- 03 Nov, 2014 1 commit
-
-
Johannes Weiner authored
commit abe5f972 upstream. The zone allocation batches can easily underflow due to higher-order allocations or spills to remote nodes. On SMP that's fine, because underflows are expected from concurrency and dealt with by returning 0. But on UP, zone_page_state will just return a wrapped unsigned long, which will get past the <= 0 check and then consider the zone eligible until its watermarks are hit. Commit 3a025760 ("mm: page_alloc: spill to remote nodes before waking kswapd") already made the counter-resetting use atomic_long_read() to accomodate underflows from remote spills, but it didn't go all the way with it. Make it clear that these batches are expected to go negative regardless of concurrency, and use atomic_long_read() everywhere. Fixes: 81c0a2bb ("mm: page_alloc: fair zone allocator policy") Reported-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
- 31 Oct, 2014 39 commits
-
-
Jiri Slaby authored
-
Jan Kara authored
commit 7ba3ec57 upstream. Commit 8e3dffc6 "Ext2: mark inode dirty after the function dquot_free_block_nodirty is called" unveiled a bug in __ext2_get_block() called from ext2_get_xip_mem(). That function called ext2_get_block() mistakenly asking it to map 0 blocks while 1 was intended. Before the above mentioned commit things worked out fine by luck but after that commit we started returning that we allocated 0 blocks while we in fact allocated 1 block and thus allocation was looping until all blocks in the filesystem were exhausted. Fix the problem by properly asking for one block and also add assertion in ext2_get_blocks() to catch similar problems. Reported-and-tested-by:
Andiry Xu <andiry.xu@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Johannes Weiner authored
commit 2f7dd7a4 upstream. The cgroup iterators yield css objects that have not yet gone through css_online(), but they are not complete memcgs at this point and so the memcg iterators should not return them. Commit d8ad3055 ("mm/memcg: iteration skip memcgs not yet fully initialized") set out to implement exactly this, but it uses CSS_ONLINE, a cgroup-internal flag that does not meet the ordering requirements for memcg, and so the iterator may skip over initialized groups, or return partially initialized memcgs. The cgroup core can not reasonably provide a clear answer on whether the object around the css has been fully initialized, as that depends on controller-specific locking and lifetime rules. Thus, introduce a memcg-specific flag that is set after the memcg has been initialized in css_online(), and read before mem_cgroup_iter() callers access the memcg members. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Michael Ellerman authored
commit 78e05b14 upstream. Similar to the previous commit which described why we need to add a barrier to arch_spin_is_locked(), we have a similar problem with spin_unlock_wait(). We need a barrier on entry to ensure any spinlock we have previously taken is visibly locked prior to the load of lock->slock. It's also not clear if spin_unlock_wait() is intended to have ACQUIRE semantics. For now be conservative and add a barrier on exit to give it ACQUIRE semantics. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Michael Ellerman authored
commit 51d7d520 upstream. The kernel defines the function spin_is_locked(), which can be used to check if a spinlock is currently locked. Using spin_is_locked() on a lock you don't hold is obviously racy. That is, even though you may observe that the lock is unlocked, it may become locked at any time. There is (at least) one exception to that, which is if two locks are used as a pair, and the holder of each checks the status of the other before doing any update. Assuming *A and *B are two locks, and *COUNTER is a shared non-atomic value: The first CPU does: spin_lock(*A) if spin_is_locked(*B) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*A) And the second CPU does: spin_lock(*B) if spin_is_locked(*A) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*B) Although this is a strange locking construct, it should work. It seems to be understood, but not documented, that spin_is_locked() is not a memory barrier, so in the examples above and below the caller inserts its own memory barrier before acting on the result of spin_is_locked(). For now we assume spin_is_locked() is implemented as below, and we break it out in our examples: bool spin_is_locked(*LOCK) { LOAD l = *LOCK return l.locked } Our intuition is that there should be no problem even if the two code sequences run simultaneously such as: CPU 0 CPU 1 ================================================== spin_lock(*A) spin_lock(*B) LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) If one CPU gets the lock before the other then it will do the update and the other CPU will back off: CPU 0 CPU 1 ================================================== spin_lock(*A) LOAD b = *B spin_lock(*B) if b.locked # false LOAD a = *A else if a.locked # true smp_mb() # nothing LOAD r1 = *COUNTER spin_unlock(*B) r1++ STORE *COUNTER = r1 spin_unlock(*A) However in reality spin_lock() itself is not indivisible. On powerpc we implement it as a load-and-reserve and store-conditional. Ignoring the retry logic for the lost reservation case, it boils down to: spin_lock(*LOCK) { LOAD l = *LOCK l.locked = true STORE *LOCK = l ACQUIRE_BARRIER } The ACQUIRE_BARRIER is required to give spin_lock() ACQUIRE semantics as defined in memory-barriers.txt: This acts as a one-way permeable barrier. It guarantees that all memory operations after the ACQUIRE operation will appear to happen after the ACQUIRE operation with respect to the other components of the system. On modern powerpc systems we use lwsync for ACQUIRE_BARRIER. lwsync is also know as "lightweight sync", or "sync 1". As described in Power ISA v2.07 section B.2.1.1, in this scenario the lwsync is not the barrier itself. It instead causes the LOAD of *LOCK to act as the barrier, preventing any loads or stores in the locked region from occurring prior to the load of *LOCK. Whether this behaviour is in accordance with the definition of ACQUIRE semantics in memory-barriers.txt is open to discussion, we may switch to a different barrier in future. What this means in practice is that the following can occur: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true LOAD b = *B LOAD a = *A STORE *A = a STORE *B = b if b.locked # false if a.locked # false else else smp_mb() smp_mb() LOAD r1 = *COUNTER LOAD r2 = *COUNTER r1++ r2++ STORE *COUNTER = r1 STORE *COUNTER = r2 # Lost update spin_unlock(*A) spin_unlock(*B) That is, the load of *B can occur prior to the store that makes *A visibly locked. And similarly for CPU 1. The result is both CPUs hold their lock and believe the other lock is unlocked. The easiest fix for this is to add a full memory barrier to the start of spin_is_locked(), so adding to our previous definition would give us: bool spin_is_locked(*LOCK) { smp_mb() LOAD l = *LOCK return l.locked } The new barrier orders the store to the lock we are locking vs the load of the other lock: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true STORE *A = a STORE *B = b smp_mb() smp_mb() LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) Although the above example is theoretical, there is code similar to this example in sem_lock() in ipc/sem.c. This commit in addition to the next commit appears to be a fix for crashes we are seeing in that code where we believe this race happens in practice. Signed-off-by:
-
Ilya Dryomov authored
commit f9865f06 upstream. Commit f363e45f ("net/ceph: make ceph_msgr_wq non-reentrant") effectively removed WQ_MEM_RECLAIM flag from ceph_msgr_wq. This is wrong - libceph is very much a memory reclaim path, so restore it. Cc: stable@vger.kernel.org # needs backporting for < 3.12 Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Tested-by:
Micha Krause <micha@krausam.de> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ezequiel Garcia authored
commit b478e336 upstream. The current error path calls tilcdc_unload() in case of an error to release the resources. However, this is wrong because not all resources have been allocated by the time an error occurs in tilcdc_load(). To fix it, this commit adds proper labels to bail out at the different stages in the load function, and release only the resources actually allocated. Tested-by:
Darren Etheridge <detheridge@ti.com> Tested-by:
Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Shen Guang authored
commit 08d1dec6 upstream. When we are doing compliance test with xHCI, we found that if we enable CONFIG_USB_SUSPEND and plug in a bad device which causes over-current condition to the root port, software will not be noticed. The reason is that current code don't set hub->change_bits in hub_activate() when over-current happens, and then hub_events() will not check the port status because it thinks nothing changed. If CONFIG_USB_SUSPEND is disabled, the interrupt pipe of the hub will report the change and set hub->event_bits, and then hub_events() will check what events happened.In this case over-current can be detected. Signed-off-by:
Shen Guang <shenguang10@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Pawel Moll authored
commit b3f20785 upstream. When running a 32-bit userspace on a 64-bit kernel (eg. i386 application on x86_64 kernel or 32-bit arm userspace on arm64 kernel) some of the perf ioctls must be treated with special care, as they have a pointer size encoded in the command. For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded as 0x80042407, but 64-bit kernel will expect 0x80082407. In result the ioctl will fail returning -ENOTTY. This patch solves the problem by adding code fixing up the size as compat_ioctl file operation. Reported-by:
Drew Richardson <drew.richardson@arm.com> Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Vince Weaver authored
commit 1996388e upstream. This was discussed back in February: https://lkml.org/lkml/2014/2/18/956 But I never saw a patch come out of it. On IvyBridge we share the SandyBridge cache event tables, but the dTLB-load-miss event is not compatible. Patch it up after the fact to the proper DTLB_LOAD_MISSES.DEMAND_LD_MISS_CAUSES_A_WALK Signed-off-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
-
Dave Chinner authored
commit 0d085a52 upstream. XFS has been having trouble with stray delayed allocation extents beyond EOF for a long time. Recent changes to the collapse range code has triggered erroneous EBUSY errors on page invalidtion for block size smaller than page size filesystems. These have been caused by dirty buffers beyond EOF on a partial page which do not get written to disk during a sync. The issue is that write-ahead in xfs_cluster_write() finds such a partial page and handles it by leaving the page dirty but pushing it into a writeback state. This used to work just fine, as the write_cache_pages() code would then find the dirty partial page in the next mapping tree lookup as the dirty tag is still set. Unfortunately, when we moved to a mark and sweep approach to writeback to fix other writeback sync issues, we broken this. THe act of marking the page as under writeback now clears the TOWRITE tag in the radix tree, even though the page is still dirty. This causes the TOWRITE tag to be cleared, and hence the next lookup on the mapping tree does not find the dirty partial page and so doesn't try to write it again. This same writeback bug was found recently in ext4 and fixed in commit 1c8349a1 ("ext4: fix data integrity sync in ordered mode") without communication to the wider filesystem community. We can use exactly the same fix here so the TOWRITE flag is not cleared on partial page writes. cc: stable@vger.kernel.org # dependent on 1c8349a1Root-cause-found-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Chao Yu authored
commit 35425ea2 upstream. Christopher Head 2014-06-28 05:26:20 UTC described: "I tried to reproduce this on 3.12.21. Instead, when I do "echo hello > foo" in an ecryptfs mount with ecryptfs_xattr specified, I get a kernel crash: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61 PGD d7840067 PUD b2c3c067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: nvidia(PO) CPU: 3 PID: 3566 Comm: bash Tainted: P O 3.12.21-gentoo-r1 #2 Hardware name: ASUSTek Computer Inc. G60JX/G60JX, BIOS 206 03/15/2010 task: ffff8801948944c0 ti: ffff8800bad70000 task.ti: ffff8800bad70000 RIP: 0010:[<ffffffff8110eb39>] [<ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61 RSP: 0018:ffff8800bad71c10 EFLAGS: 00010246 RAX: 00000000000181a4 RBX: ffff880198648480 RCX: 0000000000000000 RDX: 0000000000000004 RSI: ffff880172010450 RDI: 0000000000000000 RBP: ffff880198490e40 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880172010450 R11: ffffea0002c51e80 R12: 0000000000002000 R13: 000000000000001a R14: 0000000000000000 R15: ffff880198490e40 FS: 00007ff224caa700(0000) GS:ffff88019fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000bb07f000 CR4: 00000000000007e0 Stack: ffffffff811826e8 ffff8800a39d8000 0000000000000000 000000000000001a ffff8800a01d0000 ffff8800a39d8000 ffffffff81185fd5 ffffffff81082c2c 00000001a39d8000 53d0abbc98490e40 0000000000000037 ffff8800a39d8220 Call Trace: [<ffffffff811826e8>] ? ecryptfs_setxattr+0x40/0x52 [<ffffffff81185fd5>] ? ecryptfs_write_metadata+0x1b3/0x223 [<ffffffff81082c2c>] ? should_resched+0x5/0x23 [<ffffffff8118322b>] ? ecryptfs_initialize_file+0xaf/0xd4 [<ffffffff81183344>] ? ecryptfs_create+0xf4/0x142 [<ffffffff810f8c0d>] ? vfs_create+0x48/0x71 [<ffffffff810f9c86>] ? do_last.isra.68+0x559/0x952 [<ffffffff810f7ce7>] ? link_path_walk+0xbd/0x458 [<ffffffff810fa2a3>] ? path_openat+0x224/0x472 [<ffffffff810fa7bd>] ? do_filp_open+0x2b/0x6f [<ffffffff81103606>] ? __alloc_fd+0xd6/0xe7 [<ffffffff810ee6ab>] ? do_sys_open+0x65/0xe9 [<ffffffff8157d022>] ? system_call_fastpath+0x16/0x1b RIP [<ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61 RSP <ffff8800bad71c10> CR2: 0000000000000000 ---[ end trace df9dba5f1ddb8565 ]---" If we create a file when we mount with ecryptfs_xattr_metadata option, we will encounter a crash in this path: ->ecryptfs_create ->ecryptfs_initialize_file ->ecryptfs_write_metadata ->ecryptfs_write_metadata_to_xattr ->ecryptfs_setxattr ->fsstack_copy_attr_all It's because our dentry->d_inode used in fsstack_copy_attr_all is NULL, and it will be initialized when ecryptfs_initialize_file finish. So we should skip copying attr from lower inode when the value of ->d_inode is invalid. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Ludovic Desroches authored
commit cfa1950e upstream. When introducing support for sama5d3, the write to PMC_PCDR register has been accidentally removed. Reported-by:
Nathalie Cyrille <nathalie.cyrille@atmel.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Andreas Henriksson authored
commit b65e0fb3 upstream. As discovered on a custom board similar to at91sam9263ek and basing its devicetree on that one apparently the pin muxing doesn't get set up properly. This was discovered since the custom boards u-boot does funky stuff with the pin muxing and leaved it set to SPI which made the MMC driver not work under Linux. The fix is simply to define the given configuration as the default. This probably worked by pure luck before, but it's better to make the muxing explicitly set. Signed-off-by:
Andreas Henriksson <andreas.henriksson@endian.se> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Anssi Hannula authored
commit 6acce400 upstream. The ELD ALSA control change event is sent by hdmi_present_sense() when eld_changed is true. Currently, it is only true when the ELD buffer contents have been modified. However, the user-visible ELD controls also change to a zero-length value and back when eld_valid is unset/set, and no event is currently sent in such cases (such as when unplugging or replugging a sink). Fix the code to always set eld_changed if eld_valid value is changed, and therefore to always send the change event when the user-visible value changes. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Vlad Catoi authored
commit f0b127fb upstream. Adding support for Steinberg UR22 USB interface via quirks table patch See Ubuntu bug report: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1317244 Also see threads: http://linux-audio.4202.n7.nabble.com/Support-for-Steinberg-UR22-Yamaha-USB-chipset-0499-1509-tc82888.html#a82917 http://www.steinberg.net/forums/viewtopic.php?t=62290 Tested by at least 4 people judging by the threads. Did not test MIDI interface, but audio output and capture both are functional. Built 3.17 kernel with this driver on Ubuntu 14.04 & tested with mpg123 Patch applied to 3.13 Ubuntu kernel works well enough for daily use. Signed-off-by:
Vlad Catoi <vladcatoi@gmail.com> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Harsha Priya authored
commit b450b17c upstream. This patch sets the headphones mode to default before suspending which helps avoid the pop noise on headphones Signed-off-by:
Harsha Priya <harshapriya.n@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 95926035 upstream. The emu10k1 voice allocator takes voice_lock spinlock. When there is no empty stream available, it tries to release a voice used by synth, and calls get_synth_voice. The callback function, snd_emu10k1_synth_get_voice(), however, also takes the voice_lock, thus it deadlocks. The fix is simply removing the voice_lock holds in snd_emu10k1_synth_get_voice(), as this is always called in the spinlock context. Reported-and-tested-by:
Arthur Marsh <arthur.marsh@internode.on.net> Signed-off-by:
-
Anatol Pomozov authored
commit a011e213 upstream. This avoids following kernel crash when try to playback on arm64 [ 107.497203] [<ffffffc00046b310>] snd_pcm_mmap_data_fault+0x90/0xd4 [ 107.503405] [<ffffffc0001541ac>] __do_fault+0xb0/0x498 [ 107.508565] [<ffffffc0001576a0>] handle_mm_fault+0x224/0x7b0 [ 107.514246] [<ffffffc000092640>] do_page_fault+0x11c/0x310 [ 107.519738] [<ffffffc000081100>] do_mem_abort+0x38/0x98 Tested: backported to 3.14 and tried to playback on arm64 machine Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by:
-
Victor Kamensky authored
commit 971a5b6f upstream. The compat_elf_prpsinfo structure does not match the arch/arm struct elf_pspsinfo definition. As result NT_PRPSINFO note in core file created by arm64 kernel for aarch32 (compat) process has wrong size. So gdb cannot display command that caused process crash. Fix is to change size of __compat_uid_t, __compat_gid_t so it would match size of similar fields in arch/arm case. Signed-off-by:
Victor Kamensky <victor.kamensky@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Andy Shevchenko authored
commit 8e45ef68 upstream. Do full clean up at exit, means terminate all ongoing DMA transfers. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Sasha Levin authored
commit 71458cfc upstream. We're missing include/linux/compiler-gcc5.h which is required now because gcc branched off to v5 in trunk. Just copy the relevant bits out of include/linux/compiler-gcc4.h, no new code is added as of now. This fixes a build error when using gcc 5. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Yann Droneaud authored
commit 0b37e097 upstream. According to commit 80af2588 ("fanotify: groups can specify their f_flags for new fd"), file descriptors created as part of file access notification events inherit flags from the event_f_flags argument passed to syscall fanotify_init(2)[1]. Unfortunately O_CLOEXEC is currently silently ignored. Indeed, event_f_flags are only given to dentry_open(), which only seems to care about O_ACCMODE and O_PATH in do_dentry_open(), O_DIRECT in open_check_o_direct() and O_LARGEFILE in generic_file_open(). It's a pity, since, according to some lookup on various search engines and http://codesearch.debian.net/, there's already some userspace code which use O_CLOEXEC: - in systemd's readahead[2]: fanotify_fd = fanotify_init(FAN_CLOEXEC|FAN_NONBLOCK, O_RDONLY|O_LARGEFILE|O_CLOEXEC|O_NOATIME); - in clsync[3]: #define FANOTIFY_EVFLAGS (O_LARGEFILE|O_RDONLY|O_CLOEXEC) int fanotify_d = fanotify_init(FANOTIFY_FLAGS, FANOTIFY_EVFLAGS); - in examples [4] from "Filesystem monitoring in the Linux kernel" article[5] by Aleksander Morgado: if ((fanotify_fd = fanotify_init (FAN_CLOEXEC, O_RDONLY | O_CLOEXEC | O_LARGEFILE)) < 0) Additionally, since commit 48149e9d ("fanotify: check file flags passed in fanotify_init"). having O_CLOEXEC as part of fanotify_init() second argument is expressly allowed. So it seems expected to set close-on-exec flag on the file descriptors if userspace is allowed to request it with O_CLOEXEC. But Andrew Morton raised[6] the concern that enabling now close-on-exec might break existing applications which ask for O_CLOEXEC but expect the file descriptor to be inherited across exec(). In the other hand, as reported by Mihai Dontu[7] close-on-exec on the file descriptor returned as part of file access notify can break applications due to deadlock. So close-on-exec is needed for most applications. More, applications asking for close-on-exec are likely expecting it to be enabled, relying on O_CLOEXEC being effective. If not, it might weaken their security, as noted by Jan Kara[8]. So this patch replaces call to macro get_unused_fd() by a call to function get_unused_fd_flags() with event_f_flags value as argument. This way O_CLOEXEC flag in the second argument of fanotify_init(2) syscall is interpreted and close-on-exec get enabled when requested. [1] http://man7.org/linux/man-pages/man2/fanotify_init.2.html [2] http://cgit.freedesktop.org/systemd/systemd/tree/src/readahead/readahead-collect.c?id=v208#n294 [3] https://github.com/xaionaro/clsync/blob/v0.2.1/sync.c#L1631 https://github.com/xaionaro/clsync/blob/v0.2.1/configuration.h#L38 [4] http://www.lanedo.com/~aleksander/fanotify/fanotify-example.c [5] http://www.lanedo.com/2013/filesystem-monitoring-linux-kernel/ [6] http://lkml.kernel.org/r/20141001153621.65e9258e65a6167bf2e4cb50@linux-foundation.org [7] http://lkml.kernel.org/r/20141002095046.3715eb69@mdontu-l [8] http://lkml.kernel.org/r/20141002104410.GB19748@quack.suse.cz Link: http://lkml.kernel.org/r/cover.1411562410.git.ydroneaud@opteya.comSigned-off-by:
Yann Droneaud <ydroneaud@opteya.com> Reviewed-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Mihai Don\u021bu <mihai.dontu@gmail.com> Cc: Pádraig Brady <P@draigBrady.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jan Kara <jack@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Michael Kerrisk-manpages <mtk.manpages@gmail.com> Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de> Cc: Richard Guy Briggs <rgb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by:
-
Junxiao Bi authored
commit 934f3072 upstream. commit 21caf2fc ("mm: teach mm by current context info to not do I/O during memory allocation") introduces PF_MEMALLOC_NOIO flag to avoid doing I/O inside memory allocation, __GFP_IO is cleared when this flag is set, but __GFP_FS implies __GFP_IO, it should also be cleared. Or it may still run into I/O, like in superblock shrinker. And this will make the kernel run into the deadlock case described in that commit. See Dave Chinner's comment about io in superblock shrinker: Filesystem shrinkers do indeed perform IO from the superblock shrinker and have for years. Even clean inodes can require IO before they can be freed - e.g. on an orphan list, need truncation of post-eof blocks, need to wait for ordered operations to complete before it can be freed, etc. IOWs, Ext4, btrfs and XFS all can issue and/or block on arbitrary amounts of IO in the superblock shrinker context. XFS, in particular, has been doing transactions and IO from the VFS inode cache shrinker since it was first introduced.... Fix this by clearing __GFP_FS in memalloc_noio_flags(), this function has masked all the gfp_mask that will be passed into fs for the processes setting PF_MEMALLOC_NOIO in the direct reclaim path. v1 thread at: https://lkml.org/lkml/2014/9/3/32Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: joyce.xue <xuejiufei@huawei.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Champion Chen authored
commit 85560c4a upstream. Suspend could fail for some platforms because btusb_suspend==> btusb_stop_traffic ==> usb_kill_anchored_urbs. When btusb_bulk_complete returns before system suspend and resubmits an URB, the system cannot enter suspend state. Signed-off-by:
Champion Chen <champion_chen@realsil.com.cn> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Loic Poulain authored
commit 4807b518 upstream. In this expression: seq = (seq - 1) % 8 seq (u8) is implicitly converted to an int in the arithmetic operation. So if seq value is 0, operation is ((0 - 1) % 8) => (-1 % 8) => -1. The new seq value is 0xff which is an invalid ACK value, we expect 0x07. It leads to frequent dropped ACK and retransmission. Fix this by using '&' binary operator instead of '%'. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 01f7feea upstream. Two bits control TX power on BBP_R1 register. Correct the mask, otherwise we clear additional bit on BBP_R1 register, what can have unknown, possible negative effect. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 89ec3dcf upstream. Some implementations of modprobe fail to load the driver for a PCI device automatically because the "interface" part of the modalias from the kernel is lowercase, and the modalias from file2alias is uppercase. The "interface" is the low-order byte of the Class Code, defined in PCI r3.0, Appendix D. Most interface types defined in the spec do not use alpha characters, so they won't be affected. For example, 00h, 01h, 10h, 20h, etc. are unaffected. Print the "interface" byte of the Class Code in uppercase hex, as we already do for the Vendor ID, Device ID, Class, etc. [bhelgaas: changelog] Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Douglas Lehr authored
commit 9fe373f9 upstream. The Crocodile chip occasionally comes up with 4k and 8k BAR sizes. Due to an erratum, setting the SR-IOV page size causes the physical function BARs to expand to the system page size. Since ppc64 uses 64k pages, when Linux tries to assign the smaller resource sizes to the now 64k BARs the address will be truncated and the BARs will overlap. Force Linux to allocate the resource as a full page, which avoids the overlap. [bhelgaas: print expanded resource, too] Signed-off-by:
Douglas Lehr <dllehr@us.ibm.com> Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 56fab6e1 upstream. Geert Uytterhoeven reported a warning when building pci-mvebu: drivers/pci/host/pci-mvebu.c: In function 'mvebu_get_tgt_attr': drivers/pci/host/pci-mvebu.c:887:39: warning: 'rtype' may be used uninitialized in this function [-Wmaybe-uninitialized] if (slot == PCI_SLOT(devfn) && type == rtype) { ^ And indeed, the code of mvebu_get_tgt_attr() may lead to the usage of rtype when being uninitialized, even though it would only happen if we had entries other than I/O space and 32 bits memory space. This commit fixes that by simply skipping the current DT range being considered, if it doesn't match the resource type we're looking for. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Oren Givon authored
commit 4f08970f upstream. Add 4 missing PCI IDs for the 7260 series. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Andy Adamson authored
commit d1f456b0 upstream. Commit 2f60ea6b ("NFSv4: The NFSv4.0 client must send RENEW calls if it holds a delegation") set the NFS4_RENEW_TIMEOUT flag in nfs4_renew_state, and does not put an nfs41_proc_async_sequence call, the NFSv4.1 lease renewal heartbeat call, on the wire to renew the NFSv4.1 state if the flag was not set. The NFS4_RENEW_TIMEOUT flag is set when "now" is after the last renewal (cl_last_renewal) plus the lease time divided by 3. This is arbitrary and sometimes does the following: In normal operation, the only way a future state renewal call is put on the wire is via a call to nfs4_schedule_state_renewal, which schedules a nfs4_renew_state workqueue task. nfs4_renew_state determines if the NFS4_RENEW_TIMEOUT should be set, and the calls nfs41_proc_async_sequence, which only gets sent if the NFS4_RENEW_TIMEOUT flag is set. Then the nfs41_proc_async_sequence rpc_release function schedules another state remewal via nfs4_schedule_state_renewal. Without this change we can get into a state where an application stops accessing the NFSv4.1 share, state renewal calls stop due to the NFS4_RENEW_TIMEOUT flag _not_ being set. The only way to recover from this situation is with a clientid re-establishment, once the application resumes and the server has timed out the lease and so returns NFS4ERR_BAD_SESSION on the subsequent SEQUENCE operation. An example application: open, lock, write a file. sleep for 6 * lease (could be less) ulock, close. In the above example with NFSv4.1 delegations enabled, without this change, there are no OP_SEQUENCE state renewal calls during the sleep, and the clientid is recovered due to lease expiration on the close. This issue does not occur with NFSv4.1 delegations disabled, nor with NFSv4.0, with or without delegations enabled. Signed-off-by:
Andy Adamson <andros@netapp.com> Link: http://lkml.kernel.org/r/1411486536-23401-1-git-send-email-andros@netapp.com Fixes: 2f60ea6b (NFSv4: The NFSv4.0 client must send RENEW calls...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit df817ba3 upstream. The current open/lock state recovery unfortunately does not handle errors such as NFS4ERR_CONN_NOT_BOUND_TO_SESSION correctly. Instead of looping, just proceeds as if the state manager is finished recovering. This patch ensures that we loop back, handle higher priority errors and complete the open/lock state recovery. Signed-off-by:
-
Trond Myklebust authored
commit a4339b7b upstream. If a NFSv4.x server returns NFS4ERR_STALE_CLIENTID in response to a CREATE_SESSION or SETCLIENTID_CONFIRM in order to tell us that it rebooted a second time, then the client will currently take this to mean that it must declare all locks to be stale, and hence ineligible for reboot recovery. RFC3530 and RFC5661 both suggest that the client should instead rely on the server to respond to inelegible open share, lock and delegation reclaim requests with NFS4ERR_NO_GRACE in this situation. Signed-off-by:
-
Frans Klaver authored
commit dc318756 upstream. If the chosen baud rate is large enough (e.g. 3.5 megabaud), the calculated n values in serial_omap_is_baud_mode16() may become 0. This causes a division by zero when calculating the difference between calculated and desired baud rates. To prevent this, cap the n13 and n16 values on 1. Division by zero in kernel. [<c00132e0>] (unwind_backtrace) from [<c00112ec>] (show_stack+0x10/0x14) [<c00112ec>] (show_stack) from [<c01ed7bc>] (Ldiv0+0x8/0x10) [<c01ed7bc>] (Ldiv0) from [<c023805c>] (serial_omap_baud_is_mode16+0x4c/0x68) [<c023805c>] (serial_omap_baud_is_mode16) from [<c02396b4>] (serial_omap_set_termios+0x90/0x8d8) [<c02396b4>] (serial_omap_set_termios) from [<c0230a0c>] (uart_change_speed+0xa4/0xa8) [<c0230a0c>] (uart_change_speed) from [<c0231798>] (uart_set_termios+0xa0/0x1fc) [<c0231798>] (uart_set_termios) from [<c022bb44>] (tty_set_termios+0x248/0x2c0) [<c022bb44>] (tty_set_termios) from [<c022c17c>] (set_termios+0x248/0x29c) [<c022c17c>] (set_termios) from [<c022c3e4>] (tty_mode_ioctl+0x1c8/0x4e8) [<c022c3e4>] (tty_mode_ioctl) from [<c0227e70>] (tty_ioctl+0xa94/0xb18) [<c0227e70>] (tty_ioctl) from [<c00cf45c>] (do_vfs_ioctl+0x4a0/0x560) [<c00cf45c>] (do_vfs_ioctl) from [<c00cf568>] (SyS_ioctl+0x4c/0x74) [<c00cf568>] (SyS_ioctl) from [<c000e480>] (ret_fast_syscall+0x0/0x30) Signed-off-by:
Frans Klaver <frans.klaver@xsens.com> Signed-off-by:
-
Willy Tarreau authored
commit 72cf9012 upstream. This fix ensures that we never meet an integer overflow while adding 255 while parsing a variable length encoding. It works differently from commit 206a81c1 ("lzo: properly check for overruns") because instead of ensuring that we don't overrun the input, which is tricky to guarantee due to many assumptions in the code, it simply checks that the cumulated number of 255 read cannot overflow by bounding this number. The MAX_255_COUNT is the maximum number of times we can add 255 to a base count without overflowing an integer. The multiply will overflow when multiplying 255 by more than MAXINT/255. The sum will overflow earlier depending on the base count. Since the base count is taken from a u8 and a few bits, it is safe to assume that it will always be lower than or equal to 2*255, thus we can always prevent any overflow by accepting two less 255 steps. This patch also reduces the CPU overhead and actually increases performance by 1.1% compared to the initial code, while the previous fix costs 3.1% (measured on x86_64). The fix needs to be backported to all currently supported stable kernels. Reported-by:
Willem Pinckaers <willem@lekkertech.net> Cc: "Don A. Bailey" <donb@securitymouse.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Willy Tarreau authored
commit af958a38 upstream. This reverts commit 206a81c1 ("lzo: properly check for overruns"). As analysed by Willem Pinckaers, this fix is still incomplete on certain rare corner cases, and it is easier to restart from the original code. Reported-by:
-
Willy Tarreau authored
commit d98a0526 upstream. Add a complete description of the LZO format as processed by the decompressor. I have not found a public specification of this format hence this analysis, which will be used to better understand the code. Cc: Willem Pinckaers <willem@lekkertech.net> Cc: "Don A. Bailey" <donb@securitymouse.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit e4dc601b upstream. hwreg_present() and hwreg_write() temporarily change the VBR register to another vector table. This table contains a valid bus error handler only, all other entries point to arbitrary addresses. If an interrupt comes in while the temporary table is active, the processor will start executing at such an arbitrary address, and the kernel will crash. While most callers run early, before interrupts are enabled, or explicitly disable interrupts, Finn Thain pointed out that macsonic has one callsite that doesn't, causing intermittent boot crashes. There's another unsafe callsite in hilkbd. Fix this for good by disabling and restoring interrupts inside hwreg_present() and hwreg_write(). Explicitly disabling interrupts can be removed from the callsites later. Reported-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
