- 11 Sep, 2019 5 commits
-
-
Vasant Hegde authored
Use "opal-msg-size" device tree property to allocate memory for "opal_msg". Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: s/uint32_t/u32/ and mark opal_msg_size as __ro_after_init] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190826065701.8853-1-hegdevasant@linux.vnet.ibm.com
-
Christoph Hellwig authored
Neither pnv_npu_try_dma_set_bypass() nor the pnv_npu_dma_set_32() and pnv_npu_dma_set_bypass() helpers called by it are used anywhere in the kernel tree, so remove them. mpe: They're unused since 2d6ad41b ("powerpc/powernv: use the generic iommu bypass code") removed the last usage. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Santosh Sivaraj authored
Appropriate self tests for memcpy_mcsafe Suggested-by:
Santosh Sivaraj <santosh@fossix.org> Signed-off-by:
-
Santosh Sivaraj authored
For sizes lesser than 128 bytes, the code branches out early without saving the stack frame, which when restored later drops frame of the caller. Tested-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Segher Boessenkool authored
The setjmp function should be declared as "returns_twice", or bad things can happen[1]. This does not actually change generated code in my testing. The longjmp function should be declared as "noreturn", so that the compiler can optimise calls to it better. This makes the generated code a little shorter. 1: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-returns_005ftwice-function-attributeSigned-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
- 05 Sep, 2019 22 commits
-
-
Jordan Niethe authored
Commit 2874c5fd ("treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152") left an empty comment in machdep.h, as the boilerplate was the only text in the comment. Remove the empty comment. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Signed-off-by:
-
Madhavan Srinivasan authored
Commit <684d9840> ('powerpc/powernv: Add debugfs interface for imc-mode and imc') added debugfs interface for the nest imc pmu devices to support changing of different ucode modes. Primarily adding this capability for debug. But when doing so, the code did not consider the case of cpu-less nodes. So when reading the _cmd_ or _mode_ file of a cpu-less node will create this crash. Faulting instruction address: 0xc0000000000d0d58 Oops: Kernel access of bad area, sig: 11 [#1] ... CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-20190627+ #19 NIP: c0000000000d0d58 LR: c00000000049aa18 CTR:c0000000000d0d50 REGS: c00020194548f9e0 TRAP: 0300 Not tainted (5.2.0-rc6-next-20190627+) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:28022822 XER: 00000000 CFAR: c00000000049aa14 DAR: 000000000003fc08 DSISR:40000000 IRQMASK: 0 ... NIP imc_mem_get+0x8/0x20 LR simple_attr_read+0x118/0x170 Call Trace: simple_attr_read+0x70/0x170 (unreliable) debugfs_attr_read+0x6c/0xb0 __vfs_read+0x3c/0x70 vfs_read+0xbc/0x1a0 ksys_read+0x7c/0x140 system_call+0x5c/0x70 Patch fixes the issue with a more robust check for vbase to NULL. Before patch, ls output for the debugfs imc directory # ls /sys/kernel/debug/powerpc/imc/ imc_cmd_0 imc_cmd_251 imc_cmd_253 imc_cmd_255 imc_mode_0 imc_mode_251 imc_mode_253 imc_mode_255 imc_cmd_250 imc_cmd_252 imc_cmd_254 imc_cmd_8 imc_mode_250 imc_mode_252 imc_mode_254 imc_mode_8 After patch, ls output for the debugfs imc directory # ls /sys/kernel/debug/powerpc/imc/ imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8 Actual bug here is that, we have two loops with potentially different loop counts. That is, in imc_get_mem_addr_nest(), loop count is obtained from the dt entries. But in case of export_imc_mode_and_cmd(), loop was based on for_each_nid() count. Patch fixes the loop count in latter based on the struct mem_info. Ideally it would be better to have array size in struct imc_pmu. Fixes: 684d9840 ('powerpc/powernv: Add debugfs interface for imc-mode and imc') Reported-by:
Qian Cai <cai@lca.pw> Suggested-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
Introduce two options to control the use of the tlbie instruction. A boot time option which completely disables the kernel using the instruction, this is currently incompatible with HASH MMU, KVM, and coherent accelerators. And a debugfs option can be switched at runtime and avoids using tlbie for invalidating CPU TLBs for normal process and kernel address mappings. Coherent accelerators are still managed with tlbie, as will KVM partition scope translations. Cross-CPU TLB flushing is implemented with IPIs and tlbiel. This is a basic implementation which does not attempt to make any optimisation beyond the tlbie implementation. This is useful for performance testing among other things. For example in certain situations on large systems, using IPIs may be faster than tlbie as they can be directed rather than broadcast. Later we may also take advantage of the IPIs to do more interesting things such as trim the mm cpumask more aggressively. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
The various translation structure invalidations performed in early boot when the MMU is off are not required, because everything is invalidated immediately before a CPU first enables its MMU (see early_init_mmu and early_init_mmu_secondary). Signed-off-by:
-
Nicholas Piggin authored
Radix guests are responsible for managing their own translation caches, so make them match bare metal radix and hash, and make each CPU flush all its translations right before enabling its MMU. Radix guests may not flush partition scope translations, so in tlbiel_all, make these flushes conditional on CPU_FTR_HVMODE. Process scope translations are the only type visible to the guest. Signed-off-by:
-
Nicholas Piggin authored
No functional change. Signed-off-by:
-
Nicholas Piggin authored
There should be no functional changes. - Use calls to existing radix_tlb.c functions in flush_partition. - Rename radix__flush_tlb_lpid to radix__flush_all_lpid and similar, because they flush everything, matching flush_all_mm rather than flush_tlb_mm for the lpid. - Remove some unused radix_tlb.c flush primitives. Signed-off: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
This callback is only required because the partition table init comes before process table allocation on powernv (aka bare metal aka native). Change the order to allocate the process table first, and remove the callback. Signed-off-by:
-
Oliver O'Halloran authored
Use the new eeh_dev_check and eeh_dev_break interfaces to test EEH recovery. Historically this has been done manually using platform specific EEH error injection facilities (e.g. via RTAS). However, documentation on how to use these facilities is haphazard at best and non-existent at worst so it's hard to develop a cross-platform test. The new debugfs interfaces allow the kernel to handle the platform specific details so we can write a more generic set of sets. This patch adds the most basic of recovery tests where: a) Errors are injected and recovered from sequentially, b) Errors are not injected into PCI-PCI bridges, such as PCIe switches. c) Errors are only injected into device function zero. d) No errors are injected into Virtual Functions. a), b) and c) are largely due to limitations of Linux's EEH support. EEH recovery is serialised in the EEH recovery thread which forces a). Similarly, multi-function PCI devices are almost always grouped into the same PE so injecting an error on one function exercises the same code paths. c) is because we currently more or less ignore PCI bridges during recovery and assume that the recovered topology will be the same as the original. d) is due to the limits of the eeh_dev_break interface. With the current implementation we can't inject an error into a specific VF without potentially causing additional errors on other VFs. Due to the serialised recovery process we might end up timing out waiting for another function to recover before the function of interest is recovered. The platform specific error injection facilities are finer-grained and allow this capability, but doing that requires working out how to use those facilities first. Basicly, it's better than nothing and it's a base to build on. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Oliver O'Halloran authored
Add an interface to debugfs for generating an EEH event on a given device. This works by disabling memory accesses to and from the device by setting the PCI_COMMAND register (or the VF Memory Space Enable on the parent PF). This is a somewhat portable alternative to using the platform specific error injection mechanisms since those tend to be either hard to use, or straight up broken. For pseries the interfaces also requires the use of /dev/mem which is probably going to go away in a post-LOCKDOWN world (and it's a horrific hack to begin with) so moving to a kernel-provided interface makes sense and provides a sane, cross-platform interface for userspace so we can write more generic testing scripts. Signed-off-by:
-
Oliver O'Halloran authored
Detecting an frozen EEH PE usually occurs when an MMIO load returns a 0xFFs response. When performing EEH testing using the EEH error injection feature available on some platforms there is no simple way to kick-off the kernel's recovery process since any accesses from userspace (usually /dev/mem) will bypass the MMIO helpers in the kernel which check if a 0xFF response is due to an EEH freeze or not. If a device contains a 0xFF byte in it's config space it's possible to trigger the recovery process via config space read from userspace, but this is not a reliable method. If a driver is bound to the device an in use it will frequently trigger the MMIO check, but this is also inconsistent. To solve these problems this patch adds a debugfs file called "eeh_dev_check" which accepts a <domain>:<bus>:<dev>.<fn> string and runs eeh_dev_check_failure() on it. This is the same check that's done when the kernel gets a 0xFF result from an config or MMIO read with the added benifit that it can be reliably triggered from userspace. Signed-off-by:
-
Oliver O'Halloran authored
I am the RAS team. Hear me roar. Roar. On a more serious note, being able to locate failed devices can be helpful. Set the attention indicator if the slot supports it once we've determined the device is present and only clear it if the device is fully recovered. Signed-off-by:
-
Oliver O'Halloran authored
pnv_php is generally used with PCIe bridges which provide a native interface for setting the attention and power indicator LEDs. Wire up those interfaces even if firmware does not have support for them (yet...) Signed-off-by:
-
Oliver O'Halloran authored
Currently we check that an IODA2 compatible PHB is upstream of this slot. This is mainly to avoid pnv_php creating slots for the various "virtual PHBs" that we create for NVLink. There's no real need for this restriction so allow it on IODA3. Signed-off-by:
-
Oliver O'Halloran authored
When performing EEH recovery of devices in a hotplug slot we need to use the slot driver's ->reset_slot() callback to prevent spurious hotplug events due to spurious DLActive and PresDet change interrupts. Add a reset_slot() callback to pnv_php so we can handle recovery of devices in pnv_php managed slots. Signed-off-by:
-
Oliver O'Halloran authored
When we reset PCI devices managed by a hotplug driver the reset may generate spurious hotplug events that cause the PCI device we're resetting to be torn down accidently. This is a problem for EEH (when the driver is EEH aware) since we want to leave the OS PCI device state intact so that the device can be re-set without losing any resources (network, disks, etc) provided by the driver. Generic PCI code provides the pci_bus_error_reset() function to handle resetting a PCI Device (or bus) by using the reset method provided by the hotplug slot driver. We can use this function if the EEH core has requested a hot reset (common case) without tripping over the hotplug driver. Signed-off-by:
-
Oliver O'Halloran authored
Support for switching CAPI cards into and out of CAPI mode was removed a while ago. Drop the comment since it's no longer relevant. Signed-off-by:
-
Oliver O'Halloran authored
Currently we print a stack trace in the event handler to help with debugging EEH issues. In the case of suprise hot-unplug this is unneeded, so we want to prevent printing the stack trace unless we know it's due to an actual device error. To accomplish this, we can save a stack trace at the point of detection and only print it once the EEH recovery handler has determined the freeze was due to an actual error. Since the whole point of this is to prevent spurious EEH output we also move a few prints out of the detection thread, or mark them as pr_debug so anyone interested can get output from the eeh_check_dev_failure() if they want. Signed-off-by:
-
Oliver O'Halloran authored
When a device is surprise removed while undergoing IO we will probably get an EEH PE freeze due to MMIO timeouts and other errors. When a freeze is detected we send a recovery event to the EEH worker thread which will notify drivers, and perform recovery as needed. In the event of a hot-remove we don't want recovery to occur since there isn't a device to recover. The recovery process is fairly long due to the number of wait states (required by PCIe) which causes problems when devices are removed and replaced (e.g. hot swapping of U.2 NVMe drives). To determine if we need to skip the recovery process we can use the get_adapter_state() operation of the hotplug_slot to determine if the slot contains a device or not, and if the slot is empty we can skip recovery entirely. One thing to note is that the slot being EEH frozen does not prevent the hotplug driver from working. We don't have the EEH recovery thread remove any of the devices since it's assumed that the hotplug driver will handle tearing down the slot state. Signed-off-by:
-
Oliver O'Halloran authored
If a device is torn down by a hotplug slot driver it's marked as removed and marked as permaantly failed. There's no point in trying to recover a permernantly failed device so it should be considered un-actionable. Signed-off-by:
-
Oliver O'Halloran authored
When hot-adding devices we rely on the hotplug driver to create pci_dn's for the devices under the hotplug slot. Converse, when hot-removing the driver will remove the pci_dn's that it created. This is a problem because the pci_dev is still live until it's refcount drops to zero. This can happen if the driver is slow to tear down it's internal state. Ideally, the driver would not attempt to perform any config accesses to the device once it's been marked as removed, but sometimes it happens. As a result, we might attempt to access the pci_dn for a device that has been torn down and the kernel may crash as a result. To fix this, don't free the pci_dn unless the corresponding pci_dev has been released. If the pci_dev is still live, then we mark the pci_dn with a flag that indicates the pci_dev's release function should free it. Signed-off-by:
-
Oliver O'Halloran authored
When the last device in an eeh_pe is removed the eeh_pe structure itself (and any empty parents) are freed since they are no longer needed. This results in a crash when a hotplug driver is involved since the following may occur: 1. Device is suprise removed. 2. Driver performs an MMIO, which fails and queues and eeh_event. 3. Hotplug driver receives a hotplug interrupt and removes any pci_devs that were under the slot. 4. pci_dev is torn down and the eeh_pe is freed. 5. The EEH event handler thread processes the eeh_event and crashes since the eeh_pe pointer in the eeh_event structure is no longer valid. Crashing is generally considered poor form. Instead of doing that use the fact PEs are marked as EEH_PE_INVALID to keep them around until the end of the recovery cycle, at which point we can safely prune any empty PEs. Signed-off-by:
-
- 30 Aug, 2019 13 commits
-
-
Nicholas Piggin authored
This avoids 3 loads in the radix page fault case, 1 load in the hash fault case, and 2 loads in the hash miss page fault case. Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
Nicholas Piggin authored
It is clever, but the small code saving is not worth the spaghetti of jumping to a label in an expanded macro, particularly when the label is just a number rather than a descriptive name. So expand the INT_COMMON macro twice, once for the stack and no stack cases, and branch to those. The slight code size increase is worth the improved clarity of branches for this non-performance critical code. Signed-off-by:
-
Nicholas Piggin authored
This better reflects the order in which the code is executed. No generated code change except BUG line number constants. Signed-off-by:
-
Nicholas Piggin authored
Move DAR and DSISR saving to pt_regs into INT_COMMON. Also add an option to expand RECONCILE_IRQ_STATE. Signed-off-by:
-
Nicholas Piggin authored
No generated code change except BUG line number constants. Signed-off-by:
-
Nicholas Piggin authored
No generated code change except BUG line number constants. Signed-off-by:
-
Nicholas Piggin authored
No generated code change except BUG line number constants. Signed-off-by:
-
Nicholas Piggin authored
Merge EXCEPTION_PROLOG_COMMON_3 into EXCEPTION_PROLOG_COMMON_2. No generated code change except BUG line number constants. Signed-off-by:
-
Nicholas Piggin authored
Also change argument name (n -> vec) to match others. No generated code change. Signed-off-by:
-
Nicholas Piggin authored
Replace the 4 variants of cpp macros with one gas macro. No generated code change except BUG line number constants. Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
Nicholas Piggin authored
All other virt handlers have the prolog code in the virt vector rather than branch to the real vector. Follow this pattern in the denorm virt handler. Signed-off-by:
-
