- 25 Jul, 2013 2 commits
-
-
Michael Neuling authored
commit 540e07c6 upstream. In 9422de3e "powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers" we changed the way we mark extraneous irqs with this: - info->extraneous_interrupt = !((bp->attr.bp_addr <= dar) && - (dar - bp->attr.bp_addr < bp->attr.bp_len)); + if (!((bp->attr.bp_addr <= dar) && + (dar - bp->attr.bp_addr < bp->attr.bp_len))) + info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ; Unfortunately this is bogus as it never clears extraneous IRQ if it's already set. This correctly clears extraneous IRQ before possibly setting it. Signed-off-by:
Michael Neuling <mikey@neuling.org> Reported-by:
Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Neuling authored
commit b0b0aa9c upstream. The smallest match region for both the DABR and DAWR is 8 bytes, so the kernel needs to filter matches when users want to look at regions smaller than this. Currently we set the length of PPC_BREAKPOINT_MODE_EXACT breakpoints to 8. This is wrong as in exact mode we should only match on 1 address, hence the length should be 1. This ensures that the kernel will filter out any exact mode hardware breakpoint matches on any addresses other than the requested one. Signed-off-by:
-
- 22 Jul, 2013 38 commits
-
-
Greg Kroah-Hartman authored
-
Richard Genoud authored
commit beadadfa upstream. When mounting an UBIFS R/W volume, we have the message: UBIFS: mounted UBI device 0, volume 1, name "rootfs"(null) With this patch, we'll have: UBIFS: mounted UBI device 0, volume 1, name "rootfs" Which is, I think, what was intended. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Steve French authored
commit fdf96a90 upstream. This is RH bug 970891 Uppercasing of username during calculation of ntlmv2 hash fails because UniStrupr function does not handle big endian wchars. Also fix a comment in the same code to reflect its correct usage. [To make it easier for stable (rather than require 2nd patch) fixed this patch of Shirish's to remove endian warning generated by sparse -- steve f.] Reported-by:
steve <sanpatr1@in.ibm.com> Signed-off-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Wanpeng Li authored
commit cea27eb2 upstream. The logic for the memory-remove code fails to correctly account the Total High Memory when a memory block which contains High Memory is offlined as shown in the example below. The following patch fixes it. Before logic memory remove: MemTotal: 7603740 kB MemFree: 6329612 kB Buffers: 94352 kB Cached: 872008 kB SwapCached: 0 kB Active: 626932 kB Inactive: 519216 kB Active(anon): 180776 kB Inactive(anon): 222944 kB Active(file): 446156 kB Inactive(file): 296272 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 7294672 kB HighFree: 5704696 kB LowTotal: 309068 kB LowFree: 624916 kB After logic memory remove: MemTotal: 7079452 kB MemFree: 5805976 kB Buffers: 94372 kB Cached: 872000 kB SwapCached: 0 kB Active: 626936 kB Inactive: 519236 kB Active(anon): 180780 kB Inactive(anon): 222944 kB Active(file): 446156 kB Inactive(file): 296292 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 7294672 kB HighFree: 5181024 kB LowTotal: 4294752076 kB LowFree: 624952 kB [mhocko@suse.cz: fix CONFIG_HIGHMEM=n build] Signed-off-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Michal Hocko authored
commit f37a9691 upstream. mem_cgroup_css_online calls mem_cgroup_put if memcg_init_kmem fails. This is not correct because only memcg_propagate_kmem takes an additional reference while mem_cgroup_sockets_init is allowed to fail as well (although no current implementation fails) but it doesn't take any reference. This all suggests that it should be memcg_propagate_kmem that should clean up after itself so this patch moves mem_cgroup_put over there. Unfortunately this is not that easy (as pointed out by Li Zefan) because memcg_kmem_mark_dead marks the group dead (KMEM_ACCOUNTED_DEAD) if it is marked active (KMEM_ACCOUNTED_ACTIVE) which is the case even if memcg_propagate_kmem fails so the additional reference is dropped in that case in kmem_cgroup_destroy which means that the reference would be dropped two times. The easiest way then would be to simply remove mem_cgrroup_put from mem_cgroup_css_online and rely on kmem_cgroup_destroy doing the right thing. Signed-off-by:
Li Zefan <lizefan@huawei.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
commit da331ba8 upstream. tasklet_kill() may sleep so call it before taking pch->lock. Fixes following lockup: BUG: scheduling while atomic: cat/2383/0x00000002 Modules linked in: unwind_backtrace+0x0/0xfc __schedule_bug+0x4c/0x58 __schedule+0x690/0x6e0 sys_sched_yield+0x70/0x78 tasklet_kill+0x34/0x8c pl330_free_chan_resources+0x24/0x88 dma_chan_put+0x4c/0x50 [...] BUG: spinlock lockup suspected on CPU#0, swapper/0/0 lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1 unwind_backtrace+0x0/0xfc do_raw_spin_lock+0x194/0x204 _raw_spin_lock_irqsave+0x20/0x28 pl330_tasklet+0x2c/0x5a8 tasklet_action+0xfc/0x114 __do_softirq+0xe4/0x19c irq_exit+0x98/0x9c handle_IPI+0x124/0x16c gic_handle_irq+0x64/0x68 __irq_svc+0x40/0x70 cpuidle_wrap_enter+0x4c/0xa0 cpuidle_enter_state+0x18/0x68 cpuidle_idle_call+0xac/0xe0 cpu_idle+0xac/0xf0 Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Jassi Brar <jassisinghbrar@gmail.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Russell King authored
commit 319e0b4f upstream. Commit 83db0384 (mm/ARM: use common help functions to free reserved pages) broke booting on the Assabet by trying to convert a PFN to a virtual address using the __va() macro. This macro takes the physical address, not a PFN. Fix this. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Magnus Damm authored
commit 1eb14ea1 upstream. Fix GIO3 base addresses for EMEV2. This bug was introduced by 088efd92 ("mach-shmobile: Emma Mobile EV2 GPIO support V3") which was included in v3.5. Signed-off-by:
Magnus Damm <damm@opensource.se> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Takanari Hayama authored
commit f820b605 upstream. Fix base address and IRQ resources associated with SCIFB0. This bug was introduced by e481a528 ("ARM: shmobile: r8a73a4 SCIF support V3") which was included in v3.10. Signed-off-by:
Takanari Hayama <taki@igel.co.jp> Acked-by:
-
Lorenzo Pieralisi authored
commit 7925e89f upstream. This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Jason Liu authored
commit cbbe6f82 upstream. When the local timer freq changed, the twd_update_frequency function should be run all the CPUs include itself, otherwise, the twd freq will not get updated and the local timer will not run correcttly. smp_call_function will run functions on all other CPUs, but not include himself, this is not correct,use on_each_cpu instead to fix this issue. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by:
Jason Liu <r64343@freescale.com> Signed-off-by:
-
Marc Zyngier authored
commit 0d0752bc upstream. Looking into the active_asids array is not enough, as we also need to look into the reserved_asids array (they both represent processes that are currently running). Also, not holding the ASID allocator lock is racy, as another CPU could schedule that process and trigger a rollover, making the erratum workaround miss an IPI. Exposing this outside of context.c is a little ugly on the side, so let's define a new entry point that the erratum workaround can call to obtain the cpumask. Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit b8e4a474 upstream. On a CPU that never ran anything, both the active and reserved ASID fields are set to zero. In this case the ASID_TO_IDX() macro will return -1, which is not a very useful value to index a bitmap. Instead of trying to offset the ASID so that ASID #1 is actually bit 0 in the asid_map bitmap, just always ignore bit 0 and start the search from bit 1. This makes the code a bit more readable, and without risk of OoB access. Acked-by:
-
Marc Zyngier authored
commit ae120d9e upstream. When a CPU is running a process, the ASID for that process is held in a per-CPU variable (the "active ASIDs" array). When the ASID allocator handles a rollover, it copies the active ASIDs into a "reserved ASIDs" array to ensure that a process currently running on another CPU will continue to run unaffected. The active array is zero-ed to indicate that a rollover occurred. Because of this mechanism, a reserved ASID is only remembered for a single rollover. A subsequent rollover will completely refill the reserved ASIDs array. In a severely oversubscribed environment where a CPU can be prevented from running for extended periods of time (think virtual machines), the above has a horrible side effect: [P{a} denotes process P running with ASID a] CPU-0 CPU-1 A{x} [active = <x 0>] [suspended] runs B{y} [active = <x y>] [rollover: active = <0 0> reserved = <x y>] runs B{y} [active = <0 y> reserved = <x y>] [rollover: active = <0 0> reserved = <0 y>] runs C{x} [active = <0 x>] [resumes] runs A{x} At that stage, both A and C have the same ASID, with deadly consequences. The fix is to preserve reserved ASIDs across rollovers if the CPU doesn't have an active ASID when the rollover occurs. Acked-by:
-
Jed Davis authored
commit c5f927a6 upstream. With this change, we no longer lose the innermost entry in the user-mode part of the call chain. See also the x86 port, which includes the ip. It's possible to partially work around this problem by post-processing the data to use the PERF_SAMPLE_IP value, but this works only if the CPU wasn't in the kernel when the sample was taken. Signed-off-by:
Jed Davis <jld@mozilla.com> Signed-off-by:
-
Theodore Ts'o authored
commit e7676a70 upstream. The filesystem should not be marked inconsistent if ext4_free_blocks() is not able to allocate memory. Unfortunately some callers (most notably ext4_truncate) don't have a way to reflect an error back up to the VFS. And even if we did, most userspace applications won't deal with most system calls returning ENOMEM anyway. Reported-by:
Nagachandra P <nagachandra@gmail.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit ad065dd0 upstream. We now print mount options in a generic fashion in ext4_show_options(), so we shouldn't be explicitly printing the {usr,grp}quota options in ext4_show_quota_options(). Without this patch, /proc/mounts can look like this: /dev/vdb /vdb ext4 rw,relatime,quota,usrquota,data=ordered,usrquota 0 0 ^^^^^^^^ ^^^^^^^^ Signed-off-by:
-
Theodore Ts'o authored
commit 960fd856 upstream. The function ext4_get_group_number() was introduced as an optimization in commit bd86298e. Unfortunately, this commit incorrectly calculate the group number for file systems with a 1k block size (when s_first_data_block is 1 instead of zero). This could cause the following kernel BUG: [ 568.877799] ------------[ cut here ]------------ [ 568.877833] kernel BUG at fs/ext4/mballoc.c:3728! [ 568.877840] Oops: Exception in kernel mode, sig: 5 [#1] [ 568.877845] SMP NR_CPUS=32 NUMA pSeries [ 568.877852] Modules linked in: binfmt_misc [ 568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809ff-dirty #1 [ 568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000 [ 568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8 [ 568.877879] REGS: c0000001fa956ed0 TRAP: 0700 Not tainted (3.10.0-03216-g7c6809ff-dirty) [ 568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 24000428 XER: 00000000 [ 568.877902] SOFTE: 1 [ 568.877905] CFAR: c0000000002b5464 [ 568.877908] GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000 GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000 GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0 GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672 GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000 GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288 GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10 [ 568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0 [ 568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 [ 568.878004] Call Trace: [ 568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable) [ 568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444 [ 568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734 [ 568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4 [ 568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178 [ 568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490 [ 568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60 [ 568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80 [ 568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0 [ 568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc [ 568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4 [ 568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80 [ 568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c [ 568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90 [ 568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c [ 568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c [ 568.878125] Instruction dump: [ 568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70 [ 568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78 [ 568.878160] ---[ end trace 594d911d9654770b ]--- In addition fix the STD_GROUP optimization so that it works for bigalloc file systems as well. Signed-off-by:
Li Zhong <lizhongfs@gmail.com> Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Jan Kara authored
commit 8af8eecc upstream. The arithmetics adding delalloc blocks to the number of used blocks in ext4_getattr() can easily overflow on 32-bit archs as we first multiply number of blocks by blocksize and then divide back by 512. Make the arithmetics more clever and also use proper type (unsigned long long instead of unsigned long). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit a60697f4 upstream. On 32-bit architectures with 32-bit sector_t computation of data offset in ext4_xattr_fiemap() can overflow resulting in reporting bogus data location. Fix the problem by typing block number to proper type before shifting. Signed-off-by:
-
Jan Kara authored
commit e7293fd1 upstream. ext4_lblk_t is just u32 so multiplying it by blocksize can easily overflow for files larger than 4 GB. Fix that by properly typing the block offsets before shifting. Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
-
Jan Kara authored
commit eaf37937 upstream. On 32-bit archs when sector_t is defined as 32-bit the logic computing data offset in ext4_inline_data_fiemap(). Fix that by properly typing the shifted value. Signed-off-by:
-
Josef Bacik authored
commit 7fb7d76f upstream. There is another bug in the tree mod log stuff in that we're calling tree_mod_log_free_eb every single time a block is cow'ed. The problem with this is that if this block is shared by multiple snapshots we will call this multiple times per block, so if we go to rewind the mod log for this block we'll BUG_ON() in __tree_mod_log_rewind because we try to rewind a free twice. We only want to call tree_mod_log_free_eb if we are actually freeing the block. With this patch I no longer hit the panic in __tree_mod_log_rewind. Thanks, Reviewed-by:
Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
Josef Bacik authored
commit f1ca7e98 upstream. We need to hold the tree mod log lock in __tree_mod_log_rewind since we walk forward in the tree mod entries, otherwise we'll end up with random entries and trip the BUG_ON() at the front of __tree_mod_log_rewind. This fixes the panics people were seeing when running find /whatever -type f -exec btrfs fi defrag {} \; Thansk, Signed-off-by:
-
Josef Bacik authored
commit 139f807a upstream. This fixes bugzilla 57491. If we take a snapshot of a fs with a unlink ongoing and then try to send that root we will run into problems. When comparing with a parent root we will search the parents and the send roots commit_root, which if we've just created the snapshot will include the file that needs to be evicted by the orphan cleanup. So when we find a changed extent we will try and copy that info into the send stream, but when we lookup the inode we use the normal root, which no longer has the inode because the orphan cleanup deleted it. The best solution I have for this is to check our otransid with the generation of the commit root and if they match just commit the transaction again, that way we get the changes from the orphan cleanup. With this patch the reproducer I made for this bugzilla no longer returns ESTALE when trying to do the send. Thanks, Reported-by:
Chris Wilson <jakdaw@gmail.com> Signed-off-by:
-
Bart Van Assche authored
commit 9e04d380 upstream. Direct compare of jiffies related values does not work in the wrap around case. Replace it with time_is_after_jiffies(). Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/519BC066.5080600@acm.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Shane Huang authored
commit 912b9ac6 upstream. ata_link_online() check in ahci_error_intr() is unnecessary, it should be removed otherwise may lead to lockup with FBS enabled PMP. http://marc.info/?l=linux-ide&m=137050421603272&w=2Reported-by:
Yu Liu <liuyu.ac@gmail.com> Signed-off-by:
Shane Huang <shane.huang@amd.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Seth Heasley authored
commit 1cfc7df3 upstream. This patch adds the AHCI-mode SATA DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by:
Seth Heasley <seth.heasley@intel.com> Signed-off-by:
-
Shane Huang authored
commit fafe5c3d upstream. To add AMD CZ SATA controller device ID of IDE mode. [bhelgaas: drop pci_ids.h update] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
-
Emmanuel Grumbach authored
commit 8a487b1a upstream. When the queue is unmapped while it was so loaded that mac80211's was stopped, we need to wake the queue after having freed all the packets in the queue. Not doing so can result in weird stuff like: * run lots of traffic (mac80211's queue gets stopped) * RFKILL * de-assert RFKILL * no traffic Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit b967613d upstream. When a queue is disabled, it frees all its entries. Later, the op_mode might still get notifications from the firmware that triggers to free entries in the tx queue. The transport should be prepared for these races and know to ignore reclaim calls on queues that have been disabled and whose entries have been freed. Signed-off-by:
-
Jiang Liu authored
commit 343df771 upstream. After calling device_register(&bridge->dev), the bridge is reference- counted, and it is illegal to call kfree() on it except in the release function. [bhelgaas: changelog, use put_device() after device_register() failure] Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Signed-off-by:
-
Xudong Hao authored
commit fbf33f51 upstream. Commit 4f535093 "PCI: Put pci_dev in device tree as early as possible" moves device registering from pci_bus_add_devices() to pci_device_add(). That causes problems for virtual functions because device_add(&virtfn->dev) is called before setting the virtfn->is_virtfn flag, which then causes Xen to report PCI virtual functions as PCI physical functions. Fix it by setting virtfn->is_virtfn before calling pci_device_add(). [Jiang Liu]: Move the setting of virtfn->is_virtfn ahead further for better readability and modify changelog. Signed-off-by:
Xudong Hao <xudong.hao@intel.com> Signed-off-by:
-
Paul Clements authored
commit c378f70a upstream. Currently, when a disconnect is requested by the user (via NBD_DISCONNECT ioctl) the return from NBD_DO_IT is undefined (it is usually one of several error codes). This means that nbd-client does not know if a manual disconnect was performed or whether a network error occurred. Because of this, nbd-client's persist mode (which tries to reconnect after error, but not after manual disconnect) does not always work correctly. This change fixes this by causing NBD_DO_IT to always return 0 if a user requests a disconnect. This means that nbd-client can correctly either persist the connection (if an error occurred) or disconnect (if the user requested it). Signed-off-by:
Paul Clements <paul.clements@steeleye.com> Acked-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Junxiao Bi authored
commit ef962df0 upstream. Inlined xattr shared free space of inode block with inlined data or data extent record, so the size of the later two should be adjusted when inlined xattr is enabled. See ocfs2_xattr_ibody_init(). But this isn't done well when reflink. For inode with inlined data, its max inlined data size is adjusted in ocfs2_duplicate_inline_data(), no problem. But for inode with data extent record, its record count isn't adjusted. Fix it, or data extent record and inlined xattr may overwrite each other, then cause data corruption or xattr failure. One panic caused by this bug in our test environment is the following: kernel BUG at fs/ocfs2/xattr.c:1435! invalid opcode: 0000 [#1] SMP Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1 RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2] RSP: e02b:ffff88007a587948 EFLAGS: 00010283 RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4 RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68 RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010 R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68 FS: 00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process multi_reflink_t Call Trace: ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2] ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2] ocfs2_xa_set+0xcc/0x250 [ocfs2] ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2] __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2] ocfs2_xattr_set+0x6c6/0x890 [ocfs2] ocfs2_xattr_user_set+0x46/0x50 [ocfs2] generic_setxattr+0x70/0x90 __vfs_setxattr_noperm+0x80/0x1a0 vfs_setxattr+0xa9/0xb0 setxattr+0xc3/0x120 sys_fsetxattr+0xa8/0xd0 system_call_fastpath+0x16/0x1b Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Acked-by:
Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by:
-
Chen Gang authored
commit fe746501 upstream. Need include "asm/uaccess.h" to pass compiling. The related error (with allmodconfig): arch/c6x/mm/init.c: In function `paging_init': arch/c6x/mm/init.c:46:2: error: implicit declaration of function `set_fs' [-Werror=implicit-function-declaration] arch/c6x/mm/init.c:46:9: error: `KERNEL_DS' undeclared (first use in this function) arch/c6x/mm/init.c:46:9: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 148c1c8a upstream. The June 2013 Macbook Air (13'') has a new trackpad protocol; four new values are inserted in the header, and the mode switch is no longer needed. This patch adds support for the new devices. Reported-and-tested-by:
Brad Ford <plymouthffl@gmail.com> Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 9d9a04ee upstream. This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8 (0x0291, 0x0292, 0x0293). The touchpad is handled in a separate bcm5974 patch, as usual. Reported-and-tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
