- 22 Sep, 2015 12 commits
-
-
Alexandre Belloni authored
Commit dca1a4b5 ("clk: at91: keep slow clk enabled to prevent system hang") added a workaround for the slow clock as it is not properly handled by its users. Get and use the slow clock as it is necessary for the at91 reset controller. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Alexandre Belloni authored
It was not possible to compile at91-reset as a module. Implement .remove() to allow it. Also switch to module_platform_driver_probe() as it is not hotpluggable. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Alexandre Belloni authored
Since all the at91 platforms are now DT only, at91_reset_platform_probe() is now useless, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Vaishali Thakkar authored
Use managed resource functions devm_request_threaded_irq and devm_power_supply_register to simplify error handling. To be compatible with the change, various gotos are replaced with direct returns and unneeded labels are dropped. Also, remove pm860x_battery_remove as it is now redundant. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Courtney Cavin authored
Add the Qualcomm Switch-Mode Battery Charger and Boost driver, found in pm8941. Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Courtney Cavin authored
Add the Qualcomm Switch-Mode Battery Charger and Boost device tree binding. Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Javier Martinez Canillas authored
These drivers already have an I2C device id table that is used to create module aliases and the used MODULE_ALIAS() was either already in the I2C table so it was redundant or wasn't a valid I2C id so it was never used. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Milo Kim authored
According to lp8727 bindings[*], charging parameter is optional. So parsing can be skipped in case those properties are undefined. However, 'debounce-ms' should be read prior to checking the properties. Otherwise, 'debounce-ms' property will be ignored even it is configured inside the DT. So, counting child is processed after updating 'debounce-ms'. [*] Documentation/devicetree/bindings/power_supply/lp8727_charger.txt Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Milo Kim authored
Currently, lp8727 charger driver parses the DT and copies values into the 'cl->dev.platform_data' if 'of_node' exists. This may have architectural issue. Platform data is configurable through the DT or I2C board info inside the platform area. However, lp8727 driver changes this configuration when it is loaded. The driver should get data from the platform side and use the private data, 'lp8727_chg->pdata' instead of changing the original platform data. _probe() procedure is changed as follows. 1. lp8727_parse_dt() returns the pointer of lp8727_platform_data. The driver uses this allocated platform data. So it should keep original platform data, 'dev->platform_data'. 2. In _probe(), check the return value of lp8727_parse_dt(). If an error is found, then exit as PTR_ERR(pdata). 3. If 'of_node' is not found, then the driver just gets the platform data from the I2C device structure. 4. Map the platform data to private data structure. Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
This adds a driver for the usb power_supply bits of the axp20x PMICs. I initially started writing my own driver, before coming aware of Bruno Prémont's excellent earlier RFC with a driver for this. My driver was lacking CURRENT_MAX and VOLTAGE_MIN support Bruno's drvier has, so I've copied the code for those from his driver. Note that the AC-power-supply and battery charger bits will need separate drivers. Each one needs its own devictree child-node so that other devicetree nodes can reference the right power-supply, and thus each one will get its own mfd-cell / platform_device and platform-driver. Cc: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
Add binding documentation for the usb power supply part of the AXP20x pmic. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
- 20 Sep, 2015 10 commits
-
-
Linus Torvalds authored
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Three fixes and a resulting cleanup for -rc2: - Andre Przywara reported that he was seeing a warning with the new cast inside DMA_ERROR_CODE's definition, and fixed the incorrect use. - Doug Anderson noticed that kgdb causes a "scheduling while atomic" bug. - OMAP5 folk noticed that their Thumb-2 compiled X servers crashed when enabling support to cover ARMv6 CPUs due to a kernel bug leaking some conditional context into the signal handler" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8425/1: kgdb: Don't try to stop the machine when setting breakpoints ARM: 8437/1: dma-mapping: fix build warning with new DMA_ERROR_CODE definition ARM: get rid of needless #if in signal handling code ARM: fix Thumb2 signal handling when ARMv6 is enabled
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update contains 7 fixes for problems ranging from build failurs to incorrect error reporting" * tag 'linux-kselftest-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: exec: revert to default emit rule selftests: change install command to rsync selftests: mqueue: simplify the Makefile selftests: mqueue: allow extra cflags selftests: rename jump label to static_keys selftests/seccomp: add support for s390 seltests/zram: fix syntax error
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI updates from Rafael Wysocki: "Included are: a somewhat late devfreq update which however is mostly fixes and cleanups with one new thing only (the PPMUv2 support on Exynos5433), an ACPI cpufreq driver fixup and two ACPI core cleanups related to preprocessor directives. Specifics: - Fix a memory allocation size in the devfreq core (Xiaolong Ye). - Fix a mistake in the exynos-ppmu DT binding (Javier Martinez Canillas). - Add support for PPMUv2 ((Platform Performance Monitoring Unit version 2.0) on the Exynos5433 SoCs (Chanwoo Choi). - Fix a type casting bug in the Exynos PPMU code (MyungJoo Ham). - Assorted devfreq code cleanups and optimizations (Javi Merino, MyungJoo Ham, Viresh Kumar). - Fix up the ACPI cpufreq driver to use a more lightweight way to get to its private data in the ->get() callback (Rafael J Wysocki). - Fix a CONFIG_ prefix bug in one of the ACPI drivers and make the ACPI subsystem use IS_ENABLED() instead of #ifdefs in function bodies (Sudeep Holla)" * tag 'pm+acpi-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: acpi-cpufreq: Use cpufreq_cpu_get_raw() in ->get() ACPI: Eliminate CONFIG_.*{, _MODULE} #ifdef in favor of IS_ENABLED() ACPI: int340x_thermal: add missing CONFIG_ prefix PM / devfreq: Fix incorrect type issue. PM / devfreq: tegra: Update governor to use devfreq_update_stats() PM / devfreq: comments for get_dev_status usage updated PM / devfreq: drop comment about thermal setting max_freq PM / devfreq: cache the last call to get_dev_status() PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL) PM / devfreq: exynos-ppmu: bit-wise operation bugfix. PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2 PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433 PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A few driver fixes for tegra, rockchip, and st SoCs and a two-liner in the framework to avoid oops when get_parent ops return out of range values on tegra platforms" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: drivers: clk: st: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x clk: check for invalid parent index of orphans in __clk_init() clk: tegra: dfll: Properly protect OPP list clk: rockchip: add critical clock for rk3368
-
Linus Torvalds authored
Merge tag 'led-fixes-for-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: - fix module autoload for six OF platform drivers (aat1290, bcm6328, bcm6358, ktd2692, max77693, ns2) - aat1290: add missing static modifier - ipaq-micro: add missing LEDS_CLASS dependency - lp55xx: correct Kconfig dependecy for f/w user helper * tag 'led-fixes-for-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds:lp55xx: Correct Kconfig dependency for f/w user helper leds: leds-ipaq-micro: Add LEDS_CLASS dependency leds: aat1290: add 'static' modifier to init_mm_current_scale leds: leds-ns2: Fix module autoload for OF platform driver leds: max77693: Fix module autoload for OF platform driver leds: ktd2692: Fix module autoload for OF platform driver leds: bcm6358: Fix module autoload for OF platform driver leds: bcm6328: Fix module autoload for OF platform driver leds: aat1290: Fix module autoload for OF platform driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "The new hfi1 driver in staging/rdma has had a number of fixup patches since being added to the tree. This is the first batch of those fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/hfi: Properly set permissions for user device files IB/hfi1: mask vs shift confusion IB/hfi1: clean up some defines IB/hfi1: info leak in get_ctxt_info() IB/hfi1: fix a locking bug IB/hfi1: checking for NULL instead of IS_ERR IB/hfi1: fix sdma_descq_cnt parameter parsing IB/hfi1: fix copy_to/from_user() error handling IB/hfi1: fix pstateinfo from returning improperly byteswapped value
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: - a boot regression (since v4.2) fix for some ARM configurations from Tyler - regression (since v4.1) fixes for mkfs.xfs on a DAX enabled device from Jeff. These are tagged for -stable. - a pair of locking fixes from Axel that are hidden from lockdep since they involve device_lock(). The "btt" one is tagged for -stable, the other only applies to the new "pfn" mechanism in v4.3. - a fix for the pmem ->rw_page() path to use wmb_pmem() from Ross. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: mm: fix type cast in __pfn_to_phys() pmem: add proper fencing to pmem_rw_page() libnvdimm: pfn_devs: Fix locking in namespace_store libnvdimm: btt_devs: Fix locking in namespace_store blockdev: don't set S_DAX for misaligned partitions dax: fix O_DIRECT I/O to the last block of a blockdev
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block updates from Jens Axboe: "This is a bit bigger than it should be, but I could (did) not want to send it off last week due to both wanting extra testing, and expecting a fix for the bounce regression as well. In any case, this contains: - Fix for the blk-merge.c compilation warning on gcc 5.x from me. - A set of back/front SG gap merge fixes, from me and from Sagi. This ensures that we honor SG gapping for integrity payloads as well. - Two small fixes for null_blk from Matias, fixing a leak and a capacity propagation issue. - A blkcg fix from Tejun, fixing a NULL dereference. - A fast clone optimization from Ming, fixing a performance regression since the arbitrarily sized bio's were introduced. - Also from Ming, a regression fix for bouncing IOs" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix bounce_end_io block: blk-merge: fast-clone bio when splitting rw bios block: blkg_destroy_all() should clear q->root_blkg and ->root_rl.blkg block: Copy a user iovec if it includes gaps block: Refuse adding appending a gapped integrity page to a bio block: Refuse request/bio merges with gaps in the integrity payload block: Check for gaps on front and back merges null_blk: fix wrong capacity when bs is not 512 bytes null_blk: fix memory leak on cleanup block: fix bogus compiler warnings in blk-merge.c
-
Chris Mason authored
Commit 505a666e ("writeback: plug writeback in wb_writeback() and writeback_inodes_wb()") has us holding a plug during writeback_sb_inodes, which increases the merge rate when relatively contiguous small files are written by the filesystem. It helps both on flash and spindles. For an fs_mark workload creating 4K files in parallel across 8 drives, this commit improves performance ~9% more by unplugging before calling cond_resched(). cond_resched() doesn't trigger an implicit unplug, so explicitly getting the IO down to the device before scheduling reduces latencies for anyone waiting on clean pages. It also cuts down on how often we use kblockd to unplug, which means less work bouncing from one workqueue to another. Many more details about how we got here: https://lkml.org/lkml/2015/9/11/570Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 19 Sep, 2015 1 commit
-
-
Tyler Baker authored
The various definitions of __pfn_to_phys() have been consolidated to use a generic macro in include/asm-generic/memory_model.h. This hit mainline in the form of 012dcef3 "mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h". When the generic macro was implemented the type cast to phys_addr_t was dropped which caused boot regressions on ARM platforms with more than 4GB of memory and LPAE enabled. It was suggested to use PFN_PHYS() defined in include/linux/pfn.h as provides the correct logic and avoids further duplication. Reported-by: kernelci.org bot <bot@kernelci.org> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
- 18 Sep, 2015 17 commits
-
-
Rafael J. Wysocki authored
* acpi-bus: ACPI: Eliminate CONFIG_.*{, _MODULE} #ifdef in favor of IS_ENABLED() ACPI: int340x_thermal: add missing CONFIG_ prefix
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: acpi-cpufreq: Use cpufreq_cpu_get_raw() in ->get() * pm-devfreq: PM / devfreq: Fix incorrect type issue. PM / devfreq: tegra: Update governor to use devfreq_update_stats() PM / devfreq: comments for get_dev_status usage updated PM / devfreq: drop comment about thermal setting max_freq PM / devfreq: cache the last call to get_dev_status() PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL) PM / devfreq: exynos-ppmu: bit-wise operation bugfix. PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2 PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433 PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fixes and cleanups from Michael Tsirkin: "This fixes the virtio-test tool, and improves the error handling for virtio-ccw" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: handle failures of READ_VQ_CONF ccw tools/virtio: propagate V=X to kernel build vhost: move features to core tools/virtio: fix build after 4.2 changes
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Mostly stable material, a lot of ARM fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits) sched: access local runqueue directly in single_task_running arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS' arm64: KVM: Remove all traces of the ThumbEE registers arm: KVM: Disable virtual timer even if the guest is not using it arm64: KVM: Disable virtual timer even if the guest is not using it arm/arm64: KVM: vgic: Check for !irqchip_in_kernel() when mapping resources KVM: s390: Replace incorrect atomic_or with atomic_andnot arm: KVM: Fix incorrect device to IPA mapping arm64: KVM: Fix user access for debug registers KVM: vmx: fix VPID is 0000H in non-root operation KVM: add halt_attempted_poll to VCPU stats kvm: fix zero length mmio searching kvm: fix double free for fast mmio eventfd kvm: factor out core eventfd assign/deassign logic kvm: don't try to register to KVM_FAST_MMIO_BUS for non mmio eventfd KVM: make the declaration of functions within 80 characters KVM: arm64: add workaround for Cortex-A57 erratum #852523 KVM: fix polling for guest halt continued even if disable it arm/arm64: KVM: Fix PSCI affinity info return value for non valid cores arm64: KVM: set {v,}TCR_EL2 RES1 bits ...
-
Ira Weiny authored
Some of the device files are required to be user accessible for PSM while most should remain accessible only by root. Add a parameter to hfi1_cdev_init which controls if the user should have access to this device which places it in a different class with the appropriate devnode callback. In addition set the devnode call back for the existing class to be a bit more explicit for those permissions. Finally remove the unnecessary null check before class_destroy Tested-by: Donald Dutile <ddutile@redhat.com> Signed-off-by: Haralanov, Mitko (mitko.haralanov@intel.com) Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dan Carpenter authored
We are shifting by the _MASK macros instead of the _SHIFT ones. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dan Carpenter authored
I added spaces around operators so it matches kernel style because normally "-1ULL" is a number and " - 1" is a subtract operation. Also removed some superflous "ULL" types so "1ULL" becomes "1". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dan Carpenter authored
The cinfo struct has a hole after the last struct member so we need to zero it out. Otherwise we disclose some uninitialized stack data. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dan Carpenter authored
mutex_trylock() returns zero on failure, not EBUSY. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dan Carpenter authored
__get_txreq() returns an ERR_PTR() but this checks for NULL so it would oops on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Mike Marciniszyn authored
The boolean tests should have been or-ed. Reported-by: David Binderman <dcb314@hotmail.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dan Carpenter authored
copy_to/from_user() returns the number of bytes which we were not able to copy. It doesn't return an error code. Also a couple places had a printk() on error and I removed that because people can take advantage of it to fill /var/log/messages with spam. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Ira Weiny authored
Byteswap link_width_downgrade_*_active values before sending on the wire. In addition properly define the Port State Info structure. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Christian Gomez <christian.gomez@intel.com> Signed-off-by: Rimmer, Todd <todd.rimmer@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "This is a rather large update post rc1 due to the final steps of cleanups and API changes which had to wait for the preparatory patches to hit your tree. - Regression fixes for ARM GIC irqchips - Regression fixes and lockdep anotations for renesas irq chips - The leftovers of the cleanup and preparatory patches which have been ignored by maintainers - Final conversions of the newly merged users of obsolete APIs - Final removal of obsolete APIs - Final removal of ARM artifacts which had been introduced during the conversion of ARM to the generic interrupt code. - Final split of the irq_data into chip specific and common data to reflect the needs of hierarchical irq domains. - Treewide removal of the first argument of interrupt flow handlers, i.e. the irq number, which is not used by the majority of handlers and simple to retrieve from the other argument the irq descriptor. - A few comment updates and build warning fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) arm64: Remove ununsed set_irq_flags ARM: Remove ununsed set_irq_flags sh: Kill off set_irq_flags usage irqchip: Kill off set_irq_flags usage gpu/drm: Kill off set_irq_flags usage genirq: Remove irq argument from irq flow handlers genirq: Move field 'msi_desc' from irq_data into irq_common_data genirq: Move field 'affinity' from irq_data into irq_common_data genirq: Move field 'handler_data' from irq_data into irq_common_data genirq: Move field 'node' from irq_data into irq_common_data irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag genirq: Provide IRQD_FORWARDED_TO_VCPU status flag genirq: Simplify irq_data_to_desc() genirq: Remove __irq_set_handler_locked() pinctrl/pistachio: Use irq_set_handler_locked gpio: vf610: Use irq_set_handler_locked powerpc/mpc8xx: Use irq_set_handler_locked() powerpc/ipic: Use irq_set_handler_locked() powerpc/cpm2: Use irq_set_handler_locked() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single regression fix for the x86 dma allocator which got wreckaged in the merge window" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci/dma: Fix gfp flags for coherent DMA memory allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix 32-bit TCE table init in kdump kernel from Nish - Fix kdump with non-power-of-2 crashkernel= from Nish - Abort cxl_pci_enable_device_hook() if PCI channel is offline from Andrew - Fix to release DRC when configure_connector() fails from Bharata - Wire up sys_userfaultfd() - Fix race condition in tearing down MSI interrupts from Paul - Fix unbalanced pci_dev_get() in cxl_probe() from Daniel - Fix cxl build failure due to -Wunused-variable gcc behaviour change from Ian - Tell the toolchain to use ABI v2 when building an LE boot wrapper from Benh - Fix THP to recompute hash value after a failed update from Aneesh - 32-bit memcpy/memset: only use dcbz once cache is enabled from Christophe * tag 'powerpc-4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc32: memset: only use dcbz once cache is enabled powerpc32: memcpy: only use dcbz once cache is enabled powerpc/mm: Recompute hash value after a failed update powerpc/boot: Specify ABI v2 when building an LE boot wrapper cxl: Fix build failure due to -Wunused-variable behaviour change cxl: Fix unbalanced pci_dev_get in cxl_probe powerpc/MSI: Fix race condition in tearing down MSI interrupts powerpc: Wire up sys_userfaultfd() powerpc/pseries: Release DRC when configure_connector fails cxl: abort cxl_pci_enable_device_hook() if PCI channel is offline powerpc/powernv/pci-ioda: fix kdump with non-power-of-2 crashkernel= powerpc/powernv/pci-ioda: fix 32-bit TCE table init in kdump kernel
-
Dominik Dingel authored
Commit 2ee507c4 ("sched: Add function single_task_running to let a task check if it is the only task running on a cpu") referenced the current runqueue with the smp_processor_id. When CONFIG_DEBUG_PREEMPT is enabled, that is only allowed if preemption is disabled or the currrent task is bound to the local cpu (e.g. kernel worker). With commit f7819512 ("kvm: add halt_poll_ns module parameter") KVM calls single_task_running. If CONFIG_DEBUG_PREEMPT is enabled that generates a lot of kernel messages. To avoid adding preemption in that cases, as it would limit the usefulness, we change single_task_running to access directly the cpu local runqueue. Cc: Tim Chen <tim.c.chen@linux.intel.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Fixes: 2ee507c4Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-