- 16 Oct, 2018 40 commits
-
-
Michael Chan authored
On the new 57500 chips, getting the associated CP ring ID associated with an RX ring or TX ring is different than before. On the legacy chips, we find the associated ring group and look up the CP ring ID. On the 57500 chips, each RX ring and TX ring has a dedicated CP ring even if they share the MSIX. Use these helper functions at appropriate places to get the CP ring ID. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
On 57500 chips, the original bnxt_cp_ring_info struct now refers to the NQ. bp->cp_nr_rings refer to the number of NQs on 57500 chips. There are now 2 pointers for the CP rings associated with RX and TX rings. Modify bnxt_alloc_cp_rings() and bnxt_free_cp_rings() accordingly. With multiple CP rings per NAPI, we need to add a pointer in bnxt_cp_ring_info struct to point back to the bnxt_napi struct. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The ring reservation functions have to be modified for P5 chips in the following ways: - bnxt_cp_ring_info structs map to internal NQs as well as CP rings. - Ring groups are not used. - 1 CP ring must be available for each RX or TX ring. - number of RSS contexts to reserve is multiples of 64 RX rings. - RFS currently not supported. Also, RX AGG rings are only used for jumbo frames, so we need to unconditionally call bnxt_reserve_rings() in __bnxt_open_nic() to see if we need to reserve AGG rings in case MTU has changed. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Store the maximum MSIX capability in PCIe config. space earlier. When we call firmware to query capability, we need to compare the PCIe MSIX max count with the firmware count and use the smaller one as the MSIX count for 57500 (P5) chips. The new chips don't use ring groups. But previous chips do and the existing logic limits the available rings based on resource calculations including ring groups. Setting the max ring groups to the max rx rings will work on the new chips without changing the existing logic. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The 57500 series chips have a new 64-bit doorbell format. Use a new bnxt_db_info structure to unify the new and the old 32-bit doorbells. Add a new bnxt_set_db() function to set up the doorbell addreses and doorbell keys ahead of time. Modify and introduce new doorbell helpers to help abstract and unify the old and new doorbells. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
57500 series is a new chip class (P5) that requires some driver changes in the next several patches. This adds basic chip ID, doorbells, and the notification queue (NQ) structures. Each MSIX is associated with an NQ instead of a CP ring in legacy chips. Each NQ has up to 2 associated CP rings for RX and TX. The same bnxt_cp_ring_info struct will be used for the NQ. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Call firmware to configure the DMA addresses of all context memory pages on new devices requiring context memory. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
New device requires host context memory as a backing store. Call firmware to check for context memory requirements and store the parameters. Allocate host pages accordingly. We also need to move the call bnxt_hwrm_queue_qportcfg() earlier so that all the supported hardware queues and the IDs are known before checking and allocating context memory. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Newer chips require the PTU_PTE_VALID bit to be set for every page table entry for context memory and rings. Additional bits are also required for page table entries for all rings. Add a flags field to bnxt_ring_mem_info struct to specify these additional bits to be used when setting up the pages tables as needed. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Move the DMA page table and vmem fields in bnxt_ring_struct to a new bnxt_ring_mem_info struct. This will allow context memory management for a new device to re-use some of the existing infrastructure. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
New firmware spec. allows interrupt coalescing parameters, such as maximums, timer units, supported features to be queried. Update the driver to make use of the new call to query these parameters and provide the legacy defaults if the call is not available. Replace the hard-coded values with these parameters. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Support the max_ext_req_len field from the HWRM_VER_GET_RESPONSE. If this field is valid and greater than the mailbox size, use the short command format to send firmware messages greater than the mailbox size. Newer devices use this method to send larger messages to the firmware. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Latest firmware spec. has some additional rx extended port stats and new tx extended port stats added. We now need to check the size of the returned rx and tx extended stats and determine how many counters are valid. New counters added include CoS byte and packet counts for rx and tx. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Among the new changes are trusted VF support, 200Gbps support, and new API to dump ring information on the new chips. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stefano Brivio says: ==================== selftests: pmtu: Add test choice and captures This series adds a couple of features useful for debugging: 1/2 allows selecting single tests and 2/2 adds optional traffic captures. Semantics for current invocation of test script are preserved. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
If --trace is passed as an option and tcpdump is available, capture traffic for all relevant interfaces to per-test pcap files named <test>_<interface>.pcap. Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
As number of tests is growing, it's quite convenient to allow single tests to be run. Display usage when the script is run with any invalid argument, keep existing semantics when no arguments are passed so that automated runs won't break. Instead of just looping on the list of requested tests, if any, check first that they exist, and go through them in a nested loop to keep the existing way to display test descriptions. Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
netif_device_detach() stops all tx queues already, so we don't need this call. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Simplify this function, no functional change intended. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The newly added driver causes a warning about a function that is not used anywhere: drivers/net/ethernet/marvell/octeontx2/af/cgx.c:320:12: error: 'cgx_fwi_link_change' defined but not used [-Werror=unused-function] Remove it for now, until a user gets added. If we want to use this function from another module, we also need a declaration in a header file, which is currently missing, so it would have to change anyway. Fixes: 1463f382 ("octeontx2-af: Add support for CGX link management") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ryan C Goodfellow authored
This commit makes it possible to use devlink to split the 100G CXP Netronome into two 40G interfaces. Currently when you ask for 2 interfaces, the math in src/nfp_devlink.c:nfp_devlink_port_split calculates that you want 5 lanes per port because for some reason eth_port.port_lanes=10 (shouldn't this be 12 for CXP?). What we really want when asking for 2 breakout interfaces is 4 lanes per port. This commit makes that happen by calculating based on 8 lanes if 10 are present. Signed-off-by:
Ryan C Goodfellow <rgoodfel@isi.edu> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Greg Weeks <greg.weeks@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: code cleanup There are no functional changes in this patch set, only some cleanup changes such as: unused parameters, uninitialized variables and unnecessary Kconfig dependencies. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
According to the hardware ArchDef, the PTV1 field in FD[CTRL] is ignored by WRIOP, so setting it for Tx FDs is pointless. Remove all references to it from the code. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The ch parameter is never used in the dpaa2_eth_tx_conf function but since its prototype must match the type defined in the consume field of struct dpaa2_eth_fq, just mark it as __always_unused. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The priv parameter is never used in the build_linear_skb and drain_channel function. Remove it from the function definitions. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
All 3 cases of possible uninitialized variables are false positives since they are used only as output parameters. Nonetheless, fix the warnings. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The dpaa2_eth_set_dist_key function is only used in a single file. Make it static. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
Both ARCH_LAYERSCAPE and COMPILE_TEST dependencies are already implied through the FSL_MC_BUS dep, so there's no need to state it explicitly. Also, the fsl-mc bus depends on COMPILE_TEST only for some architectures (arm, arm64, ppc, x86), so it's not correct to claim build support unconditionally. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
In dual-emac mode the cpsw driver sends directed packets, that means that packets go to the directed port, but an ALE lookup is performed to determine untagged egress only. It means that on tx side no need to add port bit for ALE mcast entry mask, and basically ALE entry for port identification is needed only on rx side. So, add only host port in dual_emac mode as used directed transmission, and no need in one more port. For single port boards and switch mode all ports used, as usual, so no changes for them. Also it simplifies farther changes. In other words, mcast entries for dual-emac should behave exactly like unicast. It also can help avoid leaking packets between ports with same vlan on h/w level if ports could became members of same vid. So now, for instance, if mcast address 33:33:00:00:00:01 is added then entries in ALE table: vid = 1, addr = 33:33:00:00:00:01, port_mask = 0x1 vid = 2, addr = 33:33:00:00:00:01, port_mask = 0x1 Instead of: vid = 1, addr = 33:33:00:00:00:01, port_mask = 0x3 vid = 2, addr = 33:33:00:00:00:01, port_mask = 0x5 With the same considerations, set only host port for unregistered mcast for dual-emac mode in case of IFF_ALLMULTI is set, exactly like it's done in cpsw_ale_set_allmulti(). Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ivan Khoronzhuk says: ==================== net: ethernet: ti: cpsw fix mcast packet lost The patchset omits redundant refresh of mcast address table and prevents mcast packet lost. Based on net-next/master tested on am572x evm ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
Whenever kernel or user decides to call rx mode update, it clears every multicast entry from forwarding table and in some time adds it again. This time can be enough to drop incoming multicast packets. That's why clear only staled multicast entries and update or add new one afterwards. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
It allows to use function under callbacks with same const qualifier of mac address for farther changes. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: improve and simplify state machine Improve / simplify handling of states PHY_RUNNING and PHY_RESUMING in phylib state machine. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Simplify code for handling state PHY_RESUMING, no functional change intended. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Handling of state PHY_RUNNING seems to be more complex than it needs to be. If not polling, then we don't have to do anything, we'll receive an interrupt and go to state PHY_CHANGELINK once the link goes down. If polling and link is down, we don't have to go the extra mile over PHY_CHANGELINK and call phy_read_status() again but can set status PHY_NOLINK directly. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This makes use of NTF_USE in vxlan driver consistent with bridge driver. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Justin.Lee1@Dell.com authored
The new command (NCSI_CMD_SEND_CMD) is added to allow user space application to send NC-SI command to the network card. Also, add a new attribute (NCSI_ATTR_DATA) for transferring request and response. The work flow is as below. Request: User space application -> Netlink interface (msg) -> new Netlink handler - ncsi_send_cmd_nl() -> ncsi_xmit_cmd() Response: Response received - ncsi_rcv_rsp() -> internal response handler - ncsi_rsp_handler_xxx() -> ncsi_rsp_handler_netlink() -> ncsi_send_netlink_rsp () -> Netlink interface (msg) -> user space application Command timeout - ncsi_request_timeout() -> ncsi_send_netlink_timeout () -> Netlink interface (msg with zero data length) -> user space application Error: Error detected -> ncsi_send_netlink_err () -> Netlink interface (err msg) -> user space application Signed-off-by:
Justin Lee <justin.lee1@dell.com> Reviewed-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
When starting the state machine there may be work to be done immediately, e.g. if the initial state is PHY_UP then the state machine may trigger an autonegotiation. Having said that I see no need to wait a second until the state machine is run first time. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Toshiaki Makita says: ==================== veth: XDP stats improvement ndo_xdp_xmit in veth did not update packet counters as described in [1]. Also, current implementation only updates counters on tx side so rx side events like XDP_DROP were not collected. This series implements the missing accounting as well as support for ethtool per-queue stats in veth. Patch 1: Update drop counter in ndo_xdp_xmit. Patch 2: Update packet and byte counters for all XDP path, and drop counter on XDP_DROP. Patch 3: Support per-queue ethtool stats for XDP counters. Note that counters are maintained on per-queue basis for XDP but not otherwise (per-cpu and atomic as before). This is because 1) tx path in veth is essentially lockless so we cannot update per-queue stats on tx, and 2) rx path is net core routine (process_backlog) which cannot update per-queue based stats when XDP is disabled. On the other hand there are real rxqs and napi handlers for veth XDP, so update per-queue stats on rx for XDP packets, and use them to calculate tx counters as well, contrary to the existing non-XDP counters. [1] https://patchwork.ozlabs.org/cover/953071/#1967449 ==================== Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Toshiaki Makita authored
Expose per-queue stats for ethtool -S. As there are only rx queues, and rx queues are used only when XDP is used, per-queue counters are only rx XDP ones. Example: $ ethtool -S veth0 NIC statistics: peer_ifindex: 11 rx_queue_0_xdp_packets: 28601434 rx_queue_0_xdp_bytes: 1716086040 rx_queue_0_xdp_drops: 28601434 rx_queue_1_xdp_packets: 17873050 rx_queue_1_xdp_bytes: 1072383000 rx_queue_1_xdp_drops: 17873050 Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
David S. Miller <davem@davemloft.net>
-