)`. This is consistent with an earlier change to convert `GAT_CONFIG(chan, src)` to a static function. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
Let the compiler figure out whether `pci224_gat_confip()` should be inlined by itself. Signed-off-by:
-
Ian Abbott authored
Convert the `CLK_CONFIG(chan, src)` macro to a static function `pci230_clk_config(chan, src)`. This is consistent with an earlier change to convert `GAT_CONFIG(chan, src)` to a static function. Signed-off-by:
-
Ian Abbott authored
Let the compiler figure out whether `pci230_gat_config()` should be inlined by itself. Signed-off-by:
-
Colin Ian King authored
The strncasecmp of buff against the literal string RSSI is using variable length which is zero. This should be instead using the variable size instead. Also remove the redundant variable length. Detected by PVS-Studio, warning: V575 Signed-off-by:
-
Aditya Shankar authored
The vif->idx value is always 0 for two interfaces. wl->vif_num = 0; loop { ... vif->idx = wl->vif_num; ... wl->vif_num = i; .... i++; ... } At present, vif->idx is assigned the value of wl->vif_num at the beginning of this block and device is initialized based on this index value. In the next iteration, wl->vif_num is still 0 as it is only updated later but gets assigned to vif->idx in the beginning. This causes problems later when we try to reference a particular interface and also while configuring the firmware. This patch moves the assignment to vif->idx from the beginning of the block to after wl->vif_num is updated with latest value of i. Fixes: commit 735bb39c ("staging: wilc1000: simplify vif[i]->ndev accesses") Cc: <stable@vger.kernel.org> Signed-off-by:Aditya Shankar <aditya.shankar@microchip.com> Signed-off-by:
-
Aditya Shankar authored
The configuration packet format has changed in the newer wilc firmware versions 14.2 and up. This update ensures that the firmware is initialized correctly by the host and configured in the required mode. Signed-off-by:
-
Valerio Genovese authored
This was reported in checkpatch.pl: ERROR: space required after that close brace '}' Changes in v2: add space after close brace '}' also at line 35, before it was only for 34. Signed-off-by:
Valerio Genovese <valerio.click@gmail.com> Signed-off-by:
-
Alfonso Lima Astor authored
Coding style problem detected by checkpatch.pl ERROR: space prohibited before that ',' Signed-off-by:
Alfonso Lima Astor <alfonsolimaastor@gmail.com> Signed-off-by:
-
Alfonso Lima Astor authored
This macro is not used and also had a style error. I have run grep and compiled the module to be sure. Signed-off-by:
-
Riku Salminen authored
Removed Free Software Foundation's address from the copyright notice and replaced it with a link to http://www.gnu.org/licensesSigned-off-by:
Riku Salminen <riku@laatikko.io> Signed-off-by:
-
Arnd Bergmann authored
When COMEDI_NI_LABPC is built-in and COMEDI_NI_LABPC_ISA is a loadable module, thhe ISA DMA code is not reachable by the common module, causing a link error: drivers/staging/built-in.o: In function `labpc_interrupt': ni_labpc_common.c:(.text+0x1d178): undefined reference to `labpc_handle_dma_status' ni_labpc_common.c:(.text+0x1d1cb): undefined reference to `labpc_drain_dma' drivers/staging/built-in.o: In function `labpc_ai_cmd': ni_labpc_common.c:(.text+0x1d8ad): undefined reference to `labpc_setup_dma' This changes the definition of COMEDI_NI_LABPC_ISADMA so that it will also be builtin for that case. This looks like a rather old bug, but I have never seen this in randconfig testing until today. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Hans de Goede authored
The rtl8723bs is found on quite a few systems used by Linux users, such as on Atom systems (Intel Computestick and various other Atom based devices) and on many (budget) ARM boards such as the CHIP. The plan moving forward with this is for the new clean, written from scratch, rtl8xxxu driver to eventually gain support for sdio devices. But there is no clear timeline for that, so lets add this driver included in staging for now. Cc: Bastien Nocera <hadess@hadess.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Jes Sorensen <jes.sorensen@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Dan Cashman authored
Wrap arguments of call to vnt_control_out() to avoid exceeding 80 character limit, but maintain alignment. Signed-off-by:
Daniel Cashman <dan.a.cashman@gmail.com> Signed-off-by:
-
Dan Cashman authored
Change embedded function name in vnt_rf_set_txpower with %s format with __func__ argument to make it consistent with other part of if-else and kernel coding style standards as reported by checkpatch. Signed-off-by:
-
Dan Cashman authored
Address checkpatch errors encountered in rf.c by removing use of spaces and replacing with properly aligned tabs. Signed-off-by:
-
David Kershner authored
Kernel day0 testing robot reported a kernel BUG at drivers/base/driver.c! with the following call stack: [ 14.963563] ------------[ cut here ]------------ [ 14.967298] kernel BUG at drivers/base/driver.c:153! [ 14.970948] invalid opcode: 0000 [#1] SMP [ 14.974013] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc4-00790-g0789e2c #1 [ 14.978221] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 14.983417] task: ffff88001ea46040 task.stack: ffffc90000008000 [ 14.987315] RIP: 0010:driver_register+0xa1/0xd0 [ 14.990044] RSP: 0000:ffffc9000000be60 EFLAGS: 00010246 [ 14.993039] RAX: 0000000000000000 RBX: ffffffff831d4c20 RCX: 0000000000000000 [ 14.997040] RDX: 000000000000004d RSI: ffffffff831d47c0 RDI: ffffffff831d4c20 [ 15.001511] RBP: ffffc9000000be78 R08: ffffc9000000be78 R09: ffffc9000000be7c [ 15.006163] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 15.010068] R13: 00000000ffffffff R14: ffffffff832f3923 R15: 0000000000000000 [ 15.013715] FS: 0000000000000000(0000) GS:ffff88001fa00000(0000) knlGS:0000000000000000 [ 15.017460] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.021268] CR2: 0000000000000000 CR3: 0000000003009000 CR4: 00000000000006b0 [ 15.025633] Call Trace: [ 15.028069] ? visorbus_register_visor_driver+0x3f/0x60 [ 15.031065] ? init_unisys+0x3a/0x90 [ 15.033562] ? device_resume_response+0x50/0x50 [ 15.036083] visorinput_init+0x10/0x20 [ 15.038937] do_one_initcall+0x9a/0x164 [ 15.041838] ? set_debug_rodata+0x12/0x12 [ 15.045333] kernel_init_freeable+0x11e/0x1a1 [ 15.048369] ? rest_init+0x80/0x80 [ 15.050813] kernel_init+0x9/0x100 [ 15.053353] ret_from_fork+0x2c/0x40 [ 15.056009] Code: ff 85 c0 41 89 c4 75 13 48 8b 7b 70 31 f6 e8 97 16 be ff 44 89 e0 5b 41 5c 5d c3 48 89 df e8 57 e1 ff ff 44 89 e0 5b 41 5c 5d c3 <0f> 0b 48 8b 33 48 c7 c7 a0 dd d5 82 e8 ec f0 6f ff 48 8b 73 08 [ 15.065144] RIP: driver_register+0xa1/0xd0 RSP: ffffc9000000be60 [ 15.068360] ---[ end trace 7d13369c38d80a8f ]--- This bug will occur if the visorbus driver is built-in to the kernel, and the resulting kernel is run in an environment where visorbus devices are NOT supported, and an attempt is made to load any of the drivers: visorhba, visornic, or visorinput. Checked to see if we have called bus_register, if not do not call driver_register. Signed-off-by:
David Kershner <david.kershner@unisys.com> Fixes: 5b6f9b95 ("staging: unisys: visorbus: get rid of create_bus_type.") Reviewed-by:
Tim Sell <timothy.sell@unisys.com> Reviewed-by:
David Binder <david.binder@unisys.com> Signed-off-by:
-
Thomas Jespersen authored
Replace symbolic permissions S_IRUSR and S_IWUSR for their octal counterparts Signed-off-by:
Thomas Jespersen <laumann.thomas@gmail.com> Acked-by:
-
Darryl T. Agostinelli authored
$ make includecheck ./drivers/staging/lustre/lustre/ptlrpc/layout.c: ../include/lustre_debug.h is included more than once. Signed-off-by:
Darryl T. Agostinelli <dagostinelli@gmail.com> Signed-off-by:
-
Pushkar Jambhlekar authored
Adding a blank line after declaration Signed-off-by:
Pushkar Jambhlekar <pushkar.iit@gmail.com> Signed-off-by:
-
Christian Gromm authored
Inside the function store_value() the table of writable registers need to be passed to function get_static_reg_addr() or else the correct register address is never going to be found. Reported-by:
Alex Riesen <alexander.riesen@cetitec.com> Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Signed-off-by:
-
Andrey Shvetsov authored
Despite the user payload may not be bigger than (2**16 - 1) bytes, the final packet size may be bigger because of the gap space needed for the controller. This patch removes the temporary variables of the type u16 that are used to hold the offsets that may be bigger than 2**16 bytes. Signed-off-by:
Andrey Shvetsov <andrey.shvetsov@k2l.de> Signed-off-by:
-
Andrey Shvetsov authored
The final size of the buffer used for the streaming transfer consists of the size for the user payload (buffer_size) and the size for the gaps needed by the controller (extra_len). The current implementation of the hdm_configure_channel() corrects the buffer size down to the next appropriate for the hardware value, that is the whole number of frames, but uses the old unaligned value to calculate the extra_len. Current patch fixes the described problem. Signed-off-by:
-
Andrey Shvetsov authored
When a channel is being removed while an application holds the corresponding character device, this device is going to be destroyed only after the application closes the file descriptor and releases character device. In case the channel appears again before the application closes the file descriptor it holds, the channel cannot be linked. This patch changes the described behavior and destroys the character device at the time the channel get disconnected from the AIM. Signed-off-by:
-
Andrey Shvetsov authored
This patch replaces three temporary variables representing the attributes to control the links between the AIMs and HDMs with an array of three elements to keep the corresponding code compact. Signed-off-by:
-
Andrey Shvetsov authored
Currently an AIM has the following properties available to manage links: - write-only "remove_link" used to remove a link from a list - read/write "add_link" used to add a link to a list and display them This patch transfers the read functionality of "add_link" to the new read-only property "links" to build consistent set of properties to control the list of links. Signed-off-by:
-
Andrey Shvetsov authored
This patch replaces 13 temporary variables representing the attributes to control the channel with an array of 13 elements to keep the corresponding code compact. Signed-off-by:
-
Christian Gromm authored
This patch replaces the proprietary macros with those provided by the kernel. Signed-off-by:
-
Christian Gromm authored
This patch fixes the names of the show/store functions to match the naming convention. Signed-off-by:
-
Andrey Shvetsov authored
This patch replaces the name store_remove_link by the remove_link_store in the comment for the corresponding function. Signed-off-by:
-
Andrey Shvetsov authored
This patch replaces the name store_add_link by the add_link_store in the comment for the corresponding function. Signed-off-by:
-
Laura Abbott authored
Device specific platform support has been haphazard for Ion. There have been several independent attempts and there are still objections to what bindings exist right now. Just remove everything for a fresh start. Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Laura Abbott authored
ION_IOC_MAP is the same as ION_IOC_SHARE. We really don't need two identical interfaces. Remove it. Signed-off-by:
-
Laura Abbott authored
With the expansion of dma-buf and the move for Ion to be come just an allocator, the import mechanism is mostly useless. There isn't a kernel component to Ion anymore and handles are private to Ion. Remove this interface. Signed-off-by:
-
