- 08 Oct, 2013 4 commits
-
-
Eric Dumazet authored
qdisc_tree_decrease_qlen() is called when some packets are dropped on a qdisc, and we want to notify parents of qlen changes. We also can increment parents qdisc qstats drop counters. This permits more accurate drop counters up to root qdisc. For example a graft operation typically resets a qdisc (drops all packets) and call qdisc_tree_decrease_qlen() Note that callers are responsible for their drop counters. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Currently, in TLB mode we change mac addresses only by memcpy-ing the to net_device->dev_addr, without actually setting them via dev_set_mac_address(). This permits us to receive all the traffic always on one mac address. However, in case the interface flips, some drivers might enforce the mac filtering for its FW/HW based on current ->dev_addr, and thus we won't be able to receive traffic on that interface, in case it will be selected as active in TLB mode. Fix it by setting the mac address forcefully on every new active slave that we select in TLB mode. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Yuval Mintz <yuvalmin@broadcom.com> Reported-by: Yuval Mintz <yuvalmin@broadcom.com> Tested-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masatake YAMATO authored
ip link has ability to show extra information of net work device if kernel provides sunh information. With this patch veth driver can provide its peer ifindex information to ip command via netlink interface. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Liu authored
This reverts commit 4f0581d2. The named changeset is causing problem. Let's aim to make this part less fragile before trying to improve things. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Annie Li <annie.li@oracle.com> Cc: Matt Wilson <msw@amazon.com> Cc: Xi Xiong <xixiong@amazon.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Paul Durrant <paul.durrant@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Oct, 2013 7 commits
-
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthew Whitehead authored
There no longer are ISA drivers in the fujitsu directory, so remove the dependency from the Kconfig. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
Conflicts: drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h drivers/net/wireless/rtlwifi/rtl8188ee/phy.h drivers/net/wireless/rtlwifi/rtl8192ce/phy.h drivers/net/wireless/rtlwifi/rtl8192de/phy.h drivers/net/wireless/rtlwifi/rtl8723ae/phy.h Just some minor conflicts between the wireless-next changes and Joe Perches's "extern" removal from function prototypes in header files. John W. Linville says: ==================== Regarding the Bluetooth bits, Gustavo says: "The big work here is from Marcel and Johan. They did a lot of work in the L2CAP, HCI and MGMT layers. The most important ones are the addition of a new MGMT command to enable/disable LE advertisement and the introduction of the HCI user channel to allow applications to get directly and exclusive access to Bluetooth devices." As to the ath10k bits, Kalle says: "Bartosz dropped support for qca98xx hw1.0 hardware from ath10k, it's just too much to support it. Michal added support for the new firmware interface. Marek fixed WEP in AP and IBSS mode. Rest of the changes are minor fixes or cleanups." And also: "Major changes are: * throughput improvements including aligning the RX frames correctly and optimising HTT layer (Michal) * remove qca98xx hw1.0 support (Bartosz) * add support for firmware version 999.999.0.636 (Michal) * firmware htt statistics support (Kalle) * fix WEP in AP and IBSS mode (Marek) * fix a mutex unlock balance in debugfs file (Shafi) And of course there's a lot of smaller fixes and cleanup." For the wl12xx bits, Luca says: "Here are some patches intended for 3.13. Eliad is upstreaming a bunch of patches that have been pending in the internal tree. Mostly bugfixes and other small improvements." Along with that... Arend and friends bring us a batch of brcmfmac updates, Larry Finger offers some rtlwifi refactoring, and Sujith sends the usual batch of ath9k updates. As usual, there are a number of other small updates from a variety of players as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Separate the unreg_list and the close_list in dev_close_many preventing dev_close_many from permuting the unreg_list. The permutations of the unreg_list have resulted in cases where the loopback device is accessed it has been freed in code such as dst_ifdown. Resulting in subtle memory corruption. This is the second bug from sharing the storage between the close_list and the unreg_list. The issues that crop up with sharing are apparently too subtle to show up in normal testing or usage, so let's forget about being clever and use two separate lists. v2: Make all callers pass in a close_list to dev_close_many Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Oct, 2013 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter updates for your net-next tree, mostly ipset improvements and enhancements features, they are: * Don't call ip_nest_end needlessly in the error path from me, suggested by Pablo Neira Ayuso, from Jozsef Kadlecsik. * Fixed sparse warnings about shadowed variable and missing rcu annotation and fix of "may be used uninitialized" warnings, also from Jozsef. * Renamed simple macro names to avoid namespace issues, reported by David Laight, again from Jozsef. * Use fix sized type for timeout in the extension part, and cosmetic ordering of matches and targets separatedly in xt_set.c, from Jozsef. * Support package fragments for IPv4 protos without ports from Anders K. Pedersen. For example this allows a hash:ip,port ipset containing the entry 192.168.0.1,gre:0 to match all package fragments for PPTP VPN tunnels to/from the host. Without this patch only the first package fragment (with fragment offset 0) was matched. * Introduced a new operation to get both setname and family, from Jozsef. ip[6]tables set match and SET target need to know the family of the set in order to reject adding rules which refer to a set with a non-mathcing family. Currently such rules are silently accepted and then ignored instead of generating an error message to the user. * Reworked extensions support in ipset types from Jozsef. The approach of defining structures with all variations is not manageable as the number of extensions grows. Therefore a blob for the extensions is introduced, somewhat similar to conntrack. The support of extensions which need a per data destroy function is added as well. * When an element timed out in a list:set type of set, the garbage collector skipped the checking of the next element. So the purging was delayed to the next run of the gc, fixed by Jozsef. * A small Kconfig fix: NETFILTER_NETLINK cannot be selected and ipset requires it. * hash:net,net type from Oliver Smith. The type provides the ability to store pairs of subnets in a set. * Comment for ipset entries from Oliver Smith. This makes possible to annotate entries in a set with comments, for example: ipset n foo hash:net,net comment ipset a foo 10.0.0.0/21,192.168.1.0/24 comment "office nets A and B" * Fix of hash types resizing with comment extension from Jozsef. * Fix of new extensions for list:set type when an element is added into a slot from where another element was pushed away from Jozsef. * Introduction of a common function for the listing of the element extensions from Jozsef. * Net namespace support for ipset from Vitaly Lavrov. * hash:net,port,net type from Oliver Smith, which makes possible to store the triples of two subnets and a protocol, port pair in a set. * Get xt_TCPMSS working with net namespace, by Gao feng. * Use the proper net netnamespace to allocate skbs, also by Gao feng. * A couple of cleanups for the conntrack SIP helper, by Holger Eitzenberger. * Extend cttimeout to allow setting default conntrack timeouts via nfnetlink, so we can get rid of all our sysctl/proc interfaces in the future for timeout tuning, from me. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Oct, 2013 28 commits
-
-
Eric Dumazet authored
While working on tcp listener refactoring, I found that it would really make things easier if sock_common could include the IPv6 addresses needed in the lookups, instead of doing very complex games to get their values (depending on sock being SYN_RECV, ESTABLISHED, TIME_WAIT) For this to happen, I need to be sure that tcp6_timewait_sock and tcp_timewait_sock consume same number of cache lines. This is possible if we only use 32bits for tw_ttd, as we remove one 32bit hole in inet_timewait_sock inet_tw_time_stamp() is defined and used, even if its current implementation looks like tcp_time_stamp : We might need finer resolution for tcp_time_stamp in the future. Before patch : sizeof(struct tcp6_timewait_sock) = 0xc8 After patch : sizeof(struct tcp6_timewait_sock) = 0xc0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrea Merello authored
This patch allows (optionally, via ethtool) the atl1e NIC to: - Receive bad frames (runt, bad-fcs, etc..) - Receive full frames without stripping the FCS. This has been tested on my board by injecting runt and bad-fcs frames with a FPGA-based device. The particular scenario of receiving very short frames (<4 bytes) without passing FCS to the upper layer has been also tested: This could be potentially dangerous because the driver performs a 4 byte subtraction on the frame length, but I finally have NOT added anything to avoid this because it seems the NIC always discards frames so much short.. If someone still have some reason to worry about this, please tell me.. I will add an explicit SW check.. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xose Vazquez Perez authored
0411,0241 RT5572 BUFFALO WI-U2-300D Wireless LAN Adapter 0789,0170 RT3572 Logitec LAN-W300AN/U2 0846,9013 RT3573 NETGEAR Adaptador USB Inalambrico Movistar 0df6,006e RT3573 Sitecom WiFi USB adapter N900 2001,3c1f RT3573 D-Link DWA-162 Wireless N900 Dual Band Adapter 2001,3c20 RT5372 D-Link DWA-140 Wireless N USB Adapter(rev.D) 2001,3c21 RT5572 D-Link DWA-160 Xtreme N Dual Band USB Adapter(rev.C) 2001,3c22 RT5372 D-Link DWA-132 Wireless N USB Adapter(rev.B) 2001,3c23 RT5372 D-Link GO-USB-N300 Wireless N Easy USB Adapter 2019,ab29 ? Planex GW-USMirco300 20f4,724a RT5572 TRENDnet N600 Wireless Dual Band USB Adapter Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Now that rtl_phy_scan_operation_backup() exists, convert rtl8188ee to use it. Routine rtl88e_phy_scan_operation_backup() is no longer used and is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Now that rtl_phy_scan_operation_backup() exists, convert rtl8723ae to use it. Routine rtl8723ae_phy_scan_operation_backup() is no longer used and is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Now that rtl_phy_scan_operation_backup() exists, convert rtl8192de to use it. Routine rtl92d_phy_scan_operation_backup() is no longer used and is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Drivers rtl8192ce and rtl8192cu no longer rely on this routine. It is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Now that rtl_phy_scan_operation_backup() exists, convert rtl8192ce to use it. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Now that the routine exists in driver rtlwifi, convert rtl8192cu to use it. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Several of the drivers supported by rtlwifi individually implement the same routine that supports scans. As a first step, create this routine in driver rtlwifi. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
This completes removal of all places that reference variable 'noise' in the rtl_stats struct. The definition of the struct is unchanged. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8188ee/hw.c drivers/net/wireless/rtlwifi/rtl8188ee/hw.c:149 _rtl88ee_set_fw_clock_on() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/rtl8188ee/hw.c:149 _rtl88ee_set_fw_clock_on() info: ignoring unreachable code. This info message is the result of a real error due to a missing break statement in a "while (1)" loop. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.10+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Smatch displays the following: CHECK drivers/net/wireless/rtlwifi/usb.c drivers/net/wireless/rtlwifi/usb.c:458 _rtl_usb_rx_process_agg() warn: assigning (-98) to unsigned variable 'stats.noise' drivers/net/wireless/rtlwifi/usb.c:503 _rtl_usb_rx_process_noagg() warn: assigning (-98) to unsigned variable 'stats.noise' drivers/net/wireless/rtlwifi/usb.c:596 _rtl_rx_get_padding() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/usb.c:596 _rtl_rx_get_padding() info: ignoring unreachable code. The variable 'stats.noise' is not used, thus the initializers are removed. The unreachable code info is fixed by including the appropriate section inside #ifdef .. #endif constructions. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Smatch reports the following: CHECK drivers/net/wireless/rtlwifi/pci.c drivers/net/wireless/rtlwifi/pci.c:739 _rtl_pci_rx_interrupt() warn: assigning (-98) to unsigned variable 'stats.noise' The variable 'stats.noise' is not used. That initializer is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:551 rtl92c_dm_pwdb_monitor() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:551 rtl92c_dm_pwdb_monitor() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:870 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:870 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:882 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:883 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:891 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:892 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 The unreachable code message is fixed by deleting the code that follows a return. The errors are fixed by increasing the size of txpwr_level. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8192cu/trx.c drivers/net/wireless/rtlwifi/rtl8192cu/trx.c:367 _rtl_rx_process() warn: assigning (-98) to unsigned variable 'stats.noise' This variable is unused, thus the initializer is removed, as well as a comment referring to that variable. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8192de/hw.c drivers/net/wireless/rtlwifi/rtl8192de/hw.c:1200 rtl92de_set_qos() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/rtl8192de/hw.c:1200 rtl92de_set_qos() info: ignoring unreachable code. The dead code is deleted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8192de/dm.c drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1054 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'ofdm_index' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1056 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'ofdm_index' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1126 rtl92d_dm_txpower_tracking_callback_thermalmeter() debug: remove_pools: nr_children over 4000 (4596). (rtlpriv->dbg.global_debuglevel merged) drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1126 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1129 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1132 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1135 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1138 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1141 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1144 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1147 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1151 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1154 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1157 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1160 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1163 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1166 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1169 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1172 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 This patch fixes several off-by-one errors. It also removes a comment referencing variable 'noise' in the rts_stats struct. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Add support for new RF chip ID: 3070. It seems to be the same as 5370, maybe vendor just put wrong value on the eeprom, but add this id anyway since devices with it showed on the marked. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The brcmfmac has common and bus specific part. The rx function api was using sk_buff_head. Changed to sk_buff instead. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hante Meuleman authored
SDIO firmware download routines uses one name for firmware file and nvram file for all sdio devices. This is not user friendly. Use fw filename and nvram filename based upon chip id and revision. Reported-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The definition of BRCMF_EVENTING_MASK_LEN results in a sparse error message .../fweh.c:331:22: error: bad constant expression .../fweh.c:388:22: error: bad constant expression .../dhd_common.c:256:22: error: bad constant expression This is caused by the use of roundup() in BRCMF_EVENTING_MASK_LEN and it is used to allocate an array variable on the stack. Better use DIV_ROUND_UP() macro. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
Bus layer need to share sk_buff::cb with firmware signal feature. Reserve necessary memory so they won't overwrite each other. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
Perform a valid check for core index to avoid illegal address access. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
BCM4339 is an a/b/g/n/ac 1x1 WiFi chip. This patch adds support for it through SDIO interface. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
Update event list to keep sync with firmware development. Use calculated event mask length instead of hard-coded value. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
-