- 05 Nov, 2014 40 commits
-
-
Mark authored
commit c66f1c62 upstream. The Iomega Jaz USB Adapter is a SCSI-USB converter cable. The hardware seems to be identical to e.g. the Microtech XpressSCSI, using a Shuttle/ SCM chip set. However its firmware restricts it to only work with Jaz drives. On connecting the cable a message like this appears four times in the log: reset full speed USB device number 4 using uhci_hcd That's non-fatal but the US_FL_SINGLE_LUN quirk fixes it. Signed-off-by:
Mark Knibbs <markk@clara.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Joe Lawrence authored
commit c605f3cd upstream. During surprise device hotplug removal tests, it was observed that hub_events may try to call usb_lock_device on a device that has already been freed. Protect the usb_device by taking out a reference (under the hub_event_lock) when hub_events pulls it off the list, returning the reference after hub_events is finished using it. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Suggested-by: David Bulkow <david.bulkow@stratus.com> for using kref Suggested-by: Alan Stern <stern@rowland.harvard.edu> for placement Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
John Sung authored
commit a80d8b02 upstream. When running a 32-bit inputattach utility in a 64-bit system, there will be error code "inputattach: can't set device type". This is caused by the serport device driver not supporting compat_ioctl, so that SPIOCSTYPE ioctl fails. Signed-off-by:
John Sung <penmount.touch@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit c27a3e4d upstream. We hard code cephx auth ticket buffer size to 256 bytes. This isn't enough for any moderate setups and, in case tickets themselves are not encrypted, leads to buffer overflows (ceph_x_decrypt() errors out, but ceph_decode_copy() doesn't - it's just a memcpy() wrapper). Since the buffer is allocated dynamically anyway, allocated it a bit later, at the point where we know how much is going to be needed. Fixes: http://tracker.ceph.com/issues/8979Signed-off-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 597cda35 upstream. Add a helper for processing individual cephx auth tickets. Needed for the next commit, which deals with allocating ticket buffers. (Most of the diff here is whitespace - view with git diff -b). Signed-off-by:
-
Sage Weil authored
commit 73c3d481 upstream. We preallocate a few of the message types we get back from the mon. If we get a larger message than we are expecting, fall back to trying to allocate a new one instead of blindly using the one we have. Signed-off-by:
-
Ilya Dryomov authored
commit 3cea4c30 upstream. Rename front_max field of struct ceph_msg to front_alloc_len to make its purpose more clear. Signed-off-by:
Sage Weil <sage@inktank.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Dmitry Torokhov authored
commit 5715fc76 upstream. ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of physical buttons, instead they generate primary button click when user presses somewhat hard on the surface of the touchpad. Unfortunately they also report primary button click whenever there are 2 or more contacts on the pad, messing up all multi-finger gestures (2-finger scrolling, multi-finger tapping, etc). To cope with this behavior we introduce a delay (currently 50 msecs) in reporting primary press in case more contacts appear. Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Cong Wang authored
commit 3577af70 upstream. We saw a kernel soft lockup in perf_remove_from_context(), it looks like the `perf` process, when exiting, could not go out of the retry loop. Meanwhile, the target process was forking a child. So either the target process should execute the smp function call to deactive the event (if it was running) or it should do a context switch which deactives the event. It seems we optimize out a context switch in perf_event_context_sched_out(), and what's more important, we still test an obsolete task pointer when retrying, so no one actually would deactive that event in this situation. Fix it directly by reloading the task pointer in perf_remove_from_context(). This should cure the above soft lockup. Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1409696840-843-1-git-send-email-xiyou.wangcong@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Thomas Pugliese authored
commit 675f0ab2 upstream. Make sure the uwb_dev->bce entry is set before calling uwb_dev_add in uwbd_dev_onair so that usermode will only see the device after it is properly initialized. This fixes a kernel panic that can occur if usermode tries to access the IEs sysfs attribute of a UWB device before the driver has had a chance to set the beacon cache entry. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
-
Taylor Braun-Jones authored
commit 9c491c37 upstream. Signed-off-by:
Taylor Braun-Jones <taylor.braun-jones@ge.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 271329b3 upstream. Adjust Elantech signature validation to account fo rnewer models of touchpads. Reported-and-tested-by:
Màrius Monton <marius.monton@gmail.com> Signed-off-by:
-
Felipe Balbi authored
commit 96908589 upstream. Commit 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) implemented a workaround for a known issue with Texas Instruments' USB 3.0 redriver IC but it left a condition where any xHCI host would be taken out of reset if port was placed in compliance mode and there was no device connected to the port. That condition would trigger a fake connection to a non-existent device so that usbcore would trigger a warm reset of the port, thus taking the link out of reset. This has the side-effect of preventing any xHCI host connected to a Linux machine from starting and running the USB 3.0 Electrical Compliance Suite because the port will mysteriously taken out of compliance mode and, thus, xHCI won't step through the necessary compliance patterns for link validation. This patch fixes the issue by just adding a missing check for XHCI_COMP_MODE_QUIRK inside xhci_hub_report_usb3_link_state() when PORT_CAS isn't set. This patch should be backported to all kernels containing commit 71c731a2. Fixes: 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) Cc: Alexis R. Cortes <alexis.cortes@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Alex Deucher authored
commit 1952f24d upstream. Vbios connector table lists non-existent VGA port. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=83184Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Murali Karicheri authored
commit c5edfff9 upstream. Keystone K2E EVM uses Marvel 0x9182 controller. This requires support for the ID in the ahci driver. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Felipe Balbi authored
commit fed33afc upstream. Currently, we disable pm_runtime before all register accesses are done, this is dangerous and might lead to abort exceptions due to the driver trying to access a register which is clocked by a clock which was long gated. Fix that by moving pm_runtime_put_sync() and pm_runtime_disable() as the last thing we do before returning from our ->remove() method. Fixes: 72246da4 (usb: Introduce DesignWare USB3 DRD Driver) Signed-off-by:
-
Felipe Balbi authored
commit 16b972a5 upstream. We are going to disable runtime_pm and we're removing the driver, we must disable the device now. Signed-off-by:
-
Jiri Kosina authored
commit 6726655d upstream. There is a following AB-BA dependency between cpu_hotplug.lock and cpuidle_lock: 1) cpu_hotplug.lock -> cpuidle_lock enable_nonboot_cpus() _cpu_up() cpu_hotplug_begin() LOCK(cpu_hotplug.lock) cpu_notify() ... acpi_processor_hotplug() cpuidle_pause_and_lock() LOCK(cpuidle_lock) 2) cpuidle_lock -> cpu_hotplug.lock acpi_os_execute_deferred() workqueue ... acpi_processor_cst_has_changed() cpuidle_pause_and_lock() LOCK(cpuidle_lock) get_online_cpus() LOCK(cpu_hotplug.lock) Fix this by reversing the order acpi_processor_cst_has_changed() does thigs -- let it first execute the protection against CPU hotplug by calling get_online_cpus() and obtain the cpuidle lock only after that (and perform the symmentric change when allowing CPUs hotplug again and dropping cpuidle lock). Spotted by lockdep. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Keith Busch authored
commit 2da78092 upstream. Releases the dev_t minor when all references are closed to prevent another device from acquiring the same major/minor. Since the partition's release may be invoked from call_rcu's soft-irq context, the ext_dev_idr's mutex had to be replaced with a spinlock so as not so sleep. Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@fb.com> [bwh: Backported to 3.2: - Adjust filename - idr insertion API is different, and blk_alloc_devt() is preallocating a node in a different way] Signed-off-by:
-
Jeff Moyer authored
commit 2ff396be upstream. We ran into a case on ppc64 running mariadb where io_getevents would return zeroed out I/O events. After adding instrumentation, it became clear that there was some missing synchronization between reading the tail pointer and the events themselves. This small patch fixes the problem in testing. Thanks to Zach for helping to look into this, and suggesting the fix. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by:
-
Ross Lagerwall authored
commit 61a734d3 upstream. Always freeze processes when suspending and thaw processes when resuming to prevent a race noticeable with HVM guests. This prevents a deadlock where the khubd kthread (which is designed to be freezable) acquires a usb device lock and then tries to allocate memory which requires the disk which hasn't been resumed yet. Meanwhile, the xenwatch thread deadlocks waiting for the usb device lock. Freezing processes fixes this because the khubd thread is only thawed after the xenwatch thread finishes resuming all the devices. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Takashi Iwai authored
commit acf08081 upstream. ALC1150 codec seems to need the COEF- and PLL-setups just like its compatible ALC882 codec. Some machines (e.g. SunMicro X10SAT) show the problem like too low output volumes unless the COEF setup is applied. Reported-and-tested-by:
Dana Goyette <danagoyette@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Thomas Hellstrom authored
commit f01ea0c3 upstream. The code waiting for fifo idle was incorrect and could possibly spin forever under certain circumstances. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reported-by:
Mark Sheldon <markshel@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Reivewed-by:
-
Bjørn Mork authored
commit 5b3da692 upstream. This VID:PID is used for some Direct IP devices behaving identical to the already supported 0F3D:68AA devices. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Bjørn Mork authored
commit 049255f5 upstream. Sierra Wireless Direct IP devices using the 68A3 product ID can be configured for modes including a CDC ECM class function. The known example uses interface numbers 12 and 13 for the ECM control and data interfaces respectively, consistent with CDC MBIM function interface numbering on other Sierra devices. It seems cleaner to restrict this driver to the ff/ff/ff vendor specific interfaces rather than increasing the already long interface number blacklist. This should be more future proof if Sierra adds more class functions using interface numbers not yet in the blacklist. Signed-off-by:
-
Johan Hovold authored
commit ee444609 upstream. Add device id for NOVITUS Bono E thermal printer. Reported-by:
Emanuel Koczwara <poczta@emanuelkoczwara.pl> Signed-off-by:
-
Emmanuel Grumbach authored
commit f47f46d7 upstream. This reverts commit 43d826ca. This commit caused packet loss. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> [bwh: Backported to 3.2: - Adjust filename - Condition for RXON_FLG_SELF_CTS_EN in iwlagn_commit_rxon() was different] Signed-off-by:
-
James Ralston authored
commit 6cad1376 upstream. This patch adds the IDE mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
James Ralston authored
commit 1b071a09 upstream. This patch adds the AHCI mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by:
-
Mathias Krause authored
commit bbe1c274 upstream. The __init annotations for the DMI callback functions are wrong as this code can be called even after the module has been initialized, e.g. like this: # echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove # modprobe i915 # echo 1 > /sys/bus/pci/rescan The first command will remove the PCI device from the kernel's device list so the second command won't see it right away. But as it registers a PCI driver it'll see it on the third command. If the system happens to match one of the DMI table entries we'll try to call a function in long released memory and generate an Oops, at best. Fix this by removing the bogus annotation. Modpost should have caught that one but it ignores section reference mismatches from the .rodata section. :/ Fixes: 25e341cf ("drm/i915: quirk away broken OpRegion VBT") Fixes: 8ca4013d ("CHROMIUM: i915: Add DMI override to skip CRT...") Fixes: 425d244c ("drm/i915: ignore LVDS on intel graphics systems...") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jarod Wilson <jarod@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> # Can modpost be fixed? Signed-off-by:
Jani Nikula <jani.nikula@intel.com> [bwh: Backported to 3.2: drop inapplicable change in intel_crt.c] Signed-off-by:
-
Mark Brown authored
commit 5844a8b9 upstream. A previous over-zealous factorisation of code means that we only treat registers as volatile if they are readable. For most devices this is fine since normally most registers can be read and volatility implies readability but for format_write() devices where there is no readback from the hardware and we use volatility to mean simply uncacheability this means that we end up treating all registers as cacheble. A bigger refactoring of the code to clarify this is in order but as a fix make a minimal change and only check readability when checking volatility if there is no format_write() operation defined for the device. Signed-off-by:
Mark Brown <broonie@linaro.org> Tested-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Wolfram Sang authored
commit 4191f197 upstream. Using .format_write means, we have a custom function to write to the chip, but not to read back. Also, mark registers as "not precious" and "not volatile" which is implicit because we cannot read them. Make those functions use 'regmap_readable' to reuse the checks done there. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Aurelien Jarno authored
commit 29593fd5 upstream. Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c) moved the string related functions into a separate file, which might cause the following build error, depending on the configuration: | CC arch/mips/boot/compressed/decompress.o | In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0, | from linux/arch/mips/boot/compressed/decompress.c:67: | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp': | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration] | cc1: some warnings being treated as errors | linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed | make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1 | linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed It does not fail with the standard configuration, as when CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in include/linux/dynamic_debug.h. There might be other ways for it to get indirectly included. We can't add the include directly in xz_dec_stream.c as some architectures might want to use a different version for the boot/ directory (see for example arch/x86/boot/string.h). Signed-off-by:
Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7420/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Larry Finger authored
commit c6651716 upstream. The Sitecom WLA-2102 adapter uses this driver. Reported-by:
Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Christian Borntraeger authored
commit 614a80e4 upstream. In the early days, we had some special handling for the KVM_EXIT_S390_SIEIC exit, but this was gone in 2009 with commit d7b0b5eb (KVM: s390: Make psw available on all exits, not just a subset). Now this switch statement is just a sanity check for userspace not messing with the kvm_run structure. Unfortunately, this allows userspace to trigger a kernel BUG. Let's just remove this switch statement. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
Alban Crequy authored
' commit 71b1fb5c upstream. /proc/<pid>/cgroup contains one cgroup path on each line. If cgroup names are allowed to contain "\n", applications cannot parse /proc/<pid>/cgroup safely. Signed-off-by:
Alban Crequy <alban.crequy@collabora.co.uk> Signed-off-by:
-
Honggang Li authored
commit 3189eddb upstream. Currently, only SMP system free the percpu allocation info. Uniprocessor system should free it too. For example, one x86 UML virtual machine with 256MB memory, UML kernel wastes one page memory. Signed-off-by:
Honggang Li <enjoymindful@gmail.com> Signed-off-by:
-
Tejun Heo authored
commit 849f5169 upstream. If pcpu_map_pages() fails midway, it unmaps the already mapped pages. Currently, it doesn't flush tlb after the partial unmapping. This may be okay in most cases as the established mapping hasn't been used at that point but it can go wrong and when it goes wrong it'd be extremely difficult to track down. Flush tlb after the partial unmapping. Signed-off-by:
-
Tejun Heo authored
commit f0d27965 upstream. When pcpu_alloc_pages() fails midway, pcpu_free_pages() is invoked to free what has already been allocated. The invocation is across the whole requested range and pcpu_free_pages() will try to free all non-NULL pages; unfortunately, this is incorrect as pcpu_get_pages_and_bitmap(), unlike what its comment suggests, doesn't clear the pages array and thus the array may have entries from the previous invocations making the partial failure path free incorrect pages. Fix it by open-coding the partial freeing of the already allocated pages. Signed-off-by:
-
Eliad Peller authored
commit a5fe8e76 upstream. alpha2 is defined as 2-chars array, but is used in multiple places as string (e.g. with nla_put_string calls), which might leak kernel data. Solve it by simply adding an extra char for the NULL terminator, making such operations safe. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
