The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller
firmware. Depending on how drive caches are handled internally by
controller firmware this could potentially lead to data integrity
problems.

Ensure that cache flushes are passed to the controller.

[mkp: applied by hand and removed unused vars]

Cc: <stable@vger.kernel.org>
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reported-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

map_storep was not being vfree()'d in the module_exit call.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Commit 02b01e01 ("megaraid_sas: return sync cache call with
success") modified the driver to successfully complete SYNCHRONIZE_CACHE
commands without passing them to the controller. Disk drive caches are
only explicitly managed by controller firmware when operating in RAID
mode. So this commit effectively disabled writeback cache flushing for
any drives used in JBOD mode, leading to data integrity failures.

[mkp: clarified patch description]

Fixes: 02b01e01
CC: stable@vger.kernel.org
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The g_NCR5380 has been converted to more regular probing, which
means its probe function can now be invoked after the __init section
is discarded, as pointed out by this kbuild warning:

WARNING: drivers/scsi/built-in.o(.text+0x3a105): Section mismatch in reference from the function generic_NCR5380_isa_match() to the function .init.text:probe_intr()
WARNING: drivers/scsi/built-in.o(.text+0x3a145): Section mismatch in reference from the function generic_NCR5380_isa_match() to the variable .init.data:probe_irq

To make sure this works correctly in all cases, let's remove
the __init and __initdata annotations.

Fixes: a8cfbcae ("scsi: g_NCR5380: Stop using scsi_module.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

[ 3843.132217] WARNING: CPU: 20 PID: 1227 at kernel/softirq.c:150 __local_bh_enable_ip+0x6b/0x90
[ 3843.142815] Modules linked in:
...
[ 3843.294328] CPU: 20 PID: 1227 Comm: kworker/20:1H Tainted: G            E   4.8.0-rc1+ #3
[ 3843.304944] Hardware name: Dell Inc. PowerEdge R720/0X6H47, BIOS 1.4.8 10/25/2012
[ 3843.314798] Workqueue: kblockd blk_timeout_work
[ 3843.321350]  0000000000000086 00000000a32f4533 ffff8802216d7bd8 ffffffff8135c3cf
[ 3843.331146]  0000000000000000 0000000000000000 ffff8802216d7c18 ffffffff8108d661
[ 3843.340918]  00000096216d7c50 0000000000000200 ffff8802d07cc828 ffff8801b3632550
[ 3843.350687] Call Trace:
[ 3843.354866]  [<ffffffff8135c3cf>] dump_stack+0x63/0x84
[ 3843.362061]  [<ffffffff8108d661>] __warn+0xd1/0xf0
[ 3843.368851]  [<ffffffff8108d79d>] warn_slowpath_null+0x1d/0x20
[ 3843.376791]  [<ffffffff810930eb>] __local_bh_enable_ip+0x6b/0x90
[ 3843.384903]  [<ffffffff816fe7be>] _raw_spin_unlock_bh+0x1e/0x20
[ 3843.392940]  [<ffffffffa085f710>] beiscsi_alloc_pdu+0x2f0/0x6e0 [be2iscsi]
[ 3843.402076]  [<ffffffffa06bc358>] __iscsi_conn_send_pdu+0xf8/0x370 [libiscsi]
[ 3843.411549]  [<ffffffffa06bc6fe>] iscsi_send_nopout+0xbe/0x110 [libiscsi]
[ 3843.420639]  [<ffffffffa06bd98b>] iscsi_eh_cmd_timed_out+0x29b/0x2b0 [libiscsi]
[ 3843.430339]  [<ffffffff814cd1de>] scsi_times_out+0x5e/0x250
[ 3843.438119]  [<ffffffff813374af>] blk_rq_timed_out+0x1f/0x60
[ 3843.446009]  [<ffffffff8133759d>] blk_timeout_work+0xad/0x150
[ 3843.454010]  [<ffffffff810a6642>] process_one_work+0x152/0x400
[ 3843.462114]  [<ffffffff810a6f35>] worker_thread+0x125/0x4b0
[ 3843.469961]  [<ffffffff810a6e10>] ? rescuer_thread+0x380/0x380
[ 3843.478116]  [<ffffffff810aca28>] kthread+0xd8/0xf0
[ 3843.485212]  [<ffffffff816fedff>] ret_from_fork+0x1f/0x40
[ 3843.492908]  [<ffffffff810ac950>] ? kthread_park+0x60/0x60
[ 3843.500715] ---[ end trace 57ec0a1d8f0dd3a0 ]---
[ 3852.328667] NMI watchdog: Watchdog detected hard LOCKUP on cpu 1Kernel panic - not syncing: Hard LOCKUP

blk_timeout_work takes queue_lock spin_lock with interrupts disabled
before invoking iscsi_eh_cmd_timed_out. This causes a WARN_ON_ONCE in
spin_unlock_bh for wrb_lock/io_sgl_lock/mgmt_sgl_lock.

CPU was kept busy in lot of bottom half work with interrupts disabled
thus causing hard lock up.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The code at free_task label in __iscsi_conn_send_pdu can get executed
from blk_timeout_work which takes queue_lock using spin_lock_irq.
back_lock taken with spin_unlock_bh will cause WARN_ON_ONCE.  The code
gets executed either with bottom half or IRQ disabled hence using
spin_lock/spin_unlock for back_lock is safe.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Commit afc3f83c ("scsi: ipr: Add asynchronous error notification")
introduced the warn on shown below. To fix this, rather than attempting
to send the KOBJ_CHANGE uevent from interrupt context, which is what is
causing the WARN_ON, just wake the ipr worker thread which will send a
KOBJ_CHANGE uevent.

[  142.278120] WARNING: CPU: 15 PID: 0 at kernel/softirq.c:161 __local_bh_enable_ip+0x7c/0xd0
[  142.278124] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ses enclosure scsi_transport_sas sg pseries_rng nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod sd_mod cdrom ipr libata ibmvscsi scsi_transport_srp ibmveth dm_mirror dm_region_hash dm_log dm_mod
[  142.278208] CPU: 15 PID: 0 Comm: swapper/15 Not tainted 4.8.0.ipr+ #21
[  142.278213] task: c00000010cf24480 task.stack: c00000010cfec000
[  142.278217] NIP: c0000000000c0c7c LR: c000000000881778 CTR: c0000000003c5bf0
[  142.278221] REGS: c00000010cfef080 TRAP: 0700   Not tainted  (4.8.0.ipr+)
[  142.278224] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE>  CR: 28008022  XER: 2000000f
[  142.278236] CFAR: c0000000000c0c20 SOFTE: 0
GPR00: c000000000706c78 c00000010cfef300 c000000000f91d00 c000000000706c78
GPR04: 0000000000000200 c000000000f7bc80 0000000000000000 00000000024000c0
GPR08: 0000000000000000 0000000000000001 c000000000ee1d00 c000000000a9bdd0
GPR12: c0000000003c5bf0 c00000000eb22d00 c000000100ca3880 c00000020ed38400
GPR16: 0000000000000000 0000000000000000 c000000100940508 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 00000000024000c0
GPR24: c0000000004588e0 c00000010863bd00 c00000010863bd00 c0000000013773f8
GPR28: c000000000f7bc80 0000000000000000 ffffffffffffffff c000000000f7bcd8
[  142.278290] NIP [c0000000000c0c7c] __local_bh_enable_ip+0x7c/0xd0
[  142.278296] LR [c000000000881778] _raw_spin_unlock_bh+0x38/0x60
[  142.278299] Call Trace:
[  142.278303] [c00000010cfef300] [c000000000f7bc80] init_net+0x0/0x1900 (unreliable)
[  142.278310] [c00000010cfef320] [c000000000706c78] peernet2id+0x58/0x80
[  142.278316] [c00000010cfef370] [c00000000075caec] netlink_broadcast_filtered+0x30c/0x550
[  142.278323] [c00000010cfef430] [c000000000459078] kobject_uevent_env+0x588/0x780
[  142.278331] [c00000010cfef510] [d000000003163a6c] ipr_process_error+0x11c/0x240 [ipr]
[  142.278337] [c00000010cfef5c0] [d000000003152298] ipr_fail_all_ops+0x108/0x220 [ipr]
[  142.278343] [c00000010cfef670] [d0000000031643f8] ipr_reset_restore_cfg_space+0xa8/0x240 [ipr]
[  142.278350] [c00000010cfef6f0] [d000000003158a00] ipr_reset_ioa_job+0x80/0xe0 [ipr]
[  142.278356] [c00000010cfef720] [d000000003153f78] ipr_reset_timer_done+0xa8/0xe0 [ipr]
[  142.278363] [c00000010cfef770] [c000000000149c88] call_timer_fn+0x58/0x1c0
[  142.278368] [c00000010cfef800] [c000000000149f60] expire_timers+0x140/0x200
[  142.278373] [c00000010cfef870] [c00000000014a0e8] run_timer_softirq+0xc8/0x230
[  142.278379] [c00000010cfef900] [c0000000000c0844] __do_softirq+0x164/0x3c0
[  142.278384] [c00000010cfef9f0] [c0000000000c0f18] irq_exit+0x1a8/0x1c0
[  142.278389] [c00000010cfefa20] [c000000000020b54] timer_interrupt+0xa4/0xe0
[  142.278394] [c00000010cfefa50] [c000000000002414] decrementer_common+0x114/0x180
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

We accidentally overwrite the original saved value of "flags" so that we
can't re-enable IRQs at the end of the function.  Presumably this
function is mostly called with IRQs disabled or it would be obvious in
testing.

Fixes: aceeffbb ("zfcp: trace full payload of all SAN records (req,resp,iels)")
Cc: <stable@vger.kernel.org> #2.6.38+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The local variable of 'devname' in scsi_report_lun_scan() isn't used any
more, so remove it.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch fixes one use-after-free report[1] by KASAN.

In __scsi_scan_target(), when a type 31 device is probed,
SCSI_SCAN_TARGET_PRESENT is returned and the target will be scanned
again.

Inside the following scsi_report_lun_scan(), one new scsi_device
instance is allocated, and scsi_probe_and_add_lun() is called again to
probe the target and still see type 31 device, finally
__scsi_remove_device() is called to remove & free the device at the end
of scsi_probe_and_add_lun(), so cause use-after-free in
scsi_report_lun_scan().

And the following SCSI log can be observed:

	scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36
	scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0
	scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added
	scsi 0:0:2:0: scsi scan: Sending REPORT LUNS to (try 0)
	scsi 0:0:2:0: scsi scan: REPORT LUNS successful (try 0) result 0x0
	scsi 0:0:2:0: scsi scan: REPORT LUN scan
	scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36
	scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0
	scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added
	BUG: KASAN: use-after-free in __scsi_scan_target+0xbf8/0xe40 at addr ffff88007b44a104

This patch fixes the issue by moving the putting reference at
the end of scsi_report_lun_scan().

[1] KASAN report
==================================================================
[    3.274597] PM: Adding info for serio:serio1
[    3.275127] BUG: KASAN: use-after-free in __scsi_scan_target+0xd87/0xdf0 at addr ffff880254d8c304
[    3.275653] Read of size 4 by task kworker/u10:0/27
[    3.275903] CPU: 3 PID: 27 Comm: kworker/u10:0 Not tainted 4.8.0 #2121
[    3.276258] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[    3.276797] Workqueue: events_unbound async_run_entry_fn
[    3.277083]  ffff880254d8c380 ffff880259a37870 ffffffff94bbc6c1 ffff880078402d80
[    3.277532]  ffff880254d8bb80 ffff880259a37898 ffffffff9459fec1 ffff880259a37930
[    3.277989]  ffff880254d8bb80 ffff880078402d80 ffff880259a37920 ffffffff945a0165
[    3.278436] Call Trace:
[    3.278528]  [<ffffffff94bbc6c1>] dump_stack+0x65/0x84
[    3.278797]  [<ffffffff9459fec1>] kasan_object_err+0x21/0x70
[    3.279063] device: 'psaux': device_add
[    3.279616]  [<ffffffff945a0165>] kasan_report_error+0x205/0x500
[    3.279651] PM: Adding info for No Bus:psaux
[    3.280202]  [<ffffffff944ecd22>] ? kfree_const+0x22/0x30
[    3.280486]  [<ffffffff94bc2dc9>] ? kobject_release+0x119/0x370
[    3.280805]  [<ffffffff945a0543>] __asan_report_load4_noabort+0x43/0x50
[    3.281170]  [<ffffffff9507e1f7>] ? __scsi_scan_target+0xd87/0xdf0
[    3.281506]  [<ffffffff9507e1f7>] __scsi_scan_target+0xd87/0xdf0
[    3.281848]  [<ffffffff9507d470>] ? scsi_add_device+0x30/0x30
[    3.282156]  [<ffffffff94f7f660>] ? pm_runtime_autosuspend_expiration+0x60/0x60
[    3.282570]  [<ffffffff956ddb07>] ? _raw_spin_lock+0x17/0x40
[    3.282880]  [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160
[    3.283200]  [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0
[    3.283563]  [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250
[    3.283882]  [<ffffffff9507efc1>] do_scan_async+0x41/0x450
[    3.284173]  [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610
[    3.284492]  [<ffffffff941a8954>] ? pwq_dec_nr_in_flight+0x124/0x2a0
[    3.284876]  [<ffffffff941d1770>] ? preempt_count_add+0x130/0x160
[    3.285207]  [<ffffffff941a9a84>] process_one_work+0x544/0x12d0
[    3.285526]  [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0
[    3.285844]  [<ffffffff941aa810>] ? process_one_work+0x12d0/0x12d0
[    3.286182]  [<ffffffff941bb365>] kthread+0x1c5/0x260
[    3.286443]  [<ffffffff940855cd>] ? __switch_to+0x88d/0x1430
[    3.286745]  [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0
[    3.287085]  [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40
[    3.287368]  [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0
[    3.287697] Object at ffff880254d8bb80, in cache kmalloc-2048 size: 2048
[    3.288064] Allocated:
[    3.288147] PID = 27
[    3.288218]  [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50
[    3.288531]  [<ffffffff9459f246>] save_stack+0x46/0xd0
[    3.288806]  [<ffffffff9459f4bd>] kasan_kmalloc+0xad/0xe0
[    3.289098]  [<ffffffff9459c07e>] __kmalloc+0x13e/0x250
[    3.289378]  [<ffffffff95078e5a>] scsi_alloc_sdev+0xea/0xcf0
[    3.289701]  [<ffffffff9507de76>] __scsi_scan_target+0xa06/0xdf0
[    3.290034]  [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160
[    3.290362]  [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0
[    3.290724]  [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250
[    3.291055]  [<ffffffff9507efc1>] do_scan_async+0x41/0x450
[    3.291354]  [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610
[    3.291695]  [<ffffffff941a9a84>] process_one_work+0x544/0x12d0
[    3.292022]  [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0
[    3.292325]  [<ffffffff941bb365>] kthread+0x1c5/0x260
[    3.292594]  [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40
[    3.292886] Freed:
[    3.292945] PID = 27
[    3.293016]  [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50
[    3.293327]  [<ffffffff9459f246>] save_stack+0x46/0xd0
[    3.293600]  [<ffffffff9459fa61>] kasan_slab_free+0x71/0xb0
[    3.293916]  [<ffffffff9459bac2>] kfree+0xa2/0x1f0
[    3.294168]  [<ffffffff9508158a>] scsi_device_dev_release_usercontext+0x50a/0x730
[    3.294598]  [<ffffffff941ace9a>] execute_in_process_context+0xda/0x130
[    3.294974]  [<ffffffff9508107c>] scsi_device_dev_release+0x1c/0x20
[    3.295322]  [<ffffffff94f566f6>] device_release+0x76/0x1e0
[    3.295626]  [<ffffffff94bc2db7>] kobject_release+0x107/0x370
[    3.295942]  [<ffffffff94bc29ce>] kobject_put+0x4e/0xa0
[    3.296222]  [<ffffffff94f56e17>] put_device+0x17/0x20
[    3.296497]  [<ffffffff9505201c>] scsi_device_put+0x7c/0xa0
[    3.296801]  [<ffffffff9507e1bc>] __scsi_scan_target+0xd4c/0xdf0
[    3.297132]  [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160
[    3.297458]  [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0
[    3.297829]  [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250
[    3.298156]  [<ffffffff9507efc1>] do_scan_async+0x41/0x450
[    3.298453]  [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610
[    3.298777]  [<ffffffff941a9a84>] process_one_work+0x544/0x12d0
[    3.299105]  [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0
[    3.299408]  [<ffffffff941bb365>] kthread+0x1c5/0x260
[    3.299676]  [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40
[    3.299967] Memory state around the buggy address:
[    3.300209]  ffff880254d8c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    3.300608]  ffff880254d8c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    3.300986] >ffff880254d8c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    3.301408]                    ^
[    3.301550]  ffff880254d8c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[    3.301987]  ffff880254d8c400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.302396]
==================================================================

Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

At drivers/scsi/device_handler/scsi_dh_emc.c it was defined as:

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: device-mapper development <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull btrfs updates from Chris Mason:
 "This is a big variety of fixes and cleanups.

  Liu Bo continues to fixup fuzzer related problems, and some of Josef's
  cleanups are prep for his bigger extent buffer changes (slated for
  v4.10)"

* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (39 commits)
  Revert "btrfs: let btrfs_delete_unused_bgs() to clean relocated bgs"
  Btrfs: remove unnecessary btrfs_mark_buffer_dirty in split_leaf
  Btrfs: don't BUG() during drop snapshot
  btrfs: fix btrfs_no_printk stub helper
  Btrfs: memset to avoid stale content in btree leaf
  btrfs: parent_start initialization cleanup
  btrfs: Remove already completed TODO comment
  btrfs: Do not reassign count in btrfs_run_delayed_refs
  btrfs: fix a possible umount deadlock
  Btrfs: fix memory leak in do_walk_down
  btrfs: btrfs_debug should consume fs_info when DEBUG is not defined
  btrfs: convert send's verbose_printk to btrfs_debug
  btrfs: convert pr_* to btrfs_* where possible
  btrfs: convert printk(KERN_* to use pr_* calls
  btrfs: unsplit printed strings
  btrfs: clean the old superblocks before freeing the device
  Btrfs: kill BUG_ON in run_delayed_tree_ref
  Btrfs: don't leak reloc root nodes on error
  btrfs: squash lines for simple wrapper functions
  Btrfs: improve check_node to avoid reading corrupted nodes
  ...

Pull UBI/UBIFS updates from Richard Weinberger:
 "This pull request contains:

   - Fixes for both UBI and UBIFS
   - overlayfs support (O_TMPFILE, RENAME_WHITEOUT/EXCHANGE)
   - Code refactoring for the upcoming MLC support"

[ Ugh, we just got rid of the "rename2()" naming for the extended rename
  functionality. And this re-introduces it in ubifs with the cross-
  renaming and whiteout support.

  But rather than do any re-organizations in the merge itself, the
  naming can be cleaned up later ]

* tag 'upstream-4.9-rc1' of git://git.infradead.org/linux-ubifs: (27 commits)
  UBIFS: improve function-level documentation
  ubifs: fix host xattr_len when changing xattr
  ubifs: Use move variable in ubifs_rename()
  ubifs: Implement RENAME_EXCHANGE
  ubifs: Implement RENAME_WHITEOUT
  ubifs: Implement O_TMPFILE
  ubi: Fix Fastmap's update_vol()
  ubi: Fix races around ubi_refill_pools()
  ubi: Deal with interrupted erasures in WL
  UBI: introduce the VID buffer concept
  UBI: hide EBA internals
  UBI: provide an helper to query LEB information
  UBI: provide an helper to check whether a LEB is mapped or not
  UBI: add an helper to check lnum validity
  UBI: simplify LEB write and atomic LEB change code
  UBI: simplify recover_peb() code
  UBI: move the global ech and vidh variables into struct ubi_attach_info
  UBI: provide helpers to allocate and free aeb elements
  UBI: fastmap: use ubi_io_{read, write}_data() instead of ubi_io_{read, write}()
  UBI: fastmap: use ubi_rb_for_each_entry() in unmap_peb()
  ...

it actually worked only when requested area ended on the page boundary...
Reported-by: Marco Grassi <marco.gra@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Netfilter list handling fix, from Linus.

 2) RXRPC/AFS bug fixes from David Howells (oops on call to serviceless
    endpoints, build warnings, missing notifications, etc.) From David
    Howells.

 3) Kernel log message missing newlines, from Colin Ian King.

 4) Don't enter direct reclaim in netlink dumps, the idea is to use a
    high order allocation first and fallback quickly to a 0-order
    allocation if such a high-order one cannot be done cheaply and
    without reclaim. From Eric Dumazet.

 5) Fix firmware download errors in btusb bluetooth driver, from Ethan
    Hsieh.

 6) Missing Kconfig deps for QCOM_EMAC, from Geert Uytterhoeven.

 7) Fix MDIO_XGENE dup Kconfig entry. From Laura Abbott.

 8) Constrain ipv6 rtr_solicits sysctl values properly, from Maciej
    Żenczykowski.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  netfilter: Fix slab corruption.
  be2net: Enable VF link state setting for BE3
  be2net: Fix TX stats for TSO packets
  be2net: Update Copyright string in be_hw.h
  be2net: NCSI FW section should be properly updated with ethtool for BE3
  be2net: Provide an alternate way to read pf_num for BEx chips
  wan/fsl_ucc_hdlc: Fix size used in dma_free_coherent()
  net: macb: NULL out phydev after removing mdio bus
  xen-netback: make sure that hashes are not send to unaware frontends
  Fixing a bug in team driver due to incorrect 'unsigned int' to 'int' conversion
  MAINTAINERS: add myself as a maintainer of xen-netback
  ipv6 addrconf: disallow rtr_solicits < -1
  Bluetooth: btusb: Fix atheros firmware download error
  drivers: net: phy: Correct duplicate MDIO_XGENE entry
  ethernet: qualcomm: QCOM_EMAC should depend on HAS_DMA and HAS_IOMEM
  net: ethernet: mediatek: remove hwlro property in the device tree
  net: ethernet: mediatek: get hw lro capability by the chip id instead of by the dtsi
  net: ethernet: mediatek: get the chip id by ETHDMASYS registers
  net: bgmac: Fix errant feature flag check
  netlink: do not enter direct reclaim from netlink_dump()
  ...

Use the correct pattern for singly linked list insertion and
deletion.  We can also calculate the list head outside of the
mutex.

Fixes: e3b37f11 ("netfilter: replace list_head with single linked list")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/netfilter/core.c | 108 ++++++++++++++++-----------------------------------
 1 file changed, 33 insertions(+), 75 deletions(-)

Pull more vfs updates from Al Viro:
 ">rename2() work from Miklos + current_time() from Deepa"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Replace current_fs_time() with current_time()
  fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
  fs: Replace CURRENT_TIME with current_time() for inode timestamps
  fs: proc: Delete inode time initializations in proc_alloc_inode()
  vfs: Add current_time() api
  vfs: add note about i_op->rename changes to porting
  fs: rename "rename2" i_op to "rename"
  vfs: remove unused i_op->rename
  fs: make remaining filesystems use .rename2
  libfs: support RENAME_NOREPLACE in simple_rename()
  fs: support RENAME_NOREPLACE for local filesystems
  ncpfs: fix unused variable warning

Pull MTD updates from Brian Norris:
 "I've not been very active this cycle, so these are mostly from Boris,
  for the NAND flash subsystem.

  NAND:

   - Add the infrastructure to automate NAND timings configuration

   - Provide a generic DT property to maximize ECC strength

   - Some refactoring in the core bad block table handling, to help with
     improving some of the logic in error cases.

   - Minor cleanups and fixes

  MTD:

   - Add APIs for handling page pairing; this is necessary for reliably
     supporting MLC and TLC NAND flash, where paired-page disturbance
     affects reliability. Upper layers (e.g., UBI) should make use of
     these in the near future"

* tag 'for-linus-20161008' of git://git.infradead.org/linux-mtd: (35 commits)
  mtd: nand: fix trivial spelling error
  mtdpart: Propagate _get/put_device()
  mtd: nand: Provide nand_cleanup() function to free NAND related resources
  mtd: Kill the OF_MTD Kconfig option
  mtd: nand: mxc: Test CONFIG_OF instead of CONFIG_OF_MTD
  mtd: nand: Fix nand_command_lp() for 8bits opcodes
  mtd: nand: sunxi: Support ECC maximization
  mtd: nand: Support maximizing ECC when using software BCH
  mtd: nand: Add an option to maximize the ECC strength
  mtd: nand: mxc: Add timing setup for v2 controllers
  mtd: nand: mxc: implement onfi get/set features
  mtd: nand: sunxi: switch from manual to automated timing config
  mtd: nand: automate NAND timings selection
  mtd: nand: Expose data interface for ONFI mode 0
  mtd: nand: Add function to convert ONFI mode to data_interface
  mtd: nand: convert ONFI mode into data interface
  mtd: nand: Introduce nand_data_interface
  mtd: nand: Create a NAND reset function
  mtd: nand: remove unnecessary 'extern' from function declarations
  MAINTAINERS: Add maintainer entry for Ingenic JZ4780 NAND driver
  ...

Pull vfs xattr updates from Al Viro:
 "xattr stuff from Andreas

  This completes the switch to xattr_handler ->get()/->set() from
  ->getxattr/->setxattr/->removexattr"

* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: Remove {get,set,remove}xattr inode operations
  xattr: Stop calling {get,set,remove}xattr inode operations
  vfs: Check for the IOP_XATTR flag in listxattr
  xattr: Add __vfs_{get,set,remove}xattr helpers
  libfs: Use IOP_XATTR flag for empty directory handling
  vfs: Use IOP_XATTR flag for bad-inode handling
  vfs: Add IOP_XATTR inode operations flag
  vfs: Move xattr_resolve_name to the front of fs/xattr.c
  ecryptfs: Switch to generic xattr handlers
  sockfs: Get rid of getxattr iop
  sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
  kernfs: Switch to generic xattr handlers
  hfs: Switch to generic xattr handlers
  jffs2: Remove jffs2_{get,set,remove}xattr macros
  xattr: Remove unnecessary NULL attribute name check

Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.9:

  API:
   - The crypto engine code now supports hashes.

  Algorithms:
   - Allow keys >= 2048 bits in FIPS mode for RSA.

  Drivers:
   - Memory overwrite fix for vmx ghash.
   - Add support for building ARM sha1-neon in Thumb2 mode.
   - Reenable ARM ghash-ce code by adding import/export.
   - Reenable img-hash by adding import/export.
   - Add support for multiple cores in omap-aes.
   - Add little-endian support for sha1-powerpc.
   - Add Cavium HWRNG driver for ThunderX SoC"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits)
  crypto: caam - treat SGT address pointer as u64
  crypto: ccp - Make syslog errors human-readable
  crypto: ccp - clean up data structure
  crypto: vmx - Ensure ghash-generic is enabled
  crypto: testmgr - add guard to dst buffer for ahash_export
  crypto: caam - Unmap region obtained by of_iomap
  crypto: sha1-powerpc - little-endian support
  crypto: gcm - Fix IV buffer size in crypto_gcm_setkey
  crypto: vmx - Fix memory corruption caused by p8_ghash
  crypto: ghash-generic - move common definitions to a new header file
  crypto: caam - fix sg dump
  hwrng: omap - Only fail if pm_runtime_get_sync returns < 0
  crypto: omap-sham - shrink the internal buffer size
  crypto: omap-sham - add support for export/import
  crypto: omap-sham - convert driver logic to use sgs for data xmit
  crypto: omap-sham - change the DMA threshold value to a define
  crypto: omap-sham - add support functions for sg based data handling
  crypto: omap-sham - rename sgl to sgl_tmp for deprecation
  crypto: omap-sham - align algorithms on word offset
  crypto: omap-sham - add context export/import stubs
  ...

Pull dlm fix from David Teigland:
 "This includes a bug fix for a bad memory access during workqueue
  cleanup, which can happen while shutting down the dlm networking
  layer"

* tag 'dlm-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: free workqueues after the connections

Pull Ceph updates from Ilya Dryomov:
 "The big ticket item here is support for rbd exclusive-lock feature,
  with maintenance operations offloaded to userspace (Douglas Fuller,
  Mike Christie and myself). Another block device bullet is a series
  fixing up layering error paths (myself).

  On the filesystem side, we've got patches that improve our handling of
  buffered vs dio write races (Neil Brown) and a few assorted fixes from
  Zheng. Also included a couple of random cleanups and a minor CRUSH
  update"

* tag 'ceph-for-4.9-rc1' of git://github.com/ceph/ceph-client: (39 commits)
  crush: remove redundant local variable
  crush: don't normalize input of crush_ln iteratively
  libceph: ceph_build_auth() doesn't need ceph_auth_build_hello()
  libceph: use CEPH_AUTH_UNKNOWN in ceph_auth_build_hello()
  ceph: fix description for rsize and rasize mount options
  rbd: use kmalloc_array() in rbd_header_from_disk()
  ceph: use list_move instead of list_del/list_add
  ceph: handle CEPH_SESSION_REJECT message
  ceph: avoid accessing / when mounting a subpath
  ceph: fix mandatory flock check
  ceph: remove warning when ceph_releasepage() is called on dirty page
  ceph: ignore error from invalidate_inode_pages2_range() in direct write
  ceph: fix error handling of start_read()
  rbd: add rbd_obj_request_error() helper
  rbd: img_data requests don't own their page array
  rbd: don't call rbd_osd_req_format_read() for !img_data requests
  rbd: rework rbd_img_obj_exists_submit() error paths
  rbd: don't crash or leak on errors in rbd_img_obj_parent_read_full_callback()
  rbd: move bumping img_request refcount into rbd_obj_request_submit()
  rbd: mark the original request as done if stat request fails
  ...

This reverts commit 5d8eb6fe.

When we remove devices, we free the device structures.  Delaying
btfs_remove_chunk() ends up hitting a use-after-free on them.
Signed-off-by: Chris Mason <clm@fb.com>

Pull splice fixups from Al Viro:
 "A couple of fixups for interaction of pipe-backed iov_iter with
  O_DIRECT reads + constification of a couple of primitives in uio.h
  missed by previous rounds.

  Kudos to davej - his fuzzing has caught those bugs"

* 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  [btrfs] fix check_direct_IO() for non-iovec iterators
  constify iov_iter_count() and iter_is_iovec()
  fix ITER_PIPE interaction with direct_IO

Pull misc vfs updates from Al Viro:
 "Assorted misc bits and pieces.

  There are several single-topic branches left after this (rename2
  series from Miklos, current_time series from Deepa Dinamani, xattr
  series from Andreas, uaccess stuff from from me) and I'd prefer to
  send those separately"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
  proc: switch auxv to use of __mem_open()
  hpfs: support FIEMAP
  cifs: get rid of unused arguments of CIFSSMBWrite()
  posix_acl: uapi header split
  posix_acl: xattr representation cleanups
  fs/aio.c: eliminate redundant loads in put_aio_ring_file
  fs/internal.h: add const to ns_dentry_operations declaration
  compat: remove compat_printk()
  fs/buffer.c: make __getblk_slow() static
  proc: unsigned file descriptors
  fs/file: more unsigned file descriptors
  fs: compat: remove redundant check of nr_segs
  cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
  cifs: don't use memcpy() to copy struct iov_iter
  get rid of separate multipage fault-in primitives
  fs: Avoid premature clearing of capabilities
  fs: Give dentry to inode_change_ok() instead of inode
  fuse: Propagate dentry down to inode_change_ok()
  ceph: Propagate dentry down to inode_change_ok()
  xfs: Propagate dentry down to inode_change_ok()
  ...

Pull ARM pcmcia updates from Russell King:
 "These updates lay the foundations for more generic soc_common PCMCIA
  support, which will result in several of the board specific drivers
  being elimated.

  As the dependencies for this are complex, the preliminary work is
  being submitted now, with the remainder scheduled for the next merge
  window"

* 'pcmcia' of git://git.armlinux.org.uk/~rmk/linux-arm:
  pcmcia: soc_common: add driver-data pointer
  pcmcia: soc_common: add support for voltage sense GPIOs
  pcmcia: soc_common: constify pcmcia_low_level ops pointer
  pcmcia: soc_common: switch to a per-socket cpufreq notifier
  pcmcia: soc_common: add support for Vcc and Vpp regulators
  pcmcia: soc_common: add CF socket state helper
  pcmcia: soc_common: restore previous socket state on error
  pcmcia: soc_common: add support for reset and bus enable GPIOs
  pcmcia: soc_common: request legacy detect GPIO with active low
  pcmcia: soc_common: ignore invalid interrupts
  pcmcia: soc_common: switch to using gpio_descs
  pcmcia: soc_common: use devm_gpio_request_one()

Pull nios2 update from Ley Foon Tan:
 "Use of_property_read_bool() instead of open-coding it"

* tag 'nios2-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: use of_property_read_bool

Pull CRIS updates from Jesper Nilsson.

* tag 'cris-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: return of class_create should be considered
  CRIS: defconfig: remove MTDRAM_ABS_POS
  CRIS v32: remove some double unlocks
  Fix typos
  cris: migrate exception table users off module.h and onto extable.h
  cris: v10: axisflashmap: remove unused ifdefs
  cris: use generic io.h
  cris: fix Kconfig mismatch when building with CONFIG_PCI
  cris: cardbus: fix header include path
  cris: add dev88_defconfig
  cris: irq: stop loop from accessing array out of bounds
  cris: fasttimer: fix mixed declarations and code compile warning
  cris: intmem: fix pointer comparison compile warning
  cris: intmem: fix device_initcall compile warning

Pull protection keys syscall interface from Thomas Gleixner:
 "This is the final step of Protection Keys support which adds the
  syscalls so user space can actually allocate keys and protect memory
  areas with them. Details and usage examples can be found in the
  documentation.

  The mm side of this has been acked by Mel"

* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pkeys: Update documentation
  x86/mm/pkeys: Do not skip PKRU register if debug registers are not used
  x86/pkeys: Fix pkeys build breakage for some non-x86 arches
  x86/pkeys: Add self-tests
  x86/pkeys: Allow configuration of init_pkru
  x86/pkeys: Default to a restrictive init PKRU
  pkeys: Add details of system call use to Documentation/
  generic syscalls: Wire up memory protection keys syscalls
  x86: Wire up protection keys system calls
  x86/pkeys: Allocation/free syscalls
  x86/pkeys: Make mprotect_key() mask off additional vm_flags
  mm: Implement new pkey_mprotect() system call
  x86/pkeys: Add fault handling for PF_PK page fault bit

Pull x86 updates from Thomas Gleixner:
 "A pile of regression fixes and updates:

   - address the fallout of the patches which made the cpuid - nodeid
     relation permanent: Handling of invalid APIC ids and preventing
     pointless warning messages.

   - force eager FPU when protection keys are enabled. Protection keys
     are not generating FPU exceptions so they cannot work with the lazy
     FPU mechanism.

   - prevent force migration of interrupts which are not part of the CPU
     vector domain.

   - handle the fact that APIC ids are not updated in the ACPI/MADT
     tables on physical CPU hotplug

   - remove bash-isms from syscall table generator script

   - use the hypervisor supplied APIC frequency when running on VMware"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pkeys: Make protection keys an "eager" feature
  x86/apic: Prevent pointless warning messages
  x86/acpi: Prevent LAPIC id 0xff from being accounted
  arch/x86: Handle non enumerated CPU after physical hotplug
  x86/unwind: Fix oprofile module link error
  x86/vmware: Skip lapic calibration on VMware
  x86/syscalls: Remove bash-isms in syscall table generator
  x86/irq: Prevent force migration of irqs which are not in the vector domain

looking for duplicate ->iov_base makes sense only for
iovec-backed iterators; for kvec-backed ones it's pointless,
for bvec-backed ones it's pointless and broken on 32bit (we
walk through an array of struct bio_vec accessing them as if
they were struct iovec; works by accident on 64bit, but on
32bit it'll blow up) and for pipe-backed ones it's pointless
and ends up oopsing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

by making sure we call iov_iter_advance() on original
iov_iter even if direct_IO (done on its copy) has returned 0.
It's a no-op for old iov_iter flavours and does the right thing
(== truncation of the stuff we'd allocated, but not filled) in
ITER_PIPE case.  Failures (e.g. -EIO) get caught and dealt with
by cleanup in generic_file_read_iter().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull perf tooling updates from Thomas Gleixner:

 - handle uretprobe placement proper on little endian PPC64

 - fix buffer handling in libtraceevent

 - add a missing pointer derefence in perf probe

 - fix the build of host tools in cross builds

 - fix Intel PT timestamp handling

 - synchronize memcpy, cpufeatures and bpf headers with the kernel headers

 - support for vendor supplied JSON files describing PMU events

 - a new set of tool tips

 - initial work for clang/llvm support

 - address some style issues found by cppcheck

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
  tools build: Add feature detection for g++
  tools build: Support compiling C++ source file
  perf top/report: Add tips about a list option
  perf report/top: Add a tip about system-wide collection from all CPUs
  perf report/top: Add a tip about source line numbers with overhead
  tools: Synchronize tools/include/uapi/linux/bpf.h
  tools: Synchronize tools/arch/x86/include/asm/cpufeatures.h
  perf bench mem: Sync memcpy assembly sources with the kernel
  perf jevents: Fix Intel JSON fixed counter conversions
  tools lib traceevent: Fix kbuffer_read_at_offset()
  perf intel-pt: Fix MTC timestamp calculation for large MTC periods
  perf intel-pt: Fix estimated timestamps for cycle-accurate mode
  perf uretprobe ppc64le: Fix probe location
  perf pmu-events: Add Skylake frontend MSR support
  perf pmu-events: Fix fixed counters on Intel
  perf tools: Make alias matching case-insensitive
  perf tools: Allow period= in perf stat CPU event descriptions.
  perf tools: Add README for info on parsing JSON/map files
  perf list jevents: Add support for event list topics
  perf list: Support long jevents descriptions
  ...

Pull scheduler fix from Thomas Gleixner:
 "A revert of a commit which pointelessly widened a preempt disabled
  section which in turn caused might_sleep() to trigger.

  The patch intended to prevent usage of smp_processor_id() in
  preemptible context, but the usage in that case is fine because the
  thread is pinned on a single cpu and therefore cannot be migrated off"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "sched/core: Do not use smp_processor_id() with preempt enabled in smpboot_thread_fn()"

Pull irq fixes from Thomas Gleixner:
 "Two small kerneldoc fixes from Julia Lawall"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/metag-ext: Improve function-level documentation
  irqchip/vic: Improve function-level documentation

Pull timer fix from Thomas Gleixner:
 "A single fix for a regression introduced in 4.8 which causes the
  trace/perf clock to return random nonsense if CONFIG_DEBUG_TIMEKEEPING
  is set"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Fix __ktime_get_fast_ns() regression

Merge my system logging cleanups, triggered by the broken '\n' patches.

The line continuation handling has been broken basically forever, and
the code to handle the system log records was both confusing and
dubious.  And it would do entirely the wrong thing unless you always had
a terminating newline, partly because it couldn't actually see whether a
message was marked KERN_CONT or not (but partly because the LOG_CONT
handling in the recording code was rather confusing too).

This re-introduces a real semantically meaningful KERN_CONT, and fixes
the few places I noticed where it was missing.  There are probably more
missing cases, since KERN_CONT hasn't actually had any semantic meaning
for at least four years (other than the checkpatch meaning of "no log
level necessary, this is a continuation line").

This also allows the combination of KERN_CONT and a log level.  In that
case the log level will be ignored if the merging with a previous line
is successful, but if a new record is needed, that new record will now
get the right log level.

That also means that you can at least in theory combine KERN_CONT with
the "pr_info()" style helpers, although any use of pr_fmt() prefixing
would make that just result in a mess, of course (the prefix would end
up in the middle of a continuing line).

* printk-cleanups:
  printk: make reading the kernel log flush pending lines
  printk: re-organize log_output() to be more legible
  printk: split out core logging code into helper function
  printk: reinstate KERN_CONT for printing continuation lines

After backporting commit ee44b4bc ("dlm: use sctp 1-to-1 API")
series to a kernel with an older workqueue which didn't use RCU yet, it
was noticed that we are freeing the workqueues in dlm_lowcomms_stop()
too early as free_conn() will try to access that memory for canceling
the queued works if any.

This issue was introduced by commit 0d737a8c as before it such
attempt to cancel the queued works wasn't performed, so the issue was
not present.

This patch fixes it by simply inverting the free order.

Cc: stable@vger.kernel.org
Fixes: 0d737a8c ("dlm: fix race while closing connections")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>