- 07 Aug, 2017 40 commits
-
-
Dave Jiang authored
[ Upstream commit 1594c18f ] Adding Skylake Xeon PCI device ids for ioatdma and related bits. Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stafford Horne authored
[ Upstream commit 086cc1c3 ] The build robot reports: .tmp_kallsyms1.o: In function `kallsyms_relative_base': >> (.rodata+0x8a18): undefined reference to `_text' This is when using 'make alldefconfig'. Adding this _text symbol to mark the start of the kernel as in other architecture fixes this. Signed-off-by:
Stafford Horne <shorne@gmail.com> Acked-by:
Jonas Bonn <jonas@southpole.se> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 88e20c74 ] The ICOLL controller doesn't provide any facility to configure the wakeup sources. That's the reason why this implementation lacks the irq_set_wake implementation. But this prevent us from properly entering power management states like "suspend to idle". So enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND to let the irqchip core allows and handles the power management. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Link: https://lkml.kernel.org/r/1482863397-11400-1-git-send-email-stefan.wahren@i2se.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
John Hsu authored
[ Upstream commit a1792cda ] The clk_ref_div is not configured in the correct position of the register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned the wrong value. Signed-off-by:
John Hsu <KCHSU0@nuvoton.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Phil Reid authored
[ Upstream commit 13288bdf ] Some system have multiple dw devices. Currently the driver uses a fixed name for the debugfs dir. Append dev name to the debugfs dir name to make it unique. Signed-off-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 63c3194b ] The RESET register only have one self clearing bit and it should not be cached. If it is cached, when we sync the registers back to the chip we will initiate a software reset as well, which is not desirable. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
-
Strashko, Grygorii authored
[ Upstream commit 2f884e6e ] The below call chain generates "scheduling while atomic" backtrace and causes system crash when Keystone 2 IRQ chip driver is used with RT-kernel: gic_handle_irq() |-__handle_domain_irq() |-generic_handle_irq() |-keystone_irq_handler() |-regmap_read() |-regmap_lock_spinlock() |-rt_spin_lock() The reason is that Keystone driver dispatches IRQ using chained IRQ handler and accesses I/O memory through syscon->regmap(mmio) which is implemented as fast_io regmap and uses regular spinlocks for synchronization, but spinlocks transformed to rt_mutexes on RT. Hence, convert Keystone 2 IRQ driver to use generic irq handler instead of chained IRQ handler. This way it will be compatible with RT kernel where it will be forced thread IRQ handler while in non-RT kernel it still will be executed in HW IRQ context. Cc: Suman Anna <s-anna@ti.com> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Suman Anna <s-anna@ti.com> Link: https://lkml.kernel.org/r/20161208233310.10329-1-grygorii.strashko@ti.comSigned-off-by:
-
Arnd Bergmann authored
[ Upstream commit 45e86971 ] Using ancient compilers (gcc-4.5 or older) on ARM, we get a link failure with the vfio-pci driver: ERROR: "__aeabi_lcmp" [drivers/vfio/pci/vfio-pci.ko] undefined! The reason is that the compiler tries to do a comparison of a 64-bit range. This changes it to convert to a 32-bit number explicitly first, as newer compilers do for themselves. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Jordan Crouse authored
[ Upstream commit a6cb3b86 ] For every submission buffer object one of MSM_SUBMIT_BO_WRITE and MSM_SUBMIT_BO_READ must be set (and nothing else). If we allowed zero then the buffer object would never get queued to be unreferenced. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Jordan Crouse authored
[ Upstream commit 6490abc4 ] The error cases in submit_reloc() need to put back the virtual address of the bo before failling. Add a single failure path for the function. Signed-off-by:
-
Jordan Crouse authored
[ Upstream commit 88b333b0 ] Currently the value written to CP_RB_WPTR is calculated on the fly as (rb->next - rb->start). But as the code is designed rb->next is wrapped before writing the commands so if a series of commands happened to fit perfectly in the ringbuffer, rb->next would end up being equal to rb->size / 4 and thus result in an out of bounds address to CP_RB_WPTR. The easiest way to fix this is to mask WPTR when writing it to the hardware; it makes the hardware happy and the rest of the ringbuffer math appears to work and there isn't any point in upsetting anything. Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 10b1c04e ] Demoting simple flow steering rule priority (for DPDK) was achieved by wrapping FW commands MLX4_QP_FLOW_STEERING_ATTACH/DETACH for the PF as well, and forcing the priority to MLX4_DOMAIN_NIC in the wrapper function for the PF and all VFs. In function mlx4_ib_create_flow(), this change caused the main rule creation for the PF to be wrapped, while it left the associated tunnel steering rule creation unwrapped for the PF. This mismatch caused rule deletion failures in mlx4_ib_destroy_flow() for the PF when the detach wrapper function did not find the associated tunnel-steering rule (since creation of that rule for the PF did not go through the wrapper function). Fix this by setting MLX4_QP_FLOW_STEERING_ATTACH/DETACH to be "native" (so that the PF invocation does not go through the wrapper), and perform the required priority demotion for the PF in the mlx4_ib_create_flow() code path. Fixes: 48564135 ("net/mlx4_core: Demote simple multicast and broadcast flow steering rules") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit c1d5f8ff ] This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent() by checking DMA address alignment in advance and performing proper folding in case of error. Fixes: 5b0bf5e2 ("mlx4_core: Support ICM tables in coherent memory") Reported-by:
Ozgur Karatas <okaratas@member.fsf.org> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 3b01fe7f ] mlx4_QP_FLOW_STEERING_DETACH_wrapper first removes the steering rule (which results in freeing the rule structure), and then references a field in this struct (the qp number) when releasing the busy-status on the rule's qp. Since this memory was freed, it could reallocated and changed. Therefore, the qp number in the struct may be incorrect, so that we are releasing the incorrect qp. This leaves the rule's qp in the busy state (and could possibly release an incorrect qp as well). Fix this by saving the qp number in a local variable, for use after removing the steering rule. Fixes: 2c473ae7 ("net/mlx4_core: Disallow releasing VF QPs which have steering rules") Signed-off-by:
-
Zheng Li authored
ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output [ Upstream commit e4c5e13a ] There is an inconsistent conditional judgement between __ip6_append_data and ip6_finish_output functions, the variable length in __ip6_append_data just include the length of application's payload and udp6 header, don't include the length of ipv6 header, but in ip6_finish_output use (skb->len > ip6_skb_dst_mtu(skb)) as judgement, and skb->len include the length of ipv6 header. That causes some particular application's udp6 payloads whose length are between (MTU - IPv6 Header) and MTU were fragmented by ip6_fragment even though the rst->dev support UFO feature. Add the length of ipv6 header to length in __ip6_append_data to keep consistent conditional judgement as ip6_finish_output for ip6 fragment. Signed-off-by:
Zheng Li <james.z.li@ericsson.com> Signed-off-by:
-
Or Gerlitz authored
[ Upstream commit 9da34cd3 ] Under the switchdev/offloads mode, packets that don't match any e-switch steering rule are sent towards the e-switch management port. We use a NIC HW steering rule set per vport (uplink and VFs) to make them be received into the host OS through the respective vport representor netdevice. Currnetly such missed RoCE packets will not get to this NIC steering rule, and hence VF RoCE will not work over the slow path of the offloads mode. This is b/c these packets will be matched by a steering rule added by the firmware that serves RoCE traffic set on the PF NIC vport which is also the e-switch management port under SRIOV. Disabling RoCE on the e-switch management vport when we are in the offloads mode, will signal to the firmware to remove their RoCE rule, and then the missed RoCE packets will be matched by the representor NIC steering rule as any other missed packets. To achieve that, we disable RoCE on the PF vport. We do that by removing (hot-unplugging) the IB device instance associated with the PF. This is also required by our current model where the PF serves as the uplink representor and hence only SW switching (TC, bridge, OVS) applications and slow path vport mlx5e net-device should be running over that vport. Fixes: c930a3ad ('net/mlx5e: Add devlink based SRIOV mode changes') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Pali Rohár authored
[ Upstream commit 4cf48f1d ] Trying to initialize eMMC slot as SDIO or SD cause failure in n900 port of qemu. eMMC itself is not detected and is not working. Real Nokia N900 harware does not have this problem. As eMMC is really not SDIO or SD based such change is harmless and will fix support for qemu. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Roger Quadros authored
[ Upstream commit 5acd016c ] USB2 port can be operated in dual-role mode but till we have dual-role support in dwc3 driver let's limit this port to peripheral mode. If we don't do so it defaults to host mode. USB1 port is meant for host only operation and we don't want both ports in host only mode. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Milo Kim authored
[ Upstream commit 82038157 ] Specify the power button interrupt number which is from the datasheet. Signed-off-by:
Milo Kim <woogyom.kim@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Milo Kim authored
[ Upstream commit 81d7358d ] Add interrupt specifiers for USB and AC charger input. Interrupt numbers are from the datasheet. Fix wrong property for compatible string. Signed-off-by:
-
Maninder Singh authored
[ Upstream commit 5066d529 ] Issue caught with static analysis tool: "Dangerous usage of 'name' (strncpy doesn't always 0-terminate it)" Use strlcpy _includes_ the NUL terminator, and strlcat() which ensures that it won't overflow the buffer. Reported-by:
Maninder Singh <maninder1.s@samsung.com> Signed-off-by:
Vaneet Narang <v.narang@samsung.com> CC: Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Chun-Hao Lin authored
[ Upstream commit 610c9087 ] This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by:
Chun-Hao Lin <hau@realtek.com> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 0dad3a30 ] If mce_device_init() fails then the mce device pointer is NULL and the AMD mce code happily dereferences it. Add a sanity check. Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Williams authored
commit bbb3be17 upstream. Fix warnings of the form... WARNING: CPU: 10 PID: 4983 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/class/dax/dax12.0' Call Trace: dump_stack+0x63/0x86 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5a/0x80 ? kernfs_path_from_node+0x4f/0x60 sysfs_warn_dup+0x62/0x80 sysfs_do_create_link_sd.isra.2+0x97/0xb0 sysfs_create_link+0x25/0x40 device_add+0x266/0x630 devm_create_dax_dev+0x2cf/0x340 [dax] dax_pmem_probe+0x1f5/0x26e [dax_pmem] nvdimm_bus_probe+0x71/0x120 ...by reusing the namespace id for the device-dax instance name. Now that we have decided that there will never by more than one device-dax instance per libnvdimm-namespace parent device [1], we can directly reuse the namepace ids. There are some possible follow-on cleanups, but those are saved for a later patch to simplify the -stable backport. [1]: https://lists.01.org/pipermail/linux-nvdimm/2016-December/008266.html Fixes: 98a29c39 ("libnvdimm, namespace: allow creation of multiple pmem...") Cc: Jeff Moyer <jmoyer@redhat.com> Reported-by:
Dariusz Dokupil <dariusz.dokupil@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Eric Dumazet authored
commit 6e7bc478 upstream. My recent change missed fact that UFO would perform a complete UDP checksum before segmenting in frags. In this case skb->ip_summed is set to CHECKSUM_NONE. We need to add this valid case to skb_needs_check() Fixes: b2504a5d ("net: reduce skb_warn_bad_offload() noise") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Kees Cook authored
commit e9a330c4 upstream. The per-prz spinlock should be using the dynamic initializer so that lockdep can correctly track it. Without this, under lockdep, we get a warning at boot that the lock is in non-static memory. Fixes: 10970449 ("pstore: Make spinlock per zone instead of global") Fixes: 76d5692a ("pstore: Correctly initialize spinlock and flags") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
commit 76d5692a upstream. The ram backend wasn't always initializing its spinlock correctly. Since it was coming from kzalloc memory, though, it was harmless on architectures that initialize unlocked spinlocks to 0 (at least x86 and ARM). This also fixes a possibly ignored flag setting too. When running under CONFIG_DEBUG_SPINLOCK, the following Oops was visible: [ 0.760836] persistent_ram: found existing buffer, size 29988, start 29988 [ 0.765112] persistent_ram: found existing buffer, size 30105, start 30105 [ 0.769435] persistent_ram: found existing buffer, size 118542, start 118542 [ 0.785960] persistent_ram: found existing buffer, size 0, start 0 [ 0.786098] persistent_ram: found existing buffer, size 0, start 0 [ 0.786131] pstore: using zlib compression [ 0.790716] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 0.790729] lock: 0xffffffc0d1ca9bb0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 0.790742] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-rc2+ #913 [ 0.790747] Hardware name: Google Kevin (DT) [ 0.790750] Call trace: [ 0.790768] [<ffffff900808ae88>] dump_backtrace+0x0/0x2bc [ 0.790780] [<ffffff900808b164>] show_stack+0x20/0x28 [ 0.790794] [<ffffff9008460ee0>] dump_stack+0xa4/0xcc [ 0.790809] [<ffffff9008113cfc>] spin_dump+0xe0/0xf0 [ 0.790821] [<ffffff9008113d3c>] spin_bug+0x30/0x3c [ 0.790834] [<ffffff9008113e28>] do_raw_spin_lock+0x50/0x1b8 [ 0.790846] [<ffffff9008a2d2ec>] _raw_spin_lock_irqsave+0x54/0x6c [ 0.790862] [<ffffff90083ac3b4>] buffer_size_add+0x48/0xcc [ 0.790875] [<ffffff90083acb34>] persistent_ram_write+0x60/0x11c [ 0.790888] [<ffffff90083aab1c>] ramoops_pstore_write_buf+0xd4/0x2a4 [ 0.790900] [<ffffff90083a9d3c>] pstore_console_write+0xf0/0x134 [ 0.790912] [<ffffff900811c304>] console_unlock+0x48c/0x5e8 [ 0.790923] [<ffffff900811da18>] register_console+0x3b0/0x4d4 [ 0.790935] [<ffffff90083aa7d0>] pstore_register+0x1a8/0x234 [ 0.790947] [<ffffff90083ac250>] ramoops_probe+0x6b8/0x7d4 [ 0.790961] [<ffffff90085ca548>] platform_drv_probe+0x7c/0xd0 [ 0.790972] [<ffffff90085c76ac>] driver_probe_device+0x1b4/0x3bc [ 0.790982] [<ffffff90085c7ac8>] __device_attach_driver+0xc8/0xf4 [ 0.790996] [<ffffff90085c4bfc>] bus_for_each_drv+0xb4/0xe4 [ 0.791006] [<ffffff90085c7414>] __device_attach+0xd0/0x158 [ 0.791016] [<ffffff90085c7b18>] device_initial_probe+0x24/0x30 [ 0.791026] [<ffffff90085c648c>] bus_probe_device+0x50/0xe4 [ 0.791038] [<ffffff90085c35b8>] device_add+0x3a4/0x76c [ 0.791051] [<ffffff90087d0e84>] of_device_add+0x74/0x84 [ 0.791062] [<ffffff90087d19b8>] of_platform_device_create_pdata+0xc0/0x100 [ 0.791073] [<ffffff90087d1a2c>] of_platform_device_create+0x34/0x40 [ 0.791086] [<ffffff900903c910>] of_platform_default_populate_init+0x58/0x78 [ 0.791097] [<ffffff90080831fc>] do_one_initcall+0x88/0x160 [ 0.791109] [<ffffff90090010ac>] kernel_init_freeable+0x264/0x31c [ 0.791123] [<ffffff9008a25bd0>] kernel_init+0x18/0x11c [ 0.791133] [<ffffff9008082ec0>] ret_from_fork+0x10/0x50 [ 0.793717] console [pstore-1] enabled [ 0.797845] pstore: Registered ramoops as persistent store backend [ 0.804647] ramoops: attached 0x100000@0xf7edc000, ecc: 0/0 Fixes: 663deb47 ("pstore: Allow prz to control need for locking") Fixes: 10970449 ("pstore: Make spinlock per zone instead of global") Reported-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Joel Fernandes authored
commit 663deb47 upstream. In preparation of not locking at all for certain buffers depending on if there's contention, make locking optional depending on the initialization of the prz. Signed-off-by:
Joel Fernandes <joelaf@google.com> [kees: moved locking flag into prz instead of via caller arguments] Signed-off-by:
-
Andrzej Hajda authored
commit a2370ba2 upstream. Bool values should be negated using logical operators. Using bitwise operators results in unexpected and possibly incorrect results. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Al Viro authored
commit 49d31c2f upstream. take_dentry_name_snapshot() takes a safe snapshot of dentry name; if the name is a short one, it gets copied into caller-supplied structure, otherwise an extra reference to external name is grabbed (those are never modified). In either case the pointer to stable string is stored into the same structure. dentry must be held by the caller of take_dentry_name_snapshot(), but may be freely dropped afterwards - the snapshot will stay until destroyed by release_dentry_name_snapshot(). Intended use: struct name_snapshot s; take_dentry_name_snapshot(&s, dentry); ... access s.name ... release_dentry_name_snapshot(&s); Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name to pass down with event. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Valentin Vidic authored
commit 860f01e9 upstream. systemd by default starts watchdog on reboot and sets the timer to ShutdownWatchdogSec=10min. Reboot handler in ipmi_watchdog than reduces the timer to 120s which is not enough time to boot a Xen machine with a lot of RAM. As a result the machine is rebooted the second time during the long run of (XEN) Scrubbing Free RAM..... Fix this by setting the timer to 120s only if it was previously set to a low value. Signed-off-by:
Valentin Vidic <Valentin.Vidic@CARNet.hr> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Ismail, Mustafa authored
commit 5a7a88f1 upstream. The port number is only valid if IB_QP_PORT is set in the mask. So only check port number if it is valid to prevent modify_qp from failing due to an invalid port number. Fixes: 5ecce4c9("Check port number supplied by user verbs cmds") Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Tested-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 96b77745 upstream. Commit: 2f5177f0 ("sched/cgroup: Fix/cleanup cgroup teardown/init") .. moved sched_online_group() from css_online() to css_alloc(). It exposes half-baked task group into global lists before initializing generic cgroup stuff. LTP testcase (third in cgroup_regression_test) written for testing similar race in kernels 2.6.26-2.6.28 easily triggers this oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: kernfs_path_from_node_locked+0x260/0x320 CPU: 1 PID: 30346 Comm: cat Not tainted 4.10.0-rc5-test #4 Call Trace: ? kernfs_path_from_node+0x4f/0x60 kernfs_path_from_node+0x3e/0x60 print_rt_rq+0x44/0x2b0 print_rt_stats+0x7a/0xd0 print_cpu+0x2fc/0xe80 ? __might_sleep+0x4a/0x80 sched_debug_show+0x17/0x30 seq_read+0xf2/0x3b0 proc_reg_read+0x42/0x70 __vfs_read+0x28/0x130 ? security_file_permission+0x9b/0xc0 ? rw_verify_area+0x4e/0xb0 vfs_read+0xa5/0x170 SyS_read+0x46/0xa0 entry_SYSCALL_64_fastpath+0x1e/0xad Here the task group is already linked into the global RCU-protected 'task_groups' list, but the css->cgroup pointer is still NULL. This patch reverts this chunk and moves online back to css_online(). Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2f5177f0 ("sched/cgroup: Fix/cleanup cgroup teardown/init") Link: http://lkml.kernel.org/r/148655324740.424917.5302984537258726349.stgit@buzzSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
Sudeep Holla authored
commit cb710ab1 upstream. We already check if the message is empty before calling the client tx_done callback. Calling completion on a wait event is also invalid if the message is empty. This patch moves the existing empty message check earlier. Fixes: 2b6d83e2 ("mailbox: Introduce framework for mailbox") Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Sudeep Holla authored
commit cc6eeaa3 upstream. If a wait_for_completion_timeout() call returns due to a timeout, complete() can get called after returning from the wait which is incorrect and can cause subsequent transmissions on a channel to fail. Since the wait_for_completion_timeout() sees the completion variable is non-zero caused by the erroneous/spurious complete() call, and it immediately returns without waiting for the time as expected by the client. This patch fixes the issue by skipping complete() call for the timer expiry. Fixes: 2b6d83e2 ("mailbox: Introduce framework for mailbox") Reported-by:
Alexey Klimov <alexey.klimov@arm.com> Signed-off-by:
-
Sudeep Holla authored
commit c61b781e upstream. There exists a race when msg_submit return immediately as there was an active request being processed which may have completed just before it's checked again in mbox_send_message. This will result in return to the caller without waiting in mbox_send_message even when it's blocking Tx. This patch fixes the issue by waiting for the completion always if Tx is in blocking mode. Fixes: 2b6d83e2 ("mailbox: Introduce framework for mailbox") Reported-by:
-
Lior David authored
commit dfb5b098 upstream. When FW crashes with no_fw_recovery option, driver waits for manual recovery with wil->mutex held, this can easily create deadlocks. Fix the problem by moving the wait outside the lock. Signed-off-by:
Lior David <qca_liord@qca.qualcomm.com> Signed-off-by:
Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Michal Kazior authored
commit 18ae68ff upstream. WMI ops wrappers did not properly check for null function pointers for spectral scan. This caused null dereference crash with WMI-TLV based firmware which doesn't implement spectral scan. The crash could be triggered with: ip link set dev wlan0 up echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl The crash looked like this: [ 168.031989] BUG: unable to handle kernel NULL pointer dereference at (null) [ 168.037406] IP: [< (null)>] (null) [ 168.040395] PGD cdd4067 PUD fa0f067 PMD 0 [ 168.043303] Oops: 0010 [#1] SMP [ 168.045377] Modules linked in: ath10k_pci(O) ath10k_core(O) ath mac80211 cfg80211 [last unloaded: cfg80211] [ 168.051560] CPU: 1 PID: 1380 Comm: bash Tainted: G W O 4.8.0 #78 [ 168.054336] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 168.059183] task: ffff88000c460c00 task.stack: ffff88000d4bc000 [ 168.061736] RIP: 0010:[<0000000000000000>] [< (null)>] (null) ... [ 168.100620] Call Trace: [ 168.101910] [<ffffffffa03b9566>] ? ath10k_spectral_scan_config+0x96/0x200 [ath10k_core] [ 168.104871] [<ffffffff811386e2>] ? filemap_fault+0xb2/0x4a0 [ 168.106696] [<ffffffffa03b97e6>] write_file_spec_scan_ctl+0x116/0x280 [ath10k_core] [ 168.109618] [<ffffffff812da3a1>] full_proxy_write+0x51/0x80 [ 168.111443] [<ffffffff811957b8>] __vfs_write+0x28/0x120 [ 168.113090] [<ffffffff812f1a2d>] ? security_file_permission+0x3d/0xc0 [ 168.114932] [<ffffffff8109b912>] ? percpu_down_read+0x12/0x60 [ 168.116680] [<ffffffff811965f8>] vfs_write+0xb8/0x1a0 [ 168.118293] [<ffffffff81197966>] SyS_write+0x46/0xa0 [ 168.119912] [<ffffffff818f2972>] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 168.121737] Code: Bad RIP value. [ 168.123318] RIP [< (null)>] (null) Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Annie Cherkaev authored
commit 9f5af546 upstream. This fixes a potential buffer overflow in isdn_net.c caused by an unbounded strcpy. [ ISDN seems to be effectively unmaintained, and the I4L driver in particular is long deprecated, but in case somebody uses this.. - Linus ] Signed-off-by:
Jiten Thakkar <jitenmt@gmail.com> Signed-off-by:
Annie Cherkaev <annie.cherk@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Jia-Ju Bai authored
commit e8f4ae85 upstream. The driver may sleep under a spin lock, the function call path is: isdn_ppp_mp_receive (acquire the lock) isdn_ppp_mp_reassembly isdn_ppp_push_higher isdn_ppp_decompress isdn_ppp_ccp_reset_trans isdn_ppp_ccp_reset_alloc_state kzalloc(GFP_KERNEL) --> may sleep To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
