- 01 Oct, 2019 38 commits
-
-
Himanshu Madhani authored
[ Upstream commit ef801f07 ] This patch fixes commit bcc71cc3 ("scsi: qla2xxx: Fix for double free of SRB structure") which placed code in wrong routines. Also updated the use of WARN_ON() to WARN_ON_ONCE() to prevent flooding log messages. Fixes: bcc71cc3 ("scsi: qla2xxx: Fix for double free of SRB structure") Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Quinn Tran authored
[ Upstream commit 9ba1cb25 ] When all fabric scan retries fail, remove all RPorts, DMA resources for the command. Otherwise we have stale Rports. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Quinn Tran authored
[ Upstream commit e112761a ] Turn off IOCB timeout timer on IOCB completion instead of turning it off in a deferred task. This prevent false alarm if the deferred task is stalled out. Signed-off-by:
-
Waiman Long authored
[ Upstream commit 71492580 ] Tetsuo Handa had reported he saw an incorrect "downgrading a read lock" warning right after a previous lockdep warning. It is likely that the previous warning turned off lock debugging causing the lockdep to have inconsistency states leading to the lock downgrade warning. Fix that by add a check for debug_locks at the beginning of __lock_downgrade(). Debugged-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/1547093005-26085-1-git-send-email-longman@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Lechner authored
[ Upstream commit 87a2b65f ] This adds rate limiting to the message that is printed when reading a power supply property via sysfs returns an error. This will prevent userspace applications from unintentionally dDOSing the system by continuously reading a property that returns an error. Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 957063c9 ] Clang warns when one enumerated type is implicitly converted to another: drivers/pinctrl/sprd/pinctrl-sprd.c:845:19: warning: implicit conversion from enumeration type 'enum sprd_pinconf_params' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"sprd,control", SPRD_PIN_CONFIG_CONTROL, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/sprd/pinctrl-sprd.c:846:22: warning: implicit conversion from enumeration type 'enum sprd_pinconf_params' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"sprd,sleep-mode", SPRD_PIN_CONFIG_SLEEP_MODE, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~ It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/138Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Josh Poimboeuf authored
commit f73b3cc3 upstream. If the build user has the CFLAGS variable set in their environment, objtool blindly appends to it, which can cause unexpected behavior. Clobber CFLAGS to ensure consistent objtool compilation behavior. Reported-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Tested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.comSigned-off-by:
-
Takashi Iwai authored
commit d2c63b7d upstream. It's reported that the garbled sound on HP Envy x360 13z-ag000 (Ryzen Laptop) is fixed by the same workaround applied to other AMD chips. Update the driver_data entry for Raven (1022:15e3) to use the newly introduced preset, AZX_DCAPS_PRESET_AMD_SB. Since it already contains AZX_DCAPS_PM_RUNTIME, we can drop that bit, too. Reported-and-tested-by:
Dennis Padiernos <depadiernos@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190920073040.31764-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Shih-Yuan Lee (FourDollars) authored
commit 7b485d17 upstream. The same fixup to enable laptop imic is needed for ASUS M9V with AD1986A codec like another HP machine. Signed-off-by:
Shih-Yuan Lee (FourDollars) <fourdollars@debian.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190920134052.GA8035@localhostSigned-off-by:
-
Takashi Sakamoto authored
commit 3a9236e9 upstream. At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data channels per data block in CIP. Both iO14 and iO26 have the same contents in their configuration ROM. For this reason, ALSA Dice driver attempts to distinguish them according to the value of TX0_AUDIO register at probe callback. Although the way is valid at lower and middle sampling rate, it's lastly invalid at higher sampling rate because because the two models returns the same value for read transaction to the register. In the most cases, users just plug-in the device and ALSA dice driver detects it. In the case, the device runs at lower sampling rate and the driver detects expectedly. For this reason, this commit leaves the way to detect as is. Fixes: 28b208f6 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20190916101851.30409-1-o-takashi@sakamocchi.jpSigned-off-by:
-
Jussi Laako authored
commit f41f9005 upstream. EVGA NU Audio is actually a USB audio device on a PCIexpress card, with it's own USB controller. It supports both PCM and DSD. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190924071143.30911-1-jussi@sonarnerd.netSigned-off-by:
-
Ilya Pshonkin authored
commit 029d2c0f upstream. This patch adds quirk VID ID for Hiby portable players family with native DSD playback support. Signed-off-by:
Ilya Pshonkin <sudokamikaze@protonmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190917074937.157802-1-ilya.pshonkin@netforce.uaSigned-off-by:
-
Takashi Iwai authored
commit 2757970f upstream. The node obtained from of_find_node_by_path() has to be unreferenced after the use, but we forgot it for the root node. Fixes: f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support") Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 4bcdec39 upstream. Users have been seeing sound stability issues with max98090 codecs since: commit 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") At first that commit broke sound for Chromebook Swanky and Clapper models, the problem was that the machine-driver has been controlling the wrong clock on those models since support for them was added. This was hidden by clk-pmc-atom.c keeping the actual clk on unconditionally. With the machine-driver controlling the proper clock, sound works again but we are seeing bug reports describing it as: low volume, "sounds like played at 10x speed" and instable. When these issues are hit the following message is seen in dmesg: "max98090 i2c-193C9890:00: PLL unlocked". Attempts have been made to fix this by inserting a delay between enabling the clk and enabling and checking the pll, but this has not helped. It seems that at least on boards which use pmc_plt_clk_0 as clock, if we ever disable the clk, the pll looses its lock and after that we get various issues. This commit fixes this by enabling the clock once at probe time on these boards. In essence this restores the old behavior of clk-pmc-atom.c always keeping the clk on on these boards. Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reported-by:
Mogens Jensen <mogens-jensen@protonmail.com> Reported-by:
Dean Wallace <duffydack73@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Marco Felsch authored
commit 2d29bcc8 upstream. The function only consists of a single switch case block without a default case. Unsupported control requests are indicated by the -EINVAL return code trough the last return statement at the end of the function. So exiting just the switch case block returns the -EINVAL error code but the hue control is supported and a zero should be returned instead. Replace the break by a 'return 0' to fix this behaviour. Fixes: d183e4ef ("[media] v4l: tvp5150: Add missing break in set control handler") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Naftali Goldstein authored
commit 2859de76 upstream. As with the non-offloaded rs case, during assoc on the ap side the phy context is set to 20MHz until authorization of a client that supports wider channel-widths. Support this by sending the initial tlc_config_cmd with max supported channel width of 20MHz until authorization succeeds. Fixes: 6b7a5aea ("iwlwifi: mvm: always init rs with 20mhz bandwidth rates") Signed-off-by:
Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 65c3b582 upstream. Probe responses were sent to the multicast station while they should be routed to the broadcast station. This has no negative effect since the frame was still routed to the right queue, but it looked very fishy to send a frame to a (queue, station) tuple where 'queue' is not mapped to 'station'. Fixes: 7c305de2 ("iwlwifi: mvm: Direct multicast frames to the correct station") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 0318a7b7 ] In the two places is_last_ethertype_ip is being called, the caller will be looking inside the ip header, to be safe, add ip{4,6} header sanity check. And return true only on valid ip headers, i.e: the whole header is contained in the linear part of the skb. Note: Such situation is very rare and hard to reproduce, since mlx5e allocates a large enough headroom to contain the largest header one can imagine. Fixes: fe1dc069 ("net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets") Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 0aa1d186 ] When an ethernet frame with ip payload is padded, the padding octets are not covered by the hardware checksum. Prior to the cited commit, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, the kernel will try to trim the padding bytes and subtract their checksum from skb->csum. In this patch we fixup skb->csum for any ip packet with tail padding of any size, if any padding found. FCS case is just one special case of this general purpose patch, hence, it is removed. Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), Cc: Eric Dumazet <edumazet@google.com> Reviewed-by:
-
Saeed Mahameed authored
[ Upstream commit 5d0bb3ba ] XDP programs might change packets data contents which will make the reported skb checksum (checksum complete) invalid. When XDP programs are loaded/unloaded set/clear rx RQs MLX5E_RQ_STATE_NO_CSUM_COMPLETE flag. Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support") Reviewed-by:
-
Or Gerlitz authored
[ Upstream commit b856df28 ] Currently we practically never report checksum unnecessary, because for all IP packets we take the checksum complete path. Enable non-default runs with reprorting checksum unnecessary, using an ethtool private flag. This can be useful for performance evals and other explorations. Required by downstream patch which fixes XDP checksum. Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
-
Cong Wang authored
[ Upstream commit ef6fcd45 ] IP header is not necessarily located right after struct ethhdr, there could be multiple 802.1Q headers in between, this is why we call __vlan_get_protocol(). Fixes: fe1dc069 ("net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets") Cc: Alaa Hleihel <alaa@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alaa Hleihel authored
[ Upstream commit fe1dc069 ] CHECKSUM_COMPLETE is not applicable to SCTP protocol. Setting it for SCTP packets leads to CRC32c validation failure. Fixes: bbceefce ("net/mlx5e: Support RX CHECKSUM_COMPLETE") Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Reviewed-by:
-
Natali Shechtman authored
[ Upstream commit f007c13d ] In multi-host (MH) NIC scheme, a single HW port serves multiple hosts or sockets on the same host. The HW uses a mechanism in the PCIe buffer which monitors the amount of consumed PCIe buffers per host. On a certain configuration, under congestion, the HW emulates a switch doing ECN marking on packets using ECN indication on the completion descriptor (CQE). The driver needs to set the ECN bits on the packet SKB, such that the network stack can react on that, this commit does that. Needed by downstream patch which fixes a mlx5 checksum issue. Fixes: bbceefce ("net/mlx5e: Support RX CHECKSUM_COMPLETE") Signed-off-by:
Natali Shechtman <natali@mellanox.com> Reviewed-by:
-
Aurelien Aptel authored
commit 7e5a70ad upstream. Prevent deadlock between open_shroot() and cifs_mark_open_files_invalid() by releasing the lock before entering SMB2_open, taking it again after and checking if we still need to use the result. Link: https://lore.kernel.org/linux-cifs/684ed01c-cbca-2716-bc28-b0a59a0f8521@prodrive-technologies.com/T/#u Fixes: 3d4ef9a1 ("smb3: fix redundant opens on root") Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 5fc194ea upstream. Add missing break statement in order to prevent the code from falling through to case CRYPTO_ALG_TYPE_AHASH. Fixes: aeb4c132 ("crypto: talitos - Convert to new AEAD interface") Cc: stable@vger.kernel.org Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tokunori Ikegami authored
commit 37c673ad upstream. As reported by the OpenWRT team, write requests sometimes fail on some platforms. Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet. Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bf ("[MTD] CFI-0002 - Improve error checking"). But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command. By using chip_good() to check the state to be done it can be reduced the retry with reset. It is depended on the actual flash chip behavior so the root cause is unknown. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Reported-by:
Fabio Bettoni <fbettoni@gmail.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Fix a checkpatch warning] Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Sebastian Parschauer authored
commit 2acf40f0 upstream. The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. Ville Viinikka (viinikv) reported and tested the quirk. Link: https://github.com/sriemer/fix-linux-mouse issue 15 Signed-off-by:
Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org # v4.16+ Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Alan Stern authored
commit 416dacb8 upstream. The syzbot fuzzer has reported a pair of problems in the hidraw_ioctl() function: slab-out-of-bounds read and use-after-free read. An example of the first: BUG: KASAN: slab-out-of-bounds in strlen+0x79/0x90 lib/string.c:525 Read of size 1 at addr ffff8881c8035f38 by task syz-executor.4/2833 CPU: 1 PID: 2833 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 strlen+0x79/0x90 lib/string.c:525 strlen include/linux/string.h:281 [inline] hidraw_ioctl+0x245/0xae0 drivers/hid/hidraw.c:446 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd2d/0x1330 fs/ioctl.c:696 ksys_ioctl+0x9b/0xc0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718 do_syscall_64+0xb7/0x580 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7a68f6dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000080404805 RDI: 0000000000000004 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a68f6e6d4 R13: 00000000004c21de R14: 00000000004d5620 R15: 00000000ffffffff The two problems have the same cause: hidraw_ioctl() fails to test whether the device has been removed. This patch adds the missing test. Reported-and-tested-by: syzbot+5a6c4ec678a0c6ee84ba@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alan Stern authored
commit 5f924277 upstream. The syzbot fuzzer found a general protection fault in the HID subsystem: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 3715 Comm: syz-executor.3 Not tainted 5.2.0-rc6+ #15 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__pm_runtime_resume+0x49/0x180 drivers/base/power/runtime.c:1069 Code: ed 74 d5 fe 45 85 ed 0f 85 9a 00 00 00 e8 6f 73 d5 fe 48 8d bd c1 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 fe 00 00 00 RSP: 0018:ffff8881d99d78e0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000020 RCX: ffffc90003f3f000 RDX: 0000000416d8686d RSI: ffffffff82676841 RDI: 00000020b6c3436a RBP: 00000020b6c340a9 R08: ffff8881c6d64800 R09: fffffbfff0e84c25 R10: ffff8881d99d7940 R11: ffffffff87426127 R12: 0000000000000004 R13: 0000000000000000 R14: ffff8881d9b94000 R15: ffffffff897f9048 FS: 00007f047f542700(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30f21000 CR3: 00000001ca032000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: pm_runtime_get_sync include/linux/pm_runtime.h:226 [inline] usb_autopm_get_interface+0x1b/0x50 drivers/usb/core/driver.c:1707 usbhid_power+0x7c/0xe0 drivers/hid/usbhid/hid-core.c:1234 hid_hw_power include/linux/hid.h:1038 [inline] hidraw_open+0x20d/0x740 drivers/hid/hidraw.c:282 chrdev_open+0x219/0x5c0 fs/char_dev.c:413 do_dentry_open+0x497/0x1040 fs/open.c:778 do_last fs/namei.c:3416 [inline] path_openat+0x1430/0x3ff0 fs/namei.c:3533 do_filp_open+0x1a1/0x280 fs/namei.c:3563 do_sys_open+0x3c0/0x580 fs/open.c:1070 do_syscall_64+0xb7/0x560 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe It turns out the fault was caused by a bug in the HID Logitech driver, which violates the requirement that every pathway calling hid_hw_start() must also call hid_hw_stop(). This patch fixes the bug by making sure the requirement is met. Reported-and-tested-by: syzbot+3cbe5cd105d2ad56a1df@syzkaller.appspotmail.com Signed-off-by:
-
Roderick Colenbrander authored
commit 2bcdacb7 upstream. The sony driver is not properly cleaning up from potential failures in sony_input_configured. Currently it calls hid_hw_stop, while hid_connect is still running. This is not a good idea, instead hid_hw_stop should be moved to sony_probe. Similar changes were recently made to Logitech drivers, which were also doing improper cleanup. Signed-off-by:
Roderick Colenbrander <roderick.colenbrander@sony.com> CC: stable@vger.kernel.org Signed-off-by:
-
Alan Stern authored
commit 98375b86 upstream. The syzbot fuzzer provoked a general protection fault in the hid-prodikeys driver: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300 [inline] RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline] RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline] RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836 Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc 48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b The problem is caused by the fact that pcmidi_get_output_report() will return an error if the HID device doesn't provide the right sort of output report, but pcmidi_set_operational() doesn't bother to check the return code and assumes the function call always succeeds. This patch adds the missing check and aborts the probe operation if necessary. Reported-and-tested-by: syzbot+1088533649dafa1c9004@syzkaller.appspotmail.com Signed-off-by:
-
Jack Morgenstein authored
commit f794809a upstream. The upstream kernel commit cited below modified the workqueue in the new CQ API to be bound to a specific CPU (instead of being unbound). This caused ALL users of the new CQ API to use the same bound WQ. Specifically, MAD handling was severely delayed when the CPU bound to the WQ was busy handling (higher priority) interrupts. This caused a delay in the MAD "heartbeat" response handling, which resulted in ports being incorrectly classified as "down". To fix this, add a new "unbound" WQ type to the new CQ API, so that users have the option to choose either a bound WQ or an unbound WQ. For MADs, choose the new "unbound" WQ. Fixes: b7363e67 ("IB/device: Convert ib-comp-wq to be CPU-bound") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.m> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Nick Desaulniers authored
[ Upstream commit 0f0727d9 ] arch/x86/Makefile disables SSE and SSE2 for the whole kernel. The AMDGPU drivers modified in this patch re-enable SSE but not SSE2. Turn on SSE2 to support emitting double precision floating point instructions rather than calls to non-existent (usually available from gcc_s or compiler_rt) floating point helper routines for Clang. This was originally landed in: commit 10117450 ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines") but reverted in: commit 193392ed ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"") due to bugreports from GCC builds. Add guards to only do so for Clang. Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487 Link: https://github.com/ClangBuiltLinux/linux/issues/327Suggested-by:
Sedat Dilek <sedat.dilek@gmail.com> Suggested-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Greg Kurz authored
commit 6ccb4ac2 upstream. There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call to return the 32-bit value 0xffffffff when OPAL has run out of IRQs. Unfortunatelty, OPAL return values are signed 64-bit entities and errors are supposed to be negative. If that happens, the linux code confusingly treats 0xffffffff as a valid IRQ number and panics at some point. A fix was recently merged in skiboot: e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()") but we need a workaround anyway to support older skiboots already in the field. Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error returned upon resource exhaustion. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Greg Kurz <groug@kaod.org> Reviewed-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821713818.1985334.14123187368108582810.stgit@bahia.lan (groug: fix arch/powerpc/platforms/powernv/opal-wrappers.S instead of non-existing arch/powerpc/platforms/powernv/opal-call.c) Signed-off-by:
-
Leon Romanovsky authored
commit fe9bc164 upstream. Nullify the resource task struct pointer to ensure that subsequent calls won't try to release task_struct again. ------------[ cut here ]------------ ODEBUG: free active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 0 PID: 6048 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 6048 Comm: syz-executor022 Not tainted 4.19.0-rc7-next-20181008+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x3ab lib/dump_stack.c:113 panic+0x238/0x4e7 kernel/panic.c:184 __warn.cold.8+0x163/0x1ba kernel/panic.c:536 report_bug+0x254/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969 RIP: 0010:debug_print_object+0x16a/0x210 lib/debugobjects.c:326 Code: 41 88 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 92 00 00 00 48 8b 14 dd 60 02 41 88 4c 89 fe 48 c7 c7 00 f8 40 88 e8 36 2f b4 fd <0f> 0b 83 05 a9 f4 5e 06 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f RSP: 0018:ffff8801d8c3eda8 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8164d235 RDI: 0000000000000005 RBP: ffff8801d8c3ede8 R08: ffff8801d70aa280 R09: ffffed003b5c3eda R10: ffffed003b5c3eda R11: ffff8801dae1f6d7 R12: 0000000000000001 R13: ffffffff8939a760 R14: 0000000000000000 R15: ffffffff8840fca0 __debug_check_no_obj_freed lib/debugobjects.c:786 [inline] debug_check_no_obj_freed+0x3ae/0x58d lib/debugobjects.c:818 kmem_cache_free+0x202/0x290 mm/slab.c:3759 free_task_struct kernel/fork.c:163 [inline] free_task+0x16e/0x1f0 kernel/fork.c:457 __put_task_struct+0x2e6/0x620 kernel/fork.c:730 put_task_struct include/linux/sched/task.h:96 [inline] finish_task_switch+0x66c/0x900 kernel/sched/core.c:2715 context_switch kernel/sched/core.c:2834 [inline] __schedule+0x8d7/0x21d0 kernel/sched/core.c:3480 schedule+0xfe/0x460 kernel/sched/core.c:3524 freezable_schedule include/linux/freezer.h:172 [inline] futex_wait_queue_me+0x3f9/0x840 kernel/futex.c:2530 futex_wait+0x45c/0xa50 kernel/futex.c:2645 do_futex+0x31a/0x26d0 kernel/futex.c:3528 __do_sys_futex kernel/futex.c:3589 [inline] __se_sys_futex kernel/futex.c:3557 [inline] __x64_sys_futex+0x472/0x6a0 kernel/futex.c:3557 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446549 Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a998f5da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: ffffffffffffffda RBX: 00000000006dbc38 RCX: 0000000000446549 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006dbc38 RBP: 00000000006dbc30 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc3c R13: 2f646e6162696e69 R14: 666e692f7665642f R15: 00000000006dbd2c Kernel Offset: disabled Reported-by: syzbot+71aff6ea121ffefc280f@syzkaller.appspotmail.com Fixes: ed7a01fd ("RDMA/restrack: Release task struct which was hold by CM_ID object") Signed-off-by:
-
Juliet Kim authored
[ Upstream commit 1c2977c0 ] Commit 36f1031c ("ibmvnic: Do not process reset during or after device removal") made the change to exit reset if the driver has been removed, but does not free reset work items of the adapter from queue. Ensure all reset work items are freed when breaking out of the loop early. Fixes: 36f1031c ("ibmnvic: Do not process reset during or after device removal”) Signed-off-by:
Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by:
-
Marcel Holtmann authored
[ Upstream commit 68d19d7d ] This reverts commit c49a8682. There are devices which require low connection intervals for usable operation including keyboards and mice. Forcing a static connection interval for these types of devices has an impact in latency and causes a regression. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
- 21 Sep, 2019 2 commits
-
-
Greg Kroah-Hartman authored
-
Sean Young authored
commit 0c4df39e upstream. Ensure we do not access the buffer beyond the end if no 0xff byte is encountered. Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com Signed-off-by:
Sean Young <sean@mess.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
