Merge tag 'linux-can-fixes-for-4.8-20160921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-09-21

this is another pull request of one patch for the upcoming linux-4.8 release.

Marek Vasut fixes the CAN-FD bit rate switch in the ifi driver by configuring
the transmitter delay.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Taking over as maintainer since Gary Zambrano is no longer working
for Broadcom.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko reported an UBSAN warning happening in ip_idents_reserve()

[] UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:11
[] signed integer overflow:
[] -2117905507 + -695755206 cannot be represented in type 'int'

Since we do not have uatomic_add_return() yet, use atomic_cmpxchg()
so that the arithmetics can be done using unsigned int.

Fixes: 04ca6973 ("ip: make IP identifiers less predictable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleans devlink resources by calling devlink_port_unregister()
to avoid the following issues:

- Kernel panic when triggering reset flow.
- Memory leak due to unfreed resources in mlx4_init_port_info().

Fixes: 09d4d087 ("mlx4: Implement devlink interface")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2016-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.8

iwlwifi

* fix to prevent firmware crash when sending off-channel frames
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Configure the transmitter delay register at +0x1c to correctly handle
the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample
point) to a proper offset, so that the TDC mechanism works and won't
generate error frames on the CAN link.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

When I introduced the lastuse member I made a subtle error because it was
returned as an absolute value but that is meaningless to user-space as it
doesn't allow to see how old exactly an entry is. Let's make it similar to
how the bridge returns such values and make it relative to "now" (jiffies).
This allows us to show the actual age of the entries and is much more
useful (e.g. user-space daemons can age out entries, iproute2 can display
the lastuse properly).

Fixes: 43b9e127 ("net: ipmr/ip6mr: add support for keeping an entry age")
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: correct the flow of PHY

First, to enable the PHY as early as possible. Some settings may fail if the
PHY is power down.

Move the other PHY settings to hw_phy_cfg() to make sure the order is correct.

Finally, disable ALDPS and EEE before updating the PHY for RTL8153.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Disable ALDPS and EEE to avoid the possible failure when setting the PHY.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove r8153_enable_eee().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the PHY relative settings together to hw_phy_cfg().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move enabling PHY to init(), otherwise some other settings may fail.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the following functions forward.

	r8152_mmd_indirect()
	r8152_mmd_read()
	r8152_mmd_write()
	r8152_eee_en()
	r8152b_enable_eee()
	r8153_eee_en()
	r8153_enable_eee()
	r8152b_enable_fc()
	r8153_aldps_en()
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We were missing check for 25G and 100G while checking port speed,
which lead to less number of queues getting allocated for 25G & 100G
adapters and leading to low throughput. Adding the missing check for
both NIC and vNIC driver.

Also fixes port advertisement for 25G and 100G in ethtool output.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.8-20160919' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-09-19

this is a pull request of one patch for the upcoming linux-4.8 release.

The patch by Fabio Estevam fixes the pm handling in the flexcan driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit fe56b9e6 ("qed: Add module with basic common support")
has introduced a stack corruption during probe, where filling a
local struct with data to be sent to management firmware is incorrectly
filled; The data is written outside of the struct and corrupts
the stack.

Changes from v1:
----------------
 - Correct the value written [Caught by David Laight]

Fixes: fe56b9e6 ("qed: Add module with basic common support")
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The core distributed switch architecture code currently does not have
a MAINTAINERS entry, which results in some contributions not landing
in the right peoples inbox.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8c14586f ("net: ipv6: Use passed in table for nexthop
lookups") introduced a regression: insertion of an IPv6 route in a table
not containing the appropriate connected route for the gateway but which
contained a non-connected route (like a default gateway) fails while it
was previously working:

    $ ip link add eth0 type dummy
    $ ip link set up dev eth0
    $ ip addr add 2001:db8::1/64 dev eth0
    $ ip route add ::/0 via 2001:db8::5 dev eth0 table 20
    $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
    RTNETLINK answers: No route to host
    $ ip -6 route show table 20
    default via 2001:db8::5 dev eth0  metric 1024  pref medium

After this patch, we get:

    $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
    $ ip -6 route show table 20
    2001:db8:cafe::1 via 2001:db8::6 dev eth0  metric 1024  pref medium
    default via 2001:db8::5 dev eth0  metric 1024  pref medium

Fixes: 8c14586f ("net: ipv6: Use passed in table for nexthop lookups")
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
mlx5 fixes to 4.8-rc6

This series series has a fix from Roi to memory corruption bug in
the bulk flow counters code and two late and hopefully last fixes
from me to the new eswitch offloads code.

Series done over net commit 37dd3482 "bna: fix crash in bnad_get_strings()"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

E-switch mode changes involve creating HW tables, potentially allocating
netdevices, etc, and things can fail. Add an attempt to rollback to the
existing mode when changing to the new mode fails. Only if rollback fails,
getting proper SRIOV functionality requires module unload or sriov
disablement/enablement.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When enablement of the SRIOV e-switch in certain mode (switchdev or legacy)
fails, we must set the mode to none. Otherwise, we'll run into double free
based crashes when further attempting to deal with the e-switch (such
as when disabling sriov or unloading the driver).
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The FW command output length should be only the length of struct
mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy
call which is invoked later in the driver to write over wrong memory
address and corrupt kernel memory which results in random crashes.

This bug was found using the kernel address sanitizer (kasan).

Fixes: a351a1b0 ('net/mlx5: Introduce bulk reading of flow counters')
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On a imx6ul-pico board the following error is seen during system suspend:

dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110
PM: Device 2090000.flexcan failed to resume: error -110

The reason for this suspend error is because when the CAN interface is not
active the clocks are disabled and then flexcan_chip_enable() will
always fail due to a timeout error.

In order to fix this issue, only call flexcan_chip_enable/disable()
when the CAN interface is active.

Based on a patch from Dong Aisheng in the NXP kernel.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge tag 'mac80211-for-davem-2016-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Two more fixes:
 * reject aggregation sessions for TSID/TID 8-16 that we
   can never use anyway and which could confuse drivers
 * check return value of skb_linearize()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

MAC devices use the RWKPKTEN and MGKPKTEN bits of the PMT Control/Status
register to generate power management events.
So this patch is to properly set the RWKPKTEN [BIT(2)] inside the
PMT register (needed in case of global unicast).
Reported-by: Aditi SHARMA <aditi-hed.sharma@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6e7333d3 "net: add rx_nohandler stat counter" added the new entry
rx_nohandler into struct rtnl_link_stats64. Unfortunately the bna
driver foolishly depends on the structure. It uses part of it for
ethtool statistics and it's not bad but the driver assumes its size
is constant as it defines string for each existing entry. The problem
occurs when the structure is extended because you need to modify bna
driver as well. If not any attempt to retrieve ethtool statistics results
in crash in bnad_get_strings().
The patch changes BNAD_ETHTOOL_STATS_NUM so it counts real number of
strings in the array and also removes rtnl_link_stats64 entries that
are not used in output and are always zero.

Fixes: 6e7333d3 "net: add rx_nohandler stat counter"
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ba5ca784 "bna: check for dma mapping errors" added besides other
things a statistic that counts number of DMA buffer mapping failures
per each Rx queue. This counter is not included in ethtool stats output.

Fixes: ba5ca784 "bna: check for dma mapping errors"
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'iwlwifi-for-kalle-2016-09-15' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes

* fix to prevent firmware crash when sending off-channel frames

This function actually operates on u32 yet its paramteres were declared
as u16, causing integer truncation upon calling.

Note in patch context that ADDIP_SERIAL_SIGN_BIT is already 32 bits.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb is not freed if newsk is NULL. Rework the error path so free_skb is
unconditionally called on function exit.

Fixes: c3ea9fa2 ("[IrDA] af_irda: IRDA_ASSERT cleanups")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A malicious TCP receiver, sending SACK, can force the sender to split
skbs in write queue and increase its memory usage.

Then, when socket is closed and its write queue purged, we might
overflow sk_forward_alloc (It becomes negative)

sk_mem_reclaim() does nothing in this case, and more than 2GB
are leaked from TCP perspective (tcp_memory_allocated is not changed)

Then warnings trigger from inet_sock_destruct() and
sk_stream_kill_queues() seeing a not zero sk_forward_alloc

All TCP stack can be stuck because TCP is under memory pressure.

A simple fix is to preemptively reclaim from sk_mem_uncharge().

This makes sure a socket wont have more than 2 MB forward allocated,
after burst and idle period.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a TCP socket gets a large write queue, an overflow can happen
in a test in __tcp_retransmit_skb() preventing all retransmits.

The flow then stalls and resets after timeouts.

Tested:

sysctl -w net.core.wmem_max=1000000000
netperf -H dest -- -s 1000000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of error during netback_probe() (e.g. an entry missing on the
xenstore) netback_remove() is called on the new device, which will set
the device backend state to XenbusStateClosed by calling
set_backend_state(). However, the backend state wasn't initialized by
netback_probe() at this point, which will cause and invalid transaction
and set_backend_state() to BUG().

Initialize the backend state at the beginning of netback_probe() to
XenbusStateInitialising, and create two new valid state transitions on
set_backend_state(), from XenbusStateInitialising to XenbusStateClosed,
and from XenbusStateInitialising to XenbusStateInitWait.
Signed-off-by: Filipe Manco <filipe.manco@neclab.eu>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
390: qeth patches

here are several fixes for the s390 qeth driver, built for net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 5f78e29c ("qeth: optimize IP handling in rx_mode callback")
restructured the internal address handling.
This work broke setting a virtual IP address.
The command
echo 10.1.1.1 > /sys/bus/ccwgroup/devices/<device>/vipa/add4
fails with file exist error even if the IP address has not
been set before.

It turned out that the search result for the IP address
search is handled incorrectly in the VIPA case.

This patch fixes the setting of an virtual IP address.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to recent performance measurements, turning on net_device
feature NETIF_F_SG only behaves well, but turning on feature
NETIF_F_GSO shows bad results. Since the kernel activates NETIF_F_GSO
automatically as soon as the driver configures feature NETIF_F_SG, qeth
should not activate feature NETIF_F_SG per default, until the qeth
problems with NETIF_F_GSO are solved.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To reduce the need of skb_linearize() calls, gso_max_segs of qeth
net_devices had been limited according to the maximum number of qdio SBAL
elements. But a gso segment cannot be larger than the mtu-size, while an
SBAL element can contain up to 4096 bytes. The gso_max_segs limitation
limits the maximum packet size given to the qeth driver. Performance
measurements with tso-enabled qeth network interfaces and mtu-size 1500
showed, that the disadvantage of smaller packets is much more severe than
the advantage of fewer skb_linearize() calls.
This patch gets rid of the gso_max_segs limitations in the qeth driver.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_iucv socket programs with HiperSockets as transport make use of the qdio
completion queue. Running such an af_iucv socket program may result in a
crash:

[90341.677709] Oops: 0038 ilc:2 [#1] SMP
[90341.677743] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.6.0-20160720.0.0e86ec7.5e62689.fc23.s390xperformance #1
[90341.677744] Hardware name: IBM              2964 N96              703              (LPAR)
[90341.677746] task: 00000000edb79f00 ti: 00000000edb84000 task.ti: 00000000edb84000
[90341.677748] Krnl PSW : 0704d00180000000 000000000075bc50 (qeth_qdio_input_handler+0x258/0x4e0)
[90341.677756]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: 000003d10391e900 0000000000000001 00000000e61e6000 0000000000000005
[90341.677759]            0000000000a9e6ec 5420040001a77400 0000000000000001 000000000000006f
[90341.677761]            00000000e0d83f00 0000000000000003 0000000000000010 5420040001a77400
[90341.677784]            000000007ba8b000 0000000000943fd0 000000000075bc4e 00000000ed3b3c10
[90341.677793] Krnl Code: 000000000075bc42: e320cc180004        lg      %r2,3096(%r12)
           000000000075bc48: c0e5ffffc5cc       brasl   %r14,7547e0
          #000000000075bc4e: 1816               lr      %r1,%r6
          >000000000075bc50: ba19b008           cs      %r1,%r9,8(%r11)
           000000000075bc54: ec180041017e       cij     %r1,1,8,75bcd6
           000000000075bc5a: 5810b008           l       %r1,8(%r11)
           000000000075bc5e: ec16005c027e       cij     %r1,2,6,75bd16
           000000000075bc64: 5090b008           st      %r9,8(%r11)
[90341.677807] Call Trace:
[90341.677810] ([<000000000075bbc0>] qeth_qdio_input_handler+0x1c8/0x4e0)
[90341.677812] ([<000000000070efbc>] qdio_kick_handler+0x124/0x2a8)
[90341.677814] ([<0000000000713570>] __tiqdio_inbound_processing+0xf0/0xcd0)
[90341.677818] ([<0000000000143312>] tasklet_action+0x92/0x120)
[90341.677823] ([<00000000008b6e72>] __do_softirq+0x112/0x308)
[90341.677824] ([<0000000000142bce>] irq_exit+0xd6/0xf8)
[90341.677829] ([<000000000010b1d2>] do_IRQ+0x6a/0x88)
[90341.677830] ([<00000000008b6322>] io_int_handler+0x112/0x220)
[90341.677832] ([<0000000000102b2e>] enabled_wait+0x56/0xa8)
[90341.677833] ([<0000000000000000>]           (null))
[90341.677835] ([<0000000000102e32>] arch_cpu_idle+0x32/0x48)
[90341.677838] ([<000000000018a126>] cpu_startup_entry+0x266/0x2b0)
[90341.677841] ([<0000000000113b38>] smp_start_secondary+0x100/0x110)
[90341.677843] ([<00000000008b68a6>] restart_int_handler+0x62/0x78)
[90341.677845] ([<00000000008b6588>] psw_idle+0x3c/0x40)
[90341.677846] Last Breaking-Event-Address:
[90341.677848]  [<00000000007547ec>] qeth_dbf_longtext+0xc/0xc0
[90341.677849]
[90341.677850] Kernel panic - not syncing: Fatal exception in interrupt

qeth_qdio_cq_handler() analyzes SBALs on this completion queue, but does
not observe the limit of 16 SBAL elements per SBAL. This patch adds the
additional check to process not more than 16 SBAL elements.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The qeth IP address mapping logic has been reworked recently. It
causes now problems to specify qeth sysfs attribute "hsuid" in DOWN
state, which is allowed. Postpone registering or deregistering of
IP-addresses in this case.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth_l3_dev_hsuid_store() changes the ip hash table, which
requires the ip_lock.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>