An error occurred fetching the project authors.
- 09 Feb, 2012 40 commits
-
-
Lars-Peter Clausen authored
The current IIO event code uses a list to emulate FIFO like behavior. Just use a kfifo directly instead to implement the event queue. As part of this patch the maximum of events in the queue is increased from 10 to 16 since kfifo requires a power of two for the number of FIFO elements. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
The core iio file has gotten quite cluttered over time. This patch moves the event handling code into its own file. Since the event handling code is largely independent from the core code the only code changes necessary for this are to make the moved iio_device_register_eventset, iio_device_unregister_eventset and iio_event_getfd functions non static. This has also the advantage that industrialio-core.c is now closer again to its counterpart in the outofstaging branch. Signed-off-by:
-
Lars-Peter Clausen authored
The documentation for the iio_event_interface does not match the actual struct anymore. This patch removes the documentation for non-existing fields and adds documentation for missing fields. Signed-off-by:
-
Lars-Peter Clausen authored
Setup the buffer access functions in the buffer allocate function. There is no need to let each driver handle this on its own. Signed-off-by:
-
Olof Johansson authored
Just like isl29018; trivial addition. Using both asahi-kasei,ak8975 and the non-prefixed version (I couldn't figure out if Asahi Kasei had a stock symbol to use, I only found numerical indexes for their stock info). Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
-
Olof Johansson authored
As simple as can be right now; just one ID and no custom properties to parse. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Acked-by:
-
Dan Carpenter authored
These are bitfields and the intend was to OR them together. A logical OR here is simply 1. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
This patch is ported over by me (Ian Abbott) from the out-of-tree Comedi git repository at "git://comedi.org/git/comedi/comedi.git". The original patch is by Nicholas Nell. The patch adds support for trailing (falling) edge external triggers for scans in asynchronous command support in the ni_pcidio driver. This is supported at least on the PCI-DIO_32HS and PCI-6533 boards; not sure about the other boards. Signed-off-by:
-
Ian Abbott authored
This patch is ported over by me (Ian Abbott) from the out-of-tree Comedi git repository at "git://comedi.org/git/comedi/comedi.git". The original patch is by Nicholas Nell. The patch adds support for the COMEDI_POLL ioctl to the ni_pcidio driver. Signed-off-by:
-
Ian Abbott authored
When setting up the DMA for 'read' streaming acquisition command, grab the MITE channel spinlock before preparing and arming the DMA. Change inspired by ni_ai_setup_MITE_dma() in ni_mio_common.c. Signed-off-by:
-
Ian Abbott authored
When setting up the DMA for 'read' streaming acquisition on the DIO subdevice, mark the whole buffer as writable before starting the DMA. This prevents a spurious detection of a DMA overwrite of good data during the first interrupt. Problem reported by Nicholas Nell. Fix suggested by Frank Mori Hess. Signed-off-by:
-
Ian Abbott authored
This patch is ported over by me (Ian Abbott) from the out-of-tree Comedi git repository at "git://comedi.org/git/comedi/comedi.git". The original patch is by Nicholas Nell. ----- Advantech PCI-1739U support Hello, I've added a bit of simple configuration to adv_pci_dio.c in order to make the PCI-1739U work with the adv_pci_dio driver. I have tested inputs only so far but they seem to work. A git style patch is attached. Thanks, -- Nicholas Nell Professional Research Assistant University of Colorado ----- Signed-off-by:
-
Ian Abbott authored
The INSN_CONFIG handler for the DIO subdevice should error out for unsupported configuration instruction codes. Also fix incorrect use of constant COMEDI_OUTPUT where INSN_CONFIG_DIO_OUTPUT was meant. Signed-off-by:
-
Ian Abbott authored
Handle INSN_CONFIG_DIO_INPUT, INSN_CONFIG_DIO_OUTPUT and INSN_CONFIG_DIO_QUERY in data[0]. Signed-off-by:
-
Ian Abbott authored
Paul Fulmek reports that PXIe-6251 works the same as the existing PCIe-6251 and just needs the new PCI device ID adding to ni_pci_table[] and a new entry adding to ni_boards[] based on the existing entry for PCIe-6251. The new entry has PCI device ID 0x72e8 and board name "pxie-6251". Thanks Paul! Signed-off-by:
-
Dan Carpenter authored
We're getting the ssid length from the scan here. Let's cap it before doing the memcpy(). Signed-off-by:
-
Jesper Juhl authored
If allocating 'pdata_urb' fails, the function will return -ENOMEM without freeing the memory allocated, just a few lines above, for 'purb' and will leak that memory when 'purb' goes out of scope. This patch resolves the leak by freeing the allocated storage with usb_free_urb() before the return. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Masanari Iida authored
Correct spelling "suppported" to "supported" in drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c Signed-off-by: Masanari iida<standby24x7@gmail.com> Signed-off-by: -
Dan Carpenter authored
Bitwise OR was clearly intended here. Signed-off-by:
-
Tomas Winkler authored
Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
this example tries to connect to amt host interface client and retrieve versions of its sub components When AMT is enabled an output might look like that: Intel AMT: ENABLED Flash: 6.1.0 Netstack: 6.1.0 AMTApps: 6.1.0 AMT: 6.1.0 Sku: 258 VendorID: 8086 Build Number: 1042 Recovery Version: 6.1.0 Recovery Build Num: 1042 Legacy Mode: False otherwise: Intel AMT: DISABLED Signed-off-by:
-
Tomas Winkler authored
1. convert all read buffers to unsigned char and drop useless castings 2. simplify mei_read_slots implementation Signed-off-by:
-
Tomas Winkler authored
1. Update Copyright to 2012 2. Also fix mei.h copyright format checkpaatch complained: WARNING: please, no spaces at the start of a line Signed-off-by:
-
Kashyap Gada authored
This is a patch to the ft1000_proc.c that fixes up space required after ',' errors found by the checkpatch.pl tool Signed-off-by:
Kashyap Gada <gada.kashyap@gmail.com> Signed-off-by:
-
Bart Westgeest authored
Signed-off-by:
Bart Westgeest <bart@elbrys.com> Signed-off-by:
-
Bart Westgeest authored
The function usbip_pad_iso never returns anything but 0 (success). Signed-off-by:
-
Bart Westgeest authored
Signed-off-by:
-
Thomas Meyer authored
The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Márton Németh authored
This will remove the following checkpatch.pl error: ERROR: "foo * bar" should be "foo *bar" Signed-off-by:
Márton Németh <nm127@freemail.hu> Acked-by:
edwin_rong <edwin_rong@realsil.com.cn> Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
Szymon Janc <szymon@janc.net.pl> Signed-off-by:
-
Víctor Manuel Jáquez Leal authored
Since all the asserts and DBC macros are gone, the kconfig macro CONFIG_TIDSPBRIDGE_DEBUG is not almost used, but for printing trace messages. Since it is almost not used, I don't see any case for keep it churning the configuration menu. This patch removes completely the kconfig macro CONFIG_TIDSPBRIDGE_DEBUG, using only TIDSPBRIDGE_BACKTRACE for enabling the debug trace messages. Signed-off-by:
Víctor Manuel Jáquez Leal <vjaquez@igalia.com> Signed-off-by:
-
Víctor Manuel Jáquez Leal authored
All the macros in dbc.h are removed now so this patch removes it completely. Signed-off-by:
-
Víctor Manuel Jáquez Leal authored
This macro is only valid when CONFIG_TIDSPBRDIGE_DEBUG is enabled and it only prints a log message, it is not a real assertion mechanism like BUG_ON() or WARN_ON(). It is better to remove them: less code to maintain. Signed-off-by:
-
Víctor Manuel Jáquez Leal authored
The kernel does not use a "Design by Contract" approach, and it is only activated in the module if CONFIG_TIDSPBRDIGE_DEBUG is enabled, so they are executed rarely. It is better to remove them: less code to maintain. Signed-off-by:
-
Joe Perches authored
tidspbridge when built as a module is named bridgedriver. bridgedriver is not a particularly good module name. tidspbridge is what the source is named. That seems a more appropriate module name too as it describes the hardware function better. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by:
Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by:
-
Víctor Manuel Jáquez Leal authored
Instead of assign it to a global variable which is not used anymore. Signed-off-by: -
Víctor Manuel Jáquez Leal authored
The variable offset is not used but in the debug log, so I don't see reason to calculate it here. Signed-off-by:
-
Víctor Manuel Jáquez Leal authored
The function dsp_deinit() always return true, so assert its output is pointless. As consequence the variable were the returned value is stored, is no longer needed. Signed-off-by:
-
Víctor Manuel Jáquez Leal authored
drv_interface.c include several header files that are not really used. Signed-off-by:
-
Víctor Manuel Jáquez Leal authored
When compiling this report is raised by the compiler: CC [M] drivers/staging/tidspbridge/rmgr/drv_interface.o drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'bridge_mmap': drivers/staging/tidspbridge/rmgr/drv_interface.c:275:2: warning: format '%lx' expects type 'long unsigned int', but argument 9 has type 'pgprot_t' This patch fixes that warning message. Signed-off-by:
-
