- 24 Feb, 2016 40 commits
-
-
Arnd Bergmann authored
The seq_mpt_print_ioc_summary function is used for the /proc/mpt/iocN/summary implementation and never gets called when CONFIG_PROC_FS is disabled: drivers/message/fusion/mptbase.c:6851:13: warning: 'seq_mpt_print_ioc_summary' defined but not used [-Wunused-function] static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) This adds an #ifdef to hide the function definition in that case and avoid the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Arnd Bergmann authored
The fdomain SCSI host driver is one of the last remaining drivers that manually search the PCI bus using pci_get_device rather than registering a pci_driver instance. This means the module device table is unused when the driver is built-in, and we get a warning about it: drivers/scsi/fdomain.c:1773:29: warning: 'fdomain_pci_tbl' defined but not used [-Wunused-variable] To avoid the warning, this adds another #ifdef around the table definition. Signed-off-by:
-
Tomas Henzl authored
A barrier should be added to ensure proper ordering of memory mapped writes. Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Kashyap Desai <kashyap.desai@broadcom.com> Acked-by:
-
Johannes Thumshirn authored
This removes a redundant code block that will either be executed if the ENABLE_FCP_RING_POLLING flag is set in phba->cfg_poll or not. The code is just duplicated in both cases, hence we unify it again. This probably is a left over from some sort of refactoring. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by:
Sebastian Herbszt <herbszt@gmx.de> Acked-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
Suganath prabu Subramani authored
Bump mpt3sas driver version from 09.102.00.00 to 12.100.00.00 Signed-off-by:
Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by:
Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by:
-
Suganath prabu Subramani authored
Track msix of each IO and use the same msix for issuing abort to timed out IO. With this driver will process IO's reply first followed by TM. Signed-off-by:
-
Suganath prabu Subramani authored
Updated MPI version and MPI header files. Signed-off-by:
-
Suganath prabu Subramani authored
Added support for configurable Chain Frame Size. Calculate the Chain Message Frame size from the IOCMaxChainSegementSize (iocfacts). Applicable only for mpt3sas/SAS3.0 HBA's. Signed-off-by:
-
Suganath Prabu Subramani authored
Module parameter to enable/disable configuring affinity hint for msix vector. SMP affinity feature can be enabled/disabled by setting module parameter "smp_affinity_enable" to 1/0. By default this feature is enabled. (smp_affinity_enable = 1 enabled). Signed-off-by:
-
Suganath prabu Subramani authored
Driver assumes HighPriority credit as part of Global credit. But, Firmware treats HighPriority credit value and global cedits as two different values. Changed host queue algorithm to treat global credits and highPriority credits as two different values. Signed-off-by:
-
Suganath prabu Subramani authored
Never block the SEP device (i.e. Never invoke the scsi_internal_device_block() API for SEP device) even for the delay not responding events. Blocking the SEP device will create a deadlock while adding any device to the OS. Signed-off-by:
-
Suganath prabu Subramani authored
1.Wrong size of argument is being passed The size of struct being passed as an argument to memset func and area of memory being pointed by an instance of struct in memset func should be of same structure type. 2.Dereference null return value 3.Array compared against '0' Check whether value pointed by particular index of an array is null or not in "if" statement. Signed-off-by:
-
Suganath prabu Subramani authored
As driver was using MPI SGL while framing the SMP Passthrough request message due to which firmware unable to post the Reply Data in the host memory and timeout is observed for this SMP Passthrough request message and so unable to perform phy disable operation. Signed-off-by:
-
Suganath prabu Subramani authored
Updated hardware description headers with MPI v2.6 and mpt3sas_pci_table[] with vendor_ids, device_ids of Cutlass and Intruder HBA which have support for 4 ports. Signed-off-by:
-
Kai Makisara authored
Change the MTMKPART operation of the MTIOCTOP ioctl so that it works also with current drives (LTO-5/6, etc.). Send a separate FORMAT MEDIUM command if the partition mode page indicates that this is required. Use LOAD to position the tape at the beginning of tape. The operation is extended so that if the argument is negative, its absolute value specifies the size of partition 0, which is the physically first partition of the tape. Signed-off-by:
Kai Mäkisara <kai.makisara@kolumbus.fi> Tested-by:
Shane M Seymour <shane.seymour@hpe.com> Tested-by:
Laurence Oberman <loberman@redhat.com> Tested-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Sumit Saxena authored
Inside compat IOCTL hook of driver, driver was using wrong address of ioc->frame.raw which leads sense_ioc_ptr to be calculated wrongly and failing IOCTL. Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by:
-
Sumit Saxena authored
Driver assumes that VFs always have peers present whenever they have same LD IDs. But this is not the case. This patch handles the above mentioned by explicitly checking for a peer before making HA/non-HA path decision. Signed-off-by:
Uday Lingala <uday.lingala@avagotech.com> Signed-off-by:
-
John Garry authored
Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by:
-
John Garry authored
Add support in v1 hw driver for ACPI. A check on whether an ACPI handle is available for the device is used to decide on whether to use ACPI reset handler or syscon for hw reset. Signed-off-by:
-
John Garry authored
The hisi_sas driver is required to support both device tree and ACPI. The scanning of the device properties now uses the Unified Device Properties API, which serves both OF and ACPI. Since syscon is not supported by ACPI, syscon is only used in the driver when device tree is used. Signed-off-by:
-
Jitendra Bhivare authored
FW got into UE after running IO stress test With kernel change to split session lock in frwd_lock and back_lock for tx and rx path correspondingly, in the IO path, common resource used in driver such as WRB was left unprotected. Add wrb_lock spinlock to protect allocation and freeing of WRB. Signed-off-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by:
-
Jitendra Bhivare authored
Processing of mgmt and IO tasks are done in process context and softirqs. Allocation and freeing of sgl_handles needs to be done under spin_lock_bh/spin_unlock_bh and move the locks to the routines. Signed-off-by:
-
Jitendra Bhivare authored
Connection resets observed from some targets when NOP-Out with wrong ExpStatSn is sent. FW keeps track of StatSn and fills up ExpStatSn accordingly. The header filled up by the stack needs to be modified by driver to clear ExpStatSn. If the field is not cleared, FW recalculates ExpStatSn and wrong offset'ed ExpStatSn is seen in the wire trace. Signed-off-by:
-
Jitendra Bhivare authored
WARN_ON(atomic_read(&mccq->used) >= mccq->len) seen when FW gets into UE. MCCQ overflow is happening because driver discards any new request and frees up the tag. The tag allocation controls the number of MCC WRB posted. It is being replenished but WRBs are not hence the WARN_ON. Allocation and freeing of WRB and tags for MCC is now done in one place. This helps to achieve proper accounting of WRB indices and MCC tags. Signed-off-by:
-
Jitendra Bhivare authored
In open with IP of unknown address family, only tag is freed and error returned. MCC WRB allocated for the operation is not freed. Added check for supported family of IP in the beginning before allocating the tag and WRB. Signed-off-by:
-
Jitendra Bhivare authored
Remove confusingly named be_mcc_compl_is_new and be_mcc_compl_use functions in processing of BMBX. Rearrange beiscsi_process_mbox_compl function. Signed-off-by:
-
Jitendra Bhivare authored
be_mcc_compl_poll waits till 'used' count of MCC WRBQ is zero. This is to determine the completion of an MCC sent. Change function to poll for the tag of MCC sent, instead, and wait till its tag_state is cleared. Signed-off-by:
-
Jitendra Bhivare authored
be_mbox_notify_wait does exactly same thing as be_mbox_notify. Signed-off-by:
-
Jitendra Bhivare authored
beiscsi_mccq_compl -> beiscsi_mccq_compl_wait - indicate blocking call. be_mcc_wait_compl -> be_mcc_compl_poll - indicate polling for completion. be_mbox_db_ready_wait -> be_mbox_db_ready_poll - indicate polling for RDY. be_mcc_compl_process -> beiscsi_process_mbox_compl - indicate BMBX compl. Signed-off-by:
-
Jitendra Bhivare authored
be_mcc_compl_process_isr is removed. MCC CQ processing is done only in beiscsi_process_mcc_cq and MCC CQE processing is done only in beiscsi_process_mcc_compl. Signed-off-by:
-
Jitendra Bhivare authored
Rename mcc_numtag to mcc_tag_status. MCC CQE status is processed using macros already defined in be_cmds.h. Add MCC_Q_WRB_ and MCC_Q_CMD_TAG_MASK macros to map to already defined CQE_STATUS_ macros to be consistent when posting MCC. Signed-off-by:
-
Jitendra Bhivare authored
mcc_cq_lock spin_lock is used only in beiscsi_process_mcc which is called only when all interrupts are disabled from mgmt_epfw_cleanup during unloading of driver. There is no other context where there can be contention for the processing of CQ. Signed-off-by:
-
Dan Carpenter authored
BFA_MFG_NAME is "QLogic" which is only 7 bytes, but we are copying 8 bytes. It's harmless because the badding byte is likely zero but it makes static checkers complain. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Anil Gurumurthy <anil.gurumurthy@qlogic.com> Signed-off-by:
-
Maurizio Lombardi authored
The pd_seq_sync pointer can't be NULL, we have to check its entries instead. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by:
-
Raghava Aditya Renukunta authored
Updated diver version to 41052 Signed-off-by:
Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com> Reviewed-by:
-
Raghava Aditya Renukunta authored
During EEH PCI hotplug activity kernel unloads and loads the driver, causing character device to be unregistered(aac_remove_one).When the driver is loaded back using aac_probe_one the character device needs to be registered again for the AIF management tools to work. Fixed by adding code to register character device in aac_probe_one if it is unregistered in aac_remove_one. Signed-off-by:
-
Raghava Aditya Renukunta authored
while driver removal is in progress or PCI shutdown is invoked, driver kills AIF aacraid thread, but IOCTL requests from the management tools re-start AIF thread leading to IOP_RESET. Fixed by setting adapter_shutdown flag when PCI shutdown is invoked. Signed-off-by:
-
Raghava Aditya Renukunta authored
aac_mutex was used to create protect the ioctl path for only the compat path, it would be make more sense to place mutex in aac_do_ioctl, which is the main ioctl function call that handles all ioctl commands. Created new mutex ioctl_mutex in struct aac_dev to protect switch case in aac_do_ioctl and removed aac_mutex from aac_cfg_ioctl and aac_compat_do_ioctl Signed-off-by:
-
Raghava Aditya Renukunta authored
Series 7 does not support PCI hot reset used by EEH. Enabled fundamental reset only for Series 7 Signed-off-by:
-
Raghava Aditya Renukunta authored
During EEH recovery number of online CPU's might change thereby changing the number of MSIx vectors. Since each fib is allocated to a vector, changes in the number of vectors causes fib to be sent thru invalid vectors.In addition the correct number of MSIx vectors is not updated in the INIT struct sent to the controller, when it is reinitialized. Fixed by reassigning vectors to fibs based on the updated number of MSIx vectors and updating the INIT structure before sending to controller. Fixes: MSI-X vector calculation for suspend/resume Cc: stable@vger.kernel.org Signed-off-by:
Johannes Thumshirn <jthushirn@suse.de> Signed-off-by:
-
