The D-Link DIR-685 had its clock polarity set as active
low using the special SPI "spi-cpol" property.

This is not correct: the datasheet clearly states:
"Fix SCL to GND level when not in use" which is
indicative that this line is active high.

After a recent fix making the GPIO-based SPI driver
force the clock line de-asserted at the beginning of
each SPI transaction this reared its ugly head: now
de-asserted was taken to mean the line should be
driven high, but it should be driven low.

Fix this up in the DTS file and the display works again.

Link: https://lore.kernel.org/r/20190915135444.11066-1-linus.walleij@linaro.org
Cc: Mark Brown <broonie@kernel.org>
Fixes: 2922d1cc ("spi: gpio: Add SPI_MASTER_GPIO_SS flag")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* aspeed/dt-3:
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  clk: Add support for AST2600 SoC
  clk: aspeed: Move structures to header
  clk: aspeed: Add SDIO gate

Add them in their own dtsi and include it in aspeed-g6.dtsi to isolate
the cruft.

Link: https://lore.kernel.org/r/20190911165614.31641-2-joel@jms.id.auSigned-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The AST2600 is a new SoC by ASPEED. It contains a dual core Cortex A7
CPU and shares many periperhals with the existing AST2400 and AST2500.

Link: https://lore.kernel.org/r/20190911165614.31641-1-joel@jms.id.auReviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The clk/aspeed branch gets merged through the clk
maintainers, pulling it in as a prerequisite for
the aspeed G6 DT files.

* clk/aspeed:
  clk: Add support for AST2600 SoC
  clk: aspeed: Move structures to header
  clk: aspeed: Add SDIO gate
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-soc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/late

Samsung mach/soc changes for v5.4, part 2

1. Fix system restart on S3C6410 due to missing match of watchdog,
2. Enable suppor for ARM architected timers on Exynos.

* tag 'samsung-soc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos: Enable support for ARM architected timers
  ARM: samsung: Fix system restart on S3C6410
  MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers
  ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c
  ARM: exynos: Enable exynos-chipid driver
  ARM: samsung: Include GPIO driver header

Link: https://lore.kernel.org/r/20190911183632.4317-2-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

ARM architected timer can be used together with Exynos MultiCore Timer
driver, so enable support for it. Support for ARM architected timers is
essential for enabling proper KVM support.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

S3C6410 system restart is triggered by watchdog reset.

Cc: <stable@vger.kernel.org>
Fixes: 9f55342c ("ARM: dts: s3c64xx: Fix infinite interrupt in soft mode")
Signed-off-by: Lihua Yao <ylhuajnu@outlook.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

This is a fairly complete description of an OLPC XO 1.75 laptop.
What's missing for now is the GPU, LCD controller, DCON, the panel and
audio.

The machine is booted with OpenFirmware and thus has a devicetree.
However, older versions are unable to create a valid FDT and don't
follow the Linux bindings. Having an device tree in the kernel tree
makes it easier to use mainline kernels on such machines, test changes
with CONFIG_ARM_APPENDED_DTB and give a good reference on what bindings
are used on the machine without an access to one.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

This device is not an OTG phy, it's a regular USB HS phy. Follow the
generic node name recommendation, and rename it to "usb-phy".
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

This makes the 8250_of driver happy. There are two more drivers in the
tree that bind to mrvl,mmp-uart compatibles: pxa and 8250_pxa and
neither of them requires the reg-shift property, assuming it's always 2.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

Supported by the mmp-camera driver.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

The SPI bus has a single address cell and not size cells.

Also, dtc thinks the SPI nodes are preferrably called "spi" and it is
right to think so.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

A missing space before a curly brace.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

The ast2600 is a new BMC SoC from ASPEED. It contains many more clocks
than the previous iterations, so support is broken out into it's own
driver.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lkml.kernel.org/r/20190825141848.17346-3-joel@jms.id.au
[sboyd@kernel.org: Mark arrays const]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

They will be reused by the ast2600 driver.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lkml.kernel.org/r/20190825141848.17346-2-joel@jms.id.auSigned-off-by: Stephen Boyd <sboyd@kernel.org>

mvebu dt64 for 5.4 (part 2)

Add support for Turris Mox board (Armada 3720 SoC based)

* tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu: (53 commits)
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
  arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply
  arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes
  arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes
  arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes
  arm64: dts: marvell: Add CP110 COMPHY clocks
  arm64: dts: marvell: armada-37xx: add mailbox node
  dt-bindings: gpio: Document GPIOs via Moxtet bus
  drivers: gpio: Add support for GPIOs over Moxtet bus
  bus: moxtet: Add sysfs and debugfs documentation
  dt-bindings: bus: Document moxtet bus binding
  bus: Add support for Moxtet bus
  reset: Add support for resets provided by SCMI
  firmware: arm_scmi: Add RESET protocol in SCMI v2.0
  dt-bindings: arm: Extend SCMI to support new reset protocol
  firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol
  firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels
  ...

Link: https://lore.kernel.org/r/87h85two0r.fsf@FE-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-soc-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/late

Texas Instruments K3 SoC family changes for 5.4

- Typo fixes for gic-its unit addresses for both am654 and j721e
- HW spinlock nodes added for both am654 and j721e
- GPIO support for j721e
- power-domain cells update for both am654 / j721e for exclusive only
  access

* tag 'ti-k3-soc-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-j721e-main: Add hwspinlock node
  arm64: dts: ti: k3-am65-main: Add hwspinlock node
  arm64: dts: k3-j721e: Add gpio-keys on common processor board
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
  arm64: dts: ti: k3-j721e-common-proc-board: Disable unused gpio modules
  arm64: dts: ti: k3-j721e: Add gpio nodes in wakeup domain
  arm64: dts: ti: k3-j721e: Add gpio nodes in main domain
  arm64: dts: ti: k3-j721e: Update the power domain cells
  arm64: dts: ti: k3-am654: Update the power domain cells
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests

Link: https://lore.kernel.org/r/b838d666-ab3b-7d41-67d4-09d606c732da@ti.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.4/ti-sysc-sgx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

SoC glue layer changes for SGX on omap variants for v5.4

For a while we've had omap4 sgx glue layer defined in dts and probed
with ti-sysc driver. This allows idling the sgx module for PM, and
removes the need for custom platform glue layer code for any further
driver changes.

We first drop the unused legacy platform data for omap4 sgx. Then for
omap5, we need add the missing clkctrl clock data so we can configure
sgx. And we configure sgx for omap34xx, omap36xx and am3517.

For am335x, we still have a dependency for rstctrl reset driver changes,
so that will be added later on.

Note that this branch is based on earlier ti-sysc branch for omap36xx
glue layer quirk handling.

* tag 'omap-for-v5.4/ti-sysc-sgx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: ARM: dts: Configure interconnect target module for am3517sgx
  ARM: dts: Configure interconnect target module for omap3 sgx
  ARM: dts: Configure sgx for omap5
  clk: ti: add clkctrl data omap5 sgx
  ARM: OMAP2+: Drop legacy platform data for omap4 gpu

Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-4Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.4/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

Drop legacy platform data omap variants for v5.4

We can now drop more platform data in favor of dts data for most
devices like cpsw, gpio, i2c, mmc, uart and watchdog.

In general we can do this by dropping legacy "ti,hwmods" custom dts
property, and the platform data assuming the related dts data is correct.
This is best done as single patch as otherwise we'd have to revert two
patches in case of any unexpected issues, and we're just removing data.

Fro cpsw, before we can do this, we need to configure the cpsw mdio clocks
properly in dts though in the first patch. For omap4 i2c, we've already
dropped the platform data earlier, but have been still allocting it
dynamically based on the dts data based on the "ti,hwmods" property, but
that is no longer needed. For d2d, we are missing the dts data, so we
first add it and then drop the platform data.

For dra7, we drop platform data and "ti,hwmods" for mcasp and mcspi.
We've already dropped platform data earlier for gpio, i2c, mmc, and
uart so we just need to drop "ti,hwmods" property for those.

Note that this branch is based on earlier ti-sysc-fixes branch.

* tag 'omap-for-v5.4/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Drop legacy custom hwmods property for dra7 gpio
  ARM: dts: Drop legacy custom hwmods property for dra7 mmc
  ARM: dts: Drop legacy custom hwmods property for dra7 i2c
  ARM: dts: Drop legacy custom hwmods property for dra7 uart
  ARM: OMAP2+: Drop legacy platform data for dra7 mcasp
  ARM: OMAP2+: Drop legacy platform data for dra7 mcspi
  ARM: OMAP2+: Drop legacy platform data for omap4 d2d
  ARM: dts: Configure d2d dts data for omap4
  ARM: OMAP2+: Drop legacy watchdog platform data for omap4
  ARM: dts: Drop custom hwmod property for omap4 i2c
  ARM: OMAP2+: Drop legacy platform data for cpsw on dra7
  ARM: OMAP2+: Drop legacy platform data for cpsw on am3 and am4
  ARM: dts: Add fck for cpsw mdio for omap variants

Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-3Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.4/ti-sysc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

more ti-sysc driver changes for omap variants for v5.4

Few changes mostly to deal with sgx SoC glue quirk for omap36xx that
is needed for the related sgx SoC glue dts branch. The other changes
are to simplify sysc_check_one_child() sysc_check_children() to be void
functions, and detect d2d module when debugging is enabled.

* tag 'omap-for-v5.4/ti-sysc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Detect d2d when debug is enabled
  bus: ti-sysc: Add module enable quirk for SGX on omap36xx
  bus: ti-sysc: Change return types of functions

Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-2Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.4/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

Driver changes for ti-sysc for v5.4

Few changes to prepare for using a reset driver for PRM rstctrl mostly
to deal with the clocks for reset. Then few minor clean-up patches and
SPDX license identifier changes, and add a MAINTAINERs file entry.

* tag 'omap-for-v5.4/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: remove set but not used variable 'quirks'
  bus: ti-sysc: allow reset sharing across devices
  bus: ti-sysc: rework the reset handling
  bus: ti-sysc: re-order the clkdm control around reset handling
  bus: ti-sysc: Add missing kerneldoc comments
  bus: ti-sysc: Switch to SPDX license identifier
  dt-bindings: ti-sysc: Add SPDX license identifier
  MAINTAINERS: Add ti-sysc files under the OMAP2+ entry

Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for reported issues for
  5.3-rc7

  Also included in here is the documentation for how we are handling
  hardware issues under embargo that everyone has finally agreed on, as
  well as a MAINTAINERS update for the suckers who agreed to handle the
  LICENSES/ files.

  All of these have been in linux-next last week with no reported
  issues"

* tag 'char-misc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  fsi: scom: Don't abort operations for minor errors
  vmw_balloon: Fix offline page marking with compaction
  VMCI: Release resource if the work is already queued
  Documentation/process: Embargoed hardware security issues
  lkdtm/bugs: fix build error in lkdtm_EXHAUST_STACK
  mei: me: add Tiger Lake point LP device ID
  intel_th: pci: Add Tiger Lake support
  intel_th: pci: Add support for another Lewisburg PCH
  stm class: Fix a double free of stm_source_device
  MAINTAINERS: add entry for LICENSES and SPDX stuff
  fpga: altera-ps-spi: Fix getting of optional confd gpio

Pull USB fixes from Greg KH:
 "Here are some small USB fixes that have been in linux-next this past
  week for 5.3-rc7

  They fix the usual xhci, syzbot reports, and other small issues that
  have come up last week.

  All have been in linux-next with no reported issues"

* tag 'usb-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: cdc-wdm: fix race between write and disconnect due to flag abuse
  usb: host: xhci: rcar: Fix typo in compatible string matching
  usb: host: xhci-tegra: Set DMA mask correctly
  USB: storage: ums-realtek: Whitelist auto-delink support
  USB: storage: ums-realtek: Update module parameter description for auto_delink_en
  usb: host: ohci: fix a race condition between shutdown and irq
  usb: hcd: use managed device resources
  typec: tcpm: fix a typo in the comparison of pdo_max_voltage
  usb-storage: Add new JMS567 revision to unusual_devs
  usb: chipidea: udc: don't do hardware access if gadget has stopped
  usbtmc: more sanity checking for packet size
  usb: udc: lpc32xx: silence fall-through warning

Pull networking fixes from David Miller:

 1) Fix some length checks during OGM processing in batman-adv, from
    Sven Eckelmann.

 2) Fix regression that caused netfilter conntrack sysctls to not be
    per-netns any more. From Florian Westphal.

 3) Use after free in netpoll, from Feng Sun.

 4) Guard destruction of pfifo_fast per-cpu qdisc stats with
    qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed
    in pfifo_fast_enqueue().

 5) Fix memory leak in mld_del_delrec(), from Eric Dumazet.

 6) Handle neigh events on internal ports correctly in nfp, from John
    Hurley.

 7) Clear SKB timestamp in NF flow table code so that it does not
    confuse fq scheduler. From Florian Westphal.

 8) taprio destroy can crash if it is invoked in a failure path of
    taprio_init(), because the list head isn't setup properly yet and
    the list del is unconditional. Perform the list add earlier to
    address this. From Vladimir Oltean.

 9) Make sure to reapply vlan filters on device up, in aquantia driver.
    From Dmitry Bogdanov.

10) sgiseeq driver releases DMA memory using free_page() instead of
    dma_free_attrs(). From Christophe JAILLET.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
  net: seeq: Fix the function used to release some memory in an error handling path
  enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions
  net: bcmgenet: use ethtool_op_get_ts_info()
  tc-testing: don't hardcode 'ip' in nsPlugin.py
  net: dsa: microchip: add KSZ8563 compatibility string
  dt-bindings: net: dsa: document additional Microchip KSZ8563 switch
  net: aquantia: fix out of memory condition on rx side
  net: aquantia: linkstate irq should be oneshot
  net: aquantia: reapply vlan filters on up
  net: aquantia: fix limit of vlan filters
  net: aquantia: fix removal of vlan 0
  net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate
  taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte
  taprio: Fix kernel panic in taprio_destroy
  net: dsa: microchip: fill regmap_config name
  rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2]
  net: stmmac: dwmac-rk: Don't fail if phy regulator is absent
  amd-xgbe: Fix error path in xgbe_mod_init()
  netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder
  mac80211: Correctly set noencrypt for PAE frames
  ...

In commit 99cd149e ("sgiseeq: replace use of dma_cache_wback_inv"),
a call to 'get_zeroed_page()' has been turned into a call to
'dma_alloc_coherent()'. Only the remove function has been updated to turn
the corresponding 'free_page()' into 'dma_free_attrs()'.
The error hndling path of the probe function has not been updated.

Fix it now.

Rename the corresponding label to something more in line.

Fixes: 99cd149e ("sgiseeq: replace use of dma_cache_wback_inv")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the bogus detection of 32bit user mode for uretprobes which
     caused corruption of the user return address resulting in
     application crashes. In the uprobes handler in_ia32_syscall() is
     obviously always returning false on a 64bit kernel. Use
     user_64bit_mode() instead which works correctly.

   - Prevent large page splitting when ftrace flips RW/RO on the kernel
     text which caused iTLB performance issues. Ftrace wants to be
     converted to text_poke() which avoids the problem, but for now
     allow large page preservation in the static protections check when
     the change request spawns a full large page.

   - Prevent arch_dynirq_lower_bound() from returning 0 when the IOAPIC
     is configured via device tree. In the device tree case the GSI 1:1
     mapping is meaningless therefore the lower bound which protects the
     GSI range on ACPI machines is irrelevant. Return the lower bound
     which the core hands to the function instead of blindly returning 0
     which causes the core to allocate the invalid virtual interupt
     number 0 which in turn prevents all drivers from allocating and
     requesting an interrupt.

   - Remove the bogus initialization of LDR and DFR in the 32bit bigsmp
     APIC driver. That uses physical destination mode where LDR/DFR are
     ignored, but the initialization and the missing clear of LDR caused
     the APIC to be left in a inconsistent state on kexec/reboot.

   - Clear LDR when clearing the APIC registers so the APIC is in a well
     defined state.

   - Initialize variables proper in the find_trampoline_placement()
     code.

   - Silence GCC( build warning for the real mode part of the build"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/cpa: Prevent large page split when ftrace flips RW on kernel text
  x86/build: Add -Wnoaddress-of-packed-member to REALMODE_CFLAGS, to silence GCC9 build warning
  x86/boot/compressed/64: Fix missing initialization in find_trampoline_placement()
  x86/apic: Include the LDR when clearing out APIC registers
  x86/apic: Do not initialize LDR and DFR for bigsmp
  uprobes/x86: Fix detection of 32-bit user mode
  x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines

Pull perf fixes from Thomas Gleixner:
 "Two fixes for perf x86 hardware implementations:

   - Restrict the period on Nehalem machines to prevent perf from
     hogging the CPU

   - Prevent the AMD IBS driver from overwriting the hardwre controlled
     and pre-seeded reserved bits (0-6) in the count register which
     caused a sample bias for dispatched micro-ops"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/ibs: Fix sample bias for dispatched micro-ops
  perf/x86/intel: Restrict period on Nehalem

Pull turbostat updates from Len Brown:
 "User-space turbostat (and x86_energy_perf_policy) patches.

  They are primarily bug fixes from users"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: update version number
  tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL
  tools/power turbostat: Fix caller parameter of get_tdp_amd()
  tools/power turbostat: Fix CPU%C1 display value
  tools/power turbostat: do not enforce 1ms
  tools/power turbostat: read from pipes too
  tools/power turbostat: Add Ice Lake NNPI support
  tools/power turbostat: rename has_hsw_msrs()
  tools/power turbostat: Fix Haswell Core systems
  tools/power turbostat: add Jacobsville support
  tools/power turbostat: fix buffer overrun
  tools/power turbostat: fix file descriptor leaks
  tools/power turbostat: fix leak of file descriptor on error return path
  tools/power turbostat: Make interval calculation per thread to reduce jitter
  tools/power turbostat: remove duplicate pc10 column
  tools/power x86_energy_perf_policy: Fix argument parsing
  tools/power: Fix typo in man page
  tools/power/x86: Enable compiler optimisations and Fortify by default
  tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2

Call to 'pci_free_irq_vectors()' are missing both in the error handling
path of the probe function, and in the remove function.
Add them.

Fixes: 19971f5e ("enetc: add PTP clock driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change enables the use of SW timestamping on the Raspberry Pi 4.

bcmgenet's transmit function bcmgenet_xmit() implements software
timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was
missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using
ethtool_ops bcmgenet_ethtool_ops() as get_ts_info(), the
SOF_TIMESTAMPING_TX_SOFTWARE capability is announced.

Similar to commit a8f5cb9e ("smsc95xx: use ethtool_op_get_ts_info()")
Signed-off-by: Ryan M. Collins <rmc032@bucknell.edu>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the following tdc test fails on Fedora:

 # ./tdc.py -e 2638
  -- ns/SubPlugin.__init__
 Test 2638: Add matchall and try to get it
 -----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 clsact"
 -----> prepare stage *** Error message: "/bin/sh: ip: command not found"
 returncode 127; expected [0]
 -----> prepare stage *** Aborting test run.

Let nsPlugin.py use the 'IP' variable introduced with commit 92c1a19e
("tc-tests: added path to ip command in tdc"), so that the path to 'ip' is
correctly resolved to the value we have in tdc_config.py.

 # ./tdc.py -e 2638
  -- ns/SubPlugin.__init__
 Test 2638: Add matchall and try to get it
 All test results:
 1..1
 ok 1 2638 - Add matchall and try to get it

Fixes: 489ce2f4 ("tc-testing: Restore original behaviour for namespaces in tdc")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Razvan Stefanescu says:

====================
net: dsa: microchip: add KSZ8563 support

This patchset adds compatibility string for the KSZ8563 switch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Igor Russkikh says:

====================
net: aquantia: fixes on vlan filters and other conditions

Here is a set of various bug fixes related to vlan filter offload and
two other rare cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On embedded environments with hard memory limits it is a normal although
rare case when skb can't be allocated on rx part under high traffic.

In such OOM cases napi_complete_done() was not called.
So the napi object became in an invalid state like it is "scheduled".
Kernel do not re-schedules the poll of that napi object.

Consequently, kernel can not remove that object the system hangs on
`ifconfig down` waiting for a poll.

We are fixing this by gracefully closing napi poll routine with correct
invocation of napi_complete_done.

This was reproduced with artificially failing the allocation of skb to
simulate an "out of memory" error case and check that traffic does
not get stuck.

Fixes: 970a2e98 ("net: ethernet: aquantia: Vector operations")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Declaring threaded irq handler should also indicate the irq is
oneshot. It is oneshot indeed, because HW implements irq automasking
on trigger.

Not declaring this causes some kernel configurations to fail
on interface up, because request_threaded_irq returned an err code.

The issue was originally hidden on normal x86_64 configuration with
latest kernel, because depending on interrupt controller, irq driver
added ONESHOT flag on its own.

Issue was observed on older kernels (4.14) where no such logic exists.

Fixes: 4c83f170 ("net: aquantia: link status irq handling")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reported-by: Michael Symolkin <Michael.Symolkin@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of device reconfiguration the driver may reset the device invisible
for other modules, vlan module in particular. So vlans will not be
removed&created and vlan filters will not be configured in the device.
The patch reapplies the vlan filters at device start.

Fixes: 7975d2af ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>