- 13 Oct, 2011 13 commits
-
-
Felipe Balbi authored
with this patch we can finally remove the global "the_controller" pointer. Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
in most cases, we can fetch our structure by calling dev_get_drvdata(). Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Schwebel authored
While being there, change C++ style comments to /* */. Signed-off-by:
Robert Schwebel <r.schwebel@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Arnd Bergmann authored
A recent commit obsoleted the is_vbus_present function, so we must not use it any more. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Paul Zimmerman authored
The Synopsys USB device controller requires all OUT transfer request lengths to be aligned to max packet size. The mass storage gadgets do not meet this requirement for Super Speed. The gadgets already have a function which performs this alignment for CBW packets, so use it for data packets too. The alternative would be to implement bounce buffers in the DWC3 driver, but that could have a significant impact on performance. This version is based upon a more-correct patch written by Alan Stern. Signed-off-by:
Paul Zimmerman <paulz@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Daniel Mack authored
The code in the MIDI gadget was already sort of prepared for multi-port configuration, so the streaming logic itself didn't need much tweaking. However, the descriptors change when the number of ports do, and so some rework of the the preparation algorithms were necessary. Successfully tested on Linux and Max OS X hosts for both input and output streams. Signed-off-by:
Daniel Mack <zonque@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Daniel Mack authored
Make use of the newly added MIDI function in f_midi.c and strip down the MIDI gadget code radically. Also use the generic framework function to avoid code duplication and rename some symbols to bring them in sync with other code in the gadget framework. [ balbi@ti.com : fix Section mismatch warnings. rebased on top of usb_speed_string() patch to avoid conflicts. ] Signed-off-by:
Daniel Mack <zonque@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Daniel Mack authored
This patch adds f_midi.c to implement a USB gadget function that works with the composite framework, so it can be combined with other USB functions. The code for the ALSA/MIDI logic was taken from the midi device gadget, other parts have been rewritten to benefit from the dynamic descriptor allocation features. This was successfully tested on an OMAP3 board. Signed-off-by:
Daniel Mack <zonque@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Randy Dunlap authored
Move function to fix langwell_udc.c build error: drivers/usb/gadget/langwell_udc.c: In function 'show_langwell_udc': drivers/usb/gadget/langwell_udc.c:1693:3: error: implicit declaration of function 'lpm_device_speed' drivers/usb/gadget/langwell_udc.c: At top level: drivers/usb/gadget/langwell_udc.c:2637:37: error: conflicting types for 'lpm_device_speed' drivers/usb/gadget/langwell_udc.c:1693:20: note: previous implicit declaration of 'lpm_device_speed' was here Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
Felipe Balbi <balbi@ti.com> Cc: linux-usb@vger.kernel.org
-
Yoshihiro Shimoda authored
SH7757 has a USB function with internal DMA controller (SUDMAC). This patch supports the SUDMAC. The SUDMAC is incompatible with general-purpose DMAC. So, it doesn't use dmaengine. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Yoshihiro Shimoda authored
This patch also fix the balance of braces. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Yoshihiro Shimoda authored
R8A66597 has the pin of WR0 and WR1. So, if one write-pin of CPU connects to the pins, we have to change the setting of FIFOSEL register in the controller. If we don't change the setting, the controller cannot send the data of odd length. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Yoshihiro Shimoda authored
Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
- 10 Oct, 2011 1 commit
-
-
Harro Haan authored
The Kirkwood gave an unaligned memory access error on line 742 of drivers/usb/host/echi-hcd.c: "ehci->last_periodic_enable = ktime_get_real();" Signed-off-by:
Harro Haan <hrhaan@gmail.com> Cc: stable <stable@kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
- 04 Oct, 2011 18 commits
-
-
Hakan Kvist authored
Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban Signed-off-by:
Hakan Kvist <hakan.kvist@sonyericsson.com> Signed-off-by:
Oskar Andero <oskar.andero@sonyericsson.com> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Gortmaker authored
These files uses the full set of MODULE_ macros and so need to include module.h directly. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
our parameter structures need to be written to HW, so instead of assuming little endian, we convert those into bit shifts. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
The dwc3 core has internal clock gating support. Let's allow that to happen by clearing the disable bit in GCTL register. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
cache the contents of GHWPARAMS* registers in our device structure for easy access. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
That structure will hold a copy of readonly GHWPARAMS* registers for ease accessing by the driver. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
The following patch adds support for streams to dwc3 driver. While at that, also fix one small issue on endpoint disable where we should clear all flags not only ENABLED. Reviewied-by:
Paul Zimmerman <paulz@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
We already have the value from gadget drivers, just need to pass it to our controller. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Zimmerman authored
Fix offset calculation in dwc3_trb_dma_offset() Signed-off-by:
Paul Zimmerman <paulz@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Zimmerman authored
This makes DWC3_EP_WEDGE do the right thing, which is prevent DWC3_EP_WEDGE from ever being cleared by a ClearFeature(HALT) command. [ balbi@ti.com : allowed set_wedge to send SetHalt command to controller ] Signed-off-by:
Paul Zimmerman <paulz@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Zimmerman authored
An older version of the databook said to wait for the FIFO to drain, but that has been removed from the newer databooks. Waiting for RxFIFO to drain caused problems when testing against one of the host controllers available in the market. After talking to one of the RTL engineers, he stated that we should _not_ wait for RxFIFO to drain. Signed-off-by:
Paul Zimmerman <paulz@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Zimmerman authored
DEPSTARTCFG for non-EP0 EPs must only be sent once per config [ balbi@ti.com : changed config_start to start_config_issued ] Signed-off-by:
Paul Zimmerman <paulz@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sebastian Andrzej Siewior authored
Some people think that this line is not compatible with the GPL. The statement was required due to the Buenos Aires Convention and is now deprecated. I remove it because it is said that it is pointless nowdays. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sebastian Andrzej Siewior authored
Use "ep0in" and "ep0out" instead "ep1in" and "ep0out" which is confusing and not consistent with the remaining output. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sebastian Andrzej Siewior authored
We already give requests back in dwc3_ep0_stall_and_restart() so doing it again here will most likely corrupt the list. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
The way it was before was really meaningless. Now it looks saner. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
We don't need to care about direction on a two stage transfer. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
According to USB 3.0 Specification, a SetAddress() while device is in Configured State has an unspecified behavior (see Section 9.4.6). Still USB30CV wasn't happy with my Stall reply. To make that thing happy, just accept the SetAddress() always. No problems have been observed thus far. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
- 29 Sep, 2011 4 commits
-
-
Jon Levell authored
My webcam is a Logitech C300 and I get "chipmunk"ed squeaky sound. The following trivial patch fixes it. Signed-off-by:
Jon Levell <linuxusb@coralbark.net> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Serge Hallyn authored
Add to the dev_state and alloc_async structures the user namespace corresponding to the uid and euid. Pass these to kill_pid_info_as_uid(), which can then implement a proper, user-namespace-aware uid check. Changelog: Sep 20: Per Oleg's suggestion: Instead of caching and passing user namespace, uid, and euid each separately, pass a struct cred. Sep 26: Address Alan Stern's comments: don't define a struct cred at usbdev_open(), and take and put a cred at async_completed() to ensure it lasts for the duration of kill_pid_info_as_cred(). Signed-off-by:
Serge Hallyn <serge.hallyn@canonical.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Carpenter authored
"length" is type size_t so the cast to unsigned int truncates the upper bytes. This isn't an issue in real life (I've checked the callers) but it's a bit messy. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Rigbert Hamisch authored
add device ID for "HP un2430 Mobile Broadband Module" Signed-off-by:
Rigbert Hamisch <rigbert@gmx.de> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
- 26 Sep, 2011 4 commits
-
-
Matthias Dellweg authored
In the usb printer class specific request get_device_id the value of wIndex is (interface << 8 | altsetting) instead of just interface. This enables the detection of some printers with libusb. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Matthias Dellweg <2500@gmx.de> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Serge Hallyn authored
Alan Stern points out that after spin_unlock(&ps->lock) there is no guarantee that ps->pid won't be freed. Since kill_pid_info_as_uid() is called after the spin_unlock(), the pid passed to it must be pinned. Reported-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Serge Hallyn <serge.hallyn@canonical.com> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1488) improves the comments and logic in uhci-hcd's suspend routine. The existing comments are hard to understand and don't give a good idea of what's really going on. The question of whether EGSM (Enter Global Suspend Mode) and RD (enable Resume Detect interrupts) can be useful when they're not both set is difficult. The spec doesn't give any details on how they interact with system wakeup, although clearly they are meant to be used together. To be safe, the patch changes the subroutine so that neither bit gets set unless they both do. There shouldn't be any functional changes from this; only systems that are designed badly or broken in some way need to avoid using those bits. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1486) implements the kernel's new wakeup policy for USB host controllers. Since they don't generate wakeup requests on their but merely forward requests from their root hubs toward the CPU, they should be enabled for wakeup by default. Also, to be compliant with both the old and new policies, root hubs should not be enabled for remote wakeup by default. Userspace must enable it explicitly if it is desired. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-