Add support for reporting thermal throttling events through SMI.
Also, add a counter to count the number of throttling interrupts
observed and report the count in the SMI event message.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover,
the atomic adev->in_gpu_reset and hive->in_reset are used to avoid
re-entering GPU recovery.

During GPU reset and resume, it is unsafe that other threads access GPU,
which maybe cause GPU reset failed. Therefore the new rw_semaphore
adev->reset_sem is introduced, which protect GPU from being accessed by
external threads during recovery.

v2:
1. add rwlock for some ioctls, debugfs and file-close function.
2. change to use dqm->is_resetting and dqm_lock for protection in kfd
driver.
3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid
re-enter GPU recovery for the same GPU hang.

v3:
1. change back to use adev->reset_sem to protect kfd callback
functions, because dqm_lock couldn't protect all codes, for example:
free_mqd must be called outside of dqm_lock;

[ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019
[ 1230.177221] Call Trace:
[ 1230.178249]  dump_stack+0x98/0xd5
[ 1230.179443]  amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu]
[ 1230.180673]  gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu]
[ 1230.181882]  amdgpu_gart_unbind+0xa9/0xe0 [amdgpu]
[ 1230.183098]  amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu]
[ 1230.184239]  ? ttm_bo_put+0x171/0x5f0 [ttm]
[ 1230.185394]  ttm_tt_unbind+0x21/0x40 [ttm]
[ 1230.186558]  ttm_tt_destroy.part.12+0x12/0x60 [ttm]
[ 1230.187707]  ttm_tt_destroy+0x13/0x20 [ttm]
[ 1230.188832]  ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm]
[ 1230.189979]  ttm_bo_put+0x1be/0x5f0 [ttm]
[ 1230.191230]  amdgpu_bo_unref+0x1e/0x30 [amdgpu]
[ 1230.192522]  amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu]
[ 1230.193833]  free_mqd+0x25/0x40 [amdgpu]
[ 1230.195143]  destroy_queue_cpsch+0x1a7/0x270 [amdgpu]
[ 1230.196475]  pqm_destroy_queue+0x105/0x260 [amdgpu]
[ 1230.197819]  kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu]
[ 1230.199154]  kfd_ioctl+0x277/0x500 [amdgpu]
[ 1230.200458]  ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu]
[ 1230.201656]  ? tomoyo_file_ioctl+0x19/0x20
[ 1230.202831]  ksys_ioctl+0x98/0xb0
[ 1230.204004]  __x64_sys_ioctl+0x1a/0x20
[ 1230.205174]  do_syscall_64+0x5f/0x250
[ 1230.206339]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

2. remove try_lock and introduce atomic hive->in_reset, to avoid
re-enter GPU recovery.

v4:
1. remove an unnecessary whitespace change in kfd_chardev.c
2. remove comment codes in amdgpu_device.c
3. add more detailed comment in commit message
4. define a wrap function amdgpu_in_reset

v5:
1. Fix some style issues.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Suggested-by: Luben Tukov <luben.tuikov@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The variable result is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

vcn ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

jpeg ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add some padding before the MODE register in the HWREGs block to
preserve the same layout as gfx9. This simplifies implementation of a
user-mode debugger.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

vcn ip block is already selected based on ASIC type during set_ip_blocks
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

jpeg ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We expose the actual memory controller clock rate in Linux,
not the effective memory clock of the DRAMs.  To translate
it, it follows the following formula:

Clock conversion (Mhz):
HBM: effective_memory_clock = memory_controller_clock * 1
G5:  effective_memory_clock = memory_controller_clock * 1
G6:  effective_memory_clock = memory_controller_clock * 2

DRAM data rate (MT/s):
HBM: effective_memory_clock * 2 = data_rate
G5:  effective_memory_clock * 4 = data_rate
G6:  effective_memory_clock * 8 = data_rate

Bandwidth (MB/s):
data_rate * vram_bit_width / 8 = memory_bandwidth

Some examples:
G5 on RX460:
memory_controller_clock = 1750 Mhz
effective_memory_clock = 1750 Mhz * 1 = 1750 Mhz
data rate = 1750 * 4 = 7000 MT/s
memory_bandwidth = 7000 * 128 bits / 8 = 112000 MB/s

G6 on RX5600:
memory_controller_clock = 900 Mhz
effective_memory_clock = 900 Mhz * 2 = 1800 Mhz
data rate = 1800 * 8 = 14400 MT/s
memory_bandwidth = 14400 * 192 bits / 8 = 345600 MB/s
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix below warnings reported by coccicheck:
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c:557:2-7: WARNING: NULL check before some freeing functions is not needed.

Fixes: 4d55b0dd ("drm/amd/display: Add DCN3 CLK_MGR")
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

certain umc macros are common across umc versions
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update golden setting for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set valid_in_vf to false for the message not support in vf mode on
sienna cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Mapping Mode1Reset message for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some asic may not support for some message of set mp1 state.
If the return value of smu_send_smc_msg is -EINVAL, that means it failed
to send msg to smc as it can not map an valid message for the ASIC. And
with that case, smu_set_mp1_state should be skipped as those ASIC was in
fact do not support for that.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm_atomic_crtc_check enforces that ::active can only be true if
::enable is as well.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's not necessary to retrieve the power features status when the
asic is booted up the first time. This patch can have the features
enablement status still checked in suspend/resume case and removed
from the first boot up sequence.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix this warning:

  CC [M]  drivers/gpu/drm/amd/amdgpu/gfxhub_v1_1.o
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
                 from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_pmc_get_count’:
./include/drm/drm_print.h:487:2: warning: ‘hi_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  487 |  __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
      |  ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:25: note: ‘hi_base_addr’ was declared here
  649 |  uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;
      |                         ^~~~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
                 from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
./include/drm/drm_print.h:487:2: warning: ‘lo_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  487 |  __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
      |  ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:11: note: ‘lo_base_addr’ was declared here
  649 |  uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

All gc/mmhub register access and operation should be in gfxhub/mmhub level.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to move get_invalidate_req into gfxhub/mmhub level. It will avoid
mismatch of the different gfxhub/mmhub register offsets and fields in the same
gmc block.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to introduce vmhub funcs helper to add following callback
(print_l2_protection_fault_status). Each GC/MMHUB register specific programming
should be in gfxhub/mmhub level.

v2: remove the condition of funcs assignment.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to add set_vm_fault_masks helper to amdgpu_gmc to refine the
original programming.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds a member in vmhub structure to store the vm fault interrupt
masks for different version gfxhubs/mmhubs.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The below 3 messages are not supported on Renoir
SMU_MSG_PrepareMp1ForShutdown
SMU_MSG_PrepareMp1ForUnload
SMU_MSG_PrepareMp1ForReset

It needs to revert patch:
drm/amd/powerplay: drop unnecessary message support check
to avoid set mp1 state fail during gpu reset on renoir.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This will tell users if the faulty page has been written to
external eeprom device in dmesg log.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Added dedicated 64bit reg read/write support
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v3:
* Rebase (Manasi)
v2:
* Rebase (Manasi)

As both VRR min and max are already part of drm_display_info,
drm can expose this VRR range for each connector.

Hence this logic should move to core DRM.

This reverts commit 727962f0.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: AMD gfx <amd-gfx@lists.freedesktop.org>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable SMU i2c bus access for sienna_cichlid asics.

v2: change callback name
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable SMU i2c bus access for navi1x asics.

v2: add missing implementation
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The driver uses it for EEPROM access, but it's just an i2c bus.

v2: change the callback name as well.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There is no longer a ras dependency so it's safe to expose
on all boards.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The driver uses it for EEPROM access, but it's just an i2c bus.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's not really ras related.  It's just a lock for the
bus in general.  This removes the ras dependency from
the smu i2c bus.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

NULL dereference occurs when string that is not ended with space or
newline is written to some dpm sysfs interface (for example pp_dpm_sclk).
This happens because strsep replaces the tmp with NULL if the delimiter
is not present in string, which is then dereferenced by tmp[0].

Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'
Signed-off-by: Paweł Gronowski <me@woland.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and
vddci_voltage_table is empty. It has been tested on Intel Hades Canyon
(i7-8809G).

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489
Fixes: ac7822b0 ("drm/amd/powerplay: add smumgr support for VEGAM (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To accommodate VCN instances variance, otherwise it may trigger
smu response error for configuration with less instances.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's in accordance with pmfw 65.3.0 for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It should be DCLK1->PPCLK_DCLK_1 and VCLK->PPCLK_VCLK_0.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>