- 11 Oct, 2017 24 commits
-
-
Jitendra Bhivare authored
Version 11.4.0.1 Signed-off-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Jitendra Bhivare authored
Signed-off-by:
-
Jitendra Bhivare authored
The patch fixes errors reported by tools like smatch: - removes unused structure fields - removes dead code - fixes code identation Signed-off-by:
-
Jitendra Bhivare authored
Provide driver version in host data to FW. Signed-off-by:
-
Jitendra Bhivare authored
Add version 1 of GET_HBA_NAME to fetch port specific IQN first. If it fails use version 0 to get the IQN. To use this old IQN names of interfaces needs to be cleared from the iscsiadm database. Signed-off-by:
-
Jitendra Bhivare authored
be_cmd_get_initname pulls GET_HBA_NAME response of 276 bytes in embedded WRB buffer of 236 bytes. Use non-embedded functions to issue the IOCTL. Signed-off-by:
-
Jitendra Bhivare authored
beiscsi_modify_eq_delay is using embedded command to send request of 788 bytes in 236 bytes buffer. Non-embedded command needs to be used in such cases. Use mgmt_alloc_cmd_data fn modified to allow passing of subsystem. Use mgmt_exec_nonemb_cmd fn modified to allow setting of callback. Signed-off-by:
-
Jitendra Bhivare authored
In beiscsi_dev_probe, allocated msi_name does not get freed and enabled HW interrupts are not disabled in iscsi_host_add error case. Add beiscsi_free_irqs fn to handle the cleanup in probe and disable port. Signed-off-by:
-
Jitendra Bhivare authored
mgmt_open_connection is expected to return tag not errno. In error case, just return invalid tag 0. Signed-off-by:
-
Jitendra Bhivare authored
The boot flags exported through sysfs was wrongly reverted to 2. Use boot flag 3 required per spec. Bit 0 Block valid flag Bit 1 Firmware booting selected Signed-off-by:
-
Sreekanth Reddy authored
Bump mpt3sas driver version to v16.100.00.00 Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Sreekanth Reddy authored
Adding PNP ID of Mercator i.e. SAS3616 HBA device. Its device ID is 0xD1 and vendor ID is 0x1000. Signed-off-by:
-
Sreekanth Reddy authored
Enclosure handles are not updated after host reset. As a result, driver device structure is holding previously assigned enclosure handle which is different from the enclosure handle populated in the corresponding device page. Modified the driver to update devices enclosure handles after host reset to current value by referring the enclosure handles from corresponding device pages Signed-off-by:
-
Sreekanth Reddy authored
Display chassis slot information along with other drive location parameters such as slot number and connector name in the logs if chassis slot validity bit is set in 'SAS Enclosure Page 0'. Signed-off-by:
-
Sreekanth Reddy authored
Updated MPI headers to v2.00.48 Signed-off-by:
-
Sreekanth Reddy authored
scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive Whenever an I/O for a RAID volume fails with IOCStatus MPI2_IOCSTATUS_SCSI_IOC_TERMINATED and SCSIStatus equal to (MPI2_SCSI_STATE_TERMINATED | MPI2_SCSI_STATE_NO_SCSI_STATUS) then return the I/O to SCSI midlayer with "DID_RESET" (i.e. retry the IO infinite times) set in the host byte. Previously, the driver was completing the I/O with "DID_SOFT_ERROR" which causes the I/O to be quickly retried. However, firmware needed more time and hence I/Os were failing. Signed-off-by:
-
Sreekanth Reddy authored
For Dev Handles whose value is less than HBA's phys count number, driver would return HBA's SAS address value. As a result, for a Virtual SES device the driver was returning the HBA's SAS address. Updated the driver to return Virtual SES' SAS address. [mkp: clarified commit message] Signed-off-by:
-
Sreekanth Reddy authored
To reduce the memory footprint of the driver in the kdump kernel, we apply the following settings when reset_devices is set: 1. Use single MSI-x vector. 2. Disable RDPQ mode. 3. Set sg_table_size to 32 by default. 4) Set SCSI IO Queue depth to 200. [mkp: fixed commit message] Signed-off-by:
-
Sreekanth Reddy authored
While removing Expander devices, we are removing expander device entry from the list before freeing its child devices. While freeing child device we are finding its parent device node as NULL and therefore we are not freeing the child device's allocated data structures. Updated the driver to remove the expander device from the list only after freeing all its child devices. [mkp: clarified commit message] Signed-off-by:
-
Sreekanth Reddy authored
Earlier Active Cable Exception event with reason code "Cable Degraded (0x02))" was added only for Active Cable. Now this event is extended to Passive cable too. Re-arranged display message accordingly. Also added Cable Exception Event event for SAS3008 & SAS3108 HBAs (i.e. MPI 2.5 spec supporting HBAs). Previously, this event was enabled only for MPI 2.6 spec supporting HBA devices. [mkp: typos] Signed-off-by:
-
Alim Akhtar authored
Since we have converted all the user of UFS_BIT() macro with the actual bit position, let remove unused UFS_BIT()macro. Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Alim Akhtar authored
HOST_ERROR_INDICATOR and DEVICE_ERROR_INDICATOR are not used anywhere. Also as per JESD223C specification, bit[7:4] are reserved. Lets remove these #defines. Signed-off-by:
-
Alim Akhtar authored
Use actual bit position instead of UFS_BIT() macro. This patch also changes bit-17 to meaningful #define. This change is as per discussion here [1] [1] -> https://lkml.org/lkml/2017/8/28/786Signed-off-by:
-
Alim Akhtar authored
Currently UFS HCI uses UFS_BIT() macro to get various bit position for the hardware registers status bits. Which makes code longer instead of shorter. This macro does not improve code readability as well. Lets re-write these macro definition with the actual bit position. Suggested-by:
-
- 03 Oct, 2017 16 commits
-
-
Dick Kennedy authored
Change version to 11.4.0.4 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
James Smart authored
The internal cfg flag is actually smaller, by 1 (for a partial page sge), than the sg list maintained by the driver. Thus the check on sg segments errored out when it shouldn't have Ensure the check is +1 Note: having a value that is less than what it really is is bogus. Correcting it now would be a significant rework. Add this item to the list to be refactored in the merge with efct. Signed-off-by:
-
Dick Kennedy authored
When running NVME io as a NVME host, if the driver is unloaded there would be oops in lpfc_sli4_issue_wqe. When unloading, controllers are torn down and the transport initiates set_property commands to reset the controller and issues aborts to terminate existing io. The drivers nvme abort and fcp io submit routines needed to recognize the driver is unloading and fail the new requests. It didn't, resulting in the oops. Revise the ls and fcp io submit routines to detect the unloading state and properly handle their cleanup. Signed-off-by:
-
Dick Kennedy authored
Support RDP and Multiple Frames If the remote Nport is not logged in, the driver would not populate all the descriptors in the RDP response payload. Doing so would create a payload length that requires multiple frames due to exceeding the default rx buffer size without an explicit login. Currently FC-LS explicitly states the RDP response must be a single frame sequence. Thus we did not violate the standard. Recently, a modification to FC-LS was accepted which allows multi-frame sequences and all vendors have indicated they are interoperable with the change. As such, extend RDP support with the additional fields and send a multi-frame sequence. Signed-off-by:
-
Dick Kennedy authored
Before releasing nvme io back to the io stack for possible retry on other paths, ensure the io termination is interlocked with the target device by ensuring the entire ABTS-LS protocol is complete. Additionally, FC-NVME ABTS-LS protocol does not use RRQ. Remove RRQ behavior from ABTS-LS. Signed-off-by:
-
Dick Kennedy authored
Firmware update fails with: status x17 add_status x56 on the final write If multiple DMA buffers are used for the download, some firmware revs have difficulty with signatures and crcs split across the dma buffer boundaries. Resolve by making all writes be a single 4k page in length. Signed-off-by:
-
Dick Kennedy authored
The driver is seeing a NULL pointer in lpfc_nvme_fcp_io_submit. This was ultimately due to a transport AER being sent on a terminated controller, thus some of the values were not set. In case we're in a system without a corrected transport and in case a race condition occurs where we enter the routine as the teardown is happening in a separate thread, validate the parameters before starting the io. Signed-off-by:
-
Dick Kennedy authored
The initial implementation of NVME didn't merge with NPIV support. As such, there are several issues if NPIV is used with NVME. For now, ensure that if NVME is enabled then NPIV is not enabled. Support for NPIV with NVME will be added in the near future. Signed-off-by:
-
Dick Kennedy authored
if nvmet targetport registration fails, the driver encounters a NULL pointer oops in lpfc_hb_timeout_handler. To fix: if registration fails, ensure nvmet_support is cleared on the port structure. Also enhanced the log message on failure. Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
Dick Kennedy authored
The descriptions for lpfc_xri_split and lpfc_enable_fc4_type were poor. Revise for better understanding: lpfc_xri_split - Percentage of FCP XRI resources versus NVME lpfc_enable_fc4_type - Enable FC4 Protocol support - FCP / NVME Signed-off-by:
-
James Smart authored
Always set ctxp->state to LPFC_NVMET_STE_ABORT if ABORT op gets called Signed-off-by:
-
James Smart authored
There are several log messages that report abnormal terminations that by default are marked warn. These are typically the result of failures due to invalid controller state or abort completions. They are all natural when a controller resets. Unfortunately, as they are logged by default, it makes the admin very concerned. Convert the messages to Info. Signed-off-by:
-
Dick Kennedy authored
The driver is encountering oops in lpfc_sli_calc_ring. The driver is setting hba_wqidx for FCP based on the policy in use for NVME. The two may not be the same. Change to set the wqidx based on the FCP policy. Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
Dick Kennedy authored
Under heavy target nvme load duration, the lpfc irq handler is encountering cpu lockup warnings. Convert the driver to a shortened ISR handler which identifies the interrupting condition then schedules a workq thread to process the completion queue the interrupt was for. This moves all the real work into the workq element. As nvmet_fc upcalls are no longer in ISR context, don't set the feature flags Signed-off-by:
-
Dick Kennedy authored
Need to make ktime samples more accurate If ktime is turned on in the middle of an IO, the max calculation could be misleading. Base sampling on the start time of the IO as opposed to ktime_on. Make ISR ktime timestamps be from when CQE is read instead of EQE. Added additional sanity checks when deciding whether to accept an IO sample or not. Signed-off-by:
-
Dick Kennedy authored
Local Reject/Invalid RPI errors seen during discovery. Temporary RPI cleanup was occurring regardless of SLI rev. It's only necessary on SLI-4. Adjust the test for whether cleanup is necessary. Signed-off-by:
-
