- 17 Nov, 2014 13 commits
-
-
Avinash Patil authored
When Teardown event from FW is indicated to userspace, userspace would trigger tdls_oper handler to disable TDLS link. We need not do this explicitly here. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
RX packet descriptor structure has recently changed in FW. This patch updates rxpd accordingly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Chun-Yeow Yeoh authored
We need to assign the hw queues for mesh interface. Otherwise, we are not able to bring up the mesh interface due to the IEEE80211_INVAL_HW_QUEUE error. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
we can have here two variants. Add ATH9K_CMN_DEBUGFS y if ATH9K_CMN_DEBUGFS || ATH9K_HTC_DEBUGFS wich will add more configurations and testcases. Or remove ATH9K_HTC_DEBUGFS which need more time to be done. So, make common-spectral ignore ATH9K_DEBUGFS option for now. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
kbuild test robot authored
drivers/net/wireless/ath/ath9k/htc_drv_init.c:56:6: sparse: symbol 'ath9k_htc_op_ps_wakeup' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/htc_drv_init.c:61:6: sparse: symbol 'ath9k_htc_op_ps_restore' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/htc_drv_init.c:66:19: sparse: symbol 'ath9k_htc_ps_ops' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
kbuild test robot authored
drivers/net/wireless/ath/ath9k/init.c:91:6: sparse: symbol 'ath9k_op_ps_wakeup' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/init.c:96:6: sparse: symbol 'ath9k_op_ps_restore' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/init.c:101:19: sparse: symbol 'ath9k_ps_ops' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
This patch adds module load parameter driver_mode for mwifiex which would enable driver to create AP or P2P client interface while loading module. driver_mode is bitmap of interface modes for station, AP and P2P client. Station interface is created by default and is unaffected by driver_mode parameter. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ben Greear authored
When channel-context is not enabled, all vifs belong to the first context, but it is not configured as 'assigned'. Fix misc debugfs file to print out info for non-assigned contexts, and also print whether ctx is assigned or not. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
git://github.com/kvalo/athJohn W. Linville authored
Kalle Valo <kvalo@qca.qualcomm.com> says: "One ath6kl patch and rest for ath10k, but nothing really major which stands out. Most notable: o fix resume (Bartosz) o firmware restart is now faster and more reliable (Michal) o it's now possible to test hardware restart functionality without crashing the firmware using hw-restart parameter with simulate_fw_crash debugfs file (Michal)" Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Peter Oh authored
Fix to use v10.2 wmi call for firmware v10.2. It turned out that peer association function was using v10.1 wmi call for v10.2 firmware during code review. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Rajkumar Manoharan authored
This will enable AP mode to change channel width dynamically based on 20/40 intolerance report sent by associated client. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Rajkumar Manoharan authored
This patch would help bring up wifi interface with default board data in case of failures in otp download. It is useful for initial calibration. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Rajkumar Manoharan authored
For packet log, the transmitted frame 802.11 header alone is sufficient. Recording entire packet is also consuming lot of disk space. To optimize this, tx and rx data tracepoints are splitted into header and payload tracepoints. To record tx ieee80211 headers trace-cmd record -e ath10k_tx_hdr To record complete packets trace-cmd record -e ath10k_tx_hdr -e ath10k_tx_payload Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 11 Nov, 2014 27 commits
-
-
John W. Linville authored
Cc: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
James Cameron authored
While preparing an ad-hoc start command, the capability info bitmap is needlessly set from the command, and then the ESS bit cleared. Change to set the bitmap directly without reference to the command. Signed-off-by: James Cameron <quozl@laptop.org> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luciano Coelho authored
The wlcore_cmd_send_failsafe() function is only called in the cmd.c file, where it is definde. Make it static. Additionally, move the EXPORT_SYMBOL macro for wl1271_cmd_send() to the right place. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luciano Coelho authored
Check for the minimum required buffer length in wlcore_cmd_send() and wlcore_cmd_configure_failsafe. This ensures that we will never try to use a buffer that is smaller than the required header. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
It's been observed that wrong firmware version (ex. 66.14.96.p9 instead of 14.66.9.p96) is displayed on big endian platforms. The problem is fixed here. Reported-by: Daniel Mosquera <daniel.mosquera@ctag.com> Tested-by: Daniel Mosquera <daniel.mosquera@ctag.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
use code provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
use values provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
For some reason it didn't coused obvious problems. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
not sure why. Initially provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
and rename exports from ath9k_spectral_* to ath9k_cmn_spectral_* Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Now we should be ready to make this code common. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
last preparation before moving ath9k_spectral_scan_ to spectral.c Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
we don't have here any ieee80211_hw dependencies any way. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
we will need it to make common code Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
spectral code mostly depends on ath_hw, not on ath_softc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
this will alow us to make ath_softc independent code. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
and move rfs_chan_spec_scan to this struct. We will need it for common spectral scan code. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
We see this warning while starting mwifiex AP: Unsupported RX-STBC, default to 2x2 This was happening because of wrong offset while copying HT capabilities from BSS configuration of start_ap handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-